Related
Hi all,
HTC has pushed the eye experience camera app to play store but as with other HTC apps, it is incompatible with our 816.
But that does not mean we cannot have it on our phone.
Follow these simple steps and you can have the eye experience in no time.
1. Root your device (There is a nice thread for it in the General Section or you can watch a video on youtube).
2. Download the HTC Camera apk off the internet and copy it to your SD card (I think uploading of official and closed source apps is not allowed so I am not doing it but you can find it on the internet.)
3. Install Titanium Backup from playstore and grant root privileges to it.
4. Once that is done, uninstall the existing camera app (Make sure you make a backup of it first).
5. Use a file explorer that can access system files (I use ES File Explorer) and place the camera apk (rename the apk to camera.apk)in the system/app folder.
6. Modify the permission of the newly pasted file to Read/Write/Execute and then install the application from there.
It might be possible that your phone might reboot after step 5 but perseverance is the key here my friend. It should work the second time you try it. Just make sure that camera.apk is not there in system/app after titanium backup has finished its job.
Once you are through, you'll get the following new modes:
1. Photo Booth
2. Split Capture
Thankz… @nitinzeon
For ur post helped me… i got htc eye experience..
But good enough i dont went in that way you posted…
Just i download htc camera… the install it as uptade to stock camera it work clear as stock camera.. ??
Now my camera look like these
mbwambo said:
Thankz… @nitinzeon
For ur post helped me… i got htc eye experience..
But good enough i dont went in that way you posted…
Just i download htc camera… the install it as uptade to stock camera it work clear as stock camera.. ??
Click to expand...
Click to collapse
When I tried it that way, my installation was failing.
So had to take the other route.
Ok…. That nice… .but soon will be on google play store… and our phone will be recevieng uptade via play store rather than flashing them…
Well i need to understand something.. ok the 816 and the One mini are very close and i cannot get those features working on my one mini 2 . Someone can explain me this ?
Someone got the same problem ?
Will972 said:
Well i need to understand something.. ok the 816 and the One mini are very close and i cannot get those features working on my one mini 2 . Someone can explain me this ?
Click to expand...
Click to collapse
Your phone is rooted?
Of course rooted and the rom too.
So, in that case, could you please elaborate the exact issue?
Are you able to install the replace the stock apk with the one from play store in /system/app?
If you are, then change the file permission of camera.apk to rwx rwx rwx and install it from the /system folder itself.
One more thing.... use titanium backup to uninstall the original camera so that camera.odex file gets removed too. If it is present in the system folder then the eye experience camera might not work.
In my case i delete stock camera and camera odex from root explorer in system/app folder and then replace new camera set permission and install it .
That's what i've done
Is there any option to have the new camera now without root ?
Will972 said:
In my case i delete stock camera and camera odex from root explorer in system/app folder and then replace new camera set permission and install it .
That's what i've done
Click to expand...
Click to collapse
It should have worked that way.
All right...so..you can try one thing as a last resort.... this should set things straight....
Use titanium backup to convert camera app to user app from system app. Then uninstall camera app like any other app.
Then install the latest camera.apk and you should have it in your app drawer.
One more thing.... I think it is compatible only with a sense rom. There is no harm in trying on another rom though.
bonczas said:
Is there any option to have the new camera now without root ?
Click to expand...
Click to collapse
You can try installing it like a regular app.
If it works then please leave a comment in this thread. It may help fellow XDAians.
how could we do that wile our phone is s-on? after reboot any changes in system or app need root come back to normal before reboot
This doent look S-on!!… for some variant need root for titanium backup apk while others like mine no need of root just install as normal apk then it update the stock camera… then remain as stock camera…..
i cant install basybox always system error same in xposed framwork i dont have full root
---------- Post added at 02:37 PM ---------- Previous post was at 02:33 PM ----------
i tried to edit the sound file to gain speaker volume but after reboot nothing happens it back to normal values
rowihel2012 said:
i cant install basybox always system error same in xposed framwork i dont have full root
---------- Post added at 02:37 PM ---------- Previous post was at 02:33 PM ----------
i tried to edit the sound file to gain speaker volume but after reboot nothing happens it back to normal values
Click to expand...
