Related
maybe.... I did a search and could not find what i was looking for...or found too much.
This is what happened, it rained, my windows were up. When i got in the car it dropped in the middle console were it was a little water. It was there for a second before I grabbed it and put it in my purse.
When I got home i dried it..removing the sim card and battery. the white thing is still white. It will keep popping up with stuff.
I read if you can get the battery to heat up that will help. is that true?
I work for att so i know i am screwed if there is water damage. i can't buy another one cause i purchase at none committment and the last one cost me 410.
I done retrofited my phone so i will be praying all night that it works.
HELP GIVE ME FACTS
if the white thing is still white and if you have warranty go for a replacement coz i think they only check the white thing. or go to a local phone repair shop and they will do it for a cheap price. i had my nokia repaired from water damage for 15 pounds about 6 years ago.
Tips:
1....Dry it with a towel.
2....Take off the battery.
3....Never put the battery back and turn it on, if you are not sure the unit is totally dry.
4....You can wrap it in tissue (both battery and unit) and put it in a sealed plastic bag of rice grains. Why? Because rice grains are natural desicants. It will absorb all the excess moisture you can't dry with the towel. Leave it there for a minimum of 4 days.
5....You can only place the battery back and turn it on if you are really sure the unit and battery are totally dry.
update
every is working fine. I slept with it to under my pillow. I also check my sim card and that was wet. after I dryed that, i put my sim card in my standby phone.
Everything is working good now!
just a general instuction
1.get the battery out (because watter can't harm it if there is no electricity)
2a.dry it with a towel,just to get rid of any water that could float out of it
2b.dry it with a hairdryer or a radiator. (don't expose to fire)
3.instead of ryce you can use ethanol ( C2H5OH ) to get the water out and to clean it...use a brush to do it
4.try not to drop it again
personaly i dismantle the device when drying it...that way i'm sure there is no water left in it
but for inexperienced people or those devices with warranty...i suggest you don't dismantle it
I took the battery out and placed both battery and phone into instant rice. Works great
working fine
my phone is working fine.
It had some problems, it was the keyboard, kept acting up. so open it and let the keyboard dry (i don't use the keyboard...lol) took out the sim card and dried the area where it was, a little bit of water was on it. Dried it, and put it under my pillow for heat..lol.
Took it to work the next morning and it was having trouble with alignment when i used the stylus. so after redoing the alignment it has been working fine.
Thanks for the help.
Close the thead
Can anyone close the thread for me?
Dropped mine in the toilet!
The unthinkable happened. I have insurance on my tilt... but the thought of a whole day re-flashing and installing software made my stomach hurt.
I did the following-
1. Took out the battery within 10 seconds
2. Took out sim card & the microsd
3. Shook out all the water I could
4. Used a whole can of compressed air to blow any moisture out
5. Placed in a bag with silica gel packets for 30 hours
I was amazed when the thing booted right up! EVERYTHING works perfectly- wifi, GPS, camera, speaker, mic, buttons, and touchscreen! This thing is a tank!
Water Damaged, Turning but Stuck at Boot Screen
hi,
i was standing at sea side my prophet was in my pocket, i thought to put it in a plastic bag, while i was putting it in the bag suddenly a wave came up and dropped over the bag and the bag was filled with water , i took it out turned off and took out the battery, after drying it for a long time i turned it on back it booted up with some strange behavior and then after rebooting few times it got stuck on boot screen, now i have tried so many times to flash the new ROM even hard SPL, everything goes fine but when i turn it on after flashing, it always get stuck at boot screen, can anyone help me plz ?
My Fuze got a wet.
I shook out the water
I powered it on. It came on and everything.
It reset itself.
Then I played with it for a while.
Everything seemed fine until I hit the power button. The screen turned off.
I pressed it again and it wouldn't turn on.
Nothing gets the phone back on at this stage, except taking the battery out and powering up again.
