Been looking for awhile to root my T-mobile Galaxy Note Edge updated to 5.0.1 lollipop, tried a few none worked, in addition a lot of the links have been removed or taken down. .need help thanks for the help in advance. .
Sent from my SM-G9250 using XDA Forums
did you try the steps in this link?
http://forum.xda-developers.com/note-edge/general/easy-steps-stock-odin-n915tuvu1anjl-sm-t2943993
DudePharaoh said:
did you try the steps in this link?
http://forum.xda-developers.com/note-edge/general/easy-steps-stock-odin-n915tuvu1anjl-sm-t2943993
Click to expand...
Click to collapse
Yes and it fails and then I have to use kies to reinstall factory rom?
Sent from my SM-G9250 using XDA Forums
the more detail you can provide us the better we can help you, maybe someone came across the issue you are crossing.. like what error message do you get
did you clear cache, when does the error happen? etc...
DudePharaoh said:
the more detail you can provide us the better we can help you, maybe someone came across the issue you are crossing.. like what error message do you get
did you clear cache, when does the error happen? etc...
Click to expand...
Click to collapse
Okay I'm at work so I do have all the correct zip files and Odin version, but I used Odin and automobile rar. File started Odin and it failed half way through, when I tried it a second time it seemed to get further but failed also, once I unplugged and reboot, a message said the update failed to use kies to complete the update. The kies reinstalled the rom back to factory and I lost everything. .
On CJ's Rooted Device
As far as I know the CF-Auto-Root/TWRP method still works fine in Lollipop.
Curtis_HTC said:
Okay I'm at work so I do have all the correct zip files and Odin version, but I used Odin and automobile rar. File started Odin and it failed half way through, when I tried it a second time it seemed to get further but failed also, once I unplugged and reboot, a message said the update failed to use kies to complete the update. The kies reinstalled the rom back to factory and I lost everything. .
On CJ's Rooted Device
Click to expand...
Click to collapse
If I remember correctly don't go back inro DL mode after CF Autoroot pull the battery and restart then load TWRP into Odin and install and you should be good.
scoobysnack said:
If I remember correctly don't go back inro DL mode after CF Autoroot pull the battery and restart then load TWRP into Odin and install and you should be good.
Click to expand...
Click to collapse
Pretty much. From what I've seen, this has worked on every note edge with an unlocked bootloader on both kitkat and lollipop.
---------- Post added at 05:39 ---------- Previous post was at 05:38 ----------
At this point, if someone could make a sticky that'd be great so we don't have to answer this question every time
jooniloh said:
Pretty much. From what I've seen, this has worked on every note edge with an unlocked bootloader on both kitkat and lollipop.
---------- Post added at 05:39 ---------- Previous post was at 05:38 ----------
At this point, if someone could make a sticky that'd be great so we don't have to answer this question every time
Click to expand...
Click to collapse
Is there a YouTube video on how to do this it would make it easier?
Sent from my SM-N915T using XDA Forums
Curtis_HTC said:
Is there a YouTube video on how to do this it would make it easier?
Sent from my SM-N915T using XDA Forums
Click to expand...
Click to collapse
I don't know about youtube videos but the process is simple and there're at least a dozen extremely detailed instructions all over the Q&A and General forums
---------- Post added at 10:10 ---------- Previous post was at 10:09 ----------
Basically: Flash autoroot, flash twrp. done.
jooniloh said:
I don't know about youtube videos but the process is simple and there're at least a dozen extremely detailed instructions all over the Q&A and General forums
---------- Post added at 10:10 ---------- Previous post was at 10:09 ----------
Basically: Flash autoroot, flash twrp. done.
Click to expand...
Click to collapse
Yeah I tried three different ways and I have rooted multiple devices for years, maybe I'm missing something simple. .
