Hi everyone!
I figured, why not give MIUI a try. I downloaded the rom, made a full TWRP backup, then installed the ROM. It just froze after the MIUI logo appeared, so I decided to restore.
All the while, I noticed a new red Oneplus logo where the old one had been white. But even after restoring my backup, the startup logo was still red, and my previous rom was freezing during the boot animation. I tried again, no luck.
Then I thought, I'll just load my old rom (Vanir/Exodus) from the downloaded zip OVER my restored rom, maybe that will fix things. It won't let me do that, however, due to an error in TWRP which I've never gotten -- "Error executing updater binary in zip".
So I went to the bootloader to update TWRP, and noticed the whole bootloader looks different and is in Chinese. So it must've been part of the MIUI ROM.
What do I do now? I'd love to just fix the bootloader but not sure how. Maybe if I did that I could then restore my backup. As a precaution, I've ADB Pulled the backup folder just in case I have to start over, then I can copy the backup folder back in and try to restore it........
Thanks for the help!
Well, I figured it out on my own. I went to download the latest version of CM12 from here, and ADB Pushed it while in TWRP. I then installed it, and it didn't give me that assert error. I rebooted, but powered down while it was starting up, went back to TWRP, and restored my backup, no problemo. I wonder what happened.
It would be nice to understand what the issue was that prevented me from restoring it initially, and what I could have done manually to update the particular thing that I needed to update.
Pretty sure it was an the firmware ColorOS uses and is incompatible with the newest roms based on the CM firmware
Related
Ok I have a massive problem here. Last night I decided to use the 1 click universal root app to root my phone and flash it to get CM.
I downloaded the app did the root, downloaded clockworkmod then did a clockworkmod recovery. After that finished i was given a pre-root option to backup my phone and wipe data/storage.
I only chose back up my phone. My nexus one then rebooted and proceeded to backup my phone then it went to install CM 6 RC2.. After this had finished it then rebooted and went to the multicoloured animation where the colours ceom from the left and right..
Here it would continuously loop and never do anythign else. With this I pulled the battery and loaded into recovery where I was in ClockworkMod. I then proceeded to use the recovery and as it was doing the recovery it just froze and the progress bar nor any words would come up.
From here I pulled the battery again did a soft/hard reset but it would hang on the loading animation again. I then did a wipe data/clean option and now it just hangs on the X logo.
On my sdcard I still have the clockworkmod folder with the backup, nandroid, system and all the other files as well. Vodafone Australia have no stock of the Nexus One at all and won't be getting anymore in since it's a finished product
I barely have any cash for a new phone and need to know asap what to do to fix this problem! If anyone can help!
When you installed Cyanogen CM6 did you install the proper baseband also or you just didn't write it down for us? If you had 2.2 on the phone before you rooted the baseband is ok for CM6.
Did you try hooking your phone with USB and try if ADB interface works? If your computer sees the phone via fastboot?
IF fastboot works, you could always restore your stock recovery and install a stock FRF91. (And then try again with CM6, this time installing the proper baseband AND WIPING like you should when installing CM6!!)
When installing custom ROMs always read the install instructions whole first then install.
http://forum.cyanogenmod.com/topic/...y-crap-its-full-of-awesome-v600-rc2-07252010/
I need some help with something. I am trying to restore a backup of one of my ROMs that I created a backup of with CW and I am getting this message after Restoring system "Error while formatting /system!" So now if I reboot it gets stuck at the White screen with the HTC.
Does anyone know what this is all about? Why would I get a formatting system error? If I am stuck how do I get back to original state?
I just tried a test with a different back up and same result.
Finally! Someone with the same issue as me!
It sucks.
Even tried flashing the shipped RUU and rooting/S-OFF from scratch. No dice.
Happens with any version of CWM I use.
ProTekk what are you doing now with the phone? Has anyone else given you an explanation? Have you tried to go original out of the box state?
Just reflashed the custom RUU and re-rooted.
Not ideal, but it keeps S-OFF and gives me a working phone.
Grab the RUU file, rename it to PG05IMG.zip, and place on the root of your sd card. UNPLUG the phone and turn it off. Restart the phone UNPLUGGED while holding the volume down toggle. It will flash the RUU to your phone and return it to stock, unrooted, S-On.
Reroot using the instructions from the team.
