Related
Hello
I just recently got the optimus 3d. its brilliant!
With the help of this forum I've managed to root and get Clockwork then install thais rom.
amazing speed increase.
But i have just one issue.
My phone was locked to orange uk provider. when i bought the phone I had to call orange to have my phone 'activated'
only after i did that did the phone even receive a signal.
before that it just said emergency call only, or no signal.
now, i've unlocked the phone using a code. it now says no personalization when i check the lock menu.
but: when i insert another sim, vodaphone uk or 3 uk, it says emergency call only or no network.
whats going on?
please help...
thanks
after a search it seems other people also have this issue with no reply.
did anyone else have this problem and fix it?
pauliebb said:
Hello
My phone was locked to orange uk provider. when i bought the phone I had to call orange to have my phone 'activated'
only after i did that did the phone even receive a signal.
before that it just said emergency call only, or no signal.
now, i've unlocked the phone using a code. it now says no personalization when i check the lock menu.
but: when i insert another sim, vodaphone uk or 3 uk, it says emergency call only or no network.
whats going on?
please help...
thanks
Click to expand...
Click to collapse
The activation bit is for the sim card, I have a phone locked to O2 and what happens is you register the sim with them and then they enable it to use their network which is why until then it will say no network.
It is also the reason why if you put any other sim in the phone, and that sim has not yet been used to make calls, you get the same error.
As for the personalisation message on the unlock menu, I am unsure what you mean by the lock menu. I assume you mean the screen you see before you unlock your phone to use it each time, and did a search on google which produced no results but I would guess that if you are using a custom rom the message means you either have not personalised your screen or that the option is there to personalise it but has not been used.
Dave
mistermentality said:
The activation bit is for the sim card, I have a phone locked to O2 and what happens is you register the sim with them and then they enable it to use their network which is why until then it will say no network.
It is also the reason why if you put any other sim in the phone, and that sim has not yet been used to make calls, you get the same error.
As for the personalisation message on the unlock menu, I am unsure what you mean by the lock menu. I assume you mean the screen you see before you unlock your phone to use it each time, and did a search on google which produced no results but I would guess that if you are using a custom rom the message means you either have not personalised your screen or that the option is there to personalise it but has not been used.
Dave
Click to expand...
Click to collapse
unlock menu - where you enter the network unlock code.
i'm trying to use my 3 uk sim, its been on contract for over 2 years.
I know that a lot of unlocked phones wont work with 3, if you google 3 unlock you will find a lot of people have problems and some unlock companies even specify they wont unlock to 3 network but if it does the same with non 3 cards or only works with one operator perhaps the unlock was only partial?
I did a search for pedsonalisation and all I found were various unlock sites saying that a sucessful unlock needs you to have a personalisation menu.
My previous android phone had a device lock and a sim lock, could it be your unlock has only partially worked? Is it only one provider whose network you can access?
Dave
mistermentality said:
I know that a lot of unlocked phones wont work with 3, if you google 3 unlock you will find a lot of people have problems and some unlock companies even specify they wont unlock to 3 network but if it does the same with non 3 cards or only works with one operator perhaps the unlock was only partial?
I did a search for pedsonalisation and all I found were various unlock sites saying that a sucessful unlock needs you to have a personalisation menu.
My previous android phone had a device lock and a sim lock, could it be your unlock has only partially worked? Is it only one provider whose network you can access?
Dave
Click to expand...
Click to collapse
you're being really helpful so i give thanks.
i have tried o2 and vodafone sims in the phone also but to no avail... always says emergency only or no network, with both showing no signal.
would flashing the original orange rom back then retrying the lock code help? as of right now when i go to the unlock menu and click network lock it prompts a message stating my phone has no personalization.
sorry missed out a little bit of info.
the only network that works is orange, it gets full signal and works perfect, but i'd really like to use my contract sim instead of pay as you go extra on orange.