On CJ's Rooted Device
Try vroot or kingroot you can find kingroot at kingroot.net you can vroot at www.mgyun.com/vroot apk there's an apk version and there's a PC version
I have just tryed rooting using vroot as suggested here with no luck, at least with the apk. SM-N915F note edge unlocked on 5.0.1 , any ideas ?
describe your process exactly
Me: ?
I was downloading the app from url mgyun com
And hit root
But it faild
koopg said:
Me: ?
I was downloading the app from url mgyun com
And hit root
But it faild
Click to expand...
Click to collapse
Lolol this process literally takes two mins and their are guides everywhere
jooniloh said:
Pretty much. From what I've seen, this has worked on every note edge with an unlocked bootloader on both kitkat and lollipop.
---------- Post added at 05:39 ---------- Previous post was at 05:38 ----------
At this point, if someone could make a sticky that'd be great so we don't have to answer this question every time
Click to expand...
Click to collapse
I am furious that this simple process has gotten hard for me. I flashed CF auto root, and it failed (as the thread said it would). I went through the steps to flash TWRP and it fails the same way THAT CF auto-root failed. I tried to use the no-download mode option on step 4 instead (like you guys suggested) and my odin just sat there. It was still on, but everything was grayed out. There was no change to my phone and it was still usable.
I rooted this phone no problem when I bought it. I just factory reset it and flashed to 5.0.1. What am I doing wrong?
Related
OK all...so I am new here and was trying to get JB to work on my tablet. I thought I had done the needed research but went wrong somewhere I guess. I tried to follow steps on a site I found from AndroidAuthority dot com (not sure if I am able to post the entire link or no?). I was trying to root and install ClockworkMod Recovery but I guess either something went wrong or I messed something up. From what I have been reading I guess I have not bricked my device since it still tries to load. It currently loops with the Samsung screen. I can still enter the download mode and recovery mode but not sure what I should try next. I tried via Odin again with no luck. Out of the box I was running 4.0.3 but did the OTA update to 4.0.4. Any help would be appreciated.
Thanks from a newbie!
Also I used espresso_recovery.tar.md5 as the recovery image if that helps at all. Thanks again.
Followed the steps from another site. Will follow these later today:
http://forum.xda-developers.com/showthread.php?t=1788625
I guess since I can still use Odin I should be all set. Sorry if this was in the wrong section.
jRower said:
Followed the steps from another site. Will follow these later today:
http://forum.xda-developers.com/showthread.php?t=1788625
I guess since I can still use Odin I should be all set. Sorry if this was in the wrong section.
Click to expand...
Click to collapse
You can use heimdale too. Ive had better luck using that for my phone, never tried my tabley but it should work.
Sent from my SGH-I997 using xda app-developers app
I haven't tried heimdale yet cause I do not want to add more gas to the flames. But I tried the other link I posted and still no luck. Also tried a different SD card to be on the safe side but no luck. Any ideas on what I should do next? Or any other info I can provide that might help?
Keep on trying... it should work sooner or later. Have the samsung drivers? If not install kies. Try other usb ports too.
Sent either from my p113 (gtab 2 7.0) or i997 (Infuse)
Ryanscool said:
Keep on trying... it should work sooner or later. Have the samsung drivers? If not install kies. Try other usb ports too.
Sent either from my p113 (gtab 2 7.0) or i997 (Infuse)
Click to expand...
Click to collapse
Should I keep on with the same procedure or you mean keep letting it boot in a cycle?
I used this with 4.0.4.
http://forum.xda-developers.com/showthread.php?t=1657056
i would suggest you follow from the beginning.
install samsung drivers and kies and odin. run odin as adminstrator.
pay close attention to the mention of the post #325 in the instruction as it what helps you 4.0.4 root process. its difference from 4.0.3.
also if you are on jb. you need to run cwm 6.0 not 5.0 make sure youre uploading the right file into odin.
