[Completed] kernel - XDA Assist

when i flash CM12, a new kernel is flash automatically?

Yes. I'll close this thread.

Related

[Q] Is it okay to set pacrom as first rom when dualbooting?

I used blackhawk's dual booting method, and i switched my first rom to pacman rom. It says that I need to flash blackhawk's next kernel to use dualbooting, but is it ok to flash the kernel after flashing pacman rom?

[Q] what do i need to flash the cm10.1 k 3.0.101?

Hi all,
i want to flash Cm 10.1, kernel 3.0.101
my device v. is 2.6.38.6
what do i need to flash the cm10.1 k 3.0.101?
I AM a completely NOOB..
Downlad correct zip from kernel topic and flash it with your recovery, be it cwm or twrp.

[Q] about kernels of moto g [CM12]

i am not overly familiar with many things regarding different kernels and how to work with them, so i was wishing a few questions that i had could be clarified by someone who knows:
1. when a kernel is flashed? i mean except for the times when we flash kernel.zips via recovery, is it flashed whenever we install a custom rom? or is it flashed with bootloaders when we flash firmware?
2. I am using CM12 official nightly and facing camera frizz issues. I came across a post in the official CM12 thread where they said flashing a modified kernel supposedly fixed this problem. Now my question is, after flashing a custom kernel, is there any way to go back to the stock one? by stock i mean either the one i was on right before flashing the custom kernel or stock moto g kernel provided by motorola?
that also begets the question, can kernels be backed up like roms using recovery?
gearguy365 said:
i am not overly familiar with many things regarding different kernels and how to work with them, so i was wishing a few questions that i had could be clarified by someone who knows:
1. when a kernel is flashed? i mean except for the times when we flash kernel.zips via recovery, is it flashed whenever we install a custom rom? or is it flashed with bootloaders when we flash firmware?
2. I am using CM12 official nightly and facing camera frizz issues. I came across a post in the official CM12 thread where they said flashing a modified kernel supposedly fixed this problem. Now my question is, after flashing a custom kernel, is there any way to go back to the stock one? by stock i mean either the one i was on right before flashing the custom kernel or stock moto g kernel provided by motorola?
that also begets the question, can kernels be backed up like roms using recovery?
Click to expand...
Click to collapse
1. The kernel is first flashed when you install a ROM. You are supposed to flash a custom kernel after flashing a ROM otherwise the rom zip will overwrite it. It doesn't matter if you install it in the recovery or the boot loader.
2. To go back to the stock kernel just take it from the zip of the ROM and flash in the bootloader
where can i find the kernel inside the rom zip?
and if i want the stock motorola kernel that comes with factory firmwares
how can i collect that?
A ROM.zip contains the system folder and a boot.img
The kernel is in the boot.img
So if u flash a different kernel and still facing problems then flash the ROM again.
mistercheese said:
A ROM.zip contains the system folder and a boot.img
The kernel is in the boot.img
So if u flash a different kernel and still facing problems then flash the ROM again.
Click to expand...
Click to collapse
flashing only the boot.img of a rom wont bring back the default kernel?
and is there any way to make a flashable zip of a kernel from that particualr boot.img?cause all the kernels i see (like donkey kang/customized cm12 kernel) there are all distributed in .zip format.....

[Q] What gapps to flash with Kit Kat rom?

I am currently on EuphoriaOS May 3 with TWRP 2.8.6.0 and want to revert back to Final Mahdi 4.4.4. What is the procedure to do this?
Your going to need to flash the KitKat firmware before flashing the ROM. You can flash the last cyanogenmod snapshot CM11 build. It has the firmware built in. Then wipe again and flash mahdi/4.4.4 gapps. You can find those on android file host.

How to install CM13 on XT1033 running CM12 with custom kernel Hurtsky Stable 13?

I want to install MM roms on my phone,stock or CM based. But the problem is that I installed Hurtsky Stable Kernel for 5.1. Do I need to flash a stock kernel of 5.1 to be able to flash 6.0 roms or do I need to flash any kernel for 6.0 roms. And if I do flash a stock kernel for MM rom while running CM12, will my phone boot?
You have only to make a full wipe via twrp recovery (Wipe system, data, cache, art-cache) and install zip of CM13 and gapps.
Download the main system zip from: https://download.cyanogenmod.org/?device=falcon
And the gapps from: http://opengapps.org/ (choose the 6.0 one).
There aren't stock based, because Moto G 1st gen (2013) does NOT HAVE 6.0 official!
There is also an Identiti crisis rom, a porting from moto g 2014, but CM13 is more stable!
All right.Thank you for replying! My concern is about the kernel. The kernel I flashed is meant for LP CM Roms and not MM. So when I flash CM13 with gapps,won't it create a problem? Will I have to flash stock 6.0 kernel or a kernel for MM CM Roms?
No, the kernel is replaced when you install a ROM. The kernel is a part of system, the heart of ROM, contains all the driver (called modules) and also set the CPU and GPU frequences. So you don't have problem if you install the zip because in the zip there is the default 6.0 kernel (if you see in the zip there is a file called boot.img).
Ohh! Thanks a lot! I shall try CM13 now!

Categories

Resources