[Q] Mac Odin/Heimdall - Verizon Samsung Galaxy S6

Looking for Odin or Heimdall so I can flash stock from my Mac. I tried Heimdall 1.4 but it did not recognize my phone. Does anyone have experience with Mac and flashing for Galaxy S6, with regards to what software to use?

oconnell84 said:
Looking for Odin or Heimdall so I can flash stock from my Mac. I tried Heimdall 1.4 but it did not recognize my phone. Does anyone have experience with Mac and flashing for Galaxy S6, with regards to what software to use?
Click to expand...
Click to collapse
I was trying to figure this out today as well. I came across jodin3, but the download was hosted on goo and the site was down so I wasn't able to try it out. I tried the Web based one as well but couldn't get the page to load...probably because of the Java 8 requirement.
https://jodin3.casual-dev.com/

Reverting back to Stock without ODIN ( MAC AND PC )
brholt6 said:
I was trying to figure this out today as well. I came across jodin3, but the download was hosted on goo and the site was down so I wasn't able to try it out. I tried the Web based one as well but couldn't get the page to load...probably because of the Java 8 requirement.
https://jodin3.casual-dev.com/
Click to expand...
Click to collapse
If you download SmartSwitch and connect your phone, Click on the menu and you will see a option for ( Emergency Software Recovery and Initialization ) Click that and then click on ( Software Update And Initialization ) This will take about 15min to complete. This will return you back to stock and remove root and all other things. It will also clear you Internal memory!!!!

Roland_K said:
If you download SmartSwitch and connect your phone, Click on the menu and you will see a option for ( Emergency Software Recovery and Initialization ) Click that and then click on ( Software Update And Initialization ) This will take about 15min to complete. This will return you back to stock and remove root and all other things. It will also clear you Internal memory!!!!
Click to expand...
Click to collapse
Could you give a little bit more info? I'm trying to do the same here. Is there a MAC component that needs to be installed on the computer?

Roland_K said:
If you download SmartSwitch and connect your phone, Click on the menu and you will see a option for ( Emergency Software Recovery and Initialization ) Click that and then click on ( Software Update And Initialization ) This will take about 15min to complete. This will return you back to stock and remove root and all other things. It will also clear you Internal memory!!!!
Click to expand...
Click to collapse
Will this work even if I unsuccessfully flash a rom? Last time I did I couldn't boot and could only enter download mode. I'm out in BFE western Kansas on a job so I don't want to be stuck without a working phone. Good to see you in the S6 forums! Did you move on from HTC or are you running both?

Instructions
brholt6 said:
Will this work even if I unsuccessfully flash a rom? Last time I did I couldn't boot and could only enter download mode. I'm out in BFE western Kansas on a job so I don't want to be stuck without a working phone. Good to see you in the S6 forums! Did you move on from HTC or are you running both?
Click to expand...
Click to collapse
Download SmartSwitch For ( MAC ) DOWNLOAD
Install it on your MAC
Open it and allow for it to connect to your Phone.
Do a BackUp of your devices
Now click on the Menu Button up in the top left hand corner next the the Apple Logo
Click on ( Emergency Software Recovery and Initialization )
Then click on ( Software Update And Initialization )
It will ask you to BackUp you device again, You can do it again if you like.
Click OK & READ THE DIRECTIONS!!!!
This will take about 20 to 30 Minutes depending on your internet speed.
DO NOT DISCONNECTED YOUR DEVICE DURING THE PROCESSOR!!!!!
Here Is the Link for ( PC ) DOWNLOAD
This will only work if your phone Screen is on and not in BootLoop. Might work in DOWNLOAD MODE if USB Debugging is on and your computer had been recognized.

