Database Info

[ROOT][RECOVERY] UNOFFICIAL Alcatel OneTouch Pop 7 p310a Tablet Thread

So I noticed there's no official thread for this tablet. I went ahead a decided to try and get a thread going for this tablet only. I am strongly considering porting a Rom and possibly a recovery pending requests from users on xda for the device.
To ROOT the Alcatel OneTouch Pop 7 p310a
1. Make sure Unknown sources is checked in Settings > Security > Device administration > Unknown Sources
2. You head over to alephzain's ROOT thread and download the framaroot 1.9.3 apk
LINK To Thread: http://forum.xda-developers.com/apps/framaroot/root-framaroot-one-click-apk-to-root-t2130276
3. Follow the directions on alephzain's thread. Move the apk to the SD card and install the apk.
4. The apk will then run after clicking "install"
If successful, your OneTouch Pop 7 p310a will now be rooted after a reboot.
To test, after reboot you should see superuser in the list of installed applications.
Also you can download 'root checker' from Google play to verify.
---------
Clock Work Mod Recovery for Alcatel P310a.
DO NOT FLASH THIS RECOVERY ON ANY OTHER DEVICE OTHER THAN A P310A. THIS MAY BRICK YOUR DEVICE.
WORKING RECOVERY PORTED/TESTED BY Shawnj0
DOWNLOAD LINK ==> https://drive.google.com/file/d/0B4Bp38aW17GiOXpKNEdXQXBSbjA/view?usp=sharing
Any questions, comments, suggestions all should be directed to this thread.

Reserved.
Sent from my ALCATEL ONE TOUCH P310A using XDA Free mobile app

Reserved
Sent from my ALCATEL ONE TOUCH P310A using XDA Free mobile app

UPDATE 1/24/2015: CWM NON-Touch Now Available as a flashable img. You can use Flashify or Rashr (both can be downloaded through Google Play once you are ROOT.

Thank you for this. How many tablets has this been tested on ?

It works !!!! Now we need some lollipop on it !

memory swap mod
shawnj0 said:
UPDATE 1/24/2015: CWM NON-Touch Now Available as a flashable img. You can use Flashify or Rashr (both can be downloaded through Google Play once you are ROOT.
Click to expand...
Click to collapse
Hi, thanks for this.
Will a memory swap mod, to make the tablet see the external SD Memory as the internal storage, work with the P310A?
Searched and found this for another Alcatel device:http://forum.xda-developers.com/showthread.php?t=2284347&page=39
Is something like this already available for the tablet?
Will be a big improvement if this can be ported to the P310A, and then have a 32Gb or even a 64 Gb memory card be seen as the internal storage.
Thanks.

I have one of these little tablets from T-Mobile (gotta love free) and love it. Last night I got an update warning but have not installed it yet. Unfortunately there is very little information for them like custom ROMs or custom recovery. I would even like to find the software and files needed to return the device back to stock if there was ever a problem and it needed to be reflashed back to out of the box state. Let me know if I can help as I would love to see more for this awesome little device.
Btw, interesting fact about T-Mobile 4G on these tablets. The base is 10 USD for 1gb of 4G a month. All T-Mobile tablets also come with free 200mb 4G a month one top of that. If you have the highest plan at T-Mobile (80 USD a month, unlimited everything including 4g, no drop back to 3g at all) then the tablet actually gets 5gb a month of 4G for the 10 USD instead of 1gb.

..

Just installed the latest update from T-Mobile for the p310a and framaroot 1.93 no longer roots it. Damn.

Try this :wwwDOTmgyunDOTcom/m/en
It rooted my tablet and 2 others. It will install a "kinguser" superuser app. Download clockworks superuser from the play store.
Then disable kinguser and allow clockworks superuser to do its job.

TheEditor said:
Just installed the latest update from T-Mobile for the p310a and framaroot 1.93 no longer roots it. Damn.
Click to expand...
Click to collapse
Can you please share what is on the update?
Find out the update is still on 4.2.
According to the Tmo support site is to improve battery, camera flicker and freezing.

That is about all I see in the update. The version is still the same and I have not seen any real difference personally. Kind of wish I hadn't updated.
Btw, thanks for the recommendation. I am rooted again, woohoo.
---------- Post added at 02:46 AM ---------- Previous post was at 02:00 AM ----------
Well, I am rooted but the only SU that will work is the installed KingUser, no others will work for me.