---------- Post added at 02:05 PM ---------- Previous post was at 02:05 PM ----------
btw youre not bricked don't stress, youll sort it out soon enough
sonikot said:
I used this with 4.0.4.
http://forum.xda-developers.com/showthread.php?t=1657056
i would suggest you follow from the beginning.
install samsung drivers and kies and odin. run odin as adminstrator.
pay close attention to the mention of the post #325 in the instruction as it what helps you 4.0.4 root process. its difference from 4.0.3.
also if you are on jb. you need to run cwm 6.0 not 5.0 make sure youre uploading the right file into odin.
---------- Post added at 02:05 PM ---------- Previous post was at 02:05 PM ----------
btw youre not bricked don't stress, youll sort it out soon enough
Click to expand...
Click to collapse
Thanks...I'll give it a shot! Much appreciated.
Use section B of my guide.
MultipleMonomials said:
Use section B of my guide.
Click to expand...
Click to collapse
Followed all the steps in section B and I am still stuck in a boot loop. Any idea?
Then use the restore to stock procedure. But before you do, tell me: what step did you boot loop on?
Haven't been able to work on this again. I will try and get some time and get back to you. Thanks again for the help.
jRower said:
OK all...so I am new here and was trying to get JB to work on my tablet. I thought I had done the needed research but went wrong somewhere I guess. I tried to follow steps on a site I found from AndroidAuthority dot com (not sure if I am able to post the entire link or no?). I was trying to root and install ClockworkMod Recovery but I guess either something went wrong or I messed something up. From what I have been reading I guess I have not bricked my device since it still tries to load. It currently loops with the Samsung screen. I can still enter the download mode and recovery mode but not sure what I should try next. I tried via Odin again with no luck. Out of the box I was running 4.0.3 but did the OTA update to 4.0.4. Any help would be appreciated.
Thanks from a newbie!
Click to expand...
Click to collapse
Don't use ClockWorkmod, it's not designed specifically for Gtab2... CWM is bad.
you can try flash your gtab2 with ODIN instead
CWM is OFFICIALLY supported now and works good.
Don't fear.
silentvisitor said:
CWM is OFFICIALLY supported now and works good.
Don't fear.
Click to expand...
Click to collapse
Officially supported by WHO? Samsung ?
CWM is not designed for Gtab2. Just ask clockwork if you don't believe it.
Rotundjere said:
Officially supported by WHO? Samsung ?
CWM is not designed for Gtab2. Just ask clockwork if you don't believe it.
Click to expand...
Click to collapse
See here
Boot Loop
So I'm new here, I tried rooting my p3100, flashed cwm with Odin, as it rebooted from there it just keeps rebooting - need help please guys......any lil bit of advice would help - I've read on other posts to flash to the stock ROM, but how do i do this? where do i get the rom......
OK so I am back at it and still not having much luck. I can't get as far as the:
"CWM-based Recovery v6.0.1.0"
Screen.
From here I do not have a recovery file to use. Which should I use for the P3113....At this point I don't even care if I lose all the data on the tablet and go back to stock. Just need it working again and then do some more research on how to do it right..
Thanks again.
Then use Section E of my guide. It will wipe your data and restore your tablet to stock.
Hi I have read all the thread concerning rooting my note pro. I am one of the unlucky ones who cannot get it to work with cf autoroot. I have read that some one installed twrp with odin and then flashed it with twrp to root it rather than using odin.
However all the threads have lots of links for different builds and versions of both files and I dont want to brick my pad.
Could someone who has used this method on the UK version of the sm-p900 wifi please post a couple of links to the file needed?
Any help appreciated and I have literally tried to flash using odin approx 60 times using every possible trick mentioned on the cw root thread.
Thanks
Nemo
Strangely enough I flashed back to stock firmware from Sammobile yesterday. After I did that, I couldn't root either using CF. Kept hanging in ODIN and soft bricked my note.
I then tried flashing with TWRP via ODIN 3.07 and it worked again. When I went into TWRP to check and exited it asked if I wanted to root, so I did and it was fine. Then I installed SU and Xposed and it's rooted and working fine.