Roland_K said:
Download SmartSwitch For ( MAC ) DOWNLOAD
Install it on your MAC
Open it and allow for it to connect to your Phone.
Do a BackUp of your devices
Now click on the Menu Button up in the top left hand corner next the the Apple Logo
Click on ( Emergency Software Recovery and Initialization )
Then click on ( Software Update And Initialization )
It will ask you to BackUp you device again, You can do it again if you like.
Click OK & READ THE DIRECTIONS!!!!
This will take about 20 to 30 Minutes depending on your internet speed.
DO NOT DISCONNECTED YOUR DEVICE DURING THE PROCESSOR!!!!!
Here Is the Link for ( PC ) DOWNLOAD
This will only work if your phone Screen is on and not in BootLoop. Might work in DOWNLOAD MODE if USB Debugging is on and your computer had been recognized.
Click to expand...
Click to collapse
I'll have to test this out. It would be nice to have this recovery option for Mac. Thanks for the post!

Can anyone atest to smartswitch working when soft bricked?

If you have USB Debugging mode ON and you have granted your computer access, you should be able to run Smart Switch Software Recovery if you boot in to Download Mode. Will test later when I am home.
Download Mode:
Volume Down + Power Button + Home Button (At the same time)
Recovery Mode:
Vol Up + Vol Down + Power Button
(At the same time)
Download Mode To Recovery Mode:
While in Download Mode Hold down ( Vol Down + Power Button )
(At the same time)
Exit Download Mode:
Power Button + Home Button
(At the same time)

Has anyone tried using Odin in VirtualBox on Windows 10? I'm getting it set up now but wasn't sure if it would work. I haven't tried the smart sync method because if that didn't work I'd be SOL.
Edit: I couldn't get this to work. I got Odin up and running but it wouldn't recognize my phone. Maybe going through bootcamp would work but I don't have a thumb drive with me. Also, I was able to boot in to download mode and Smart Switch (for Mac) would say it was connecting to the phone, but it wouldn't ever fully connect.

@Roland_K thank you for these instructions. I want to make sure this applies in my situation too...
- My phone is NOT bricked
- VZW S6 on OC3 - rooted today, FlashFire installed, no mods
I just want to update to OE2 and flash one of the clean ROMs.
Do I need to unroot first? Or can I follow your instructions down to T and be fine?
Thank you so much!!!!!
Roland_K said:
Download SmartSwitch For ( MAC ) DOWNLOAD
Install it on your MAC
Open it and allow for it to connect to your Phone.
Do a BackUp of your devices
Now click on the Menu Button up in the top left hand corner next the the Apple Logo
Click on ( Emergency Software Recovery and Initialization )
Then click on ( Software Update And Initialization )
It will ask you to BackUp you device again, You can do it again if you like.
Click OK & READ THE DIRECTIONS!!!!
This will take about 20 to 30 Minutes depending on your internet speed.
DO NOT DISCONNECTED YOUR DEVICE DURING THE PROCESSOR!!!!!
Here Is the Link for ( PC ) DOWNLOAD
This will only work if your phone Screen is on and not in BootLoop. Might work in DOWNLOAD MODE if USB Debugging is on and your computer had been recognized.
Click to expand...
Click to collapse