I've done some more searching and found that on a lot of phones that personalisation message means the phone unlock has failed and that after a successful unlock it should say something like "network lock has been personalised".
You do only get a certain number of tries so don't enter the code over and over, if you are sure you entered it correctly it means the code you got just didn't work (I had that when unlocking my previous LG and had to buy a code from somewhere else as the first one didn't work at all).
I am not recommending this site, it's just one that explained how to unlock so am posting a link in case it helps, but the site says you need to enter two codes on an Optimus 3D. One is for network lock and one for service provider lock, I know that some people on the xda forums have unlocked their phones so I hope they will jump in and help solve your problem as really all I can do is google for the bits I am unsure of but it would seem your code did not work, or that you need two codes and only had one.
Dave
mistermentality said:
I've done some more searching and found that on a lot of phones that personalisation message means the phone unlock has failed and that after a successful unlock it should say something like "network lock has been personalised".
You do only get a certain number of tries so don't enter the code over and over, if you are sure you entered it correctly it means the code you got just didn't work (I had that when unlocking my previous LG and had to buy a code from somewhere else as the first one didn't work at all).
I am not recommending this site, it's just one that explained how to unlock so am posting a link in case it helps, but the site says you need to enter two codes on an Optimus 3D. One is for network lock and one for service provider lock, I know that some people on the xda forums have unlocked their phones so I hope they will jump in and help solve your problem as really all I can do is google for the bits I am unsure of but it would seem your code did not work, or that you need two codes and only had one.
Dave
Click to expand...
Click to collapse
just wondering if i could post a video link here to show how it happens, if not, mods can you delete this link:
http://videobam.com/YqMQH
might need to tilt head/computer screen
that was with orange sim, without orange sim it shows no signal and no network... its running thais rom.
heres a video of it using another sim.
when i start the phone with other sim, it prompts whether i'd like to use mobile data or not, but no connection!
pauliebb said:
just wondering if i could post a video link here to show how it happens, if not, mods can you delete this link:
http://videobam.com/YqMQH
might need to tilt head/computer screen
that was with orange sim, without orange sim it shows no signal and no network... its running thais rom.
heres a video of it using another sim.
when i start the phone with other sim, it prompts whether i'd like to use mobile data or not, but no connection!
Click to expand...
Click to collapse
http://videobam.com/ScZMP
Well having watched your videos I can clear up something, I think.
I had searched for terms based around "no personalisation available" which means your code did not work but searching for the actual message in the video "your phone is not personalised" produced completely different results.
That specific message means the option you are clicking on is not locked (not personalised by your provider) at least according to various pages I have found including a few on other well known Android forums so if that's correct your unlock did actually work and that is why the message appears.
The page at http://www.cpkb.org/wiki/LG_enter_NCK_code also mentions this code and its cause.
If the other sims you try offer you data or mobile but do not connect, yet you can make calls, then you need to set up your apn for that provider. The apn tells your phone how to connect to your provider.
This is really easy to do but you will need a free app called Apn global from the android market at https://market.android.com/details?id=osatek.apn.global obviously you need it on your device which can be done in various ways, possibly easiest if you can connect via wifi and go to the market.
Install and run it, pick the name of your provider (the provider whose sim you wish to use) and it will create the mms and internet settings for you. Then mobile data should work.
Alternatively if you have an android phone which you already use that sim on, install to that phone and choose the apps backup option which will backup your exact settings to sd card so you can import them to another android phone.
If you have other providers apns on there you will probably need to tell the phone to use your new settings. Simply go to your phones settings menu, find the wireless settings option and click it then scroll down the screen to "mobile networks" and click that. Then click "Access point names" and choose the desired provider. I have three on my phone and you can always revert to any other settings if you change provider later.
The apn app is very useful, I have used it on a few phones, it has a large list of providers worldwide so you should find your choice of provider there and hopefully that will solve your problem.
Dave
Thanks for the reply dave, but I have yet more bad news sadly.
