Hello guys,
I try to be fast and clear, I´m on the latest version of BlissPop and I want to try Boeffla Kernel, I need to donwload the kernel from CM12.1 (unofficial builds and based ones) and this link right? http://boeffla.df-kunde.de/zanezam/linaro/bacon/cm12.1/test/ also I´m a bit confussed about what I should download from the link (if it´s the correct link).
Thanks in advance!!!!
This is the right link I think: http://boeffla.df-kunde.de/bacon/boeffla-kernel-cm/cm12.1_download/Test/ if your Blisspop is based on cm 12.1 (Android 5.1.1) remember that this kernel Version is just a test version.
Flatric said:
This is the right link I think: http://boeffla.df-kunde.de/bacon/boeffla-kernel-cm/cm12.1_download/Test/ if your Blisspop is based on cm 12.1 (Android 5.1.1) remember that this kernel Version is just a test version.
Click to expand...
Click to collapse
Thanks for your fast answer, I read a lot of good things about Boeffla kernel even with test version. I must dig a bit more to ensure that I have the correct link for the download before flash kernal, I come from a brick trying to change bootanimation and I don´t want more troubles
Anyway, thanks again!!
Istvan_86 said:
Thanks for your fast answer, I read a lot of good things about Boeffla kernel even with test version. I must dig a bit more to ensure that I have the correct link for the download before flash kernal, I come from a brick trying to change bootanimation and I don´t want more troubles
Anyway, thanks again!!
Click to expand...
Click to collapse
You just have to read carefully if you have the right files, it also helps if you read the last few pages of the thread if there are problems or something
Related
Hi there
I will shortly be joining either the custom rom user world or bricked phone world. :silly:
I am absolutely new to the topic and would love some advice from you all.
My phone is stock ICS and I want to switch to a ROM which is very stable and fast.
Earlier i was thinking of going for PA or Cyanogen but neither seem to officially support Motorola Atrix 2. :crying:
MoKee is the only distribution which apparently has official support for my phone.
I was wondering if there is any other ROM which officially supports Atrix 2?
How good is MoKee? Would you recommend this ROM to a newbie? From what i know, Cyanogen seems to be the easiest to install.
Also, can someone list the steps to installing Mokee?
I read the content at http://forum.xda-developers.com/showthread.php?t=2305303
but for a 1st time newb all that seems very intimidating.
thank you
Rishav
Rishav Sharan said:
I was wondering if there is any other ROM which officially supports Atrix 2?
Click to expand...
Click to collapse
All of new ROM's for our Atrix2 are fast and most of them are stable (depends on user )
& Even though CM 11 is not official for our phone, but currently it is the most stable and all bug fixed rom for our A2
(I am not saying Mokee or other ROMs are not stable, but at this stage CM 11 has all bug fixed and I am sure Mokee & other will incorporate it soon :fingers-crossed: )
Also all ROM's have same procedure to install, so all ROM's are easy to install (Thanks to BMM)
You can follow steps in that link or check this video tutorial for using BMM
"Axxiom Kat" also has official support to our device.
It doesn't matters (at least for this device) whether the ROM has official support or not, our device has a team of some Recognized Contributors and A2EPT (Atrix 2 edison porting team) which keep the ROM up to date as like it is an official ROM :victory:
So dont worry flash any ROM you want :highfive:
sameerm02 said:
All of new ROM's for our Atrix2 are fast and most of them are stable (depends on user )
& Even though CM 11 is not official for our phone, but currently it is the most stable and all bug fixed rom for our A2
(I am not saying Mokee or other ROMs are not stable, but at this stage CM 11 has all bug fixed and I am sure Mokee & other will incorporate it soon :fingers-crossed: )
Also all ROM's have same procedure to install, so all ROM's are easy to install (Thanks to BMM)
You can follow steps in that link or check this video tutorial for using BMM
"Axxiom Kat" also has official support to our device.
It doesn't matters (at least for this device) whether the ROM has official support or not, our device has a team of some Recognized Contributors and A2EPT (Atrix 2 edison porting team) which keep the ROM up to date as like it is an official ROM :victory:
So dont worry flash any ROM you want :highfive:
Click to expand...
Click to collapse
Thanks Sameer!
Guess CM11 is the best bet for me.
Btw, what is the kernel update?
Would you recommend me to go for a custom kernel now? or is it something i should attempt only when i have the hang of modding?
Rishav Sharan said:
Thanks Sameer!
Guess CM11 is the best bet for me.
Btw, what is the kernel update?
Would you recommend me to go for a custom kernel now? or is it something i should attempt only when i have the hang of modding?
Click to expand...
Click to collapse
All rom's have inbuilt custom kernel (kexec kernel), if you wanna try overclocking your device you can use JBX kernel
JBX can be flashed after ROM installtion.
But for a newbie like you dont flash it yet, first try some ROM's; when you get used to it then try JBX.
And if this helps you, dont say thanks press Thanks button below the post !!
And we have separate Q&A section for question and answers
Please dont post questions here in general section
MoKee is bug free and gps works berry good
Mokee is stable and you can try SlimKat as well
Slimkat worked best for me as far as battery life, but cm11 was best overall
atrix 2 cm11
Im kind of new here, so hi Im looking for a good custom rom to flash on my GTab 2 P3110.
Im planning to use it on my car (already got a mount for it), so I need the rom to have a working gps and have compatibility with Here Maps.
Also, it would be good if it was the latest version (Lollipop), but it can be KitKat for the sake of stability and compatibility!
I had a Nexus 7 with AutoDroid installed, but my small cousin managed to crack the screen
So yeah, that's about it. Hope you guys can help me!
solar_myth said:
Im kind of new here, so hi Im looking for a good custom rom to flash on my GTab 2 P3110.