Related

[Q]Galaxy Fit brick

Hello!
I got a small problem with a galaxy fit. It does power on and it shows a computer and a phone with an exclamation mark between them.
The only thing that is accessible is the download mode.
Now in download mode odin gets stuck at "mibib download.." and it just keeps counting the time.
Does anyone have a clue about what to do to get the phone working again?
P.S.
This is my friends phone and i wasn't with him when the accident happened, but i understood that he might have tried cu flash something and Odin got stuck and he pulled the cable.
Thank you.
you must also come into recovery ...
if you cant flash it with odin 4.38 ... (in download-mode)
Than you make an data wipe/reset and wipe the dalvik...
And the phone is not bricked
n00b.androidDEV said:
you must also come into recovery ...
Click to expand...
Click to collapse
Can you please be more specific about this procedure? I'm not familiar with it.
Also a link to a tutorial would be greatly appreciated.
Thank you.
Can you come in recovery?
Press Power On + Home Button at once
If i press home+power it shows the same logo as just trying to switch on. I cannot use the recovery menu.
viperasp said:
If i press home+power it shows the same logo as just trying to switch on. I cannot use the recovery menu.
Click to expand...
Click to collapse
Try reinstalling the system. Press 3 buttons together. Power On + Home + volume Down. Prepare all the in Odin, connect phone with your PC, and Start in Odin.
cant we use odin_multi_downloader_v4.42 , beni.ops . why it must be odin 4.38 . are there any diferences
have you used odin 1.7 or 1.8?
galaxy tab versions!!
bcoz in my galaxy tab it comes when
odin fails!
but i can solve that problem by flashing
(dbdata.tar)file!!! only in mySAMGUNG
GALAXY TAB 7 ,not tried 4 fit yet ,but
with galaxy TAB it works,
you just have to do is put(dbdata.tar)in
the first of the Odin blank row that is
(PDA)and connect Tab to pc and press
"Start"
only works for galaxy TAB ,dont knw
abt fit!!!!
but 100% work for Tab
u can try this on fit ,i dont knw wat will happen!
it may work!!
djozaa said:
cant we use odin_multi_downloader_v4.42 , beni.ops . why it must be odin 4.38 . are there any diferences
Click to expand...
Click to collapse
I use Odin 4.38, and use Beni v1.0.ops. When on the phone display a yellow triangle to download I connect the phone to the computer and when the port is detected I click on Start and wait until it's over, and that to me takes about 5 minutes. When it is almost square in the port is blue.
may b u can use unisoft unbrick....just google it out..
i wil provide u wid some more info if u can just tel me if u can enter in recovery mode nd by the way wat recovery it is...the stock i mean samsung 1's or the clockworkmod recovery.....
I too faced similar problm..did u flash in windows 7??coz i had the same prob on win 7 then flashed in xp n worked..u must be admin inorder to use odin hope it helps u
vijayanandssj4 said:
I too faced similar problm..did u flash in windows 7??coz i had the same prob on win 7 then flashed in xp n worked..u must be admin inorder to use odin hope it helps u
Click to expand...
Click to collapse
To Odin work should be installed by the driver when the phone is connected to the computer. If you can not install the driver, Odin can not work, not port may be to open.
ZmisiS said:
To Odin work should be installed by the driver when the phone is connected to the computer. If you can not install the driver, Odin can not work, not port may be to open.
Click to expand...
Click to collapse
Hey bro by drivers do u mean samsung drivers???if yes then i do have samsung drivers in win 7 but still doesnt flash..win7 sucks it has more administration rights problems
viperasp said:
Hello!
I got a small problem with a galaxy fit. It does power on and it shows a computer and a phone with an exclamation mark between them.
The only thing that is accessible is the download mode.
Now in download mode odin gets stuck at "mibib download.." and it just keeps counting the time.
Does anyone have a clue about what to do to get the phone working again?
P.S.
This is my friends phone and i wasn't with him when the accident happened, but i understood that he might have tried cu flash something and Odin got stuck and he pulled the cable.
Thank you.
Click to expand...
Click to collapse
if ur sure it wont work...it may be surely bricked ..l had bricked too..fortunately..my fone's warranty was active...i gave to the samsung centre....they changed my motherboard for free due to the warranty!
vijayanandssj4 said:
Hey bro by drivers do u mean samsung drivers???if yes then i do have samsung drivers in win 7 but still doesnt flash..win7 sucks it has more administration rights problems
Click to expand...
Click to collapse
I have Windows 7 x64 and it is OK. On Odin you need go as Administrator. Drivers are installed automatically for me when I connect the phone and computer.
ZmisiS said:
I have Windows 7 x64 and it is OK. On Odin you need go as Administrator. Drivers are installed automatically for me when I connect the phone and computer.
Click to expand...
Click to collapse
Hmm i too have an admin account on win7 x64 still odin doesn't work for me...
vijayanandssj4 said:
Hmm i too have an admin account on win7 x64 still odin doesn't work for me...
Click to expand...
Click to collapse
Right click on Odin ...
Turn off your cell phone, press 3 buttons at once: Menu + Power + Down Sound, wait until the phone display a yellow triangle appears to download, when it appears, connect your phone to your computer and you should get this:
Fit goes to bootloop after flashing stock firmware
ZmisiS said:
Try reinstalling the system. Press 3 buttons together. Power On + Home + volume Down. Prepare all the in Odin, connect phone with your PC, and Start in Odin.
Click to expand...
Click to collapse
I flashed stock firmware using odin and it successfully got completed but after rebooting it gets stuck on samsung logo and goes into bootloop. Can u help me to recover my fit....
vijayf5 said:
I flashed stock firmware using odin and it successfully got completed but after rebooting it gets stuck on samsung logo and goes into bootloop. Can u help me to recover my fit....
Click to expand...
Click to collapse
goto recovery and wipe data & cache
remove bettery and switch it on again..
vijayf5 said:
I flashed stock firmware using odin and it successfully got completed but after rebooting it gets stuck on samsung logo and goes into bootloop. Can u help me to recover my fit....
Click to expand...
Click to collapse
Go in Recovery and it is enough to do the wipe data / recovery and reboot.
In Recovery you can go in a way that together press Home and Power buttons.

