I live in a place where 4G is available and also travel to places where there is only 3G. So i just dont know when i am on 3G and 4G because of roaming symbol in my signal cluster.Is there a way to get rid of the symbol ? Using 11s ,rooted.
syedhmed said:
I live in a place where 4G is available and also travel to places where there is only 3G. So i just dont know when i am on 3G and 4G because of roaming symbol in my signal cluster.Is there a way to get rid of the symbol ? Using 11s ,rooted.
Click to expand...
Click to collapse
Which carrier and place? I have seen this happen a lot on Vodafone in Bangalore.
Related
ive noticed that i get a 4g and a 2g icon but wheres the 3g icon? has anyone seened it?
Travling through the middle of nowhere over the last 3 days I've seen, no signal, G, 2G, 3G, & 4G. It's there.
I also have not seen the 3G icon. I drive through the city and would think when I get out if 4G I would at least still be in a 3G area. Wonder if something may be wrong....
Sent from my T-Mobile G2X using XDA app.
Cyberdan3 said:
I also have not seen the 3G icon. I drive through the city and would think when I get out if 4G I would at least still be in a 3G area. Wonder if something may be wrong....
Sent from my T-Mobile G2X using XDA app.
Click to expand...
Click to collapse
Same here but this is the first 4G device I have had and I know for a fact most of my city is covered by 4G. What is also weird is that in areas where I would have 1 or 2 bars with my Vibrant, it is telling me I have full bars worth of 4G with the G2X.
its there in the framwork i checked..
Im just wondering why it doesnt display 3G when its on UMTS... it sticks to 4G all the time...
very strange in the instruction manual it also shows 3g icon!
Rmoved
Sent from space
death1246 said:
its there in the framwork i checked..
Im just wondering why it doesnt display 3G when its on UMTS... it sticks to 4G all the time...
Click to expand...
Click to collapse
A lot of this has to do with the fact that T-Mobile's 3G towers == their 4G towers so if you're in an area where all of their towers have been upgraded to HSPA+ you will NEVER show 3G because you're always on a 4G tower. The only time you will show a 3G signal is if you're in an older area where they have pre-HSPA+ upgradeable towers. This is how T-mobile can say they have the biggest 4G network because almost all of their old HSPA/3G equipment has been turned into 4G equipment via software upgrades.
I have had my g2x for about 5 days and all I ever see is 4G or E never 3g. I have been checking in the settings/about phone/status and even when the phone is showing 3-4 bars of 4G it is still on umts. In the exact same location and within a minute or so when checking it with my Vibrant I will have 3 bars of H or 3G and in status it shows as hspda or hspda+. What is that about? I have checked this out at least 6 to 7 times a day and it is always the same only umts on the G2X and Hspda or Hspda+ on the Vibrant. I called CS and they wanted to send out another G2X I reluctantly said yes. I do really like this phone and will try to be patient but the device I have now has multiple issues. I am going to take the stance that this is an isolated case and the new one will be golden!!!
brentil said:
A lot of this has to do with the fact that T-Mobile's 3G towers == their 4G towers so if you're in an area where all of their towers have been upgraded to HSPA+ you will NEVER show 3G because you're always on a 4G tower. The only time you will show a 3G signal is if you're in an older area where they have pre-HSPA+ upgradeable towers. This is how T-mobile can say they have the biggest 4G network because almost all of their old HSPA/3G equipment has been turned into 4G equipment via software upgrades.
Click to expand...
Click to collapse
This is true. There's pretty much no need for a '3G' icon. Though, technically, it's debatable whether or not T-Mo's (or any other carriers) offerings right now are actually '4G' (according to the standards committees that define those things), but that's a different argument
tl;dr: T-Mo's 3G and 4G operate on pretty much the same technology, so if you're in an area where there was 3G, you'll probably have 4G. It doesn't need to switch back and forth or be toggled like the other solutions (looking at you Wi-Max)
Gentlemen,
I live in Chile and use the 3G network, cell phone in the U.S. and buy it when I choose the network I can only choose to 4G and 2G know how to enable 3G?
jastiden said:
Gentlemen,
I live in Chile and use the 3G network, cell phone in the U.S. and buy it when I choose the network I can only choose to 4G and 2G know how to enable 3G?
Click to expand...
Click to collapse
So you don't want 4g?
Sent from my Calculator with Android.
jose makalolot said:
So you don't want 4g?