Click to collapse
Try using this for permanent root:
http://forum.xda-developers.com/des...l-windroid-universal-android-toolkit-t2944399
I haven't used it but it looks promising to me.
All the best!!!!!
I tried installing it normally but it says that it can't be done because there is already same application but with another signature ? Htc d816n single sim from Poland
bonczas said:
I tried installing it normally but it says that it can't be done because there is already same application but with another signature ? Htc d816n single sim from Poland
Click to expand...
Click to collapse
In that case @bonczas.... you'll have to wait for official update from HTC.
Since I've been receiving a lot of private messages on how to install the Microsoft Word, Excel and PowerPoint for Tablet apps on non-supported devices, I decided to create this thread that guides you through every single step.
This how-to is meant for people who can't download these apps via the Google Play Store due to device/county restrictions. It's only showing you how to sideload these apps and get them to run on other screen-sized smartphones. The other minimum requirements might still be essential for these apps to run properly.
Official Minimum Requirements:
These apps work best on Android devices having 1GB+ RAM and running KitKat (4.4.x) or later versions.
Click to expand...
Click to collapse
If you run into problems that aren't directly connected to your device but concerning the apps themselves, please post those into the Microsoft Office for Android Community.
You might want to try to install the apps via the Google Play Store first:
Microsoft Word
Microsoft Excel
Microsoft PowerPoint
To become a beta tester, please follow the steps on the About page of this Microsoft Office for Android Beta Community.
If you aren't able to Install the apps via the Google Play Store, follow this guide:
Download the apk and OBB files.
Install the apks
Push the *.obb files to data/media/obb or to sdcard/Android/obb into corresponding folders named:
Code:
[I]com.microsoft.office.excel[/I]
[I]com.microsoft.office.powerpoint[/I]
[I]com.microsoft.office.word[/I]
Trouble with your obb files?
chuvk said:
make sure you pushed the files (don't extract!) into the correct directories
Click to expand...
Click to collapse
Advait2710 said:
make sure the permissions for the folders are set to: rwxrwxr-x
Click to expand...
Click to collapse
test the other directory given (one of them should work)
Advait2710 said:
make sure the permissions for the folders are set to: rwxrwxr-x
Click to expand...
Click to collapse
In case you'd like to fake another device's screen size (e.g. Nexus 7)
No root guide
Root guides:
To change the DPI for certain apps only, follow those steps:
Install Xposed Framework
No ART:
Download and install this Xposed Framework installer
Open the Xposed Framework app
Go to the Framework tab
Install/Update
Reboot
Lollipop ARMv7+ Installation Guide
Xposed for Android 5.1
Download and install the App Settings module
Enable the App Settings module via the Xposed Installer App (Modules) and reboot
Launch the App Settings module User Interface
Pick the app
Enable the settings for that particular app
Insert 213 in the DPI field (Nexus 7's DPI)
Click on save
Repeat step 5 to 8 for all other apps
To change the DPI for your entire device, follow these steps:
Go to /system
make a backup of build.prop
open build.prop with any root file editor and enable editing (ES Note Editor)
look for the line that contains this expression:
Code:
ro.sf.lcd_density
change the number value to 213 so the line looks like this:
Code:
ro.sf.lcd_density=213
(Nexus 7's DPI)
save the build.prop file
reboot
or
Install some Terminal emulator
execute the following commands:
Code:
su [I]# superuser access[/I]
wm density 213 [I]# Nexus 7's DPI[/I]
[I]# to revert this change, use this command instead:[/I] wm density reset
exit [I]# to exit root access[/I]
exit [I]# to exit terminal[/I]
In case your device is larger than 10.1" and you don't have a paid subscription but root access:
Install Xposed Framework
No ART:
Download and install this Xposed Framework installer
Open the Xposed Framework app
Go to the Framework tab
Install/Update
Reboot
Lollipop ARMv7+ Installation Guide
Xposed for Android 5.1
Install TabletMetrics module
reboot
Downloads:
armeabi-v7a:
All Versions here on MEGA
Latest Version on Zippyshare.com
Version 16.0.4201.1006
Microsoft Excel for Android: APK (OBB)
Microsoft PowerPoint for Android: APK (OBB)
Microsoft Word for Android: APK (OBB)
x86:
Microsoft Excel for Android: APK (OBB might be the same as for armeabi-v7a)
Microsoft PowerPoint for Android: APK (OBB might be the same as for armeabi-v7a)
Microsoft Word for Android: APK (OBB might be the same as for armeabi-v7a)
Jack Phoenix said:
How to check the target architecture(s) of an app without installing it:
Assuming you have the .apk on your computer (as opposed to your phone or tablet):
Open up the .apk file in 7-Zip or a similar program
Check what directory is present in the lib/ folder
Click to expand...