Problem during the root of Samsung Galaxy S2

Hi everyone,
I tried to root my Samsung Galaxy following the guide from xda developers (http://forum.xda-developers.com/showthread.php?t=1056334).
I forgot to enable the USB debugging mode on the device (Settings -> Applications -> Development -> USB debugging)
I started ODIN, then my device rebooted. I started SuperOneClick and I received a message saying "device not found".
Then I went to check the guide, and I saw that I forgot to enable the USB debugging mode on the device (Settings -> Applications -> Development -> USB debugging).
Can anyone help me to fix this?
I'm from Portugal. If I wrote anything wrong sorry for my mistake and for any inconvenience.
Thank you for any help.
Not sure if you're just having problems with Odin recognizing your phone or not but the basics are to ensure you have the phones drivers installed and enable usb debugging. Afterwards you make sure your phone gets recognized fully from your computer once plugging it in. If so you start Odin AND THEN plug in your phone with the directions for getting to download mode (removing battery and holding volume button etc) and in Odin it should show a connection on a com port tile. Then you load up your files and send them. If anything I am sure you just may have a problem by not being in download mode?
Sent from my SGH-T989 using xda premium
Do you have the latest drivers? Have you killed all KIES apps?
hompsar said:
Not sure if you're just having problems with Odin recognizing your phone or not but the basics are to ensure you have the phones drivers installed and enable usb debugging. Afterwards you make sure your phone gets recognized fully from your computer once plugging it in. If so you start Odin AND THEN plug in your phone with the directions for getting to download mode (removing battery and holding volume button etc) and in Odin it should show a connection on a com port tile. Then you load up your files and send them. If anything I am sure you just may have a problem by not being in download mode?
Sent from my SGH-T989 using xda premium
Click to expand...
Click to collapse
The only thing that my device do it's when I press power on it appears the image of samsung galaxy and the yellow triangle above. It doesn't do anything more. it is blocked on that image. I can ear in my computer the sound of some device plugged to the usb port, but don't detect any device. It only makes the sound of some device that was plugged to the usb port.
But I can put my device in download mode. What files I have to send? but I don't know what files I should send to the device. Can you please help me?
What I have to do in odin?
thanks
heretix said:
Do you have the latest drivers? Have you killed all KIES apps?
Click to expand...
Click to collapse
I have the latest drivers from my cell phone operator. I can only have access to Kies on my pc (but now, kies doesn't recognize any device plugged to the pc), my phone don't let me gain access to the menu and to any application.
Get into download mode and go into keis and start a firmware upgrade and initialization. (you will need model number and serial number behind the battery) and go through the process it tells u to. Then you will be back to stock, then try to root from there the proper way.
Sent from my SAMSUNG-SGH-I777 using xda app-developers app
utahst8 said:
Get into download mode and go into keis and start a firmware upgrade and initialization. (you will need model number and serial number behind the battery) and go through the process it tells u to. Then you will be back to stock, then try to root from there the proper way.
Sent from my SAMSUNG-SGH-I777 using xda app-developers app
Click to expand...
Click to collapse
I did what you said, I get into download mode, then pressed the volume up key to continue. I started KIES on PC and it doesn't recognize any phone plugged in USB port. I tried to start the firmware upgrade and initialization and then KIES show me the message: "GALAXY SII (GT-I9100) does not support initialization".
Any suggestion o fix this?
Thanks for the help.
mrmister2010 said:
I did what you said, I get into download mode, then pressed the volume up key to continue. I started KIES on PC and it doesn't recognize any phone plugged in USB port. I tried to start the firmware upgrade and initialization and then KIES show me the message: "GALAXY SII (GT-I9100) does not support initialization".
Any suggestion o fix this?
Thanks for the help.
Click to expand...
Click to collapse