Im planning to use it on my car (already got a mount for it), so I need the rom to have a working gps and have compatibility with Here Maps.
Also, it would be good if it was the latest version (Lollipop), but it can be KitKat for the sake of stability and compatibility!
I had a Nexus 7 with AutoDroid installed, but my small cousin managed to crack the screen
So yeah, that's about it. Hope you guys can help me!
Click to expand...
Click to collapse
Look in the Development thread for 7" tab 2. Either I've tried SlimLP and CM12.1 on my tablet as far as Lollipop goes. If you want a KitKat ROM, SlimKat is a good choice. Be sure to click thanks on @Android-Andi in the ROM thread if you choose one of those. (Always click thanks on the ROM developers OP in the ROM thread)
jrc2 said:
Look in the Development thread for 7" tab 2. Either I've tried SlimLP and CM12.1 on my tablet as far as Lollipop goes. If you want a KitKat ROM, SlimKat is a good choice. Be sure to click thanks on @Android-Andi in the ROM thread if you choose one of those. (Always click thanks on the ROM developers OP in the ROM thread)
Click to expand...
Click to collapse
I've tried both Lollipop ROMs. SlimLP causes Here to crash rly often (an user also reported that on the thread). So far, CM 12.1 is being stable as I needed. Thanked Andi already, he's an incredible guy! Also, thx for the suggestion, my friend
solar_myth said:
I've tried both Lollipop ROMs. SlimLP causes Here to crash rly often (an user also reported that on the thread). So far, CM 12.1 is being stable as I needed. Thanked Andi already, he's an incredible guy! Also, thx for the suggestion, my friend
Click to expand...
Click to collapse
No problem! I am also running CM12.1 at the moment. Make sure you edit the thread title and add "[SOLVED]" to the beginning of it before "[Q]".
Have a great weekend!
Hey guys, its been a long time since i've been here cause i moved to the g4 but now im using the opo again so im searching for the latest firmware update and the "stock"/best rom to use
I know everyone have a different favorite but im just looking for suggestion and for the most stable rom as of for now
thanks in advance
anyone?
Flash a CM13 nightly for the latest firmware. (Not gonna explain all the flashing stuff.) Then you may want to try out NAP, Jgcaap, Darkobas (Google+ community only) and if SultanXDA updates his CM13, try that one out as well.
Jeffrey98 said:
Flash a CM13 nightly for the latest firmware. (Not gonna explain all the flashing stuff.) Then you may want to try out NAP, Jgcaap, Darkobas (Google+ community only) and if SultanXDA updates his CM13, try that one out as well.
Click to expand...
Click to collapse
Thanks a lot, and I know all the flashing process just haven't visited this forum for a lot of time so wanted to ask about the recommanded stuff
Is there any method we can change the build number on the cm13 zip file we download to be able to install it on a newer version?
or is there any method for us to build the cyanogenmod 13 rom on our own(since everything is available)? It should help many people. Also if possible I would like to build an aosp rom for our devices. I have another stupid question, please bear with me. Someone has created the cyanogenmod rom for us and it is official, but they did not make any posts in the xda forums .
Im curious about some of this stuff, too. Especially the reason why you can't flash on the newer firmware, and why no CM thread.
rouyal said:
Im curious about some of this stuff, too. Especially the reason why you can't flash on the newer firmware, and why no CM thread.
Click to expand...
Click to collapse
exactly! hope to find out soon.
newer builds have a different bootloader. probably just the guy hasnt noticed because he uses cm13 which doesnt touch the bootloader
I have a few days working on a port redmi build the three as they have a similar hardware but I can not make it boot , if you can help me,the base is cm12.1.
Miui v8 for test CM12.1 BASE (No boots...):https://goo.gl/0aEIqK
Bootloop Logcat:https://drive.google.com/file/d/0B0zoxbZU58LfVmhhb21sb2NiOU0/view?usp=sharing
Dmesg:https://drive.google.com/file/d/0B0zoxbZU58LfT2VfOTBud0Zycnc/view?usp=sharing
6.6.6.10 Firmware are needed
Miui v8 for test Stock Miuiv7 BASE (Not tested for me..):https://goo.gl/CA5xCx
Newest mi4i firmware will be installed when installing the build...
Sorry for my bad English
To be honest
Most custom rom here(based on aosp)using 6.6.10 firmware ..
Take a look at yureka thread,they do the same,a dirty build ....,maybe u can use it as base
What is the reason to update just a launcher (frankly speaking MiUI for me is just well designed android launcher) and left an old android 5? Let's just wait for stable ROM from Xiaomi and pray for getting MM.
BTW thanks for the job done ?
Anyone tried it is it boot ?
shoaib1574 said:
Anyone tried it is it boot ?
Click to expand...
Click to collapse
As OP mentioned its not booting.
dont waste time with this.. they wil probably release a stable build, everyone is going bezerk as there is no dev rom, but they had discontinued dev rom bfr miui8 even released! so chances of getting a stable build is still pretty decent! so no point in doing this
ƒεηιx said:
As OP mentioned its not booting.
Click to expand...
Click to collapse
so why you post thread here ?
shoaib1574 said:
so why you post thread here ?
Click to expand...
Click to collapse
Ask OP not me
shoaib1574 said:
so why you post thread here ?
Click to expand...
Click to collapse
Thanks for being so polite.
And It's a development section, he is trying and taking help from other developers. He is NOT here to answer your queries.
Let him cook first, buddy.
Global miui 8 release date is 30 june. Hopefully we will have the developer rom for our device. No need to worry:fingers-crossed: