Database Info

HELP! ROM Manager bricked my O3D - Is it fixable?

NOTE: Before we start, I have now googled it and in hindsight I probably should of left RM alone!
Anyway as the title states my O3D seems totally goosed! I selected the recovery flash in ROM Manager for P920, it rebooted and all it does now is show the logo for a second, vibrate then off. I tried the usual tutorial stuff...
Power button, Vol up battery in - it comes up 'USB Device Unrecognised' and then It also keeps popping up 'Unknown Device' however when I click on properties every entry is 'Unavailable'
Power button, Vol Down, battery in does nothing (tried it a million times)
If I do...
Power button, Vol up then apply the battery - Device Manager finds... 'LG Mobile USB Modem', 'MAP SMS' (Other Devices) and 'LGE Mobile Composite USB Device'
No sign of OMAP44xx so the flash tools don't see it... strangely LG Mobile Support Tool sees the phone and tries to update it however it says it has the latest firmware, when I use the update recover option it gets to 15% but then complains that it can't communicate with the phone.
Is it dead? :crying:
Any help would be much appreciated.

dont worry. its not dead. has happened to my phone a trillion times ..
all you need to is try as below:
1. without connecting phone to usb first hold down 3d button then volume down and keep pressing power untill it starts up and then off again , then release all 3 together as it is off and repeat (remember first 3d then volume down and then power). this time just let the power button go on lg logo but keep pressing the other 2.
2. if this doesnt work, then easiest method - download omap4boot for optimus v1.21 or all in one p920 v1.3 by XDA, remove battery, only press down the volume up button and while pressing connect usb. make sure you hear 1 ding of connect , 1 dong of disconnect then 2 dings of connect. after this the ding dong should end .. if you have all drivers installed , then it will install omap drivers. a window will pop up and everything will have a green check. once it does that you can install a custom recovery twrp or cwm using fastboot . boot into recovery and flash a rom.
still if doesnt work, have patience, post a reply and will tell other steps to proceed with .....

Thanks for your time RVBSD, unfortunately (although I will keep trying!)
In No. 1 - I get the first logo, but when I re-apply the 3D/V and power, I don't get the second logo.
In No.2 - I get the first ding/dong then just 1 ding, no sign of Mr OMAP! - I'll keep trying though.

Once u get the second ding and then this music stops, Open device manager. Look for lg usb modem and disable it. Then look for omap44 something. The device manager may be refreshing quickly. Somehow i had a chance to right click on omap device and chose update driver. Select manual and choose omap.inf from the folder that u have to download as per my previous reply. Restart computer and check again.
Alternatively you can install all inf manually, right click and install, before connecting the device.
Let me know
Sent from my LG-P920 using xda app-developers app

Again, thanks again for your input but I am still no further. I manually clicked the inf and it said it installed fine... but nothing changed in Device Manager. I then attempted to 'force' the driver on the unknown device, however after it installed it returned a 'Code 10' error... unable to start.
Even tried the service software 'LGNPST' but it couldn't even connect to the port! ho-hum...

i tried it again. even on my computer it didnt take the omap drivers this time.... strange .....
but i could install fastboot, then installed cwm recovery . then flashed a rooted rom and its working ...
1. Turn off your Phone, pull out battery.
2. download omap4boot-for_optimus-v1.21 (run "start_fastboot.bat" (it will wait until phone connected)
3. connect phone with USB cable without battery, the usbboot will start
4. insert battery while the usbboot is waiting, it gives 5 secs only
5. unplug USB cable the LG logo will appear with fastboot on top
6. download the attached files to your desktop and extract
7. open cmd and in cmd navigate to fastboot.exe location, where ever downloaded
8. run fastboot.exe from cmd and choose the cwm file to be pushed to your phone
command : fastboot -s flash recovery recovery-clockwork-6.0.1.9-p920.img
9. reboot device into recovery , try to wipe cache and factory reset and try to reboot
if this works it will take you to existing installed rom, then you can reboot to recovery and flash Su_Bbox_1.20.2_gazhead_signed.zip to root it
10. else copy a custom rom to sd card , insert in the mobile , reboot into recovery and flash the cutom rom