What carrier are you going through? Some of the carriers the phones wont do this in keis
utahst8 said:
What carrier are you going through? Some of the carriers the phones wont do this in keis
Click to expand...
Click to collapse
I don't know what you mean with "carrier".
Is there any chance to copy a tar file with ODIN that let me gain access to the cell phone?
beacuse this happened when I use Odin to copy the XWKDD_insecure.tar to the phone.
thnaks for the help.
mrmister2010 said:
The only thing that my device do it's when I press power on it appears the image of samsung galaxy and the yellow triangle above. It doesn't do anything more. it is blocked on that image. I can ear in my computer the sound of some device plugged to the usb port, but don't detect any device. It only makes the sound of some device that was plugged to the usb port.
But I can put my device in download mode. What files I have to send? but I don't know what files I should send to the device. Can you please help me?
What I have to do in odin?
thanks
Click to expand...
Click to collapse
You could find a stock ROM first (depends on where you bought your phone / country, provider) and flash through Odin. Unplug your phone from your PC > task manager > kill all KIES apps > turn on your phone into download mode > open ODIN > connect phone to PC
Then ODIN should show your phone is connected with a yellow box, depending on what ROM you downloaded you put the needed file in the PDA box (file with the name such as I9100XWLP7_I9100XXLPS_I9100XENLP3_HOME.tar.md5), click START and wait until that box goes from yellow to green. Phone should reboot now. If it gets stuck, get into the recovery mode (Vol UP + home + power) and wipe everything.
+1
Sent from my SGH-T989 using xda premium
heretix said:
You could find a stock ROM first (depends on where you bought your phone / country, provider) and flash through Odin. Unplug your phone from your PC > task manager > kill all KIES apps > turn on your phone into download mode > open ODIN > connect phone to PC
Then ODIN should show your phone is connected with a yellow box, depending on what ROM you downloaded you put the needed file in the PDA box (file with the name such as I9100XWLP7_I9100XXLPS_I9100XENLP3_HOME.tar.md5), click START and wait until that box goes from yellow to green. Phone should reboot now. If it gets stuck, get into the recovery mode (Vol UP + home + power) and wipe everything.
Click to expand...
Click to collapse
Thanks a lot. Done and fixed. It's all ok now.
Thank you very much.
No problem mate, as long as it works.
Sent from my GT-I9000 using Tapatalk 2
Forgot to enable usb debugging while flashing, got s2 bricked
heretix said:
You could find a stock ROM first (depends on where you bought your phone / country, provider) and flash through Odin. Unplug your phone from your PC > task manager > kill all KIES apps > turn on your phone into download mode > open ODIN > connect phone to PC
Then ODIN should show your phone is connected with a yellow box, depending on what ROM you downloaded you put the needed file in the PDA box (file with the name such as I9100XWLP7_I9100XXLPS_I9100XENLP3_HOME.tar.md5), click START and wait until that box goes from yellow to green. Phone should reboot now. If it gets stuck, get into the recovery mode (Vol UP + home + power) and wipe everything.
Click to expand...
Click to collapse
Hi,
me too dug deep into the same situation, but when i followed the above step,it didnt get fixed only difference was my yellow triangle got disappeared but still bricked.i did factory reset and cache wipe , no help.
Phone Info:-
S2 - India
stock rom XWKE8 GingerBread
Forgot to enable USB Debugging( since got carried away with my concentration on fixing usb drivers with kies) while doing my first rooting.
i am able to goto download mode and recovery mode as well.
Please do provide me with suggestions..
Regards
Newbie
Galaxy GT-S5660 GIO break
newbie24 said:
Hi,
I have (had ) samsung galaxy gio, i tried to root it then install android 4.2.
1- I forgot to set "Debugging mode" on from the setting.
2- During upgrading from zip file from SD card, battery finished (I know I screwed it up, that day was terrible).
phone does not work. when i turn it on, i have got double boot logos "Galaxy Gio GT-S5660". i mean two startup logo alongside eachother on the top of screen in decreased size. and phone hang on this state. when i try (power + home button) i get normal recovery mode with android sign and alert sign in triangle.
of course any help will be appreciated.
Click to expand...
Click to collapse