Click to collapse
Don't forget to hit the :good: thanks button!
False. Changed the DPI of the systemui and it works.
If there's a way to change the DPI of certain apps on L, that would be of great help.
Sent from my One using XDA Free mobile app
weird can get the excel to install but not the other two??? any idea
the playa! said:
False. Changed the DPI of the systemui and it works.
Click to expand...
Click to collapse
So you're saying it does indeed work on Android L? What device are you using? What OS?
Sent from my A0001 using XDA Premium 4 mobile app
Suzook1 said:
weird can get the excel to install but not the other two??? any idea
Click to expand...
Click to collapse
I can't help if you don't tell me exactly what's not working.
Sent from my A0001 using XDA Premium 4 mobile app
sorry my bad. I follow the instructions but the pp and word still ask me to download additional files and wont launch
Suzook1 said:
sorry my bad. I follow the instructions but the pp and word still ask me to download additional files and wont launch
Click to expand...
Click to collapse
Is the MD5 checksum correct?
You only changed the PowerPoint folder name, right?
Are the files in the right location? Each file needs to be in exactly one folder in data/media/obb
(See the screenshot I attached)
Did the files actually get copied there? Did you grant the file explorer superuser access to copy all files?
your the best, that did the trick. I was copying it over the wrong way. THANK YOU
JBH168 said:
So you're saying it does indeed work on Android L? What device are you using? What OS?
Sent from my A0001 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Yup. Using HTC One M7 on CM12.
Sent from my One using XDA Free mobile app
OBB files?
Am I missing something? I cannot find the zipped files to download.
dave812 said:
Am I missing something? I cannot find the zipped files to download.
Click to expand...
Click to collapse
Goto 1 then click
then click on the (OBB) links then you'll get the zip file
Thanks! Do you know i tried that three times before I asked? I kept getting the apk link. Fat fingers on a small screen i guess.
I m on 4.2.2 and this doesn't install error problem parsing package any solution
Thanks man, real helpful :good:
One thing that I noticed is that when I try signing it, it fails and says to check the proxy, internet connection, etc.
moinakbera said:
I m on 4.2.2 and this doesn't install error problem parsing package any solution
Click to expand...
Click to collapse
That usually means that the downloaded package is corrupted or not fully downloaded. If you download it again, it should work.
the playa! said:
One thing that I noticed is that when I try signing it, it fails and says to check the proxy, internet connection, etc.
Click to expand...
Click to collapse
Signing a document? Problems considering the app itself should be reported in the beta community on Google Plus. I can't think of any reason why this would be device specific.
JBH168 said:
That usually means that the downloaded package is corrupted or not fully downloaded. If you download it again, it should work.
Signing a document? Problems considering the app itself should be reported in the beta community on Google Plus. I can't think of any reason why this would be device specific.
Click to expand...
Click to collapse
No signing in to edit the documents.
the playa! said:
No signing in to edit the documents.
Click to expand...
Click to collapse
Can you sign in to any other microsoft apps?
Did you try both, WiFi and mobile network already?
Did you play around with any settings concerning your web connection? (Proxy, etc)
What country are you located in? I honestly don't think they restrict the access via your IP rather than the play store, but who knows. Maybe using a tunnel to sign in?
JBH168 said:
Can you sign in to any other microsoft apps?
Did you try both, WiFi and mobile network already?