I can't actually make calls, as shown in the second video it shows no network/emergency calls only.
It's hard to believe no-one else has this issue.
I have owned lots of android in the past(started with g1, then hero, then jumped to zte blade then galaxy 1, now this) none of them posed any difficulty removing network lock.
Its such a strange problem that a search of this forum shows at least one other person had this issue but no-one could help.
Sorry if this sounds stupid but have you gone into the settings menu on your phone (Settings/Wireless and Networks/Mobile Networks/) and chosen the "select your network provider" option?
There you can force your phone to use a specific network provider.
Dave
mistermentality said:
Sorry if this sounds stupid but have you gone into the settings menu on your phone (Settings/Wireless and Networks/Mobile Networks/) and chosen the "select your network provider" option?
There you can force your phone to use a specific network provider.
Dave
Click to expand...
Click to collapse
I have with error "Unable to connect to this network at this time. Please try again later."
I don't think I can help, though I did some more googling and on the cyanogen mod forums someone posted a similar problem....
I've been using the nightly builds of CM7 since they came out and have had no network problems. I then installed version 7.0 [stable] when it came out, and just yesterday I installed version 7.0.3 [stable].
I have had no signal since, and whenever I try and select my network from the Settings > Wireless & Networks > Mobile Networks > Network Operators, it comes up saying "Unable to connect to this network at this time. Please try again later.".
It is nothing to do with my network provider, as my brother's phone works fine and he is on the same network as me.
I am on Three Mobile.
Please help!
RESOLVED: I just wiped all userdata and reflashed CM 7.0.3, I'm a very impatient person
Click to expand...
Click to collapse
If you fail to get a solution this option may help but probably best as a last resort. One thing I did notice when watching your second video is that you have the wireless on, this will stop your phone connecting to any providers mobile data so at least as far as mobile data goes you won't be able to use it when connected to wifi and would have to switch wifi off in order to test the mobile data connection.
Also I know that on my O3D my wireless sometimes seems to cause my phone signal to switch off with the little x. I doubt that is the cause of your problem but may be worth trying to connect with no wifi.
Dave
mistermentality said:
I don't think I can help, though I did some more googling and on the cyanogen mod forums someone posted a similar problem....
If you fail to get a solution this option may help but probably best as a last resort. One thing I did notice when watching your second video is that you have the wireless on, this will stop your phone connecting to any providers mobile data so at least as far as mobile data goes you won't be able to use it when connected to wifi and would have to switch wifi off in order to test the mobile data connection.
Also I know that on my O3D my wireless sometimes seems to cause my phone signal to switch off with the little x. I doubt that is the cause of your problem but may be worth trying to connect with no wifi.
Dave
Click to expand...
Click to collapse
I'm going to try reinstall the original orange rom that came with it and downgrade baseband, if that fails to work after a full reinstall using lgflashtool I'll have to try get another phone.
thanks for all your help dave, i really appreciate it!
A popular unlock site says the only steps needed to unlock to any network are...
1. Input a non accepted simcard
2. Phone will display enter “Sim network unlock PIN” or “Enter Network Unlock Code”
3. Input the 8 or 16 digit unlock code that was emailed to you
4. Phone is unlocked!
If you did this, which you obviously have, your phone is unlocked and the problem must be something else but if you're going to flash a copy of the orange rom you might want to check first with one of the more knowledgeable users here that the rom won't replace some of the locks you already removed.
I checked around and from what I have found it should be as easy as put the new providers apn on your phone, select their settings from mobile networks menu for provider and also mobile data and that should work.
One orange customer who unlocked a different model android phone found that all they had to do was flash the radio only (not the rom), not sure how you do that but there are probably guides on xda.
Dave
I flashed the original orange rom and after flashing the froyo basrband it suddenly worked. Flashed gb again and it still worked, seems i just hsd to reflash basebsnd/radio like you said.