[Completed] HELP me unbrick my GT-I9300

Hello xda members
I have an GT-I9300 device which stucks on TWRP Recovery (teamwin logo excatly) and flashes about after 4 or 5 seconds.
No twrp options , my pc doesnt react when i plug in my phone , only download mode available and an SD Card.
Can i unbrick my phone or not ?
Hello,
Yes, you can flash your stock firmware through Odin 3.10 and fix your device. Look in the thread linked below for instructions, if the download link for your stock firmware is dead then try going to Sammobile.com and search for your stock firmware using your model number GT-I9300, download it and then follow the instructions below.
http://forum.xda-developers.com/galaxy-s3/general/restore-to-stock-rom-galaxy-s3-i9300-t2187081
Good luck.
styno said:
Hi,
you can recover the GT-I9300 completely with Samsung's own Kies. It will ask for the serial number of the phone and will download all files needed and flash it for you.
You'll end up with a complete stock phone (but with latest modem )
Good luck!
Click to expand...
Click to collapse
Kies and Odin dont recognize my device
Any other suggestions?
Edixh said:
Kies and Odin dont recognize my device
Any other suggestions?
Click to expand...
Click to collapse
Have you verified that your drivers are installed correctly?
Post your issue in the forum I gave you the link to.
Droidriven said:
Have you verified that your drivers are installed correctly?
Post your issue in the forum I gave you the link to.
Click to expand...
Click to collapse
Yes bro i have installed them so many times and restarted PC but nothing happens when i plug in my device
styno said:
Just to be sure: you used kies3 - emergency recovery and got the phone into download mode?
Click to expand...
Click to collapse
Yes but kies and also kies3 doesnt start the process .
TDizzle329 said:
Are you putting the device into download mode?
Power the device off (pull the battery, then put the battery back in), then hold VOL DOWN + HOME KEY + POWER KEY
Once in download mode plug into your PC. Also make sure that you have the Samsung drivers installed. Check your device manager on your PC to make sure Windows is seeing the device.
Click to expand...
Click to collapse
I have done that but my pc doesnt even show any signs of my phone when i plug it in.
I looked at Device Manages also
Edixh said:
I have done that but my pc doesnt even show any signs of my phone when i plug it in.
I looked at Device Manages also
Click to expand...
Click to collapse
Try different USB ports, make sure you have the stock cable.