Did you play around with any settings concerning your web connection? (Proxy, etc)
What country are you located in? I honestly don't think they restrict the access via your IP rather than the play store, but who knows. Maybe using a tunnel to sign in?
Click to expand...
Click to collapse
Yes I can sign into other MS apps, and I'm in the US, and no, nothing is blocked on my Router.
the playa! said:
Yes I can sign into other MS apps, and I'm in the US, and no, nothing is blocked on my Router.
Click to expand...
Click to collapse
Try it on a different network. If that doesn't help, post it into the Google plus community. Maybe they already know that issue...
UPDATE 29/03: Added version for Lollipop 5.1 (tested on CM12.1/AOSP ROMs).
UPDATE: Fixed zip file.
I have compiled a modified Lollipop ContactsProvider to allow the Facebook app to sync contacts on CM12/AOSP based ROMs.
To install:
Download the attached recovery flashable zip and copy it to your phone.
Clear data for the Facebook app and Contacts Storage (Apps > All). VERY IMPORTANT.
Reboot into recovery and flash the zip file.
When you log back into the Facebook app you may see the option to enable contact sync, if not it will appear at the bottom of the App Settings screen.
If you find your contacts are not appearing after enabling in the FB app, do the following:
Open a command prompt
adb shell
su
sqlite3 /data/data/com.android.providers.contacts/databases/contacts2.db 'ALTER TABLE raw_contacts ADD COLUMN is_restricted VARCHAR';
try the previous step a second time and if it was successful you will be told it already exists.
Reboot
This has been tested and works perfectly on a Galaxy S5 and HTC One M7 with both CM12 and AOSP based ROMs, but I would advise as always making a backup of things before flashing. I take no responsibility for any brickage that may occur.
Thanks, it's working (from the App Settings screen)!
bradstewart said:
UPDATE: Fixed zip file.
I have compiled a modified Lollipop ContactsProvider to allow the Facebook app to sync contacts on CM12/AOSP based ROMs.
To install:
Download the attached recovery flashable zip and copy it to your phone.
Clear data for the Facebook app and Contacts Storage (Apps > All). VERY IMPORTANT.
Reboot into recovery and flash the zip file.
When you log back into the Facebook app you may see the option to enable contact sync, if not it will appear at the bottom of the App Settings screen.
This has been tested and works perfectly on a Galaxy S5 and HTC One M7 with both CM12 and AOSP based ROMs, but I would advise as always making a backup of things before flashing. I take no responsibility for any brickage that may occur.
Click to expand...
Click to collapse
@bradstewart would you be able to type up a tutorial on what you edited to get facebook sync working I'm waiting to get this working on 5.1.
sapplegater said:
@bradstewart would you be able to type up a tutorial on what you edited to get facebook sync working I'm waiting to get this working on 5.1.
Click to expand...
Click to collapse
Version for 5.1 has been added.
killed my system. crash loop of android acore. am on cos12 on oneplus one.
KingNothingUA said:
killed my system. crash loop of android acore. am on cos12 on oneplus one.
Click to expand...
Click to collapse
It works on the oneplus you have to clear the fb app and contacts storage again while its crashing and once you wipe them it will stop I'm using it now on the cm12.1 nightly..
bradstewart said:
UPDATE 29/03: Added version for Lollipop 5.1 (tested on CM12.1/AOSP ROMs).
UPDATE: Fixed zip file.
I have compiled a modified Lollipop ContactsProvider to allow the Facebook app to sync contacts on CM12/AOSP based ROMs.
To install:
Download the attached recovery flashable zip and copy it to your phone.
Clear data for the Facebook app and Contacts Storage (Apps > All). VERY IMPORTANT.
Reboot into recovery and flash the zip file.
When you log back into the Facebook app you may see the option to enable contact sync, if not it will appear at the bottom of the App Settings screen.
If you find your contacts are not appearing after enabling in the FB app, do the following:
Open a command prompt
adb shell
su
sqlite3 /data/data/com.android.providers.contacts/databases/contacts2.db 'ALTER TABLE raw_contacts ADD COLUMN is_restricted VARCHAR';
try the previous step a second time and if it was successful you will be told it already exists.