Thank you so much
Sent from my LG-P920 using Tapatalk
Hi pauliebb,
I have the same problem that you had. I bought a used unlock O3D vodafone ES to gift to my brother, he lives in south america and he told me that the mobile does not recognize his SIM. What did you exactly do you did to reflash the baseband firmware???
I supposed thet the mobile is unlock because it shows the same message when enter to the unlock options "phone is not personalised"
Regards
the same problem
i have the same problem, i have phone from plus gsm poland, phone is not personalizet but read only sim card from plus, diffrent card not read and show info no sim card, help me how resolve this problem?
Hi to all,
I have a Motorola Razr HD (xt925) with SlimKat 4.4.2 installed (Slim-xt925-4.4.2.build.4-OFFICIAL-3648), baseband version: VANQUISH_U_BP_100700.220.65.33P.
I'm starting the papers to switch from one company to another, and because the contract is over, my actual company gave me the 8 digit code to unlock the network, so I can use with any another one.
Here starts the problem, I inserted a SIM from the another company (one that uses my brother on a Moto G, already working) to my xt925 and the "SIM network unlock PIN" pop-up never appears (even after rebooting), so I can't unlock the network.
Any ideas where to go? Is a problem of the ROM or something else?
Thanks for all the support.
trisstribs said:
Hi to all,
I have a Motorola Razr HD (xt925) with SlimKat 4.4.2 installed (Slim-xt925-4.4.2.build.4-OFFICIAL-3648), baseband version: VANQUISH_U_BP_100700.220.65.33P.
I'm starting the papers to switch from one company to another, and because the contract is over, my actual company gave me the 8 digit code to unlock the network, so I can use with any another one.
Here starts the problem, I inserted a SIM from the another company (one that uses my brother on a Moto G, already working) to my xt925 and the "SIM network unlock PIN" pop-up never appears (even after rebooting), so I can't unlock the network.
Any ideas where to go? Is a problem of the ROM or something else?
Thanks for all the support.
Click to expand...
Click to collapse
Leave the SIM for about 30 minutes and if the unlock screen does not show, dial #073887* to make the network code request appear. I got this information from an unlock service website. I do not know if I can mention it on the forum.
goldfinsh said:
Leave the SIM for about 30 minutes and if the unlock screen does not show, dial #073887* to make the network code request appear. I got this information from an unlock service website. I do not know if I can mention it on the forum.
Click to expand...
Click to collapse
Leaving the SIM for about 30 min achieves nothing, and calling to that USSD number it just tries to call like it were a regular number (with any SIM).
Probably the best option that I have is back to the stock ROM, and see if there the network unlock PIN screen pops-up
Many thanks for the help. Really appreciated.
trisstribs said:
Leaving the SIM for about 30 min achieves nothing, and calling to that USSD number it just tries to call like it were a regular number (with any SIM).
Probably the best option that I have is back to the stock ROM, and see if there the network unlock PIN screen pops-up
Many thanks for the help. Really appreciated.
Click to expand...
Click to collapse
Hi trisstribs,
I have tried to unlock my xt925 but have the same problem you described where the prompt to enter the unlock code never comes up. Most technical support folks including Motorola suggest Factory Resetting, however I don't believe it will help. One tech support I spoke with agrees, saying that a Factory Reset will not make a difference because the unlock prompt initiates at the firmware level. Firmware runs before any android software. Just wondering if you were able to address this issue with your xt925.
Thx
I have one galaxy s8 which was claimed to be unlocked b4 buying it,put in my sim and it's writing "invalid sim card,sim card not supported"if i go to settings and search for available networks,it will bring different networks but wont allow me to register on it.if i try to call...it will say "not registered on network"
I made an enquiry and they said if it is locked,it should prompt for an unlock code immediately i put my sim inside.even if i wana unlock again,d phone is not asking for any unlock code neither is it asking for unfreeze code.i also tried secret codes with it and it is not working #7465625*638#.it is a branded at&t phone
You may need to configure the APN for the new carrier manually. Go to settings, connections, mobile network, then APN (Access Point Names), select add and type in new APN settings.