Been there, done that, got the t-shirt...
This happened to me today too... i reflashed the last ruu file in the rooting directions, reran the last few lines of code and went from there. Then after having superuser installed, and rom manager installed, i verified root and then rebooted into clockwork and installed my old backup. No big issues. Just sucks i had to go through that again.
This happened to me when i tried getting rid of that new virus rom. Not that it was bad, just didnt like the 'flavor'. So i went into cwr cleared data then tried to install my previous backup. That's where it all went to hell.
/\\/\\orlince
Just wanted to let you know I was successful is just flashing a .zip of any ol rom that you can find on the site, I used Lightning v1.2 to flash CWM and then rebooted into recovery and recovered from one of my backups. Hope this helps!
-Justin
Using ROM Manager and the latest version of CWM I tried installing today's (12-08) nightly build of CM11 to try it out. After doing a complete backup and then wipe data/cache the install failed. I'm not sure why but it said it was aborted and to check log and report the error to ROM Manager.
After that it asked if I wanted to reboot and I wanted to make sure I restored from my backup so I backed out of the screen but then it booted up on its own. It did not get past the S3 loading screen with the CM Android/alien guy it just turned off, back to that screen again and then back into recovery.
At this point I went to recover from my backup file and it said MD5 mismatch and won't load. I've since tried wiping data/cache/dalvik cache all manually and then boot up, or wipe everything and try to install the rom again... every time it just loops back to recovery mode. The last time I tried installing the rom again it told me I might have lost root access and asked if I wanted to repair it... I'm not sure what that means.
Any suggestions? I am lost at this point. I have no experience with ADB (I'm not sure if that's my only option) but I've used ODIN mode a few times. Easiest solution would be best.
bejahu said:
Using ROM Manager and the latest version of CWM I tried installing today's (12-08) nightly build of CM11 to try it out. After doing a complete backup and then wipe data/cache the install failed. I'm not sure why but it said it was aborted and to check log and report the error to ROM Manager.
After that it asked if I wanted to reboot and I wanted to make sure I restored from my backup so I backed out of the screen but then it booted up on its own. It did not get past the S3 loading screen with the CM Android/alien guy it just turned off, back to that screen again and then back into recovery.
At this point I went to recover from my backup file and it said MD5 mismatch and won't load. I've since tried wiping data/cache/dalvik cache all manually and then boot up, or wipe everything and try to install the rom again... every time it just loops back to recovery mode. The last time I tried installing the rom again it told me I might have lost root access and asked if I wanted to repair it... I'm not sure what that means.
Any suggestions? I am lost at this point. I have no experience with ADB (I'm not sure if that's my only option) but I've used ODIN mode a few times. Easiest solution would be best.
Click to expand...
Click to collapse
I had the exact same issue when trying to flash that same CM11 nightly build but with TWRP...
I just pulled the battery took my SD card out and reinserted it and I just kept booting into recovery and turning the phone off until it let me reflash a rom or backup. Obviously this isnt the most legitimate solution but that could work for you! It did for me!...
This could have been caused by needing an update of CWM or TWRP to better support 4.4 perhaps?
Badouken said:
I had the exact same issue when trying to flash that same CM11 nightly build but with TWRP...
I just pulled the battery took my SD card out and reinserted it and I just kept booting into recovery and turning the phone off until it let me reflash a rom or backup. Obviously this isnt the most legitimate solution but that could work for you! It did for me!...
This could have been caused by needing an update of CWM or TWRP to better support 4.4 perhaps?
Click to expand...
Click to collapse
I tried that to no avail. I unfortunately had to revert to stock unrooted via ODIN mode and it got me to boot back up. I can just reroot now. Luckily I made a backup with Titanium and uploaded it to my Google Drive.
Hi all,
A couple of days ago I flashed the OTA image for 8.1. Realising I don't have root and not finding a way to root 8.1 yet, I figured, hey, I'll go back to 8.0. Luckily I did a full backup using TWRP before upgrading.
TWRP 3.1.1 was unable to decrypt the filesystem and therefore restore anything (which I've read is a known issue). Neither could 3.2.1, and 3.2.1 couldn't see the OTG drive I have the backup on, either.
At this point I'd already wrecked the OS by trying to restore without first decrypting the filesystem (figured it'd just overwrite it so who cares). So I flashed the latest 8.0 factory image, started it up to make sure it boots, went back into TWRP and restored the full backup from the OTG drive.