Reboot
This has been tested and works perfectly on a Galaxy S5 and HTC One M7 with both CM12 and AOSP based ROMs, but I would advise as always making a backup of things before flashing. I take no responsibility for any brickage that may occur.
Click to expand...
Click to collapse
Can you make a 5.1.1 version?
Ragarianok said:
Can you make a 5.1.1 version?
Click to expand...
Click to collapse
I'm not running 5.1.1 myself yet so if somebody wants to supply a ContactsProvider.apk from a deodexed 5.1.1 ROM I should be able to mod it.
bradstewart said:
I'm not running 5.1.1 myself yet so if somebody wants to supply a ContactsProvider.apk from a deodexed 5.1.1 ROM I should be able to mod it.
Click to expand...
Click to collapse
Not really sure what you mean by deodexed. :/ But here's the the contactsprovider.apk from CM12.1 (5.1.1).
Anything for 5.1.1 yet?
bradstewart said:
I'm not running 5.1.1 myself yet so if somebody wants to supply a ContactsProvider.apk from a deodexed 5.1.1 ROM I should be able to mod it.
Click to expand...
Click to collapse
Can you just tell us how to mod the apk?
wee woo wee woo
Ragarianok said:
Can you just tell us how to mod the apk?
Click to expand...
Click to collapse
Ragarianok you find anything out lol?
n00b Samurai said:
Ragarianok you find anything out lol?
Click to expand...
Click to collapse
I cracked it!
I managed to mod the contactsprovider.apk from cm12 (5.1.1). You'll have to copy it over to system/Contacts Provider and change permissions to 644. Then reboot.
You might also have to do that extra thing in the first post in this thread (making a new column), but you can do that in Terminal Emulator from the Play Store.
Ragarianok said:
I cracked it!
I managed to mod the contactsprovider.apk from cm12 (5.1.1). You'll have to copy it over to system/Contacts Provider and change permissions to 644. Then reboot.
You might also have to do that extra thing in the first post in this thread (making a new column), but you can do that in Terminal Emulator from the Play Store.
Click to expand...
Click to collapse
If you don't mind me asking what you did mines working but its not doing quite right I have to keep re-adding the tables and it syncs all contacts instead of existing like I pick xD
n00b Samurai said:
If you don't mind me asking what you did mines working but its not doing quite right I have to keep re-adding the tables and it syncs all contacts instead of existing like I pick xD
Click to expand...
Click to collapse
What I did was:
-Uncheck Google Contacts sync
-Remove Facebook account
-Clear Data for Contacts Storage
-Copy ContactsProvider.apk to system/priv-app/ContactsProvider
-Reboot
-Add table with Terminal Emulator (after clearing data again, if necessary due to errors on boot)
-Re-check Google Contacts sync
-Login to Facebook
-Go to app settings
-Scroll down to Sync Contacts
-Choose either Sync All or Existing
I usually just sync all.
Ragarianok said:
What I did was:
-Uncheck Google Contacts sync
-Remove Facebook account
-Clear Data for Contacts Storage
-Copy ContactsProvider.apk to system/priv-app/ContactsProvider
-Reboot
-Add table with Terminal Emulator (after clearing data again, if necessary due to errors on boot)
-Re-check Google Contacts sync
-Login to Facebook
-Go to app settings
-Scroll down to Sync Contacts
-Choose either Sync All or Existing
I usually just sync all.
Click to expand...
Click to collapse
yep i did that XD its just not wanting to sync existing only lol
---------- Post added at 11:28 AM ---------- Previous post was at 11:06 AM ----------
trying to figure out what bradstewart did to make his work just right I remembered this link http://niranjanthilak.com/facebook-sync-for-android-ics-devices/ for ICS but it seems to be the same basic concept to make it work here....
n00b Samurai said:
yep i did that XD its just not wanting to sync existing only lol
---------- Post added at 11:28 AM ---------- Previous post was at 11:06 AM ----------
trying to figure out what bradstewart did to make his work just right I remembered this link http://niranjanthilak.com/facebook-sync-for-android-ics-devices/ for ICS but it seems to be the same basic concept to make it work here....