Sent from my Calculator with Android.
Click to expand...
Click to collapse
Because in Chile, while not using the 4G.
Currently this only works on 3G
The long and short of it: The G2X has a bug in the stock ROM that does NOT display 3G at all. So when it's showing 4G, its actually running either 3G or 4G. There is no icon for 3G at all.
I could be wrong and 3G could be tied to the 2G icon, but I've seen 3G speeds far more often when the phone is displaying 4G than I have when its displaying 2G. No one has been able to verify this for me. Obviously if chile doesn't have a 4G Market there is no way to "force" 4G speeds.
jastiden said:
Because in Chile, while not using the 4G.
Currently this only works on 3G
Click to expand...
Click to collapse
On the stock G2x I do not believe you will ever see the 3G symbol. Tmobile 4G signal is just a very fast 3G. They call it 4G. You will only see 2G or 4G on the taskbar.
jastiden said:
Gentlemen,
I live in Chile and use the 3G network, cell phone in the U.S. and buy it when I choose the network I can only choose to 4G and 2G know how to enable 3G?
Click to expand...
Click to collapse
It's OK, don't worry. Just use it
krekabl said:
It's OK, don't worry. Just use it
Click to expand...
Click to collapse
In network mode, there is only GSM and WCDMA.
The only that works is GMS.
when I use the data plan I get the icon 2G.
I think that actually is 2G, as the navigation goes very slow.
I never appeared on 4G, you can change the ROM?
thanks
The phone displays 3g as 4g. Why I don't know, maybe T-Mobile wanted everyone to think they were getting 4g all over the place when actually they weren't, but it DOES support 3g. Your phone will SAY it's running 4g, but it probably won't be. Run a speed test if you want to see for yourself.
jastiden said:
In network mode, there is only GSM and WCDMA.
The only that works is GMS.
when I use the data plan I get the icon 2G.
I think that actually is 2G, as the navigation goes very slow.
I never appeared on 4G, you can change the ROM?
thanks
Click to expand...
Click to collapse
So, let me see if I am reading this correctly. When in Chile, you can only connect to GSM which makes sense. So you never see the 4G symbol? You only see the 2G symbol?
If this is the case, have you done a speedtest to see what kind of data speeds you are really getting?
Andrew
aowendoff said:
So, let me see if I am reading this correctly. When in Chile, you can only connect to GSM which makes sense. So you never see the 4G symbol? You only see the 2G symbol?
If this is the case, have you done a speedtest to see what kind of data speeds you are really getting?
Andrew
Click to expand...
Click to collapse
Only works on 2G Chile.
The network operator ENTEL works with 1900, some pages say that the cell blocks this signal with other operators.
When I enter somewhere to watch tv online, I get that I need a 3G or WIFI connection
Hi so I was under the impression that my skyrocket didn't have a 3G ability or HSPA+ ability and only either 4G or 2G edge because when I used stock GB when I wasn't in 4G area it would go to the painfully slow edge.but after flashing a radio and CM9 I suddenly DONT get 4G and only 3G and H? What happened and how?
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
As for my experience I only get the following when I'm in an area that has it:
3G = HSPA
H = HSPA+
4G = LTE
Thats just based on my experience, right now I'm in an area with LTE and it comes up as 4G. Whenever I go back home down south and theres not LTE coverage I get 3G/H signals.
UZ7 said:
As for my experience I only get the following when I'm in an area that has it:
3G = HSPA
H = HSPA+
4G = LTE
Thats just based on my experience, right now I'm in an area with LTE and it comes up as 4G. Whenever I go back home down south and theres not LTE coverage I get 3G/H signals.
Click to expand...
Click to collapse
Actually in some ROMs that doesn't not show the right signal code. I always got the 4G in the screen even thou I am leaving in a country where theres no 4G support yet. I Know that the max connection I will get is the HSPA+
filipeangelo said:
Actually in some ROMs that doesn't not show the right signal code. I always got the 4G in the screen even thou I am leaving in a country where theres no 4G support yet. I Know that the max connection I will get is the HSPA+
Click to expand...
Click to collapse
This is using CM9?
ICS Roms usually show 3G/4G/4GLTE of course some themes can also change this.
filipeangelo said:
Actually in some ROMs that doesn't not show the right signal code. I always got the 4G in the screen even thou I am leaving in a country where theres no 4G support yet. I Know that the max connection I will get is the HSPA+
Click to expand...