I then decided to do the bowl of rice thing and let it sit for about 7 hours.
It is still the same. If I press the power button at the top of device, it turns off.
If I press it quickly after, it turns back on but if I wait a while, lets say 3-5 seconds, it doesn't turn back on.
Also, the water damage sticker has turned light pink, like 65% of it.
any suggestions
I'm afraid there is probably no help. Even if the water dried completely before turning it back on the impurities in the water probably will cause problems.
I had one drop in some water. Powered it off, disassembled it and dried completely. I let it sit for 8 hours, reassembled it and powered it on. It worked for a couple of hours.
Luckily I had insurance on it.
oh ok
what about warranty, i am still covered
the little white box is still white but mostly pink
its kinda crazii that it turns on and everything works
its just that if i turn off the phone or it turns off automatically due to the power settings, it can't turn on.
the soft reset doesn't work and the power buttton atop the phone doesnt work either
w0w!!!
i just powered on my waater damaged 8525 from 2 yrs ago (had a tilt & fuze since) & it works!!!
b4 it would turn on but the screen wouldnt work
you would have to position it @ a certain angle in order to make anything out
it works now, besides needing to hooked up to the charger in order to load up
fuze is still sitting in a bowl of rice
any more ideas, suggestions...etc
ok, i just realizedthat the soft reset button @ da bottom doesnt function @ all
any idea on how to go about fixing this??
itsjust the screen doesnt come back on but device isnt off because the scroll wheel lights still show up
but it shouldnt because the device isnt charging
Can you warranty a device if the sticker is partially pink?
You can try the warranty, but when they see the water sticker is colored, you're likely to be charged for the cost of the phone. Water won't be covered by warranty, only insurance.
If you want to avoid replacing the phone at your cost, then about the only thing I can think of doing is pulling the battery out and cleaning it thouroughly with distilled water (in other words, another dunking). Do that 2-3 times with fresh distilled water to get rid of as many impurities from the other water as you can. Then let it dry for 24-48 hours (getting some dessicants wouldn't hurt to suck out as much water as you can). Then put a battery in and see what happens.
Odds aren't good this will improve things, but it's possible. It's more likely you'll need to get your hands on a new phone.
You could also try to find a broken fuze online, maybe eBay, but no water damage, and swap stickers.
thanks guys
do the silica packs count?
how would you go about switching the stickers?
is there a particular part i can switch from a used fuze to fix my problem?
wutitizshorty said:
thanks guys
do the silica packs count?
how would you go about switching the stickers?
is there a particular part i can switch from a used fuze to fix my problem?
Click to expand...
Click to collapse
For the sticker, just carefully take it off a different Fuze, hell maybe even a different phone as long as the sticker fits. Take off the pink one on your Fuze and glue on the new one. Should be good as new.
As for swapping parts, it would probably be too much money and trouble to do that, that'll void your warranty right there anyways and there's a chance you'll never assemble the phone back perfectly. Trust me, it has happened to me a lot when I thought I could swap parts.
I've seen a friend of mine do something with one he got wet that actually worked ... he dipped his entire phone in a bowl of rubbing alochol for a few seconds - the pulled it back out & let it dry out for about 24 hours and it's worked. Obviously take the battery out when you do that....
kinda scared about the rubbing alcohol because the phone works for the most part, just not the reset button
i have other devices so im gonna try the sticker swap for now
well the concepton the alcohol dunk is that you need alcohol that is as close to pure alcohol as possible. rubbing is great as previously mentioned. what it does is that it takes the water and vaporizes with the water. the same concept as adding wine or spirits into a soup. it makes the soup thicker and creamier because there is less water in it.. and it also can be used to fix a situation where you use too much water or something....
Hello,
by a rediculous accident I forgot my HTC Diamond in the pocket of my jeans when running the laundry :-(
Afterwards, I opened the cover, took out the battery and let the phone dry out for 2 days. Now I've put it back together, and connected it to the charger. The "ring" is flashing, so the battery is charging but the phone itself is not starting and the display remains completely black, not even the vibration kick on starting...
