[Q] Is my power button broken? - ONE Q&A, Help & Troubleshooting

Hey guys,
Well, this sucks. Randomly today my power button decided not to do anything anymore. I've done some googling, and found people who have some problems unlocking with it, but i can't even use it to lock my phone.
For now, I can use the phone by letting it autolock, and unlocking by double tapping the screen, but obviously this is not something I will be able to keep on doing.
My main problem is, I wanna try the good old haaaveyoutriedturningitoffandonagain, but the only way to shut it off is probably to just let the battery run out.. And then I'm scared that I won't be able to turn it back on again
Is this a known issue? Or is it probably just random hardware failure. Can any of you wizards help me out?
Thanks a lot in advance!

well that's odd never heard anything like this before...did you try to use your power button when you r not in OS...for instance try to go to recovery using volume- and power....or fastboot by volume + and power...

Related

HTC Touch Pro power on button problem

Hi guys, I find this quite annoying and wish there is a mod for this. I don't know about other HTC Touch Pro owners but i find my fone quite sensitive.........it's "EASILY" turned on by a single "SHORT" press of the power button.
I didn't even hold it for 1 second, if i suddenly press or tap on it really quick, for not even a second, it turns on.
In case ppl don't understand and tell me that maybe my fone was on in the first place but just have the backlight off, and with a single tap on the power button, the backlight goes back on again. I knew that already. But what the problem really is, is that it's totally off, and when i tap the power on button, it turns on, i.e it vibrates and shows the welcome screen and all that other startup animation.
Is there a way to increase the delay of the finger-press on the power button? Coz it's so annoying that it gets turned on when i don't want it to, especially since this fone's weakness is that it hogs battery even though i've already applied tons of tweaks etc to lower the performance and increase battery life......
Oh and i have another problem, i find the signal kinda weak, is there a program or tweak to increase the signal?? Coz on my old phone Sony Ericsson W950i, the signal is great and I never have bad signal problems with it. But using HTC Touch Pro, i have this problem. This only happens when i'm at Uni, but it's not like they have bad reception or signal blockers there like how schools or colleges have. Just that when i'm inside buildings and there're tons of other buildings around, i can't send the txt coz of bad signals and it's bloody annoying, but using my W950i works fine.....
also I noticed that when i type a txt message using the hardware keyboard, it seems to fail to send most of the time, but only when i'm in UNI. But if i switch to the software keyboard, the one that you use ur fingers or stylus, then when i send the message it often works compare to using hardware keyboard.......any ideas?
Problem No 1: Try Touch Lock Pro
Problem No 2: Try to burn the newest RadioROM.
thx but i'm not trying to lock my phone, so i don't think TouchLock Pro is what i need.......
My Raphael turns also on after pressing the power button for a little few moment. With touchlock Pro you can prevent that you mistake your Raphael. I hope you can understand what I write in my "own" english
Ok so i've got it installed now and went through all the settings but couldn't find anything that can delay the power-on button press, I still have this problem. The app is a screen-lock app, there aren't any options regarding to power-on delays.......
plz tell me what settings etc to use.
I've never said that you can fix your problem with TouchLock Pro. With this you prevent to use your Raphael when you press your power button accidentally.
ya but that's only useful when my fone is on and it locks the phone but i'm trying to prevent my fone from turning on in the first place if i accidentally press the power on button for not even 1 second, because then it will turn on and i don't want that.
same problem here...the phone I thought I had turned off was back on, because accidently it got touched by something else in my luggage.
The only solution which to me is unsatisfactory, is to take out the battery so that it cannot power up.
C'mon...there has to be a better solution than this, no???
jewelkobayashi said:
same problem here...the phone I thought I had turned off was back on, because accidently it got touched by something else in my luggage.
The only solution which to me is unsatisfactory, is to take out the battery so that it cannot power up.
C'mon...there has to be a better solution than this, no???
Click to expand...
Click to collapse
wow yay finally someone else other than me also report having the same problem, boy am i glad to know that i'm not the only one having this problem, i thought it was just something wrong with my fone and not all HTC Touch Pros....
i can't believe there aren't any results on Google, no forum discussions or solutions to this whatsoever. Also, nobody seemed to report this problem or come up with a solution on XDA as well as other forums i use like PPCgeekz or WMusers etc.........which is odd considering how this problem is quite annoying, that if u suddenly power on the fone by accident, it can drain battery life and god knows HTC Touch Pro has a crap battery life.............
I think that htc has done a bad job testing the powerbutton on the tp2.
There are some other things like weith, thikness and batterylife that could be improved but the powerbutton issue is realy a BIG bug.
Why they didn't make a slidebutton or a timeout between push and activation?
A dobble tap on the powerbutton could also be a solution.
The next rom shoold have a improvement about this button.
People, please react on the powerbutten problem so someone can fix this.
Thanx
jewelkobayashi said:
same problem here...the phone I thought I had turned off was back on, because accidently it got touched by something else in my luggage.
The only solution which to me is unsatisfactory, is to take out the battery so that it cannot power up.
C'mon...there has to be a better solution than this, no???
Click to expand...
Click to collapse
Leaving the Touch Pro (Raphael) for some minutes without battery will stop the clock. So, when you put back on the battery and power up the device, the clock will display the wrong time. The time when you remove the battery.
This is hardware related.
Can produced different symptoms though.
Facts Behind the Power Button
If take a look at the inside of the powerbutton, there are 2 points making contact when you press the button. If you press it, the software will recognize this and the screen will turn off.
If you press it long enough you'll get the "QuickShutdown" message.
But, if water/alchohol/liquid gets underneath the button, the 2 points may be making contact, because water/alcohol conducts.
The button is very weak. Due to this, it may not properly work if you have used it for a long time.
As a result, despite the fact that you hit hibernate/sleep/suspend on the hardware power button = yes, the screen fades to black. But IT IS STILL ON. That explains the battery being drained.
Solution:
Open the phone hardware. Clean the power button connector manually.
Disassembling Instructions:http://www.pdacenter.ru/razborka/htc-touch-pro/
Power Button Connector: http://kudryashovda.ru/content/ne-rabotaet-knopka-vklyucheniya-na-htc-diamond
off / on / off on
i heart everyone talking about the sleep of death and to be honest, i havent really experienced this, but i definatley do have an intermitent power on and off button problem on my touch pro 2.
i read on some other forum that it could possibly be the slider that is casuing the problem. but to be honest, the button its self feels fine and looks fineand when i does work it works a treat. i havent had any water damage done to it what so ever. so im not sure , i am new too all this self help mobile stuff. so please excuse my ignorance. Ive doen the usual hard reset, button works for a few hours then calls it a day. soft rest, was working up until this week. i cant get ot to boot up again, while fiddling with the batter and a power lead. but the power button is so intermitent its driving me nuts. id be so grateful if anyone could shine any form of light on this. thanks in advance

[Q] Power Button Not Working

Hi guys,
I have a little problem where my phone's power button will not function in any way, long presses, short, almost embedding my thumb in it, all to no avail. This is doubly dissapointing as I have just installed the latest dexter plus patch to fix the problem. I still had the problem on the previous version and I thought a clean start may fix it. The only way I can get the screen on is to press the media play button! Which of course isn't doing anything on dexter.
Hunches:
I have been playing with a light sensor program and using a 3 second press to turn the phone off, I am only thinking this is related as when I re-installed then turned off the phone using a battery pull, that now the media gallery button will now not work at all, so that is a change.
Second, the power button is buggered. Seems unlikely as everthing feels normal, no big drops have occurred from heights, and the button is travelling in and out as usual.
I have also noticed that as soon as I re-insert a battery that the phone starts immediately, the M pops up as if it is already posting. So maybe it is stuck down?? Again, I don't think so, as the mechanism is working per usual.
If anyone can help it would be fantastic, you guys haven't let me down yet, and this thing is purring, but unfortunately I cannot use it lol. Just my luck.
Thanks in advance
another thing, still not solved
Another thing is happening, the phone screen turns on "after" pressing the power button, it may be once or a few times, and then pressing the gallery button.?!?!
Also, at random times it plays a podcast on my phone, the exact same podcast, and from the start, though the duration may be a few seconds then repeat, or it may go for ages, its quite a rude podcast too which has caused me to throw my phone under the car seat to shut it up when people have been trying to talk to me, as you can imagine its quite embarassing.
There are no services or apps running that I can find related to music, it may happen after pressing the camera button, or opening a website.
It is still going really fast though. And I have also reinstalled the light sensor program so I can turn it on and off without causing damage to the power button.
Thanks again everyone.
pisceanblue said:
Another thing is happening, the phone screen turns on "after" pressing the power button, it may be once or a few times, and then pressing the gallery button.?!?!
Click to expand...
Click to collapse
please clarify
sure, so the only way I can get the screen to turn back on, after turning off as per display power saving preferences, is by pressing the power button, maybe a couple of times, then following that up by pressing the gallery button next to the shutter button, pressing the gallery button doesn't seem to be working to turn the screen on now, but this combo is.
I hope that helped.
Cheers.
EDIT:::
The gallery button alone is working again. sorry guys.
You might just want to reflash it to stock to see if this resolves the problem.
Yeah I think I may have to.
Before I do., I was reading a post on a different forum where another person was having a similar issue. They seemed to solve the problem by using rom manager to boot to a manual restore menu where there was a button tester section, after using it the power button worked for them. I tried but after resetting it displayed a triangle graphic then rebooted.
Is there any way to do this with our open recovery program or any other utility to test the functionality or maybe reset the button or apply a patch etc.
Thanks again :-D
Sent from my XT720 using XDA App
Getting Frustrating
Alright so I followed your advice on your videos on how to reflash to stock, so of course my bootloader does not show up the same as yours on the video. I can get to the bootloader fine, using the button combo or by using quick boot > bootloader, both have the exact same result, the boot loader screens as follows:
Bootloader Fastboot mode
80.89
and that is it....
Also, my computer using rsdlite does not acknowledge the phone, not omap drivers loading etc. Followed your instructions exactly.
This is frustrating me to no end lol.
I am guessing that because I can get to the bootloader with combo no problem, that the buttons physical connections are working.. At least thats a positive.
