I was resetting my phone because my keyboard function was invisible. still working but complete invisible with the exception of the exterior out line of the keyboard. When my phone reset it never loaded ever again. I rooted my phone so TWRP came up after a hard reset and said that no OS was currently installed! what do I do??? I have been trying to figure this out for hours!! please help me !
XDA Visitor said:
I was resetting my phone because my keyboard function was invisible. still working but complete invisible with the exception of the exterior out line of the keyboard. When my phone reset it never loaded ever again. I rooted my phone so TWRP came up after a hard reset and said that no OS was currently installed! what do I do??? I have been trying to figure this out for hours!! please help me !
Click to expand...
Click to collapse
Hello, and welcome to XDA! You just need to ADB sideload a rom into your device and flash it. Here is a guide which will work with any device: http://forum.xda-developers.com/showthread.php?t=2559200.
Good luck!
Related
Hi, I have a Kross GY-601 Tablet... One of the cheap chinese tablet you can pickup at factorydirect (Canada)
I seem to have bricked it when attempting to port Clockwork Mod Recovery to it. It does not show anything on screen or do anything, When I connect it to my computer.. It shows up as M6-CHIP in Device Manager as shown in my image.
The internal storage is completly gone as a result of my failed attempt to un-brick it..
It would be a great help if someone helped me fix this..
Thanks in advance..
-Henrique
PS: I'm only 13 sorry if my description of the problem is a bit bad..
Sooo,
You probably don't have proper drivers, use PDANet ones, they work even with obscure tablets.
You tried to port CWM or flash?
It's not bricked since your computer detects it
Last thing, do you have a backup recovery image or another recovery image that works so you can get it back up?
Daniel
I was dumb enough not to do any recovery image backups..
Also.. I ported cwm then flashed it with dd just poped the .img into the recovery block.. but since I didn't compile it properly when I adb reboot recovery.. It got into a boot loop.. so I tried to fix it but broke it even more... So then I tried re-writing the firmware for generic 4.1.2 chinese tablet.. but that messed it up to the point were it only shows as M6-CHIP.. i can only turn on and off.. nothing else.. no boot no screen light up nothing..
I can help you BUT....
loureirom_ said:
Hi, I have a Kross GY-601 Tablet... One of the cheap chinese tablet you can pickup at factorydirect (Canada)
I seem to have bricked it when attempting to port Clockwork Mod Recovery to it. It does not show anything on screen or do anything, When I connect it to my computer.. It shows up as M6-CHIP in Device Manager as shown in my image.
The internal storage is completly gone as a result of my failed attempt to un-brick it..
It would be a great help if someone helped me fix this..
Thanks in advance..
-Henrique
PS: I'm only 13 sorry if my description of the problem is a bit bad..
Click to expand...
Click to collapse
Even i am having the same device on its stock rom and kernel so i guess i can help you i was into rooting and upgrading it but didnt do it as i was waiting for a backup device so if i brick it i dont have to wait to buy a device but i am stupid and dont know how to take a backup of the stock rom. If you will help me know how to do that i can help you in return by uploading the stock rom and sharing the link.:highfive:
Hello all, It's been awhile since I've been on.... A big while But things have changed a lot around and looks great, But on with my question. I have a M horse N9000W MTK6572, And recently tried a sys file restore using titanium backup and the process froze with a error stating that me deviceID had changed, Then the phone proceeded to reboot, But upon booting up it just stays on the android logo. Before this problem I was able to go into factory recovery as I only had the phone rooted but no custom recovery or firmware, And now no recovery using any button combo. I have asked a few on ebay if there jig or jtag would help but they all say not on the china clone as of yet. So is my phone a cool digital android desktop picture, Or is there a method someone knows
My pc nor mac recognize the device anymore either. Thanks in advance for any info or help
Hi,
I have searched and do not find information that is helpful.
With no recovery and no recognition from the computer, I'm afraid this is a hard brick.
Sorry, I know it is not what you wanted to hear. - support for almost any clone device is scarce at best.