Is there anything I could do? Or perhaps there is a chance to get out some photos I have shot earlier, would also be something...
ive heard that taking apart your phone and leaving the parts in rice can help (because the rice absorbs moisture)
Off topic:
I read one Desire went through a washing sequence in a washing machine in Desire spesific forum and now this?
Is this a new hobby? I mean... washing smartphone
darkman088 said:
Or perhaps there is a chance to get out some photos I have shot earlier, would also be something...
Click to expand...
Click to collapse
If the photos are on your micro sd card, you may be able to plug that into an adapter and plug it into your PC and gain access to them that way. Just be sure that micro sd card is thoroughly dry before doing so.
WORKING !!!
Hello,
thanks for the replies... This morning the phone booted!!! I was able to download the photos!!! But the screen has stains, obviously the remaining water.
PLEASE advise on how to dry that thing completely !!!
I think that I'm gonna pass on the rice thing.
@aaa - YOU ARE A JUNKA$$ !!! You think that's really funny?!? Especially when I'm currently TIGHT on budget and need the money for other things and the next phone is planned no earlier than Christmas... I'm hesitating whether you're a real human being...
You can dry it completely in an oven for three hours at thirty degrees or so. I've done this three times. If you have a fan forced oven, just turn the fans on, that'll be enough.
A safer way (if you can obtain it) is to leave the phone for 24 hours in a bowl of dessicant silica gel. You'll often get a small packet of silica gel when buying new electronics or other moisture-affected things. That small packet is enough, just put it in an airtight bag and leave it for 24 hours.
The next step would be disassembly and a thorough swabbing with denatured alcohol, but that's pretty extreme and only needed when the device isn't booting.
Some LCDs are hard to get moisture out of, some are not. Leaving the phone with the silica gel for longer will have a better effect. As the previous poster mentioned, rice also works (quite well), but takes longer than silica.
Good luck with it!
Another thin that will absorb moisture is common table salt. Take the phone apart very carefully. Remove battery first, make sure you're grounded as well.
Hello everybody.
thanks a lot for the numerous advices...
Unfortunately, I have more to report...
The phone dried out and booted 2 or 3 days later, as I said. The stains on the display disappeared as by magic one day later.
Everything was fine for a week until I launched the camera 2 days ago. The backlight of the display went off and came back only after removing the batter for 15 minutes.
Now the backlight is going off pretty often, sometimes it requires to remove the battery 1-2 times before it starts working again and yesterday it happened that it got activated again when I got a call...
Any ideas please?
And also the phone keeps overheating from time to time without real load (GPS or wi-fi) which dries out the battery. But I had this problem also before the laundry
Sounds like that moisture in the LCD unit left a bit of residue and is shorting the backlight somewhere.
Only option there would be to disassemble and swab the LCD boards and cables/connectors with denatured alcohol.
Alternatively, a new LCD unit should fix the problem if it persists, just make sure you alcohol swab the connectors before plugging them back in
Someone also mentioned drying out in salt before. While that does work, salt is extremely corrosive on solder and SMCs, so I wouldn't recommend that route.
i heard hair dryers are the bomb at the screen moisture, just take off all that you can and blow dry it.
I just don't understand your refusal on using white rice. It have saved countless phones.
Uncooked white rice is VERY mosture negative. Just put layer of rice, put your phone on it, cover it completely with white rice, seal it in. Ziploc could work too.
In a day or two your partially dry phone will be bone-dry. If it was soaked still you could first try to shake out water as much as can, soak it in distilled water to remove minerals, then white rice it for 3 to 5 days.
I had this problem with my Touch Diamond. Everything worked, but while i was trying to dry it I broke one of the battery "hinges" but the phone still worked after except only with black screen. The best thing to do probably is just leave it for a couple of days and hopefully your phone will be back!