However if that doesn't work, It may be hard locked. Meaning that an invalid sim unlock code was entered too many times. In my past experiences if it doesn't prompt you for the code when you enter a new sim card it is either hard locked or already unlocked and needs the APN settings configured. However after inserting a new sim card the phone would normally configure the APN automatically and only on occasion would I need to modify it to get data/text working properly.
Sent from my SM-G955U using Tapatalk
invalid sim card,sim card not supported means it is locked device, i would like to help you to unlock it if you're interested
I'm facing this same issue. When I got the phone I installed an unbranded firmware (XAA/XAA/ATT) and I've since upgrade to Oreo. I can't seem to restore an ATT firmware so I can be prompted to enter the unlock code. Any suggestions?
make sure you using non at&t sim and it must be an active sim card. submit an unlock request to at&t on their website or use an unlock service like attunlocker.us to get your code.
andykit said:
make sure you using non at&t sim and it must be an active sim card. submit an unlock request to at&t on their website or use an unlock service like attunlocker.us to get your code.
Click to expand...
Click to collapse
The issue is there's no prompt to enter the unlock code.
is the SIM card active that you are using? what SIM is it?
markgm said:
The issue is there's no prompt to enter the unlock code.
Click to expand...
Click to collapse
andykit said:
is the SIM card active that you are using? what SIM is it?
Click to expand...
Click to collapse
Yes, it's a T-mobile SIM.
Sorry to necro, but does no one have a solution for this? I've seen plenty of threads such as this but very few solutions.
Necro double-post, I'm really asking for it...
First, you have to get an unlock code from the carrier. I had AT&T and it told me my phone was active under an account (previous owner). When you call AT&T and ask for an ulock they loop you to the website and you can't progress there, so you just have to ask for "customer service" twice and then get to the second level support. They can get you an 8 digit code for unlock. But I still never got prompted for the code and neither AT&T (5 calls), Cricket (3 calls), or xFinity (3 calls) could tell me how to get to the unlock screen. The following did it.
My solution was to use the following method, as found on https://www.tenorshare.com/samsung/samsung-unlock-code.html:
Step 1: Open the phone and type #7465625*638*# in the dialer.
Step 2: Then, it will ask for the Samsung Reset Code, it is an 8-digit code.
Step 3: Provide it and you will be done.
I have one galaxy s8 which was claimed to be unlocked b4 buying it,put in my sim and it's writing "invalid sim card,sim card not supported"if i go to settings and search for available networks,it will bring different networks but wont allow me to register on it.if i try to call...it will say "not registered on network"
I made an enquiry and they said if it is locked,it should prompt for an unlock code immediately i put my sim inside.even if i wana unlock again,d phone is not asking for any unlock code neither is it asking for unfreeze code.i also tried secret codes with it and it is not working #7465625*638#.it is a branded at&t phone
You can fix this. Or at least you can try to fix it.
Check this guide, there are several methods you can follMod Edit
Hi all. I just bought a S10e (G970U, Snapdragon) from China in order to use it in Spain, with Orange as a carrier. Once I set it up, everything worked fine for about 20 seconds. After that, the mobile data locked down. When I try to turn it up again the device says: "Security policy prevents use of mobile data". I tried to factory reset it several times, try different google accounts, try different SIMs, erase the data from some SIM- and network-related apps, but nothing changes. I guess that this has something to do with Samsung Knox.
What should I do? Is recommendable to contact Samsung support? Can I flash another firmware/ROM that fix this issue? Thanks a lot, any help is appreciated.
PS: Calls and SMS are also locked.
@txordi
Maybe this will help?
https://www.samsung.com/nz/support/mobile-devices/security-policy-updates/
djg269 said:
@txordi
Maybe this will help?
https://www.samsung.com/nz/support/mobile-devices/security-policy-updates/
Click to expand...