Click to expand...
Click to collapse
I'm really not sure what he did, but it's working for me... even it's a little tedious. I think I did pretty good for a beginner.
You did awesome man and I appreciate it I was just curious as to what exactly he did lol
Pics are blurry!
The sync works, thanks a lot about it. But is there any way to make the sync download high res pics from facebook to contacts ? All the synced pics are blurry :/
Hello everyone
I have a yotaphone 3.
How to install/fix play store ???
I've tried to root it with framaroot and kingroot , it's seems not working.
https://www.youtube.com/watch?v=3vVVvK37IYw
My phone crash when I want to install apk's directly . Play store / Google chrome crash when I open apps !!
Best regards.
VolUp+power,in recovery.show a robot,power+2VolUp,show recovery menus
To have root
1. boot on fastboot : vol- + power button for 20secondes
2. Connect to a computer and write " fastboot oem unlock"
3. download twrp recovery
4. type fastboot boot recovery-twrp.img
5. flash supersu.zip by the twrp recovery.
The problem is , can someone port a twrp recovery to the yotaphone Y3.
Best regards
dlnraja said:
To have root
1. boot on fastboot : vol- + power button for 20secondes
2. Connect to a computer and write " fastboot oem unlock"
3. download twrp recovery
4. type fastboot boot recovery-twrp.img
5. flash supersu.zip by the twrp recovery.
The problem is , can someone port a twrp recovery to the yotaphone Y3.
Best regards
Click to expand...
Click to collapse
No root ,No su
look this https://pan.baidu.com/s/1qXFEXbQ. this's Coolpad S1 JUI Android7.1.1 ROM. this rom have YOTA3 System partition list.
dlnraja said:
Hello everyone
I have a yotaphone 3.
How to install/fix play store ???
I've tried to root it with framaroot and kingroot , it's seems not working.
https://www.youtube.com/watch?v=3vVVvK37IYw
My phone crash when I want to install apk's directly . Play store / Google chrome crash when I open apps !!
Best regards.
Click to expand...
Click to collapse
I use Packet Capture 20180623 update page
Yota3 update pag link http://hwfotadown.mayitek.com/ota/r...1000MPX1806223/2018062717355410168.zip?m=(you yota3 meid)
gor516don said:
Yota3 update pag link http://hwfotadown.mayitek.com/ota/r...1000MPX1806223/2018062717355410168.zip?m=(you yota3 meid)
Click to expand...
Click to collapse
Didn't make any difference since play store stopped. Any other solution?
skromnia said:
Didn't make any difference since play store stopped. Any other solution?
Click to expand...
Click to collapse
you need Kill "phone master" APP.i am use "IceBox" APP kill this.
---------- Post added at 01:11 PM ---------- Previous post was at 12:54 PM ----------
Yota3 OS 201712021 TO 201801121 update pag link http://hwfotadown.mayitek.com/ota/r...N06A1000MPX18011211515772261119/update.zip?m=
---------- Post added at 01:13 PM ---------- Previous post was at 01:11 PM ----------
Yota3 OS 201801121 TO 201802115 update pag link http://fotadown.mayitek.com/ota/roo...N06A1000MPX18021151518402241612/update.zip?m=
No Phone Mater app. Do you mean com.journeyui.phonemanager ?
gor516don said:
you need Kill "phone master" APP.i am use "IceBox" APP kill this.
---------- Post added at 01:11 PM ---------- Previous post was at 12:54 PM ----------
Yota3 OS 201712021 TO 201801121 update pag link http://hwfotadown.mayitek.com/ota/r...N06A1000MPX18011211515772261119/update.zip?m=
---------- Post added at 01:13 PM ---------- Previous post was at 01:11 PM ----------
Yota3 OS 201801121 TO 201802115 update pag link http://fotadown.mayitek.com/ota/roo...N06A1000MPX18021151518402241612/update.zip?m=
Click to expand...
Click to collapse
skromnia said:
No Phone Mater app. Do you mean com.journeyui.phonemanager ?