Can I flash to stock with openrecovery? Or maybe to an earlier version of Dexters froyo? Other ideas?
Any help would be much appreciated guys, trying to use this phone at work with light sensors to turn off screen is not as easy as they say. OMG....
Thanks so much
pisceanblue said:
Bootloader Fastboot mode
80.89
Click to expand...
Click to collapse
The fastboot bootloader isn't the right one. So... if you hold volume up + camera shutter while powering on you end up in fastboot? That's really weird.
Maybe your keys have been remapped somehow? Does anyone know a chord to boot fastboot? Perhaps check to see if your USB port is clean?
Lmao
Just my luck to have a weird problem. I thought it may have been remapped so I have been trying the program buttonremap. It doesn't seem to let me do anything except stop the buttons I re assign doing anything :'(
Does anyone have a proper key mapping file that I can replace with my faulty one to hopefully fix it?
Or any other ideas?
Cheers everyone
Sent from my XT720 using XDA App
Just checked my system / user / keylayout folder. How many files are supposed to be inside, there are a few. I checked the contents of some and they seemed to be the same. Just an idea.... thanks again.
Sent from my XT720 using XDA App
Ok installed anyunlock it allows you to use any physical button to unlock the screen. It doesn't respond when the Power button is pressed, it responded fine to volume rockers, gallery and shutter though.
Anyone know if this would mean for sure its a physical problem before I crack it open and try and fix it.
Thanks guys.
Sent from my XT720 using XDA App
No one has any solutions for me? Come on guys.
Sent from my XT720 using XDA App
Breakthrough!
I am pretty sure I have fixed the problem, I tapped the phone fairly hard on its sides and back, and lo and behold after a battery pull and replacement it didn't turn itself on, I waited, nothing, so then I held the power button and it started up!!!!
But....I have another problem that happened before that, I am stuck in the boot animation that open recovery uses before going into its program (i.e. where you can load nandroid, wipe dalvik cache etc).
I was about to load a new rom, and was in open recovery, had installed it and about to do the reset and the phone turned itself off, and thats when I got the problem with the sticking boot animation.
So just to be clear, I am stuck in a boot loop, but not with the M logo, the restore logo.
I hope the power button solution can help someone else, as random as it is.
If anyone could help me get out of this boot loop without flashing stock that would be great. ( i can get to the real bootloader now btw)
Thanks again everyone.
Solved it all
Just took the sd card out and rebooted. And the power is getting better after banging it.
Thanks to all.
Sent from my XT720 using XDA App
pisceanblue said:
Solved it all
Just took the sd card out and rebooted. And the power is getting better after banging it.
Thanks to all.
Click to expand...
Click to collapse
So, is your conclusion is that the button was stuck and the banging freed it? It doesn't restick?
The Button is not perfect still. Sometimes over sensitive Occasionally it will not even work but it works most of the time. I am just wondering what cleaning solution I could use to free it some more.
It has certainly been a trying problem. Cheers for the help.
Now I need to figure out why I have this strange ghosting on the top of my screen.....
Sent from my XT720 using XDA App
Samsung Galaxy S2 Power Button Not Working
Hi Guys,
Any solution for the power button problem? Current latest Android 2.3.3 Samsung Galaxy S2 also having the same power button problem. Most of the time I can't use my power button to turn on/off the screen (wake/sleep) and there's no menu for long tap as well. Luckily it does wake when i press the only physical Samsung center button.
What i have already tried: Factory Reset, disable Power Saving Mode, Spare Part+ (apps), Screen Off and Lock (apps), and all won't help.
Is there any current updates or patches to allow the power button to work as usual?
Thank you.
take it to the samsung technical centre
Thats if you still have warranty
archer88 said:
take it to the samsung technical centre
Click to expand...
Click to collapse
won't help because this is the 3rd phone replacement from the shop with the same problem. 100% Android software problem.

