I am in stock Lolipop 5.0.2 Asian Retail. Nothing messed up with it. Suddenly when i am unlocking the screen it gets back to lock again. i cant get pass from lockscreen even after reboot also. i cleared the cache and even did a factory reset but nothing is helping me getting pass the lockscreen.
abhisekmaiti said:
I am in stock Lolipop 5.0.2 Asian Retail. Nothing messed up with it. Suddenly when i am unlocking the screen it gets back to lock again. i cant get pass from lockscreen even after reboot also. i cleared the cache and even did a factory reset but nothing is helping me getting pass the lockscreen.
Click to expand...
Click to collapse
pin lockscreen? (sim card)
bejunk said:
pin lockscreen? (sim card)
Click to expand...
Click to collapse
Pin/Pattern/ slide, its happening in every option of lock screen. when i unlock the screen the screen goes black and i have to press the power button which shows the lock screen again. sometimes it works for some moment and again goes black and back to lock screen.
Related
Hi,
I rebooted my sensation and after around an hour the CM boot screen just froze. I tried rebooting it again and it did the same.
Ive now factory reset it and when running through the initial setup it gets to to the section where you select the time and date etc. then the setup says it has crashed. After pressing force close I just get a black screen with the notifcation bar at the top and im unable to do anything?
Can anyone help with this?
Thanks
Tom
are you still s-off right? so wipe all and flash the rom again
tombullock92 said:
Hi,
I rebooted my sensation and after around an hour the CM boot screen just froze. I tried rebooting it again and it did the same.
Ive now factory reset it and when running through the initial setup it gets to to the section where you select the time and date etc. then the setup says it has crashed. After pressing force close I just get a black screen with the notifcation bar at the top and im unable to do anything?
Can anyone help with this?
Thanks
Tom
Click to expand...
Click to collapse
Are you using a factory or custom ROM?
matt95 said:
are you still s-off right? so wipe all and flash the rom again
Click to expand...
Click to collapse
Sorted
The CM7 ROM I had saved on my SD card did the same thing but I redownloaded it and it worked!
Thanks!
So today my droid started messing up, home and recents button didnt work. Google play store and whatnot couldnt access data, the signal status bar at the top was just grey.
So i factory reset it. During the reset it just sat there on the little screen with the spinning hexball thing for like an hour so i shut the phone off. Now every time the phone boots it just tries to wipe it again unless i go into the boot menu and hit normal boot.
Running stock rom and whatnot, but im rooted.
I know that theres a flag somewhere that it reads on boot saying to wipe it, but dang if i know what to change.
Thanks in advance
Well i unrooted my phone and tried to let it redo the factory reset again, and it still just wont do anything.
jombo2323 said:
home and recents button didnt work
Click to expand...
Click to collapse
When this happens to me, it's because of a bad flash and a factory reset won't fix it. I would suggest reflashing stock...
coolloser said:
When this happens to me, it's because of a bad flash and a factory reset won't fix it. I would suggest reflashing stock...
Click to expand...
Click to collapse
I dont have a custom recovery or an unlocked bootloader.
I managed to get the problem sorted out through some unrooting and some non stock system file deletion. Installed safestrap and got blurry hd running on it now.
Thanks.
Hi,
I'm using an unlocked Nexus 5, and flashed as soon as the factory image was released. I used CF-Autoroot to gain root access.
The problem that I'm having is that the lock screen does not work. This means that when I lock the phone (power button), it just fades to black, but when I hit the button again (either immediately, or after a wait), I go straight to where I was, the lock screen does not activate no matter what I do. I've tried letting it time out, still no luck.
When I restart the phone, it shows the lock screen, but sounds like something is trying to unlock the phone, and the phone then unlocks and doesn't lock again. I've tried disabling all Device Administrators, with no luck. I tried a factory reset and then a re-flash followed by another factory reset, and the problem still persists. I've also tried toggling Smart Lock on and off, still no change.
If I go to the security settings and re-select a Screen Lock mode, then the lock screen shows up again, but after I unlock, it goes away never to return.
This has been extremely frustrating, since Smart Lock was one of the features I was most looking forward to. Does anyone know what could be causing this?
The current Root apps that I use are:
1. SuperSU (obviously) 2.23 BETA
2. BusyBox Free
3. AutomateIt Pro
4. Greenify
5. Power Toggles
6. AdAway
7. Titanium Backup
Another note: After the factory-reset, wipe, flash, factory-reset that I did, I restored all non-system Apps and data with Titanium Backup. Just putting this here in case you guys know of any app that causes this problem.
Ekitrak said:
Hi,
I'm using an unlocked Nexus 5, and flashed as soon as the factory image was released. I used CF-Autoroot to gain root access.
The problem that I'm having is that the lock screen does not work. This means that when I lock the phone (power button), it just fades to black, but when I hit the button again (either immediately, or after a wait), I go straight to where I was, the lock screen does not activate no matter what I do. I've tried letting it time out, still no luck.
When I restart the phone, it shows the lock screen, but sounds like something is trying to unlock the phone, and the phone then unlocks and doesn't lock again. I've tried disabling all Device Administrators, with no luck. I tried a factory reset and then a re-flash followed by another factory reset, and the problem still persists. I've also tried toggling Smart Lock on and off, still no change.