Click to collapse
Hi. Thanks a lot for your help! I tried it and nothing changed. Indeed, the security policies were already updated out of the box...
I had the same problem. I had a signal but could not send/receive SMS or calls. After talking with carrier tech support and Samsung, I went to a UbreakIfix store, where they told me the 10e phones have a problem with the antenna on the motherboard. They said I needed to send the phone back to Samsung to get the mobo replaced. I just sent it back to the seller and bought an S20.
Also on S10+
I'm having the same problem on my GM-975U1 S10+. Basically mobile data and texting works long enough to authenticate into the Samsung account during setup, but once the android home screen appears after finishing the setup I can't place any calls and trying to enable mobile data gives a "Security policy prevents use of mobile data" error when attempting to enable it. Neither AT&T or Samsung have given instructions on how this can be fixed. It's behaving similarly to if the phone's IMEI were on a blacklist, but I get immediately shut out once the setup process completes.
kriegersaurusrex said:
I'm having the same problem on my GM-975U1 S10+. Basically mobile data and texting works long enough to authenticate into the Samsung account during setup, but once the android home screen appears after finishing the setup I can't place any calls and trying to enable mobile data gives a "Security policy prevents use of mobile data" error when attempting to enable it. Neither AT&T or Samsung have given instructions on how this can be fixed. It's behaving similarly to if the phone's IMEI were on a blacklist, but I get immediately shut out once the setup process completes.
Click to expand...
Click to collapse
have you found any solution yet I am having same issue with my samsung s10e and I don't even understand what app or policy is preventing me from making calls. BTW I am using clean esn phone. As soon as I pass the setup screen LTE signal goes away and it stops working.
aakashpsp said:
have you found any solution yet I am having same issue with my samsung s10e and I don't even understand what app or policy is preventing me from making calls. BTW I am using clean esn phone. As soon as I pass the setup screen LTE signal goes away and it stops working.
Click to expand...
Click to collapse
I haven't found one yet either. Apparently the phone I purchased is locked to Tracphone after paying for an IMEI lookup (got scammed by an ebay seller who said it was the unlocked model), and the phone isn't able to do calls/mobile data properly except during the initial setup. Tried with SIM cards from two different US providers that both aren't working on it, and can connect to wifi just fine. Can see in the phone information test menu by dialing *#*#4636#*#* that my sim is being recognized, shows my phone number and IMSI, can switch between network types and see the cell towers it connects to; but isn't able to send/receive calls or mobile data. It fails the Ping test with 'Fail(2)' and HTTP Client Test with 'Fail: IOException'.
It's also showing that the phone receives a call inside of the Service Mode menu by dialing *#197328640# and going to '[1] BASIC INFORMATION'. Placing a call from another phone shows that my S10+ is picking up LTE bands and has some RF parameters that change when my number is being dialed, but don't get the option to pick up the call. It's also able to detect that I have a voicemail but am not able to dial in and listen to it. The Tx Pwr says '-- dBm' so I ultimately can't tell if it's a software or a hardware problem.
kriegersaurusrex said:
I haven't found one yet either. Apparently the phone I purchased is locked to Tracphone after paying for an IMEI lookup (got scammed by an ebay seller who said it was the unlocked model), and the phone isn't able to do calls/mobile data properly except during the initial setup. Tried with SIM cards from two different US providers that both aren't working on it, and can connect to wifi just fine. Can see in the phone information test menu by dialing *#*#4636#*#* that my sim is being recognized, shows my phone number and IMSI, can switch between network types and see the cell towers it connects to; but isn't able to send/receive calls or mobile data. It fails the Ping test with 'Fail(2)' and HTTP Client Test with 'Fail: IOException'.