I have the same tablet, but the P310X, not the P310A variant. Is it safe to flash the CWM recovery? I tried booting into this recovery without flashing by the fastboot flash command, but nothing happens after the transfer, the device won't boot into the new recovery.
After a little searching, it seems to me the two varians only differ in the supported cellular networks and frequencies.

Ok so I rooted this device with kingo at first. I kept have su binary issues. I installed cwm and tried to update su binary through there. I tried booting into recovery using quick boot. My tablet is stuck on tmo screen. Hard reseting takes me back to cwm but I have no backup yet , had no time to even make one. Does anyone have one by chance or a way for me to boot back up through cwm?

Recovery flashed successfully and looks great but, no partitions will mount and I cannot flash any .zips. Anyone else having issues?

I flashed the recovery but when I backed up my data and started getting "unfortunately settings has stopped" error
I did all alternatives and was forced to wipe it clean. But when I tried to restore it kept saying MS5 is not found.
So I am screwed now cause although it did clean it, the settings issue is still there and it will not let me open the wifi /buletooth settings/
keeps crashing and sometimes reboots. So I just want to revert back to the original factory firmware.
Does anyone have the original firmware??

Possible lollipop rom?
shawnj0 said:
So I noticed there's no official thread for this tablet. I went ahead a decided to try and get a thread going for this tablet only. I am strongly considering porting a Rom and possibly a recovery pending requests from users on xda for the device.
To ROOT the Alcatel OneTouch Pop 7 p310a
1. Make sure Unknown sources is checked in Settings > Security > Device administration > Unknown Sources
2. You head over to alephzain's ROOT thread and download the framaroot 1.9.3 apk
LINK To Thread: http://forum.xda-developers.com/apps/framaroot/root-framaroot-one-click-apk-to-root-t2130276
3. Follow the directions on alephzain's thread. Move the apk to the SD card and install the apk.
4. The apk will then run after clicking "install"
If successful, your OneTouch Pop 7 p310a will now be rooted after a reboot.
To test, after reboot you should see superuser in the list of installed applications.
Also you can download 'root checker' from Google play to verify.
---------
Clock Work Mod Recovery for Alcatel P310a.
DO NOT FLASH THIS RECOVERY ON ANY OTHER DEVICE OTHER THAN A P310A. THIS MAY BRICK YOUR DEVICE.
WORKING RECOVERY PORTED/TESTED BY Shawnj0
DOWNLOAD LINK ==> https://drive.google.com/file/d/0B4Bp38aW17GiOXpKNEdXQXBSbjA/view?usp=sharing
Any questions, comments, suggestions all should be directed to this thread.
Click to expand...
Click to collapse
i have this device and i have searched pretty much everywhere for a mod. can you show me how i could get a lollipop mod ( if there is one available). its a pretty nifty device and it i'm hoping to get the lollipop experience on it. Thanks.

Crying on the inside
SO, i did the absolute unthinkable of unthinkable actions. i attempted to flash what was purported to be a POP 7 MIUI port, and the damn thing crashed on me. To make matters worse, the backup with CWM failed when attempting to back up /system. Anyone manage to get it to work?

Sir Webb said:
I flashed the recovery but when I backed up my data and started getting "unfortunately settings has stopped" error
I did all alternatives and was forced to wipe it clean. But when I tried to restore it kept saying MS5 is not found.
So I am screwed now cause although it did clean it, the settings issue is still there and it will not let me open the wifi /buletooth settings/
keeps crashing and sometimes reboots. So I just want to revert back to the original factory firmware.
Does anyone have the original firmware??
Click to expand...
Click to collapse
I have it
SuperUser666 said:
SO, i did the absolute unthinkable of unthinkable actions. i attempted to flash what was purported to be a POP 7 MIUI port, and the damn thing crashed on me. To make matters worse, the backup with CWM failed when attempting to back up /system. Anyone manage to get it to work?
Click to expand...
Click to collapse
Did you ever get this working? I have this tablet rooted, but no recovery...
I don't mind giving either of you my backups from titanium