XXCoder said:
I just don't understand your refusal on using white rice. It have saved countless phones.
Uncooked white rice is VERY mosture negative. Just put layer of rice, put your phone on it, cover it completely with white rice, seal it in. Ziploc could work too.
In a day or two your partially dry phone will be bone-dry. If it was soaked still you could first try to shake out water as much as can, soak it in distilled water to remove minerals, then white rice it for 3 to 5 days.
Click to expand...
Click to collapse
exactly what ive said. ive read everywhere that rice is one of the best solutions out there
Like was said before you most likely have some corrosion on a few contacts, if you have about 6 bucks you can spare you can get residue free contact cleaner in an aerosol at radio shack or any electronics store and save yourself having to scrub each contact and connector. Just tear the phone down down spray all the contacts and connectors with contact cleaner let it sit for a few then spray it down with air duster to get any thats get under the resistors, in the connectors, etc that hasn't dried; let it sit till you're positive everythings dry and put it back together. Does the same thing as alcohol just alot less scrubbing.
Sent from my i897 w/Andromeda 3, Suckerpunch kernel, & 1.3Ghz OC using Tegrak.
Hello,
thanks for narrowing the problem down.
But for me it looks like something different, because:
1) I have been using the phone for 1 week without any problems and it got screwed after I've launched the camera app for the first time
2) The backlight works when I power on the phone. But its stop is event-triggered, like when I launch the sound or video player or when I get a call... Similar events would trigger the backlight back on.
Perhaps reflashing the software could fix that?
I went to a shop today and put another battery. The phone booted, anyway without any backlight, twice...
At least the device is still alive.
There probably was a tiny water bubble and it messed with phone when you turned camera on.
darkman088 said:
Hello,
thanks for narrowing the problem down.
But for me it looks like something different, because:
1) I have been using the phone for 1 week without any problems and it got screwed after I've launched the camera app for the first time
2) The backlight works when I power on the phone. But its stop is event-triggered, like when I launch the sound or video player or when I get a call... Similar events would trigger the backlight back on.
Perhaps reflashing the software could fix that?
I went to a shop today and put another battery. The phone booted, anyway without any backlight, twice...
At least the device is still alive.
Click to expand...
Click to collapse
remove the back cover and battery from the phone, and put everyting in a bowl of rice for a day,. should fix everything,
XXCoder said:
There probably was a tiny water bubble and it messed with phone when you turned camera on.
Click to expand...
Click to collapse
Either that or a short in the cameras circuit from corrosion, either way i'd pull it apart before it gets worse and check it out.
Sent from my i897 w/Andromeda 3, Suckerpunch kernel, & 1.3Ghz OC using Tegrak.
Hi all,
First off I would like to thank anyone and everyone that reads this thread, it helps me out if you have any information that could help me out here.
About a week or so ago my girlfriend dropped her Nexus 5 in water, and removed it almost immediately then brought it to me. Sadly the damage was already done and the screen was black. I got the back off and got as much water out as I could shake gently, and the screen still had haptic feedback when I touched it, so I messaged it and it displayed the notification light. This led me to believe the battery was ok, so we left the back off and let it dry for a while, and over time the screen and sound came back. We placed the phone overnight in dry rice, and for the meantime we put her SIM in an old S2. The next morning there was obvious water damage on the screen but less than before, and everything seemed to be working fine, games ran, music played, messages came and went on Hangouts, and when we plugged it in to charge it worked like a charm, so we believed we had gotten lucky, put it back in the rice overnight again and the next day tried putting the SIM card back in the phone.
The Nexus at this point asked to restart and we obliged, but this is when the problem started. It would get to the Google boot screen, hang, then restart, over and over. I tried going into recovery and I could, but no further than that. I am not an expert so don't know what would cause this, but I am led to believe that the battery and everything else is all in working order otherwise it wouldn't have been working and charging while it was on. I wonder if maybe there is a separate part of the phone used for BIOS bootup and it got damaged? Any suggestions or ideas on how to fix the issue would be met with extreme gratitude. Thanks for reading all this.