This succeeds - but when rebooting all I get is the initial Google logo. Nothing else. No loop, no progress meter, nothing.
Am I missing a step? Anyone?
jethro1138 said:
Hi all,
A couple of days ago I flashed the OTA image for 8.1. Realising I don't have root and not finding a way to root 8.1 yet, I figured, hey, I'll go back to 8.0. Luckily I did a full backup using TWRP before upgrading.
TWRP 3.1.1 was unable to decrypt the filesystem and therefore restore anything (which I've read is a known issue). Neither could 3.2.1, and 3.2.1 couldn't see the OTG drive I have the backup on, either.
At this point I'd already wrecked the OS by trying to restore without first decrypting the filesystem (figured it'd just overwrite it so who cares). So I flashed the latest 8.0 factory image, started it up to make sure it boots, went back into TWRP and restored the full backup from the OTG drive.
This succeeds - but when rebooting all I get is the initial Google logo. Nothing else. No loop, no progress meter, nothing.
Am I missing a step? Anyone?
Click to expand...
Click to collapse
Had you ever tried restoring the backup before to verify it was stable? Perhaps there was some corruption in the backup file?
Well, it is able to restore the whole thing without an error. I think that counts as verifying that it's not corrupt...
I'm facing the same exact issue. I've got several previous backups of my Pixel, all of 8.1, and if I try restoring any partition except /data they restore successfully and boot as a fresh phone.
Now of course I need my data, but when I try to restore any of my previously backed up /data partitions, they either freeze during restoration or restore successfully. However if they do restore successfully, my phone won't boot anymore. After showing the Google logo, then animated G, it reboots back to recovery.
I tried most things as of now but to no avail. This really sucks!
Well, not fully bricked, but it's completely non-working just the same.
I've had the K1 for a few years now and have been fine with the standard, stock OTA updates. Recently though I've been seeing constant notifications that I'm short on ram and after uninstalling apps, deleting old files, it would work ok for a few days and then start complaining about low memory again. So I figured that something must be corrupt and now is a good a time as any to root and see about flashing a new rom.
I've owned many android devices over the years and have rooted and patched most of them. so I'm familiar with the tools.
This time however, I think I must have crossed something up somewhere.
What I did was this:
Grabbed the minimal ADB package and fastboot drivers.
Booted into the bootloader and ran the fastboot oem unlock. No problem.
From the nVidia site, I then grabbed and flashed the latest stock image and recovery, just to ensure I was on a clean slate. No problem.
Flashed the latest TWRP for the device. No problem.
Flashed SuperSU. No problem.
Booted into the stock system to make sure everything was still working and it was. But, this is the start of where I maybe hosed things up(?).
While running stock, I converted the SD card to internal memory, just so I wasn't having to mess with it later, not thinking that I'd have to do it again anyway after flashing a new rom.
Rebooted back to TWRP and proceeded to flash the new rom (AOSP Extended (AEX) 5.8).
I flashed it by way of the sideload method rather than from a zip file sitting on the SD card. This all seemed to work just fine.
Next I went ahead and flashed OpenGapps Mini. This resulted in an error 70 and after reading about it, it was a simple matter of going into the advanced settings in TWRP and extending the system partition. Did that and OpenGapps then flashed with no problem.
Finally I wrapped it up by flashing tegra124-tn8-p1761-1270-a04-e-battery.dtb and rebooted.
... Nothing. Now I know that when flashing a new rom, the first boot can take some time, but I let it sit for about 2 hours with no result. It didn't appear to be boot looping, but instead just stuck on the nVidia boot screen. Forced it to boot back to the bootloader and brought up TWRP. I obviously did something wrong, so I prepared to reflash the stock image.
Did the wipe, flashed the files and rebooted. Again, nothing.
This time however, not only can I not boot to the system, I now also can't get back into recovery.
No matter how many times I reboot, or attempt to reflash anything, it hangs on the boot screen when attempting to get back into recovery.
So I'm stuck. I've tried reflashing TWRP, stock recovery and stock system, with the SD card in and out, a number of times, all with no joy.
I can access the bootloader, so I can at least run fastboot commands, but that's all I can do. Without being in recovery, I can't access an ADB shell if I need to repair anything.