[Completed] Help w/ Installing CWM on Z3V

Hello, after a good two weeks of frustration and a soft-bricked phone, I'm happy to say that I've finally managed to root my first phone, with huge thanks to various threads on here.
I now, however, have run into another problem. Firstly, I'm using an Xperia Z3V, Android version 4.4.4 w/ build 23.0.E.0.376. I've downloaded BusyBox, ROM manager, ROM Toolbox Lite, and Titanium Backup (all suggested from another thread here). What I'm trying to accomplish is setting up a recovery w/ CWM, but according to ROM manager, my phone isn't supported, nor can I update my ROM (which I'm assuming is because I'm on stock ROM).
How would I go about getting CWM? Would I need Cyanogen, or another ROM in general? Or is the Z3V currently just not supported? Is it necessary to have CWM if I, say, just plan on using my phone for normal activities (I.E., Facebook, YouTube, Emails, etc.). The only thing outside of normal use would be upgrading to Marshmallow.
Thank you, again, for the tremendous help.

Hi
As explained here, XZDualRecovery should work fine on your device.
Please check this guide: http://forum.xda-developers.com/z3/xperia-z3v-general/guide-sony-xperia-z3v-t3100402
Thanks for writing to us at XDA Assist,
Good luck :fingers-crossed:

[Completed] Need factory image for jellybean 4.3 kyocera hydro c6530n I am bootlooped.....

I have a original rom kyocera hydro c6530n rooted and used lucky patcher and messed things up royally from there after installing or trying to rather modded play store never worked all kinds of google errors gapp, service, no network connection and than no play at all applied all (as far is google concerned) fixes. never back to normal need less to say i uninstalled reinstalled all kinds of play stores reset rooted device to later find out I dont have any clue what I am doing obviously. I have reset to factory and hard reset and now I am stuck in bootlooper because I thought that re flashing with flashify would be the answer and yes I may have to get a new phone because wow but I flashed a boot image from the system uid I think I figured they wont give me an option if not viable. So now i am boot looped I do think i know that i can download my original jellybean 4.3 and flash to this device which is another matter and how would i do this i thought odin but not for kyocera and i find that there is no custom roms etc or recovery for this device.
My quetsions are
1. where do i get the download for jellybean factory image
2. how would i install from pc (my computer recognizes it still)
3. can i install a new rom persay and again back to #2
Thank you so much

mjkuhne said:
I have a original rom kyocera hydro c6530n rooted and used lucky patcher and messed things up royally from there after installing or trying to rather modded play store never worked all kinds of google errors gapp, service, no network connection and than no play at all applied all (as far is google concerned) fixes. never back to normal need less to say i uninstalled reinstalled all kinds of play stores reset rooted device to later find out I dont have any clue what I am doing obviously. I have reset to factory and hard reset and now I am stuck in bootlooper because I thought that re flashing with flashify would be the answer and yes I may have to get a new phone because wow but I flashed a boot image from the system uid I think I figured they wont give me an option if not viable. So now i am boot looped I do think i know that i can download my original jellybean 4.3 and flash to this device which is another matter and how would i do this i thought odin but not for kyocera and i find that there is no custom roms etc or recovery for this device.
My quetsions are
1. where do i get the download for jellybean factory image
2. how would i install from pc (my computer recognizes it still)
3. can i install a new rom persay and again back to #2
Thank you so much
Click to expand...
Click to collapse
Greetings,
Thank you for using XDA Assist. There are no specific forums for your device on XDA. However, you may ask for more help here:
Android Q&A, Help & Troubleshooting
Good luck!

[Completed] Vodafon Tab 6 prime Stuck in BootLoop, Restore does not work.