TL;DR Phone was dropped in water, aired out and worked fine, restarted for SIM card and get stuck in endless boot loop.
QyuBurt said:
Hi all,
First off I would like to thank anyone and everyone that reads this thread, it helps me out if you have any information that could help me out here.
About a week or so ago my girlfriend dropped her Nexus 5 in water, and removed it almost immediately then brought it to me. Sadly the damage was already done and the screen was black. I got the back off and got as much water out as I could shake gently, and the screen still had haptic feedback when I touched it, so I messaged it and it displayed the notification light. This led me to believe the battery was ok, so we left the back off and let it dry for a while, and over time the screen and sound came back. We placed the phone overnight in dry rice, and for the meantime we put her SIM in an old S2. The next morning there was obvious water damage on the screen but less than before, and everything seemed to be working fine, games ran, music played, messages came and went on Hangouts, and when we plugged it in to charge it worked like a charm, so we believed we had gotten lucky, put it back in the rice overnight again and the next day tried putting the SIM card back in the phone.
The Nexus at this point asked to restart and we obliged, but this is when the problem started. It would get to the Google boot screen, hang, then restart, over and over. I tried going into recovery and I could, but no further than that. I am not an expert so don't know what would cause this, but I am led to believe that the battery and everything else is all in working order otherwise it wouldn't have been working and charging while it was on. I wonder if maybe there is a separate part of the phone used for BIOS bootup and it got damaged? Any suggestions or ideas on how to fix the issue would be met with extreme gratitude. Thanks for reading all this.
TL;DR Phone was dropped in water, aired out and worked fine, restarted for SIM card and get stuck in endless boot loop.
Click to expand...
Click to collapse
Take the device apart, remove the motherboard. Get some rubbing alcohol and a tooth brush.
Remove any shields that can be taken off to expose more components. Then start scrubbing!!! Continue until you get all of the green/white corrosion. If there are any black scorch marks on the connections, take a eraser and it will remove the burn mark, then continue to clean with alcohol. Also the flex cable connections would need to be cleaned also.
The next step is up to you, if you feel comfortable with it. Make sure all plastic and rubber pieces are off the motherboard. Then stick it in the oven on 400F for 30 min to reflow some of the solder that may have gotten damaged.
Put back together, you may have to factory reset if the software got corrupted.
It is still highly possible to recover the device.
Good luck!
oOflyeyesOo said:
Take the device apart, remove the motherboard. Get some rubbing alcohol and a tooth brush.
Remove any shields that can be taken off to expose more components. Then start scrubbing!!! Continue until you get all of the green/white corrosion. If there are any black scorch marks on the connections, take a eraser and it will remove the burn mark, then continue to clean with alcohol. Also the flex cable connections would need to be cleaned also.
The next step is up to you, if you feel comfortable with it. Make sure all plastic and rubber pieces are off the motherboard. Then stick it in the oven on 400F for 30 min to reflow some of the solder that may have gotten damaged.
Put back together, you may have to factory reset if the software got corrupted.
It is still highly possible to recover the device.
Good luck!
Click to expand...
Click to collapse
I wouldn't go so far as reflowing solder for a dry-out.
http://www.amazon.com/o/ASIN/B000BXOGNI?tag=adapas02-20
can be attained at your local auto supply, simply disassemble the boards and give them a once-over spray and wipe-down. Reassemble, and then troubleshoot the bootloop, which may require a full stock flash. Good luck!
wideasleep1 said:
I wouldn't go so far as reflowing solder for a dry-out.
http://www.amazon.com/o/ASIN/B000BXOGNI?tag=adapas02-20
can be attained at your local auto supply, simply disassemble the boards and give them a once-over spray and wipe-down. Reassemble, and then troubleshoot the bootloop, which may require a full stock flash. Good luck!