Firmware I used is here: http://www.sammobile.com/firmwares/download/38389/P900XXUANI1_P900BTUANI1_BTU.zip/
TWRP is here: https://goo.im/devs/OpenRecovery/v1awifi/. I think I installed 2.8.0.0 (the TAR one), link here: https://goo.im/devs/OpenRecovery/v1awifi/openrecovery-twrp-2.8.0.0-v1awifi.zip
Hope that helps?
---------- Post added at 02:34 PM ---------- Previous post was at 02:34 PM ----------
andythilo said:
Strangely enough I flashed back to stock firmware from Sammobile yesterday. After I did that, I couldn't root either using CF. Kept hanging in ODIN and soft bricked my note.
I then tried flashing with TWRP via ODIN 3.07 and it worked again. When I went into TWRP to check and exited it asked if I wanted to root, so I did and it was fine. Then I installed SU and Xposed and it's rooted and working fine.
Firmware I used is here: http://www.sammobile.com/firmwares/download/38389/P900XXUANI1_P900BTUANI1_BTU.zip/
TWRP is here: https://goo.im/devs/OpenRecovery/v1awifi/. I think I installed 2.8.0.0 (the TAR one), link here: https://goo.im/devs/OpenRecovery/v1awifi/openrecovery-twrp-2.8.0.0-v1awifi.zip
Hope that helps?
Click to expand...
Click to collapse
I'm uploading both files to my onedrive for future use, so If you need them I can PM you a link.
---------- Post added at 02:48 PM ---------- Previous post was at 02:34 PM ----------
Don't know why CF won't work, but it did originally when I first rooted. Tried various ROMs since and now I've gone back to UK stock firmware it wouldn't work, weird!
Thanks for the links - mucho mucho appreciated!!!
andythilo said:
Don't know why CF won't work, but it did originally when I first rooted. Tried various ROMs since and now I've gone back to UK stock firmware it wouldn't work, weird!
Click to expand...
Click to collapse
I think it was the last update has changed something theres a massive 26 page thread of people having the same problem.
Thanks again
Update - worked perfectly first time.
Thank you very much.
No probs. glad it worked
I'd appreciate any help to get my phone working again. I've only had it for a couple of weeks and I'm hoping I haven't completely ruined it...
I'll try to recall the exact steps I took to get to this point:
First, towelroot wouldn't work to get root due to me accepting the OTA update to 4.4.4 android. So I found on a forum post that you can use Odin to flash the stock kernel and then towelroot will work. So I downloaded the stock kernel and flashed it successfully using Odin. Towelroot was then able to work with success. After that I installed SuperSU and busybox. Then I was using this guide (URL omitted due to forum rules) to install SafeStrap recovery as I'd read CWM recovery didn't work for the G900A model (AT&T). Safestrap seemed to install OK and when I rebooted I was able to get into the SafeStrap software interface. From there, I attempted to flash the CM12 nightly build to the "stock rom" slot (I'd read there was some trouble using the non-stock-rom slots in SafeStrap). That operation completed with success, but when I tried to reboot, it froze at the CM12 splash screen. I tried this with a few more custom ROMS and they all do the same thing (freeze up on boot logo / splash screen).
I've tried using Odin to flash back the stock firmware. As long as I didn't try to flash the bootloader (BL) Odin shows "PASS". However, when it reboots it again hangs on the Samsung splash screen.
So at this point, I've flashed all stock firmware to the phone (except BL) and it freezes and then goes black screen on the Samsung splash screen. Also, it no longer shows the SafeStrap "recovery / continue" bootup screen since I flashed the stock firmware.
Any ideas on how I can get back to a useable device?...
fix
use odin to fix this error will fix your phone
http://odindownload.com/
then follow these directions
Warning! Please find the right Tutorial before you starting the flashing
Do not forget to Backup your phone.
Download the correct and latest Odin versions
Install the Latest Samsung USB Driver
Download and confirm Custom ROM with your device.