Hi, i have a vodafone tab 6 prime;
Model number VF-1497
Android Version 5.0.2
Baseband version: M8939AAAAANLYD2035A.1
Kernal Version: £.10.49-g0f957a6 [email protected] #1
Buld number 01001
Custrom build version 060FKG1
I had kingroot installed on my tablet, which worked fine, (i was trying to install linux on my tablet with no success, app on app store which required root permission), my system was unaffected, and worked fine, then there was a system update on google i think, but when i tried to update the system it said the device had to be unrooted, so i went into kingroot and managed to click on re-root, then i deleted king root and all assosiated files, all good i thought, i managed to get the updates but the device needed rebooted to apply, when i did my device is now stuck in boot loop which i presume that kingroot has locked all permisions to the device i may be wrong. I have looked for a stock rom/custom rom to no avail,, i can get into the hard reset on the device, i have cleared/wiped the cache, clicked on factory reset, several times. but still boots into dead android with no command error. I can still get into the recovery system and i have tried the adb sideload to load a back up but it gives error :closed.
i have a second tab prime 6 which i got the details i posted above from, the two devices are identical but i have no idea how to clone/copy or download the rom file. i have no idea how to change permissions and i have no special recovery softward installed like clockworkmod or nandroid. just the basic system, any ideas would be appreciated. so far i have spent 2 weeks researching with no luck. thanks in advance for any help.

L0110 said:
Hi, i have a vodafone tab 6 prime;
Model number VF-1497
Android Version 5.0.2
Baseband version: M8939AAAAANLYD2035A.1
Kernal Version: £.10.49-g0f957a6 [email protected] #1
Buld number 01001
Custrom build version 060FKG1
I had kingroot installed on my tablet, which worked fine, (i was trying to install linux on my tablet with no success, app on app store which required root permission), my system was unaffected, and worked fine, then there was a system update on google i think, but when i tried to update the system it said the device had to be unrooted, so i went into kingroot and managed to click on re-root, then i deleted king root and all assosiated files, all good i thought, i managed to get the updates but the device needed rebooted to apply, when i did my device is now stuck in boot loop which i presume that kingroot has locked all permisions to the device i may be wrong. I have looked for a stock rom/custom rom to no avail,, i can get into the hard reset on the device, i have cleared/wiped the cache, clicked on factory reset, several times. but still boots into dead android with no command error. I can still get into the recovery system and i have tried the adb sideload to load a back up but it gives error :closed.
i have a second tab prime 6 which i got the details i posted above from, the two devices are identical but i have no idea how to clone/copy or download the rom file. i have no idea how to change permissions and i have no special recovery softward installed like clockworkmod or nandroid. just the basic system, any ideas would be appreciated. so far i have spent 2 weeks researching with no luck. thanks in advance for any help.
Click to expand...
Click to collapse
Hello,
Thanks for using XDA Assist.
There's no dedicated forum for your device here in XDA.Try posting your query in Android Q&A,Help and Troubleshooting or in one of the noob friendly Q&A thread here->[Ask Any Question][Newbie Friendly] .Experts there may be able to help you!
Good Luck
___
v7
XDA Assist

[Completed] WiFi won't turn on ( endless WiFi turning on loop )

Hello,
So yesterday I downloaded and installed it along with the most recent gapps linked on wiki page of CM. When it installed and I unlocked the device there were alot of Google Play error popups, but the WiFi was working. So afte I went on and downloaded and installed another Gapps which seems to be working just fine I ran into another error-my WiFi is in an endless turning on loop. So far I have tried recovering back to the pre CM13 install version which sadly didn't solve the problem. How can I fix this issue, it happened to me before and the solution was to simply recover to last version but this time it doesn't work.
Phone: HTC ONE M8
Software: CM13

XDA Visitor said:
Hello,
So yesterday I downloaded and installed it along with the most recent gapps linked on wiki page of CM. When it installed and I unlocked the device there were alot of Google Play error popups, but the WiFi was working. So afte I went on and downloaded and installed another Gapps which seems to be working just fine I ran into another error-my WiFi is in an endless turning on loop. So far I have tried recovering back to the pre CM13 install version which sadly didn't solve the problem. How can I fix this issue, it happened to me before and the solution was to simply recover to last version but this time it doesn't work.
Phone: HTC ONE M8
Software: CM13
Click to expand...
Click to collapse
Hello, and welcome to XDA!
If you flashed the different GApps without reflashing the ROM, something odd may have got stuck.
Try a factory reset, reflash the ROM and then the right Gapps. Test.
If still a looping wifi, you may need to restore your stock backup or at worst, RUU back to stock and start over.
Any questions about any of this, can ask in the following thread:
> HTC One (M8) > One (M8) Q&A, Help & Troubleshooting > [HELP THREAD] HTC One M8 - Ask any questions here!
Please note, to post there, you will need to have an XDA account.
Hope this helps, and good luck!