If you're still with me after this rambling mess, do I have any hope at all in recovering this thing?
Hi,
I think the problem is in the modified .dtb try flash the original file.
Or : https://forum.xda-developers.com/showpost.php?p=82359331&postcount=39
greetings
kozaqu said:
Hi,
I think the problem is in the modified .dtb try flash the original file.
Or : https://forum.xda-developers.com/showpost.php?p=82359331&postcount=39
greetings
Click to expand...
Click to collapse
That got me in the right direction and I can at least get back into recovery now. Thanks! :good:
Also in the same boat
mkhopper said:
Well, not fully bricked, but it's completely non-working just the same.
I've had the K1 for a few years now and have been fine with the standard, stock OTA updates. Recently though I've been seeing constant notifications that I'm short on ram and after uninstalling apps, deleting old files, it would work ok for a few days and then start complaining about low memory again. So I figured that something must be corrupt and now is a good a time as any to root and see about flashing a new rom.
I've owned many android devices over the years and have rooted and patched most of them. so I'm familiar with the tools.
This time however, I think I must have crossed something up somewhere.
What I did was this:
Grabbed the minimal ADB package and fastboot drivers.
Booted into the bootloader and ran the fastboot oem unlock. No problem.
From the nVidia site, I then grabbed and flashed the latest stock image and recovery, just to ensure I was on a clean slate. No problem.
Flashed the latest TWRP for the device. No problem.
Flashed SuperSU. No problem.
Booted into the stock system to make sure everything was still working and it was. But, this is the start of where I maybe hosed things up(?).
While running stock, I converted the SD card to internal memory, just so I wasn't having to mess with it later, not thinking that I'd have to do it again anyway after flashing a new rom.
Rebooted back to TWRP and proceeded to flash the new rom (AOSP Extended (AEX) 5.8).
I flashed it by way of the sideload method rather than from a zip file sitting on the SD card. This all seemed to work just fine.
Next I went ahead and flashed OpenGapps Mini. This resulted in an error 70 and after reading about it, it was a simple matter of going into the advanced settings in TWRP and extending the system partition. Did that and OpenGapps then flashed with no problem.
Finally I wrapped it up by flashing tegra124-tn8-p1761-1270-a04-e-battery.dtb and rebooted.
... Nothing. Now I know that when flashing a new rom, the first boot can take some time, but I let it sit for about 2 hours with no result. It didn't appear to be boot looping, but instead just stuck on the nVidia boot screen. Forced it to boot back to the bootloader and brought up TWRP. I obviously did something wrong, so I prepared to reflash the stock image.
Did the wipe, flashed the files and rebooted. Again, nothing.
This time however, not only can I not boot to the system, I now also can't get back into recovery.
No matter how many times I reboot, or attempt to reflash anything, it hangs on the boot screen when attempting to get back into recovery.
So I'm stuck. I've tried reflashing TWRP, stock recovery and stock system, with the SD card in and out, a number of times, all with no joy.
I can access the bootloader, so I can at least run fastboot commands, but that's all I can do. Without being in recovery, I can't access an ADB shell if I need to repair anything.
If you're still with me after this rambling mess, do I have any hope at all in recovering this thing?
Click to expand...
Click to collapse
I'm also sort of in the same boat i had a custom rom installed and decided to go back to stock os and now i'm stuck at either the Nvidia Logo or the Fastboot menu there's nothing else it let's me do i'd take any advice at this point. I can use Fastboot commands and I've tried Flashing Twrp.img and also flashing all the stock os which goes through with no problems i reboot the device and it's just stuck at the Nvidia logo
Ps: how did you manage to get back into recovery
Hello.
I think i had the same Problem.
I Flashed a Custom Rom, MiniGapps and the tegra...Battery file and since then i had boot loop an the NVidia Logo.
The Problem was: i flashed the tegra-Battery.ZIP file!!!
I noticed that i have to unzip it and flash teh tegra-..battery.DTP file.
since then it booted up again.
the OpenGappMini was buggy. it worked with the Nano!
Hope this helps for you as well!
OMG you guys. I did the exact same damn thing. Flashed the ZIP instead of the DTP file. 100 million thanks to you. I'm going to give it a shot now.
It worked! I wonder how many other folks didn't realize it wasn't a zip to flash to dtb and bricked their devices.