Click to expand...
Click to collapse
I am not reflowing to dry it, sometimes solder on the connections/components need to be reflowed when they got WD or the device will not function correctly.I have seen it more time that I can count.
oOflyeyesOo said:
I am not reflowing to dry it, sometimes solder on the connections/components need to be reflowed when they got WD or the device will not function correctly.I have seen it more time that I can count.
Click to expand...
Click to collapse
There wouldn't be solder damage when OP acted almost immediately to dry it out. A cleaning, further drying should be all that's needed. One should NEVER turn on electronics until fully disassembled, cleaned and dried in any event.
wideasleep1 said:
There wouldn't be solder damage when OP acted almost immediately to dry it out. A cleaning, further drying should be all that's needed. One should NEVER turn on electronics until fully disassembled, cleaned and dried in any event.
Click to expand...
Click to collapse
The second the device hits air corrosion starts to build. Rice does nothing, it pulls a little bit of the water from the charge port and headset jack, basically what drips out. There is possibility that there is still water inside the device. He needs to open it up to scrub it down with a tooth brush and alcohol at least.The connections may break in time even after cleaning, that is why I suggest a reflow.
oOflyeyesOo said:
The second the device hits air corrosion starts to build. Rice does nothing, it pulls a little bit of the water from the charge port and headset jack, basically what drips out. There is possibility that there is still water inside the device. He needs to open it up to scrub it down with a tooth brush and alcohol at least.The connections may break in time even after cleaning, that is why I suggest a reflow.
Click to expand...
Click to collapse
I don't disagree most of this up to the point of reflow, which should be an absolute, last-ditch exercise. If corrosion is a major concern, after cleaning with solvent, a Caig deoxit treatment would be my next advice, but I think reflow is best left to the experienced.
wideasleep1 said:
I don't disagree most of this up to the point of reflow, which should be an absolute, last-ditch exercise. If corrosion is a major concern, after cleaning with solvent, a Caig deoxit treatment would be my next advice, but I think reflow is best left to the experienced.
Click to expand...
Click to collapse
Thanks to both of you for your advice on this. I will go and get some of the cleaning spray you suggested and give all the components a good clean, and will look for any scorch marks that may have occured when it was damaged. I would try flashing the OS as well but I'm not entirely sure how to do that when the phone has not been set up for USB Debugging. I attempted to flash it after unlocking the bootloader, but that didn't seem to work either. I will report back when I have performed the steps and let you know if there has been any progress.
Thanks =)
QyuBurt said:
Thanks to both of you for your advice on this. I will go and get some of the cleaning spray you suggested and give all the components a good clean, and will look for any scorch marks that may have occured when it was damaged. I would try flashing the OS as well but I'm not entirely sure how to do that when the phone has not been set up for USB Debugging. I attempted to flash it after unlocking the bootloader, but that didn't seem to work either. I will report back when I have performed the steps and let you know if there has been any progress.
Thanks =)
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2513701
And to the guy above, sorry if it seemed I was arguing. A few too many drinks at that point.
So... my n5 was submerged into washing maching for at least 10-15 mins. and I'm using the traditional method, ( dip into rice bucket ) and leave it overnight, for the rice to absorb all the moisture and stuff. :crying:
I've remove the sim tray and cover n5 with rice.
I hope when I wake up later, it'll be able to work.
Is there any method I can restore the phone's files even if it is dead?
For example, using adb to control the phone?
Or better yet, if phone is able to boot, but screen is damaged, can it emulate the *image* to some software and we control from there or something?
Please give me all the possible solutions for getting the phone dry up or restore the files..
Update 1: sorry for not reading the main thread in General, was too furious.
When I wake up, tried to turn on, but fail. Then I went to remove the cover, there's water inside, then remove the screw and battery, there's water inside. After drying up everything, I put to rice again. Now I'm in office, hope my phone will wake up from deep sleep dead sleep later.