Keep in mind that , Most of Samsung phones are different and each one requires various procedures to rooting & flashing with custom ROMs
---------- Post added at 01:01 PM ---------- Previous post was at 01:00 PM ----------
I will get the link for the att s5 original rom
---------- Post added at 01:12 PM ---------- Previous post was at 01:01 PM ----------
http://galaxys5root.com/galaxy-s5-stock-firmware/
Deltax82 said:
use odin to fix this error will fix your phone
http://odindownload.com/
then follow these directions
Warning! Please find the right Tutorial before you starting the flashing
Do not forget to Backup your phone.
Download the correct and latest Odin versions
Install the Latest Samsung USB Driver
Download and confirm Custom ROM with your device.
Keep in mind that , Most of Samsung phones are different and each one requires various procedures to rooting & flashing with custom ROMs
---------- Post added at 01:01 PM ---------- Previous post was at 01:00 PM ----------
I will get the link for the att s5 original rom
---------- Post added at 01:12 PM ---------- Previous post was at 01:01 PM ----------
http://galaxys5root.com/galaxy-s5-stock-firmware/
Click to expand...
Click to collapse
@thebeav , @ up
"odindownload.com" will install a LOT of MALWARE (270MB) but NOT ODIN!!!!!!!!!!
Download ODIN (1MB) HERE
Original stock firmware (safe and tested) can be downloaded HERE
Connect your phone in "DOWNLOAD" mode (Power off and then press "Vol down + home + power" at the same time)
Open "ODIN" and select the downloaded firmware as "AP"
Press start (Progress will take about 10 minutes)
Phone will be fine again
LS.xD said:
"odindownload.com" will install a LOT of MALWARE (270MB) but NOT ODIN!!!!!!!!!!
Download ODIN (1MB) HERE
Original stock firmware (safe and tested) can be downloaded HERE
Click to expand...
Click to collapse
I downloaded from odin.com that and fixed my brothers note 4 and all three of my virus and malware detecters didn't go off
Deltax82 said:
I downloaded from that and fixed my brothers note 4 and all three of my virus and malware detecters didn't go off
Click to expand...
Click to collapse
Go for some working AV.
Avast internet security rings alarm.
And the installer itself looks quite suspicious lol
LS.xD said:
@thebeav , @ up
"odindownload.com" will install a LOT of MALWARE (270MB) but NOT ODIN!!!!!!!!!!
Download ODIN (1MB) HERE
Original stock firmware (safe and tested) can be downloaded HERE
Connect your phone in "DOWNLOAD" mode (Power off and then press "Vol down + home + power" at the same time)
Open "ODIN" and select the downloaded firmware as "AP"
Press start (Progress will take about 10 minutes)
Phone will be fine again
Click to expand...
Click to collapse
link checker said your link was harmful virus maybe attached do not use this link
---------- Post added at 01:28 PM ---------- Previous post was at 01:27 PM ----------
LS.xD said:
Go for some working AV.
Avast internet security rings alarm.
And the installer itself looks quite suspicious lol
Click to expand...
Click to collapse
that's the original odin installer website posted here on XDA by the main people that made this site do your research please
Deltax82 said:
link checker said your link was harmful virus maybe attached do not use this link
---------- Post added at 01:28 PM ---------- Previous post was at 01:27 PM ----------
that's the original odin installer website posted here on XDA by the main people that made this site do your research please
Click to expand...
Click to collapse
PLease get me link to the post you're talking about.
odin
Hi
Well there are many places to get it. I often go here:
http://androidcentral.us/2013/11/download-odin/
Regards
Administration
xda-developers.com
Deltax82 said:
Hi
Well there are many places to get it. I often go here:
http://androidcentral.us/2013/11/download-odin/
Regards
Administration
xda-developers.com
Click to expand...
Click to collapse
Pretty good, but its a completely different website as you posted before. Its not related to "http://odindownload.com" in any kind.