Screwed something up, HELP needed please

Howdy,
I've screwed up with installing a custom rom over another custom.
Now I'm getting an error:
Firmware upgrade encountered an issue. Please select recovery mode in kies & try again.
It's a tablet:
Samsung Galaxy Tab 2 10.1 (p5100)
In my computer im using windows 10 pro, and adb device is not regonized.
What I neeed to do to get pasted that error?
Thanks for the help!
There is nothing to worry.
It is easy to solve this.
Just download Odin in your pc.
Download the official firmware if your device here.
http://www.sammobile.com/firmwares/database/GT-P5100/
Now open Odin In pc
Connect your device to the pc .
Now in the app under PDA browse for the firmware you have downloaded and click start.
Wait till it says pass.
That's it you have successfully solved your problem.
Now it will take some time to boot.
In case you feel that you are in a bootloop just go to recovery and perform a factory reset .
Odin download http://odindownload.com/download/Odin3_v3.10.6.zip
HIT THANKS IF THIS HELPED YOU :good:
OOO thanks for the reply.
But I'm getting trouble to get into Download Mode, I mean I can't get in no matter what I do.
I've attacked a screen which I thing that Odin get's the device. Is this ok?
Thanks for the support!
_______
I've just flashed the TWRP recovery over the old one and know it works! YAY.... ODIN FTW
Zte blade l said:
There is nothing to worry.
It is easy to solve this.
Just download Odin in your pc.
Download the official firmware if your device here.
http://www.sammobile.com/firmwares/database/GT-P5100/
Now open Odin In pc
Connect your device to the pc .
Now in the app under PDA browse for the firmware you have downloaded and click start.
Wait till it says pass.
That's it you have successfully solved your problem.
Now it will take some time to boot.
In case you feel that you are in a bootloop just go to recovery and perform a factory reset .
Odin download http://odindownload.com/download/Odin3_v3.10.6.zip
HIT THANKS IF THIS HELPED YOU :good:
Click to expand...
Click to collapse
Greetings;
I don't know if you already entered Download Mode...
Most problems accessing Recovery and Download Modes are due to having the USB Cable connected.
Remove the cable; press the key combination; and it will boot.
(Except if there's some incompatible ROM flashed by mistake).
After that plug the USB Cable again (if your USB Drivers have also installed for Download Mode) Odin will recognize it (like shown in your Screen Shot).
REMEMBER:
While Flashing do NOT Remove USB Cable, untill Odin Displays "Pass" message.
Further issues: Let us know. We're would be Glad to help.

Is it fixable? Bricked S6 won't boot or accept ROM flashes.