But still, any idea to recover the files inside the phone? I hope I don't damage the internal when I tried to turn on just now, how to check if battery or the motherboard is damaged?
Help please :crying:
up, updates.
Shouldn't really bump if it's been less than 24 hours. But, I'd leave it in the rice for two days. Overnight isn't long enough. Good luck!
If it starts up and you are unlocked and have a custom recovery you might be able to save files.
Sent from my Nexus 9 using XDA Free mobile app
jd1639 said:
Shouldn't really bump if it's been less than 24 hours. But, I'd leave it in the rice for two days. Overnight isn't long enough. Good luck!
If it starts up and you are unlocked and have a custom recovery you might be able to save files.
Sent from my Nexus 9 using XDA Free mobile app
Click to expand...
Click to collapse
yes, its unlocked and have custom rec and custom ROM installed. I'm just hoping it could boot up or at least show some sign that its still half alive. I really need those files asap. I refuse to use my whatsapp in another phone. And it is my main source of connecting people other than calling.
I would use silica gel over rice
xIceCream said:
When I wake up, tried to turn on, but fail. Then I went to remove the cover, there's water inside
Click to expand...
Click to collapse
Sorry, but your device is now likely not to boot at all regardless what you try now.
Always , Always , Always open up the phone after a water immersion. Open , disassemble completely , rinse with IPA , then distilled water , then dry with a blow drier . Saved an iphone 3g , a samsung s2 , htc desire and desire x like this. My desire x ( after a 15 min dunk in the river ) still works - and it's been 2 years since then.
Rice doesn't work - at all in my experience. And just leaving the battery in for 24h means you have every chance to kill you phone.
Edit : data recovery will be IMO almost impossible without paying at the very least a few thousand dollars. If the EMMC is fried ad another order of magnitude to the bill.
Niflheimer said:
Always , Always , Always open up the phone after a water immersion. Open , disassemble completely , rinse with IPA , then distilled water , then dry with a blow drier . Saved an iphone 3g , a samsung s2 , htc desire and desire x like this. My desire x ( after a 15 min dunk in the river ) still works - and it's been 2 years since then.
Rice doesn't work - at all in my experience. And just leaving the battery in for 24h means you have every chance to kill you phone.
Edit : data recovery will be IMO almost impossible without paying at the very least a few thousand dollars. If the EMMC is fried ad another order of magnitude to the bill.
Click to expand...
Click to collapse
Don't have and don't know where to get IPA at my country here, will search around later.
how in the world would it takes a few thousand dollars. thats insane!! damn.
Hopefully it'll show me some signal of the phone later when I got back from work. :fingers-crossed: But I have a bad feeling. Lol.
Anyway, thanks for your answer! Will note it down
Most of the time there's no chance of reading the NAND using the phone itself.
That means you need to desolder it ( extremely hard for Nexus 5 since it's epoxied as well , you need to mill the pcb from the back side until you reach the solder blobs ) , prototype a break-out board for it , interface it and read it. No one will give you any warranties for the success of the process.
A brand new NAND without glue , full datasheets and known protocol ? 300$ an hour with a 6 hour minimum.
Water damage + glue ? I never got a quote for that , but it's probably going to be 3000$ an hour - and it will take at least 2 hours just to mill the pcb off. Add another hour to clean it , 3+ hours to proto the board and either make it in-house or have it made at some pcb fab (though they won''t bill you for the waiting time if you are lucky ) , another hour to put the chip in , and countless hours to reverse engineer the protocol and get the data out - probably somewhat corrupted as well.
TLDR : unless you need 64bit variables for your income statement NOT worth it.
If the data stored on the phone is so damn important, why didn't you have a backup of it? Why was the only copy of this data on an easily lost, easily broken, unreliable storage medium in your pocket?
