Just recently bought a Bluetooth Headset for my Motorcycle Helmet, I'm on ICS right now, SCV7. The problem I'm finding is that no matter which voice commands app I use (Vlingo, utter, Skyvi, Voice Search) I can't seem to get it to use the headset's mic to listen to me!
But whenever I take a call the microphone works just fine. When I go into the headset's bluetooth settings it is connected as both phone and media. I've tried both by themselves but didn't get a change. Phone calls work and music plays, but voice commands just don't.
Anyone have similar issues? Any ideas?
Would this be a hardware issue with the headset? Hardware with the phone? Or Software?
On a side note: Noticed that music effects have been really buggy with the headset.. MusicFX and DSPManager go crazy, make it sound worse than without them, like the speaker is about to explode from all the static. (Tried all Loudness levels, switching songs, and tried all equalizer settings but I can't pin it down, sometimes it'll be exploding ear-screeching sounds but when I open DSPManager it's as if it finally clicks and makes the equalizer work again.. goes away next song)
So i have been using my Tone+'s for a while now and love them.
as soon as i upgraded my G-nex to 4.4 i had rediculously loud volume over BT. thought it was just a big in the build.
get my N5 yesterday, and i am having the same issues. i know the headset controls the volume now, but at its lowest setting, it is still pretty loud (louder than i would like)
am i the only one that has this problem? just curious
i have tried wired headphones and they are normal, i also tried a Jabra clipper BT headphone set and it was also normal.
how do 2 LG products not play perfectly together is beyond me.
Having the same issue here. For now, I'm using an equalizer and just lowering all the frequency bands to -13dB. Hopefully this gets fixed soon...
Same issues here. It's very frustrating as I also bought a wireless charging bad so I could be completely wireless at work.
It is Kit Kat issue on all devices that use the default Google Bluedroid Bluetooth stack, meaning Nexus devices and Google Play versions (other devices running a modified stack may not be affected).
Supposedly, it is an extension to Bluetooth AVRCP 1.3 that enables Bluetooth audio devices to directly control Android's system volume. It seems some genius thought two independent volume levels (headphone volume and handset bluetooth level) was too confusing for folks. Clearly they did not think about (or test) that some Bluetooth audio devices with their own volume controls might default to a very high or low level, and control of only the handset's bluetooth level would not provide sufficient range of adjustment.
So once again we have Goofle googing up bluetooth in Android. Please share your disappointment in the following threads so that we might see a fix ASAP. Guessing they are facing law suits for hearing damage if it is not addressed quickly.
http://productforums.google.com/forum/#!msg/nexus/X6Hwt2qMYDo/7qd-JGylQv0J
http://productforums.google.com/forum/#!msg/nexus/dsf7hQPesds/zWhIE27o2KwJ
http://productforums.google.com/forum/#!topic/nexus/uXzs0e3l7rI
http://productforums.google.com/forum/#!msg/nexus/b5h94ggUIac/qkBs9WUIh4oJ
I own the Tone (700) and tone+ and only the Tone+ have this issue. No issue when connected Bluetooth to my car to listen to music too
Jeimygirl said:
I own the Tone (700) and tone+ and only the Tone+ have this issue. No issue when connected Bluetooth to my car to listen to music too
Click to expand...
Click to collapse
Does your older tone and car support a avrcp 1.3?
In my car, it's just the opposite. I now have to turn the level on the phone to max to hear anything. Before 4.4 I could leave it halfway.
I have used tone+ on my s4 and n5. Both are often too loud. I have always had to adjust the headset volume, handset volume and then the equalizer in poweramp to get things just right. I love them for music but if I get a call it is always way too loud.
Sent from my Nexus 5 using XDA Premium 4 mobile app
Solutions Etcetera said:
Does your older tone and car support a avrcp 1.3?
In my car, it's just the opposite. I now have to turn the level on the phone to max to hear anything. Before 4.4 I could leave it halfway.
Click to expand...