Hello elders. I hope that I'm in the right session for my ask. I have tried to update my tecno 7c android 5.0 based tablet (that I've bought, just a month ago) cause it proposed it to me in the settings, software update option. Everything went well till the end of the download. After that, my tablet rebooted correctly and came to the android home screen. But each time I put any SIM card inside, I always have this message: "com.phone stopped working". I've tried to perform a full reset of the phone through the stock recovery but I don't even have access to recovery now. The phone is MTK 6582 processor based tablet. I've tried to read on internet to see if there's a way to fix it but the one I've found explained that I need a same working tablet whose backup file I'll flash on the bricked one through SP FlashTool to revive it but I have nobody having such tablet. Help please if you have solutionq for me. Very urgent. My tablet, the only on I have! Thanks in advance.
Hello! Nobody to answer me?
Hello everyone, i'm new here so..sorry if i post this in a different place, but anyways..
i'm using Infocus M2 4g, i'm really happy with it, but yesterday i decided to install an android 5.0.2 custom ROM, maybe i forgot to wipe cache and make a factory reset before installing it, now my phone works till the welcome page, and the screen touch isn't working, and whenever the screen turns off, the device reboots again and keeps doing it over and over, i don't have a custom recovery, i flashed the ROM by a tool called DinDong and it requires usb debugging so that i can install a different ROM, and get rid of the problem, i can get to the fastboot screen, but i can't flash a room trough that :/
so this means .. NO Custom Recovery, No USB debugging, .. nothing :crying:
i would really appreciate it if you guys could help me, i have so many friends that i want to talk to again on whatsapp, and i don't want to use bluestacks again i need to get back my phone working,
thank you so much for reading this, and please reply as soon as possible)
and sorry for my English
Warlock-idlaasri said:
Hello everyone, i'm new here so..sorry if i post this in a different place, but anyways..
i'm using Infocus M2 4g, i'm really happy with it, but yesterday i decided to install an android 5.0.2 custom ROM, maybe i forgot to wipe cache and make a factory reset before installing it, now my phone works till the welcome page, and the screen touch isn't working, and whenever the screen turns off, the device reboots again and keeps doing it over and over, i don't have a custom recovery, i flashed the ROM by a tool called DinDong and it requires usb debugging so that i can install a different ROM, and get rid of the problem, i can get to the fastboot screen, but i can't flash a room trough that :/
so this means .. NO Custom Recovery, No USB debugging, .. nothing :crying:
i would really appreciate it if you guys could help me, i have so many friends that i want to talk to again on whatsapp, and i don't want to use bluestacks again i need to get back my phone working,
thank you so much for reading this, and please reply as soon as possible)
and sorry for my English
Click to expand...
Click to collapse
Hi and thank you for using XDA Assist
Try to head over here
Good luck!
Pantech Vega R3 IM-a850s
Android 4.4
NOT rooted
I wanted to fix my old phone that I gave to my brother. He said when it overheated then he turn if off when he tried to open it, it does not boot anymore. I tried to do the power + volume down but it didnt work anymore. I tried to connect it on my laptop there's a sound but it doesn't show anything...
it got already got bricked before but after sometime i managed to reset it and recover but after this not anymore....
is there any chance to fix it? How?
Thanks in advance
shupaoshumai said:
Pantech Vega R3 IM-a850s
Android 4.4
NOT rooted
I wanted to fix my old phone that I gave to my brother. He said when it overheated then he turn if off when he tried to open it, it does not boot anymore. I tried to do the power + volume down but it didnt work anymore. I tried to connect it on my laptop there's a sound but it doesn't show anything...
it got already got bricked before but after sometime i managed to reset it and recover but after this not anymore....
is there any chance to fix it? How?
Thanks in advance
Click to expand...
Click to collapse
Greetings and welcome to assist. If your pc recognises the device then there is a chance, you could try this
https://forum.xda-developers.com/android/general/official-update-pantech-im-850-l-t2914736
Good luck
Sawdoctor