Click to expand...
Click to collapse
YES
com.zhangyue.coolyota.major
com.zhangyue.coolyota.minor
These two programs will cause other programs to flicker back.
useing ICEBOX Freeze them in the refrigerator
Ok, so I flashed the update you send a link. After that uninstalled:
com.journeyui.phonemanager
com.zhangyue.coolyota.major
com.zhangyue.coolyota.minor
But the phone still cannot install any apps or access the Play Store anymore (the first 2 days it was all working fine).
Can you write a tutorial of how to setup a fresh device after factory reset with working Play Store and somehow preventing it from stopping and getting Google account errors and sync problems?
gor516don said:
com.zhangyue.coolyota.major
com.zhangyue.coolyota.minor
These two programs will cause other programs to flicker back.
useing ICEBOX Freeze them in the refrigerator
Click to expand...
Click to collapse
skromnia said:
Ok, so I flashed the update you send a link. After that uninstalled:
com.journeyui.phonemanager
com.zhangyue.coolyota.major
com.zhangyue.coolyota.minor
But the phone still cannot install any apps or access the Play Store anymore (the first 2 days it was all working fine).
Can you write a tutorial of how to setup a fresh device after factory reset with working Play Store and somehow preventing it from stopping and getting Google account errors and sync problems?
Click to expand...
Click to collapse
I'm sorry! My English is very poor. But I will try to use the translation tool to write a tutorial about YOTA3.
gor516don said:
com.zhangyue.coolyota.major
com.zhangyue.coolyota.minor
These two programs will cause other programs to flicker back.
useing ICEBOX Freeze them in the refrigerator
Click to expand...
Click to collapse
gor516don said:
I'm sorry! My English is very poor. But I will try to use the translation tool to write a tutorial about YOTA3.
Click to expand...
Click to collapse
I can help you out with the translation. I think we'll help a lot of people who are scared to buy this otherwise great phone.
Google Play store stopped issue fix
skromnia said:
Didn't make any difference since play store stopped. Any other solution?
Click to expand...
Click to collapse
After you successfully install play store in your phone, you could see '咪咕阅读' popped up in your update list. DON'T UPDATE THIS APP EVER.
I suppose this app should be implemented in system level with wrong configuration. Even you didn't install it before, it would be in your installation list.
Stop auto-update first and never install this app. I figure this out after 6 times factory resetting.
POPO_O said:
After you successfully install play store in your phone, you could see '咪咕阅读' popped up in your update list. DON'T UPDATE THIS APP EVER.
I suppose this app should be implemented in system level with wrong configuration. Even you didn't install it before, it would be in your installation list.
Stop auto-update first and never install this app. I figure this out after 6 times factory resetting.
Click to expand...
Click to collapse
It looks like ill have to factory reset again and uninstall that app, but then which app is responsible for making the phone not being able to install any app?
咪咕阅读 it's this app. Even though you delete it, it will pop up in your update list in Google play store again. So disable auto update first and don't update this app ever.
POPO_O said:
咪咕阅读 it's this app. Even though you delete it, it will pop up in your update list in Google play store again. So disable auto update first and don't update this app ever.
Click to expand...
Click to collapse
Thanks, I'll give it a try.
skromnia said:
Thanks, I'll give it a try.
Click to expand...
Click to collapse
Let me if it worked for you. I suppose they bundled this app with system files which course this problem
Hello, I am here to share the pie apps from the latest beta builds, as a recent thread similar to this has been closed due to OP descretion, I have had numerous messages to open another one so here it is peeps.:laugh:
I AM NOT RESPONSIBLE FOR THIS OR BRICKED DEVICES, DEAD SDCARDS OR ANY OTHER ISSUE CAUSED TO YOUR DEVICE BY THESE APPS YOU ARE FLASHING AT YOUR OWN RISK. YOU HAVE BEEN WARNED.
Installation methods (Both require a permissive kernel)
Method 1: Installing as a normal apk
This method is the simplest of the two, in this method all you simply need to do is install the apk file, however the catch is that your signature verification needs fully disabling for all apks and you need a permissive kernel on top of that for some apps (Eg. Edge Screen).