It's also showing that the phone receives a call inside of the Service Mode menu by dialing *#197328640# and going to '[1] BASIC INFORMATION'. Placing a call from another phone shows that my S10+ is picking up LTE bands and has some RF parameters that change when my number is being dialed, but don't get the option to pick up the call. It's also able to detect that I have a voicemail but am not able to dial in and listen to it. The Tx Pwr says '-- dBm' so I ultimately can't tell if it's a software or a hardware problem.
Click to expand...
Click to collapse
I am facing the same exact issue my sim number it shows inside the phone and signal I am getting is in negative dbm also my sim receives calls during the initial setup and as soon as the setup completes the LTE network goes away call gives error " call not sent". I am irritated by this now and there is no root available for this model so I cannot flash any custom rom to check. I have seen many people have same issue but no solution yet.
If your phone locked to a particular network, ie TracFone,AT&T, TMobile, Cricket, etc, then that is only network it will work on. Doesn't matter what custom ROM you use. You will need to get the network unlock code either from the network it's locked to or from a reputable online unlock site. Good luck getting it unlocked.
riggerman0421 said:
If your phone locked to a particular network, ie TracFone,AT&T, TMobile, Cricket, etc, then that is only network it will work on. Doesn't matter what custom ROM you use. You will need to get the network unlock code either from the network it's locked to or from a reputable online unlock site. Good luck getting it unlocked.
Click to expand...
Click to collapse
my device is already unlocked. It is not an unlocked phone issue. This is some stupid policy which is preventing from making calls or using data. Maybe this policy is saved in EFS don't know.
aakashpsp said:
my device is already unlocked. It is not an unlocked phone issue. This is some stupid policy which is preventing from making calls or using data. Maybe this policy is saved in EFS don't know.
Click to expand...
Click to collapse
That's strange, it's acting exactly like a network locked device. When you say it's unlocked, are referring to the bootloader or network? Did you buy it new, unlocked from a reputable dealer? Check the firmware and make sure it is unlocked. There are other thread here with the same issue and message, those are all network locked phones.
riggerman0421 said:
That's strange, it's acting exactly like a network locked device. When you say it's unlocked, are referring to the bootloader or network? Did you buy it new, unlocked from a reputable dealer? Check the firmware and make sure it is unlocked. There are other thread here with the same issue and message, those are all network locked phones.
Click to expand...
Click to collapse
I don't know I bought it from mercari that seller told me it is tmobile unlocked, but while checking I found the model number is G970U1. csc is XAA and binary U4. Bootloader is locked. Networks seems to be unlocked as when I put it my sim card it works till initial setup screen and then stops working. I searched it maybe locked to Consumercellular but is there any way I can unlock it ? I didn't find anything online.
Sounds like the seller lied to you.
Is there any way to unlock CC device ? I am on Binary u4. I am able to flash both g970u and g970u1 firmware but no success.
riggerman0421 said:
That's strange, it's acting exactly like a network locked device. When you say it's unlocked, are referring to the bootloader or network? Did you buy it new, unlocked from a reputable dealer? Check the firmware and make sure it is unlocked. There are other thread here with the same issue and message, those are all network locked phones.
Click to expand...
Click to collapse
My S10+ model G975U is network unlocked, with the bootloader locked. I bought a network unlock code, but am getting the same behavior where the intial setup allows me to sign into my Samsung account when putting in both an ATT and T-Mobile sim card. I've also tried reflashing it with several different firmwares both carrier locked and unlocked, but this phone has been sitting in my drawer for the past month since it's unusable. Probably will end up trading it in since I was scammed by the random ebay seller I bought this from.
kriegersaurusrex said:
My S10+ model G975U is network unlocked, with the bootloader locked. I bought a network unlock code, but am getting the same behavior where the intial setup allows me to sign into my Samsung account when putting in both an ATT and T-Mobile sim card. I've also tried reflashing it with several different firmwares both carrier locked and unlocked, but this phone has been sitting in my drawer for the past month since it's unusable. Probably will end up trading it in since I was scammed by the random ebay seller I bought this from.