BTW, you're funny, sending me a PM and i can't answer you as you disabled receiving PMs. OMG
LS.xD said:
Pretty good, but its a completely different website as you posted before. Its not related to "http://odindownload.com" in any kind.
BTW, you're funny, sending me a PM and i can't answer you as you disabled receiving PMs. OMG
Click to expand...
Click to collapse
its the same program dude go to both and you will see wow im done with this conversation
Deltax82 said:
its the same program dude go to both and you will see wow im done with this conversation
Click to expand...
Click to collapse
Don't be mad. Its all about learning and you have great potential doing so...
When I tryto flash the PDA file I downloaded from @lsxD 's link with Odin I get the error "SW REV CHECK FAIL : [aboot]Fused 2 > Binary 1"
thebeav said:
When I tryto flash the PDA file I downloaded from @lsxD 's link with Odin I get the error "SW REV CHECK FAIL : [aboot]Fused 2 > Binary 1"
Click to expand...
Click to collapse
Googled the error. Solution is to flash the firmware with PIT file. Only problem is that someone has to give you a working pit file.
MATCHING THREAD
Same problem with other Samsung phone and description for the solution --> CLICK ME
I'm still stuck... I'm just looking to get back to a usable device. I really don't care if it's a stock or custom rom at this point. Any help is appreciated.
I tried flashing with the full firmware package I downloaded (4.4.2 G900A stock firmware) which included a *.pit file inside one of the tarballs. I used the PIT/re-partition option and everything succeeded except it still freezes at the Samsung boot logo.
Anyone? I'm getting desperate here...
thebeav said:
Anyone? I'm getting desperate here...
Click to expand...
Click to collapse
Looking not taht good. I tried my best with no success May be at this point or in some days in case no one here is able to help you, you could think about checking ebay for "bootloader repair" should be about 40$
Here is the quick run down my Note 5 is rooted and was running without any issues ( Custom Rom installed : DARTHSTALKER I disabled ad block because I was having issues opening external links from twitter etc, right after that I just went ahead and restarted my phone and BOOM it would not boot up all I kept getting was this error message
Custom Binary blocked by FRP Lock . I know I can probably just flash the stock image using SmartSwitch maybe? or even Odin
I had TWRP installed and have a backup , but I can't get into recovery at all if I could I'd just do a restore from backup
My main concern now is that how can I do this without losing root and data that is already on my device or is that impossible
Help is appreciated Please
Any help is appreciated folks
also I'm searching for stock firmware and was able to find one from sammmobile but my God it has been downloading for the past 2 hours
https://www.youtube.com/watch?v=RccMvjrwT80 Hope this helps in anyway note 5 what model tmo att verizon sprint
Izz14 said:
Any help is appreciated folks
also I'm searching for stock firmware and was able to find one from sammmobile but my God it has been downloading for the past 2 hours
Click to expand...
Click to collapse
Here's the link https://mega.nz/#!fUAWBSID!W5Y6gBTTawsdXzw6knkI3vDfVTCNC86Gn49iP5SIlZQ
josezr said:
Here's the link https://mega.nz/#!fUAWBSID!W5Y6gBTTawsdXzw6knkI3vDfVTCNC86Gn49iP5SIlZQ
Click to expand...
Click to collapse
file is not there
---------- Post added at 10:53 PM ---------- Previous post was at 10:48 PM ----------
Izz14 said:
Any help is appreciated folks
also I'm searching for stock firmware and was able to find one from sammmobile but my God it has been downloading for the past 2 hours
Click to expand...
Click to collapse
http://www.dsmedia24.com/2016/05/how-to-remove-frp-lock-on-samsung.html
antawnm26 said:
file is not there
---------- Post added at 10:53 PM ---------- Previous post was at 10:48 PM ----------
http://www.dsmedia24.com/2016/05/how-to-remove-frp-lock-on-samsung.html
Click to expand...