Method 2: Root install(Pushing into system
This is the slightly harder method of the two but still easy to do.
Requirements:
Root
Any root browser
Open root browswer and make sure system is set to R/W, then copy and paste the apks into their respective folders (Eg. Messages apk goes into SamsungMessages_10.0 folder)
Settings Permissions
Folder Permissions: 755 (rwx r-x r-x)
Apk permissions: 644 (rw- r-- r--)
After all that is completed simply reboot.
Aroma v0.3
In my second post after this main one I will add a link to V3 aroma link.
ASBD Apps: https://mega.nz/#!WyZW2YZB!wyrfh88OvsPjsVSRtFVAhqLfRXNgmq1eIi4BliSaL8Y
Paypal Donation URL: https://www.paypal.me/Lethftw
TO REPORT A BUG:
WHAT APP IS FORCE CRASHING
STEPS TO PRODUCE THE CRASH
YOUR DEVICE DETAILS (MODEL,SDK ETC)
LOGS OF CRASH
DO NOT ASK FOR ETAs
CREDITS:
@corsicanu for aroma files and techniques on app porting
the testers, donors and people dumping the apks on Apkmirror too.
Please PM me if I missed you out and I will gladly add you. :laugh:
Deleted
Deleted
I had a problem with browser in the latest zip it would open and just be a blank screen. It works installing it manually though
leenoone1988 said:
I had a problem with browser in the latest zip it would open and just be a blank screen. It works installing it manually though
Click to expand...
Click to collapse
Would it not open with MEGA App?
LeeXDA18 said:
Would it not open with MEGA App?
Click to expand...
Click to collapse
Sorry i ment the internet browser app
It would just stay on a white screen after i flashed it the other apps work fine
leenoone1988 said:
Sorry i ment the internet browser app
It would just stay on a white screen after i flashed it the other apps work fine
Click to expand...
Click to collapse
Try force stopping and clearing app data from settings see if that fixes your issue.
Newest WallpaperChooser for Oreo
Should work without any fc
Forgetten said:
Newest WallpaperChooser for Oreo
Should work without any fc
Click to expand...
Click to collapse
Your a star, may I use this in next aroma update?
LeeXDA18 said:
Your a star, may I use this in next aroma update?
Click to expand...
Click to collapse
Ofc. I will share here newest apps as I port them on my device
Nevertheless, which leak do you use? Mine still ZRKA
Forgetten said:
Newest WallpaperChooser for Oreo
Should work without any fc
Click to expand...
Click to collapse
404 not found
leenoone1988 said:
404 not found
Click to expand...
Click to collapse
Downloading is alive ?
Forgetten said:
Ofc. I will share here newest apps as I port them on my device
Nevertheless, which leak do you use? Mine still ZRKA
Click to expand...
Click to collapse
I've just received a Note 9 leak and yes still using ZRKA leak, can I get your Telegram username so I can private message you easier? :laugh:
LeeXDA18 said:
I've just received a Note 9 leak and yes still using ZRKA leak, can I get your Telegram username so I can private message you easier? :laugh:
Click to expand...
Click to collapse
@lymkal
We will have a new update shortly :laugh: that's when I eventually get latest dump, if anyone has latest please do send and apps will get updated quicker
Which folder exactly should i put theese 2 files ? System/priv-app/ ?/ ?
Loffeboy said:
Which folder exactly should i put theese 2 files ? System/priv-app/ ?/ ?
Click to expand...
Click to collapse
SamsungDialer
TelephonyUI
Loffeboy said:
Which folder exactly should i put theese 2 files ? System/priv-app/ ?/ ?
Click to expand...
Click to collapse
Don't add TelephonyUI you need to put pie code in your framework.jar
LeeXDA18 said:
Don't add TelephonyUI you need to put pie code in your framework.jar
Click to expand...
Click to collapse
is that the reason call logs wont work?
leenoone1988 said:
is that the reason call logs wont work?
Click to expand...
Click to collapse
Well I have pie code in framework.jar now im gonna try it and see what happens