The problem with washing machines is you're not just dealing with water, you have some fairly serious soap too, and this is really what your concern is. Soap is alkaline and corrodes the traces inside the phone. You really need to immediately strip the phone down; rinse the phone thoroughly with distilled water and then dry well for a few days.
You should have just put it in the dryer after its wash
Sent from my Nexus 5 using Tapatalk (the older 4.9.5 not that new 4.10 abomination they released for god knows why reason)
GoneTomorrow said:
If the data stored on the phone is so damn important, why didn't you have a backup of it? Why was the only copy of this data on an easily lost, easily broken, unreliable storage medium in your pocket?
The problem with washing machines is you're not just dealing with water, you have some fairly serious soap too, and this is really what your concern is. Soap is alkaline and corrodes the traces inside the phone. You really need to immediately strip the phone down; rinse the phone thoroughly with distilled water and then dry well for a few days.
Click to expand...
Click to collapse
15 minutes , powered on at first in very conductive water ( soap+dirt+hot water) . It's too late for a rinse since I doubt there will be anything working in that phone anymore. Not to mention the mechanical action . If the battery wasn't in it might have survived , albeit with a lot of possible damage.
Ladies and gentleman. My phone survived.
Just plugged back everything, and it boots up. Thank god man. Now I jsut need to back up everything and extract the data out of it. Yay.
My screen has a new 3d effect tho. Water is inside, LOL. It has some nice blue color. Happy me. Woots.
Thank all of you guys for the possible solutions and feedback! Rock on!!
xIceCream said:
Ladies and gentleman. My phone survived.
Just plugged back everything, and it boots up. Thank god man. Now I jsut need to back up everything and extract the data out of it. Yay.
My screen has a new 3d effect tho. Water is inside, LOL. It has some nice blue color. Happy me. Woots.
Thank all of you guys for the possible solutions and feedback! Rock on!!
Click to expand...
Click to collapse
Considering it was in the washing machine, you didn't remove the battery, attempted to turn it on, then water came out when you finally opened it up..
You're lucky it has any sign of life at all.
Lethargy said:
Considering it was in the washing machine, you didn't remove the battery, attempted to turn it on, then water came out when you finally opened it up..
You're lucky it has any sign of life at all.
Click to expand...
Click to collapse
Yes, I know right!
Took out from w.s, turn it on, screen flashes > dip phone to rice for 8 hours > tried turn it on, nothing happens > remove cover and screws and everything > dry up water > dip to rice for another sweet 15 hours ( working + part time studies ), now reached home, assemble everything, turn it on, and WALLA!
Backing up everything now. :fingers-crossed: :highfive: :laugh: :victory:
xIceCream said:
Backing up everything now. :fingers-crossed: :highfive: :laugh: :victory:
Click to expand...
Click to collapse
I am really happy for you Next time though, set up automated backup options so that you don't have to worry about the data inside the phone.
xIceCream said:
Ladies and gentleman. My phone survived.
Just plugged back everything, and it boots up. Thank god man. Now I jsut need to back up everything and extract the data out of it. Yay.
My screen has a new 3d effect tho. Water is inside, LOL. It has some nice blue color. Happy me. Woots.
Thank all of you guys for the possible solutions and feedback! Rock on!!
Click to expand...
Click to collapse
I'm amazed! I suppose it's possible the water was conductive enough to actually put the battery into protection right away
KreAch3R said:
I am really happy for you Next time though, set up automated backup options so that you don't have to worry about the data inside the phone.
Click to expand...
Click to collapse
Thank you! Yea, will do that next time. Painful lesson to learn! Will note that!
Niflheimer said:
I'm amazed! I suppose it's possible the water was conductive enough to actually put the battery into protection right away
Click to expand...
Click to collapse
Yea. Nexus the magician! But all in all, speaker doesn't work, 3.5mm jack doesn't work. At least all my data are there!
Take a backup and buy a new phone. Lol.
Sent from my Nexus 5 using XDA Free mobile app
Could still fail yet..