Click to collapse
in a Samsung/AT&T based ROM, HSPA+ is shown as 4G, and real 4G has a tiny "LTE" under the 4G. This is a marketing gimmick recently started by AT&T.
I've seen my CM9 cycle through everything (E, G, 3G, H, 4G).
I don't live in a 4G area but visited one once. 3G and G usually don't work (for me), it shows 3G briefly when downgrading from H to E, G usually appears when I lose E, and then internet access completely.
E = EDGE (usually slower than 14.4k AOL from 15 years ago)
G = GPRS
On cm9 I'm in lte area with a 4g icon and getting 30+mbps down. This is certainly lte speed whether the icon denotes it or not. As stated above, the icon sets for internet speed / capability will vary rom to rom
--------------------------------------------
Sent from my Skyrocket i727 running CM9
For a one stop shop are Vincom's threads
Everything Root: http://forum.xda-developers.com/showthread.php?t=1773659
Returning to Stock: http://forum.xda-developers.com/showthread.php?t=1652398
hello all ..
I have a question.
I have the i727 phone with Cyanogen and Rooted. 4g icon does not appear in the notification bar, the connection works flawlessly, appearing H, H +, 3G but not 4G icon. What does that mean? before when I was working the STOCK ROM 100% sure the 4G, also tell them that in my country there's Connect 4G. but I'm not sure what type of connection that handles the phone. I downloaded this: << radio att-I727-UCMC1-no-csc-no-ril-cwm >> and I've installed, but still the same. I've also changed the APN, choosing the type of APN I select LTE but in doing so cut the signal. (apparently the phone is not supported)
Details:
Before: ATT & T STOCK JB 4.1.2 Rooted
Now: cm-10.1-20130607-NIGHTLY-SuperSU skyrocket + Root file-0.93-Busybox-1.20.2
Is there a solution?
Excuse my writing, I did it with the help of google translator but stepping reviewing the words to match the text well.
from Paraguay
Thank you!
Fer83 said:
4g icon does not appear in the notification bar, the connection works flawlessly, appearing H, H +, 3G but not 4G icon. What does that mean? before when I was working the STOCK ROM 100% sure the 4G, also tell them that in my country there's Connect 4G.
Click to expand...
Click to collapse
The stock AT&T ROM shows 4G for HSPA/+ but 4GLTE when there's LTE available. Cyanogenmod reports the actual data connection. It shows H/H+ for HSPA/+ and 4G for LTE. That's probably the confusion.
mrfeuss said:
The stock AT&T ROM shows 4G for HSPA/+ but 4GLTE when there's LTE available. Cyanogenmod reports the actual data connection. It shows H/H+ for HSPA/+ and 4G for LTE. That's probably the confusion.
Click to expand...
Click to collapse
far as I understand, ATT&T has a fault, shows 4G icon when in fact that is not a Connection Connect 4G. I mean, I understand that: 4G is not the same for H+ because H+ is actually 3.5G. it? is this correct?
Fer83 said:
far as I understand, ATT&T has a fault, shows 4G icon when in fact that is not a Connection Connect 4G. I mean, I understand that: 4G is not the same for H+ because H+ is actually 3.5G. it? is this correct?
Click to expand...
Click to collapse
Correct; AT&T shows 4G even when it is only actually 3.5G. You were probably only getting H+ all along, but AT&T's software misrepresents your connection.
mrfeuss said:
Correct; AT&T shows 4G even when it is only actually 3.5G. You were probably only getting H+ all along, but AT&T's software misrepresents your connection.
Click to expand...
Click to collapse
finally! I get it now! ... thank you very much! it is unfortunate that these errors come from the factory that exist only to confuse people.
10 minutes ago, I called my local operator, and said that the 4G or LTE service is not enabled yet in my country. (Just right through usb modem for LTE notebook works here, but not for mobile phones) so which I now understand that 4G phone on the screen showed when it was actually connected to a 3.5 or H + that would be the same thing ...
Sorry if this is a silly question but can anyone tell me what the phone icon with the small 4g means?
Obviously the 4g on the right next to my phone reception icon I understand but not sure why I have an extra 4g with a phone icon as well?
I worked it out!
It's the 4g calling symbol (so phone uses 4g to make calls instead of the 2g network)
I also just turned on WiFi calling which is available on EE with this phone, and the small 4g symbol has turned into a WiFi symbol. Finally good signal everywhere in my house!