[Q] girlfriends volume wont turn up on her phone?

my girls volume wont turn on at all? anyone ever hear about this problem? it isn't rooted....
not sure if it will help, but try this: from the home screen, press the menu button, then choose settings>sound>volume, and check the settings for the various volumes, i.e incoming call, media, system, etc. when my phone was stock like hers, sometimes one or more of those volumes got pushed down to 0 for some reason... it was annoying, and it seemed to happen especially to my notifications volume every time i rebooted the phone! hope that helps
I'm having the exact same issue
Hey everyone. So I bought a sidekick 4g on craigslist the other day. I checked it out and thought everything was okay, but I was wrong. So far no response from the jerk who sold it to me without telling me about this problem.
The phones volume up key doesn't work 90% of the time. If I reboot the phone or leave it off for a while, the volume up key will work for a few minutes and then stop again. The funny thing is the volume up key works when I want to reboot (holding vol.up + vol.down and power button at the same time).
So is there any fix for this? Will rooting it and loading a rom fix it? Also I am new to all of this, is it even possible to root and load generginger 2.0 with a broke volume up button? The phones firmware is all up to date.
Thanks for any info and help everyone.
i'd suggest using this thread: http://forum.xda-developers.com/showthread.php?t=1275116
root the phone, and then go back to stock with the heimdall and see if that fixes the problem. and if it does then you should try rooting it again and install one of the Custom ROMs because the stock OS on this phone is garbage out of the box.
but i'm no expert either, it just seems strange that only when its been on for a bit that it stops working. that it works when you boot it seems to suggest that its a software issue? somebody help me out here guys lol

[Q] NS4G - power button stuck

Last night I noticed that pressing the power button on my phone no longer did anything. Thinking that maybe the phone had somehow become frozen, I pulled the battery and put it back in. Much to my surprise, the phone came on all by itself without me having to do anything. It seems that somehow the power button got stuck in the "pushed" position even though I can still push it like normal.
I have managed to work around the issues for now thanks to some features of Cyanogenmod (I can now wake the phone up using the volume keys and lock by tapping a widget in the notification area), but I'm wondering what caused this and if it's something that could be easily fixed.
Has anyone else ever experienced something like this or does anyone know how I could go about fixing the issue?
Oldiesmann said:
Last night I noticed that pressing the power button on my phone no longer did anything. Thinking that maybe the phone had somehow become frozen, I pulled the battery and put it back in. Much to my surprise, the phone came on all by itself without me having to do anything. It seems that somehow the power button got stuck in the "pushed" position even though I can still push it like normal.
I have managed to work around the issues for now thanks to some features of Cyanogenmod (I can now wake the phone up using the volume keys and lock by tapping a widget in the notification area), but I'm wondering what caused this and if it's something that could be easily fixed.
Has anyone else ever experienced something like this or does anyone know how I could go about fixing the issue?
Click to expand...
Click to collapse
Hi, take a look here:
http://forum.xda-developers.com/showthread.php?t=1524858&highlight=power+button
and here
http://forum.xda-developers.com/showthread.php?t=1504501&highlight=power+button
Anyway, someone solve this problem opening the nexus s and manually cleaning the power button. Here a guide to open your device if you want to try:
http://www.ifixit.com/Teardown/Nexus+S+Teardown/4365/1
Opening my ns and cleaning it did the trick for me. Worth a try, your warranty is void now anyway
Sent from my Nexus S using xda app-developers app
Thanks for the info. I'll give it a shot when I get a chance.

[Q] power button broken

Hey, the power button broke on my nexus s, YYAAYY
the problem is, that it is not just broken, but it is also sorta stuck... what i mean by that is, instead of not being able to press the power button, it is constantly pressed. this means i can not:
1. turn off the phone
2. use the bootloader, which is actually a huge problem, as i havent rooted the thing yet (or rather restored everything to factory a while ago)
3. lock the screen.
what now? i openend it and i cant figure out what is wrong, the button seems just fine on the motherboard, i can even press it, the internal contact seems to be stuck or something. is there any way i can fix that? can i disable the button on a hardware level entirely? or am i missing some way to make it work here?
please help
exquyre said:
Hey, the power button broke on my nexus s, YYAAYY
the problem is, that it is not just broken, but it is also sorta stuck... what i mean by that is, instead of not being able to press the power button, it is constantly pressed. this means i can not:
1. turn off the phone
2. use the bootloader, which is actually a huge problem, as i havent rooted the thing yet (or rather restored everything to factory a while ago)
3. lock the screen.
what now? i openend it and i cant figure out what is wrong, the button seems just fine on the motherboard, i can even press it, the internal contact seems to be stuck or something. is there any way i can fix that? can i disable the button on a hardware level entirely? or am i missing some way to make it work here?
please help
Click to expand...
Click to collapse
u need tools to do that, a hot airgun. Just pick up the solder that holds the button and button vl be in your hand so get the button replaced

Categories

Resources