PLease help
CAn you tell me how can mount recovery partition

HELP Please; soft brick

Hi everyone.
Ok back in August I purchased an Oppo r7plus "m" version not knowing the difference, from a 3rd party seller. I know I probably should've waited until the phone would go on sale in Canada but I wasn't sure if it ever would. So anyways the phone worked great for a while. I noticed that it came pre loaded with OPPO Tools and Super SU. I thought wow, this phone is rooted right of the box? Great! So I started uninstalling some native apps of which I thought were just "bloatware", everything went fine until I uninstalled the weather app.
When I turned the phone back on after restarting, it now goes into the OS but continuosly flashes on and off and you can only access the dropdown notification screen. Luckily from there I can still access the settings menu. I tried holding the power button and volume down button to go to the factory boot screen. That worked and in there its says the color os version, but in brackets says
(rooted).
I can only assume the phone is still rooted but is stuck in some sort of soft brick. I've been doing alot of reading into how I might be able to fix the phone but I'm having trouble figuring it out. I'm good with computers and all but not to this level and I never rooted an android phone before.
Please somebody HELP.

So I've downloaded the ROM for my phone model, r7 plus m, and I transfered the zip file over to the internal storage of the device. I then held down the volume down and power buttons to boot to color os recovery. Than I cleared cache and install from sd found the zip file and it started to run.
After about a minute or two into the installation it stops and reads "Installation Failed". I'm thinking I need a recovery.img file but I'm not sure. Even if I had that file I don't know what to do next.
Anyone have any ideas?

NALSONSON said:
So I've downloaded the ROM for my phone model, r7 plus m, and I transfered the zip file over to the internal storage of the device. I then held down the volume down and power buttons to boot to color os recovery. Than I cleared cache and install from sd found the zip file and it started to run.
After about a minute or two into the installation it stops and reads "Installation Failed". I'm thinking I need a recovery.img file but I'm not sure. Even if I had that file I don't know what to do next.
Anyone have any ideas?
Click to expand...
Click to collapse
Hi, how did you sort it? Are you still in need of stock recovery? I have one for model F, dont know if it works with M model.

1. Download and extract my RAR files ---> HERE
2. Open your PC device manager
3. Connect an usb cable only to your pc then press and hold the phone volume + button and then connect the usb cable to the phone
3. In the device manager you will see Qhsub_bulk then release the volume+ button
4. Right click on Qhsub_bulk and choose update driver
5. Use one of the driver folders which you alredy extract to install the Qualcomm driver and you will see it like 9008
6. Your phone have to be charged very well for a few hours before you try to flash it.
7. Remove it from the charger then connect an usb cable only to your pc.
8. Try to press and hold the volume + and power buttons at the same time for a few seconds and connect the usb cable to the phone.
9. You have to see the driver in the device manager like 9006 (you can release the buttons) [it wasn't easy for me so keep trying]
10. Open the MSMDownloader and press start
11. If everything is ok you will see a green progress bar flashing. (I was stuck here with the "NON-HLOS.bin" file which you can see in the "Other NON-HLOS File" folder inside the rom which you download)
12. When the process complete in about 10 minutes you can remove the usb cable from your phone.
13. Now you have to do a veeeeeeeery long press and hold on your power button untill you feel the vibration and after that you will see the OPPO logo.
14. Leave it for 5-10 minutes to load the Color OS.
15. Ok you have a working phone but still some apps icons that are missing and the keyboard doesn't appear when you have to write something.
16. Download THIS zipped ROM and put it in the internal storage of your phone.
17. Shut down the phone then press and hold the volume - and the power button at the same time for a while intil you enter into recovery mode.
18. Choose english and then install rom from zip file. After the installation complete reboot the phone and you will get a working keyboard and few more apps like Browser, Chinese market and else....
For me i still need to insert the IMEI's because they are lost... and now i have message: Oppo nv backup. The NV partition is invalid...
Good luck to all! And if you want to give me a beer: paypal: [email protected]

Still stuck
I still can’t detect any qhsub_bulk in device manager. Even I reformat my pc to window 7 64bit it still not detecting. What it detected was only like Android usb.
Oppo r7 plusm suspected soft brick with rooted.
- stuck at oppo logo
- try recovery with stock rom but error * failed to update*
- wipe all but still same failed to update
- try the guild here but can’t detect my device with the tool