If I go to the security settings and re-select a Screen Lock mode, then the lock screen shows up again, but after I unlock, it goes away never to return.
This has been extremely frustrating, since Smart Lock was one of the features I was most looking forward to. Does anyone know what could be causing this?
The current Root apps that I use are:
1. SuperSU (obviously) 2.23 BETA
2. BusyBox Free
3. AutomateIt Pro
4. Greenify
5. Power Toggles
6. AdAway
7. Titanium Backup
Another note: After the factory-reset, wipe, flash, factory-reset that I did, I restored all non-system Apps and data with Titanium Backup. Just putting this here in case you guys know of any app that causes this problem.
Click to expand...
Click to collapse
I'm facing the same issue with my NON-rooted Nexus 4.
Anybody having any ideas?
Arijit
arijitmaniac said:
I'm facing the same issue with my NON-rooted Nexus 4.
Anybody having any ideas?
Arijit
Click to expand...
Click to collapse
Mine fixed itself after I manually installed the latest Google Play Services apk. Maybe try that and see if it works for you...
I have had my phone encrypted for a while now. The other day I decided to install the Google Screenwise app since I take part in the panel. During the setup process it said I had to enter my pin because it "affected" encryption. Well I entered it and went about my business.
Now for the weird part. I needed to restart my phone later on and as it booted up, where it would ask me for my pin before it would boot Android, it now flashes a grey screen really fast and continues booting to the lockscreen where I can enter my pin. When I check under settings it says that my phone is still encrypted, and yet never ask me for my pin during boot up.
Anyone know what's going on here? Am I going to have to do a factory reset to get encryption working correctly again?
I am on Cyanogen OS 12.1 build YOG4PAS3JL.
BluGuy said:
I have had my phone encrypted for a while now. The other day I decided to install the Google Screenwise app since I take part in the panel. During the setup process it said I had to enter my pin because it "affected" encryption. Well I entered it and went about my business.
Now for the weird part. I needed to restart my phone later on and as it booted up, where it would ask me for my pin before it would boot Android, it now flashes a grey screen really fast and continues booting to the lockscreen where I can enter my pin. When I check under settings it says that my phone is still encrypted, and yet never ask me for my pin during boot up.
Anyone know what's going on here? Am I going to have to do a factory reset to get encryption working correctly again?
I am on Cyanogen OS 12.1 build YOG4PAS3JL.
Click to expand...
Click to collapse
You need to re-enable the pin from lockscreen options
Sent from my A0001 using Tapatalk
cloudx720 said:
You need to re-enable the pin from lockscreen options
Sent from my A0001 using Tapatalk
Click to expand...
Click to collapse
I think you misunderstood. The lockscreen still ask for a pin. When the phone has encryption turned on, when you either restart or turn the phone on you will receive a prompt on a grey screen to enter you pin. At this point Android hasn't fully booted yet. It then checks the pin and then boots Android. My phone is no longer brining me to this grey screen, it flashes grey but seems to just skip that screen. It is just fully loading android all the way.
BluGuy said:
I have had my phone encrypted for a while now. The other day I decided to install the Google Screenwise app since I take part in the panel. During the setup process it said I had to enter my pin because it "affected" encryption. Well I entered it and went about my business.
Now for the weird part. I needed to restart my phone later on and as it booted up, where it would ask me for my pin before it would boot Android, it now flashes a grey screen really fast and continues booting to the lockscreen where I can enter my pin. When I check under settings it says that my phone is still encrypted, and yet never ask me for my pin during boot up.
Anyone know what's going on here? Am I going to have to do a factory reset to get encryption working correctly again?
I am on Cyanogen OS 12.1 build YOG4PAS3JL.
Click to expand...
Click to collapse
If you set up pin code again will ask if you want pin to boot.
You have two option
One is pin to boot
Other pin after boot
I do not use screenwise for related issues
But i am familiar with encryption
Encryption will exist unless do factory reset
geowolf1000 said:
If you set up pin code again will ask if you want pin to boot.
You have two option
One is pin to boot
Other pin after boot
I do not use screenwise for related issues
But i am familiar with encryption
Encryption will exist unless do factory reset
Click to expand...
Click to collapse
I didn't even know it had the other option in it to ask for the pin during boot up. I would have thought if there was an option for that it would be in the Security menu with encryption rather than the lockscreen menu. Thanks.
Hey there fellow XDA'ers, I seem to be having an issue with my XT1032 right now, it was working fine up until last night; for some unknown reason, when I tried tapping on the Network icon when you pull down the notification bar from the top of the screen to toggle my Mobile Data, it didn't do anything, just went back to home screen. So then I tried rebooting it and now says No SIM Card (and did try turning it off, take out the SIM, reinsert it and turn it back on), and all of my recent apps are still there. Usually none are in 'recent apps' after a reboot, and when I tried to go into Settings then tap on 'More' (under Wireless & networks section) it does nothing (but just force close I guess?), and goes back to Home Screen. And well now it won't boot past the Bootloader Unlocked Warning screen, it doesn't loop though so it's not caught in a bootloop, but I don't know what the hell happened; nor have been able to find a fix for it. It was rooted, but had to flash the Stock ROM then did the OTA updates (it was @ 4.4.2 while rooted then OTA'd up to 4.4.4, then 5.0.1 then 5.1) and there's no custom Recovery either, so it's all stock right now. Any suggestions? Thanks!