Click to expand...
Click to collapse
I'm having the exact same issue. Bought s10+ off ebay for 200 locked to consumer cellular. Bought an unlock code. It said unlock successful. Now get this error with any sim. It will show lte during initial setup only.
It will show that it's at&t or verizon when I put the sim in and populate the proper apn settings.
Before the unlock I would get the sim not provisioned error.
I did have to look up the dial code to make the unlock code window appear.
Now i can't actually use any service and i get the security policy error.
Finally was able to find the xaa firmware which seems to be the exact firmware on it.
Then lash that as no other u1 firmware would flash.
txordi said:
Hi all. I just bought a S10e (G970U, Snapdragon) from China in order to use it in Spain, with Orange as a carrier. Once I set it up, everything worked fine for about 20 seconds. After that, the mobile data locked down. When I try to turn it up again the device says: "Security policy prevents use of mobile data". I tried to factory reset it several times, try different google accounts, try different SIMs, erase the data from some SIM- and network-related apps, but nothing changes. I guess that this has something to do with Samsung Knox.
What should I do? Is recommendable to contact Samsung support? Can I flash another firmware/ROM that fix this issue? Thanks a lot, any help is appreciated.
PS: Calls and SMS are also locked.
Click to expand...
Click to collapse
I'm from the Philippines and my niece phone is network lock ( Smart Telecom ) I can use the sim 2 slot since it's a dual sim using another network Simcard, unfortunately, it won't allow me to use mobile data so I tried unlocking it *#272*IMEI FROM SIM 1 SLOT# so I choose GLB for globe network or XTC to openline so here's what happens, it got reset so upon set up yeah other sim works have data but when finish setting up everything I can use data again on other network and a message pop up
Security policy prevents use of mobile data
so I guess even it allows other network Simcard on network lock phone it needs to be unlocked by the network where it was lock
Did anyone ever find a solution to this problem?
I'm having the exact same problem with a new samsung s10e I just bought. Security policy prevents use of mobile data, and no calls or sms will go through. LTE shows on setup, but disappears as soon as setup is complete.
I initially assumed the phone was locked, but the seller is reputable and insists it is unlocked. It's also a U1 model, and an IMEI lookup appears to show that it's unlocked. In connection settings under mobile networks, i'm also able to select multiple carriers, so I'm inclined to believe that the device really is unlocked.
Anybody here ever manage to solve this problem, or am I SOL? I would hate to be out 200 bucks on this phone since i'm past the return window.
I am having same isuue with samsung not S20 ultra (SM-N986U1) I bought the mobile and its unlocked the seller send to me photo for the check screen and its open USA but can not use mobile data and make any calls when a make a call the call ended and give me screen call not sent
aniratepanda said:
Did anyone ever find a solution to this problem?
I'm having the exact same problem with a new samsung s10e I just bought. Security policy prevents use of mobile data, and no calls or sms will go through. LTE shows on setup, but disappears as soon as setup is complete.
I initially assumed the phone was locked, but the seller is reputable and insists it is unlocked. It's also a U1 model, and an IMEI lookup appears to show that it's unlocked. In connection settings under mobile networks, i'm also able to select multiple carriers, so I'm inclined to believe that the device really is unlocked.
Anybody here ever manage to solve this problem, or am I SOL? I would hate to be out 200 bucks on this phone since i'm past the return window.
Click to expand...
Click to collapse
esca91 said:
Hello everybody,
Could you share firmware of Sm-r900 ?
Thanls All for good work !
Bests regards.
Click to expand...
Click to collapse
mosaad627 said:
I am having same isuue with samsung not S20 ultra (SM-N986U1) I bought the mobile and its unlocked the seller send to me photo for the check screen and its open USA but can not use mobile data and make any calls when a make a call the call ended and give me screen call not sent
Click to expand...
Click to collapse
Yes, there is a solution, but only from an experienced professional 3rd party business, which means there's no free solution