Click to collapse
Here is Theron Link again https://mega.nz/#!7MZzALJb!W5Y6gBTTawsdXzw6knkI3vDfVTCNC86Gn49iP5SIlZQ
Thank you guys
Here is what I ended up doing and it worked just flashed stock firmware via Odin. thankfully i did not lose any data besides text messages and had to reinstall my apps. I did lose root so I had to root again
Hi all,
Apologies for such a simple question, but there are a bunch of different threads over the last few months that have slightly differing techniques for rooting and adding TWRP to the J7, but there seem to be a ton of different versions compared to the J3 and I need to make sure I'm following the right directions for a Boost Mobile j700p. I don't want to waste time and risk softbricking this brand new device, so does anyone know or can link me to the most up-to-date reliable method? I just upgraded from a j3 and it seems like the method is very similar if not identical (odin twrp on, flash chainfire supersu, flash xposed) but I just to make sure I am following the right directions and using the right files. This is for a brand new Boost Mobile j700p.
I have attached a screenshot of my phone info, in case firmware version or baseband etc info is relevant.
Thanks in advance for all your help!
slvmecha said:
Hi all,
Apologies for such a simple question, but there are a bunch of different threads over the last few months that have slightly differing techniques for rooting and adding TWRP to the J7, but there seem to be a ton of different versions compared to the J3 and I need to make sure I'm following the right directions for a Boost Mobile j700p. I don't want to waste time and risk softbricking this brand new device, so does anyone know or can link me to the most up-to-date reliable method? I just upgraded from a j3 and it seems like the method is very similar if not identical (odin twrp on, flash chainfire supersu, flash xposed) but I just to make sure I am following the right directions and using the right files. This is for a brand new Boost Mobile j700p.
I have attached a screenshot of my phone info, in case firmware version or baseband etc info is relevant.
Thanks in advance for all your help!
Click to expand...
Click to collapse
bump
This is the way i was able to root my version of the J700P. MY phone is the same as the screen shot provided. The only issue that i had was once i flashed TWRP and did a backup, the phone would constantly boot into TWRP Recovery. So i had to reflash stock rom and root again oh and i unchecked OEM unlock to off, didnt realize i needed to leave it on so i wouldnt get the FRP Lock lol. Still waiting on someone to let me know how i can install TWRP Recovery and it work and not soft brick.
https://forum.xda-developers.com/galaxy-j7/how-to/root-samsung-galaxy-j7-sm-j700p-t3430185
Nas8 said:
This is the way i was able to root my version of the J700P. MY phone is the same as the screen shot provided. The only issue that i had was once i flashed TWRP and did a backup, the phone would constantly boot into TWRP Recovery. So i had to reflash stock rom and root again oh and i unchecked OEM unlock to off, didnt realize i needed to leave it on so i wouldnt get the FRP Lock lol. Still waiting on someone to let me know how i can install TWRP Recovery and it work and not soft brick.
https://forum.xda-developers.com/galaxy-j7/how-to/root-samsung-galaxy-j7-sm-j700p-t3430185
Click to expand...
Click to collapse
i have twrp, the most current version on the sm j700p. All you gotta do is use odin to install it. Just make sure u use the most recent odin and twrp file for j700p. Then when u place it in AP with odin make sure auto reboot option is turned off so it fully installs it. If u have auto reboot on it will not complete the process.
Ok I will give that a try, tyvm. I cant uncheck auto reboot. Here is a screenshot.
Sent from my SM-J700P using Tapatalk
---------- Post added at 08:08 PM ---------- Previous post was at 07:19 PM ----------
Ok so i re-downloaded Odin again and now its working fine. Just need to reboot and i will let you know.
Awesome! That worked. My Hero!!!! lol
---------- Post added at 08:32 PM ---------- Previous post was at 08:08 PM ----------
Ok sooo now i did a backup and now again, it just keeps rebooting back up into twrp. I have no idea whats going on with this. Gonna have to reflash stock rom again and then root again. This is frustrating to say the least.... Keeps saying Recovery is not seandroid enforcing, set warranty bit : recovery...... Thats whats it saying at the top...