Asus Zenfone 5 bricked after update? Stucks at logo

Hi everyone, i ask for your help cause i have a common problem but the fixes i found in the forum didn't work for me: my ZenFone 5 stucks at "Asus" logo with a loading loop wheel below that.
I know this post may be long... but i beg you to read all steps:
1) Phone stucks at logo, but could enter recovery (pressing vol + down), i've updated it via external SD card (official firmware but didn't work) then i've wiped data and did a factory reset. Phone still stucks at logo.
2) Now i can't even enter recovery mode... when pressing vol + down it shows 2 options but whatever i choose the phone reboots. If i press vol + up it says "CSC mode, long press power to restart. Phone still stucks.
3) Now (after some time) the phone's screen doesn't show anything, nor charging icon or notification led when recharging, but strangely the computer recognizes it as a device when connected via USB cable, and the led turns on when i do this.
A friend told me to follow a guide that says to install "Intel Soc USB driver", i did that. After installing, when connecting the device, 2 things should pop up in Device Manager, under "Intel Soc": "Cloverview Plus Device" and "Intel Soc USB Driver" but they don't show to me
I've also tried Asus flashtool guide... at step 4 it says to click in the box icon and choose the firmware RAW file, so i've downloaded a raw firmware for the ZenFone 5, but oddly it doesn't let me choose any raw file.
Note: the phone is recognized by the pc as "QHSUSB_BULK", so i've tried to update its driver with qualcomm drivers, and now it's recognized as "Qualcom MMC Usb storage device". But i think i've did a wrong thing cause my friend told me i should have choosed some kind of official driver
Thanks in advance for your help

Is my phone dead? Please help

So, here is the deal.
I was in middle of messaging my friend on Facebook when suddenly, my phone went to a black screen.
Model: Idol 3 6045X
OS: AlekOS 3.1
Battery: around 15% (I think, can't be positive but it was low with no sign of battery saver turning on aka no orange mode)
Rooted: Yes
I tried to reboot it in several ways, tried to charge it(notification led lights up as indication that its charging). I am out of ideas, can anyone help and guide me a way to determine if its dead or can I somehow bring it back to life.

GhostFella said:
So, here is the deal.
I was in middle of messaging my friend on Facebook when suddenly, my phone went to a black screen.
Model: Idol 3 6045X
OS: AlekOS 3.1
Battery: around 15% (I think, can't be positive but it was low with no sign of battery saver turning on aka no orange mode)
Rooted: Yes
I tried to reboot it in several ways, tried to charge it(notification led lights up as indication that its charging). I am out of ideas, can anyone help and guide me a way to determine if its dead or can I somehow bring it back to life.
Click to expand...
Click to collapse
i have same problem 7-8 months ago http://forum.xda-developers.com/idol-3/help/idol-3-wont-power-t3357134 but Panasonic firmware Helped me
Use Mobile upgrade q 5.0.6 or 5.0.3 or Panasonic firmware
Instructions for Panasonic
1.First you need the drivers so you can get from this https://drive.google.com/folderview?...TQ&usp=sharing
2.After you installed the Drivers go to. Download mode if not goes try this... Press Volume UP and Volume DOWN and connect to usb to your pc
3.Go to device Manager to view the Port ,so the port can be "Android HS-USB QDLoader 9008 (COM3)"
4.Download the Panasonic Firmware Eluga and Extract (don't worry this is the same like idol 3 only name changed)https://docs.google.com/uc?id=0B01Om...DhaSFN2aVFzaVU
5. After Extract you wil find EB-90S55EWLv1009.exe so run as administrator wait to load data
6.select 6045 and in the list down you can find your phone
7.and press the button "download"
8.So process starting ..indetifying your device you will get informations about imei..rooted or no .....
9.so automatically started to flashing the firmware (my it's go to 45 % and then i get error)
10.Don't worry press the button Reboot Device
11.and your device will reboot and you will view 'the screen powered by android and then panasonic so i get message Encrypted device just click the button "reset" and automatically device will be reseted and when wil finish with reset automatically reboots and wait to first boot you will get welcome screen set up and finished.....
12.So device successfully repaired from dead

Help!!! I'm in big trouble. Infinix Note 7 stuck on bootloop after flashing magisk

Hello,
I have infinix Note 7 (X690B) mobile which i wanted to root.
I unlocked bootloader --> Success
I flashed TWRP recovery --> Success
I booted into TWRP and installed Magisk --> Install successful
Now, i tried to reboot --> phone entered bootloop
Phone is bricked.....yes, i know. Now i want to re-install stock rom with SP Flash Tool
I tried to power it off, power btn + volume up/down, didn't work
I opened the phone and removed the battery, and immediately i connect USB to the phone, it powers ON automatically and bootloops again
Whenever i plug USB into the phone, it connects (computer makes a sound, and it also shows in device manager) and disconnects after 2 seconds (computer also makes a sound, and it disappears from device manager)
Now, this is the big problem. I can't even establish a connection between phone and PC, so that i can proceed with SP Flash tool. This looks like an impossible mission.
Please Help!!!