Click to collapse
I am unsure what what is to be honest. But if it has to do with showing the songs/artist etc on the screen, then yes it does that. Does it with my S2, N5 and will do it with an iPhone (work). Car is a Honda 2012
The issue with the Tone + is that it powers up at medium volume level, and when connected to an audio source, Android 4.4 now maps the volume control on the Tone to system volume.
As a work around I have found that, after powering up the Tone +, if you press the front most volume rocker repeatedly until you hear the low pitch tone you can lower the volume. Then when you connect to your audio source it is not so loud.
I hope Google fixes this soon, but I have low expectations based on other Bluetooth issues of the past.
Have you tried changing the sound type on the Tone+? (Holding down both volume buttons at the same time) I know if I have it on normal, high base or high treble they all have different volumes. This may help.
I mainly listen to podcasts, so I always set the EQ profile to the 3rd one (treble up).
It looks like 4.4.1 update fixed the battle between headset volume and handset volume. I'm a happy LG owner!
Hello,
i have one big issue that prevents me from fully enjoing marshmellow roms ,the bluetooth audio.
I have a bluetooth headset from lg hbs-730 an they work just fine with every android (this year i changed like 15 handset) and NEVER had any problem,they just works.
BUT they dont work on a oneplus with mm rom and i can't understand why.
the headset connect via bluetooth with no issue and audio comes out fine at first,but when you get heavy bass or just a lot of instruments in the song the audio lose quality and noise ramp up.
do you know why?it is fixable?
the only hint i have its that the audio control on kk,lp roms are different ,so when i push the up and down volume buttons on the phone the bluetooth audio of the phone is managed,but when i press the volume buttons on the headset it manages its OWN volume.
This doesnt happen in MM roms,when you push the volume button of the headset ord the phone its the same volume bar which is managed.
Help Me, XDAi. You're My Only Hope
Stappern said:
Hello,
i have one big issue that prevents me from fully enjoing marshmellow roms ,the bluetooth audio.
I have a bluetooth headset from lg hbs-730 an they work just fine with every android (this year i changed like 15 handset) and NEVER had any problem,they just works.
BUT they dont work on a oneplus with mm rom and i can't understand why.
the headset connect via bluetooth with no issue and audio comes out fine at first,but when you get heavy bass or just a lot of instruments in the song the audio lose quality and noise ramp up.
do you know why?it is fixable?
the only hint i have its that the audio control on kk,lp roms are different ,so when i push the up and down volume buttons on the phone the bluetooth audio of the phone is managed,but when i press the volume buttons on the headset it manages its OWN volume.
This doesnt happen in MM roms,when you push the volume button of the headset ord the phone its the same volume bar which is managed.
Help Me, XDAi. You're My Only Hope
Click to expand...
Click to collapse
I had noise with bluetooth car unit
I mute mic with tasker and i raise bluetooth voice to 80%
noise gone
Audio fx control quality
Try without max volume
geowolf1000 said:
I had noise with bluetooth car unit
I mute mic with tasker and i raise bluetooth voice to 80%
noise gone
Audio fx control quality
Try without max volume
Click to expand...
Click to collapse
would you mind share the tasker profile so i can give it a go?
i never use max volume btw
Create a profile with bluetooth conecrion
Select the device
And search mic mute
Turn. On
Test
Silly question requires a genius solution...
I'm currently using my Pixel as a Home. It is mounted on a 1st gen Bose Sounddock, both as charging stand and speaker. Although it works most of the time, the microphone is not behaving well when I'm playing music using the dock. It seems to be overwhelmed by the music and tuned down its sensitivity, so it won't respond to "Hey Google" any more unless I'm up close. Does anyone have any idea if there's a fix?
Anyone know of a way to disable auto mic level adjustment on Android? I use my phone as a guitar amp and use an iRig to connect the guitar to my phone. However, I notice that when I play with little volume, it sounds okay, but if I start playing loudly it'll just lower the volume like it has some noise gate. I also tried this while recording with my headphones' mic and it has the same effect. What can I do?
PS Sorry if this thread is in the wrong section, I'm new to the site