Previously, I've talked about how I bricked my G920T by using an apk to try to root my phone.
Then I tried to do a factory reset with the stock recovery but it wouldn't even go into the stock recovery. So I flashed TWRP and wiped the whole phone including the system partition.
Then I tried to flash a stock 6.0.1 firmware to the phone but doing so did not improve the situation as my phone still won't boot. Even worse, when I power my phone, all I see is the blue LED indicator, no Samsung logo, nothing.
Then I tried to flash a custom ROM like XtreStoLite but that didn't fix anything either.
When I use TWRP or the stock recovery, the error "failed to mount /efs (invalid argument)" comes up on the log. I tried using the ADB method to fix it but my phone would not get recognized by ADB probably because USB debugging isn't on by default.
I cannot shut down the phone without having it charged to a power source then holding down PWR+DOWN VOLUME+HOME until the screen shuts off.
When I enter download mode, I don't see the warning screen, I enter the download mode directly.
It will warm you when you enter download. Or use TWRP and reboot into Download.Once in download flash the ROM using Odin. Get the latest one from SamFirm.
P.S. Next time root using CF Auto Root
yasteellutch said:
It will warm you when you enter download. Or use TWRP and reboot into Download.Once in download flash the ROM using Odin. Get the latest one from SamFirm.
P.S. Next time root using CF Auto Root
Click to expand...
Click to collapse
It doesn't warn me when I enter download mode, that's one of the problems.
I tried flashing the official ROM using ODIN, it still won't boot because of the efs error.
1) Download the latest SmartSwitch
2) Click on more -> Emergency software recovery and initialization
3) Go into Device initialization, enter your model name, search for it and proceed as advised by the assistant
That should fix everything, otherwise:
1) Download the latest official firmware for your model, the 4-File (or 3-File) Version
2) Use latest ODIN, check repartition in options
3) Select all the files and flash it
If EFS or DRK is corrupted, flashing roms, custom or not won`t help, it can be fixed via repair box maybe (Octoplus/Z3X)
Try to flash CF auto root for your model, if it still won`t boot, then find someone with a box to try to help you remotely or not.
But Smart Switch emergency initialization with phone sn would be the first thing I would try.
Orginator said:
1) Download the latest SmartSwitch
2) Click on more -> Emergency software recovery and initialization
3) Go into Device initialization, enter your model name, search for it and proceed as advised by the assistant
That should fix everything, otherwise:
1) Download the latest official firmware for your model, the 4-File (or 3-File) Version
2) Use latest ODIN, check repartition in options
3) Select all the files and flash it
Click to expand...
Click to collapse
Which mode should I be in when using SmartSwitch? No devices are shown when I have it plugged in during the bootup, and is so too in download mode but shows a not supported message.
brenner650 said:
If EFS or DRK is corrupted, flashing roms, custom or not won`t help, it can be fixed via repair box maybe (Octoplus/Z3X)
Try to flash CF auto root for your model, if it still won`t boot, then find someone with a box to try to help you remotely or not.
But Smart Switch emergency initialization with phone sn would be the first thing I would try.
Click to expand...
Click to collapse
How can someone with a box help me remotely?
zheyizhu said:
Which mode should I be in when using SmartSwitch? No devices are shown when I have it plugged in during the bootup, and is so too in download mode but shows a not supported message.
Click to expand...
Click to collapse
Download mode offcourse. Nevermind the not supported message.
Follow instructions from link below, I made it for such occasions:
http://forum.xda-developers.com/galaxy-s6/help/how-to-smart-switch-emergency-t3383448
zheyizhu said:
How can someone with a box help me remotely?
Click to expand...
Click to collapse
Well if you know someone who have a box, it doesn`t have to be remotely.
If not, it is possible to fix it remotely, with help of usb hub (FlexiHub or similar), tunneling (TeamViewer or similar) and box software (you connect phone to your computer, the other guy connects box to his computer, both of you are connected through a gateway to a wonderfull thing called internet, and everybody is happy ) .
Same as on site, just with few more things in between the phone, and the box.
brenner650 said:
Download mode offcourse. Nevermind the not supported message.
Follow instructions from link below, I made it for such occasions:
http://forum.xda-developers.com/galaxy-s6/help/how-to-smart-switch-emergency-t3383448
Well if you know someone who have a box, it doesn`t have to be remotely.
If not, it is possible to fix it remotely, with help of usb hub (FlexiHub or similar), tunneling (TeamViewer or similar) and box software (you connect phone to your computer, the other guy connects box to his computer, both of you are connected through a gateway to a wonderfull thing called internet, and everybody is happy ) .
Same as on site, just with few more things in between the phone, and the box.
Click to expand...
Click to collapse
The S/N sticker on the back of the phone is long gone, is there any other way I can find it besides from going into settings because I can't do that?
EDIT: I am able to borrow a friend's serial and got the firmware installed.
The Samsung boot logo is back now, however, the device still won't boot. The efs error is still there but the download mode warning sign came back.
EDIT #2: Okay, I flashed TWRP now and ADB is working once again. Can I utilize this to fix the efs error?

Categories

Resources