Please I have a MOTOROLA DROID RAZR MAXX HD with kk Bootloader unlocked n rooted, stock 4.4.2 ROM and system version 183.46.15.XT926.Verizon.en.US. Whenever I install any kinda custom ROM (cm11&12, Liquid smooth kk n lp, Resurrect lp) it installs successfully but when it reboots after the flashing process, it gets stuck on the boot screen after the M logo. This happens to all the custom ROMs I have ever flashed. Please what am I not getting right here? Although it came with Mokee ROM when I bought it and I changed it to cm12 which worked well until I changed it back to stock kk and when I later wanted to return to the cm12 that was when the problem started. Pls help me. I use TWRP v2.6 recovery. Thanx in advance...
1. Flash the latest recovery, http://d-h.st/users/dhacker29/?fld_id=42955#files
2. Clean flash (know what this means before you attempt to install a new rom) the rom (CM 12.1, not 12, I presume) you would like to install from your SD card. http://www.cmxlog.com/12.1/xt926/
3. GAPPS can be found here: http://d-h.st/users/dhacker29/?fld_id=27426#files
I had to clean flash CM11 before flashing CM12 to get it up and running. Good luck.
Thanx very much. Pls do u mean I should flash cm11 first before upgrading to 12.1? I just downgraded my system version from .15 to .10 and I tried the ROMs, only unified cm11 SNAPSHOT build worked. Others only got stuck at the boot animation. Any further help pls?
Sent from my DROID RAZR HD using XDA Free mobile app
1. Revert back to stock KK entirely. Easiest way would be to download the RAZR HD Utility http://forum.xda-developers.com/showthread.php?t=2474393
2. Flash TWRP 2860. Then wipe everything except sd card. Reboot into recovery again.
3. Flash latest cm12.1 from sd card
Works for me.
Sent fra min DROID RAZR HD via Tapatalk
Thanx a lot. I eventually dirty flash the cm12.1 on the snapshot and it worked finally!!! Thanx so much for your help everytime:thumbup::thumbup:
Sent from my DROID RAZR HD using XDA Free mobile app
Related
Hi
Just moved onto the Moto G from a couple of Huawei devices, G300 then Y300... (bye bye Modaco!) - So I'm pretty used to flashig, wiping etc using TWRP and CWM...
Anyhow, got the Moto G (XT1033), booloader unlocked, done a full restore to clean 4.2 and let it update to 4.4 fine, no problems.
Installed the latest CWM, got root, all fine... again, no problems...
But EVERY rom I try - slim, CM11, always install OK but on booting come up with phone process failures and I have to abandon.
I tried putting the 422 modem zip from the CM11 thread on, made no difference.
So I've rewiped back to stock and updated to 4.4.2, and flashed CWM, but still can't install a custom rom, getting the phone process error on startup.
Any suggestions?
Resolved myself! Revert to factory, install CWM and flash new roms without doing the ota to kitkat first.
TangerineTractor said:
Resolved myself! Revert to factory, install CWM and flash new roms without doing the ota to kitkat first.
Click to expand...
Click to collapse
So you installed CM11 from stock jelly bean??
Sent from my XT1032 using Tapatalk
xheon said:
So you installed CM11 from stock jelly bean??
Sent from my XT1032 using Tapatalk
Click to expand...
Click to collapse
Yes. Originally I let it run through the ota update, then installed CWM and tried to install various roms. All gave me a FC on outdoor process as soon as I booted.
tried again with TWRP, same thing. third time lucky, I restored to factory, let it boot but didn't do the ota update, installed CWM for 4.3 bootloader, and all has been find since, flashed several roms with no problems.
So you have a dual SIM version and you flashed a custom ROM which means only one SIM works now. Am I right? How is everything else, no issues with performance just because yours is a dual SIM variant?
I am perplexed:
I had previously installed many custom roms after updating to stock kitkat, including CM 11. However, I am not able instally cyanogenmod, AT ALL. I have gone through all the steps and all the recoveries, CWM & TWRP all versions. After the installation, the phone hangs on the boot logo, always.
Any clue would be appreciated. Thank you.
U sure u flashed/fastbooted the recommended kernel correctly and did a full wipe before installing the Rom?
Sent from my MT25i
I highly doubt you installed CM11 with the KitKat kernel installed. It won't work. The only way it would work is to FXZ back to JB and then install the previous version of CWM or TWRP.
Currently, there are no ROMs working with the KitKat versions of CM11 or TWRP, although dhacker is working on a new CM11 using the latest KK kernel for the RAZR HD phones and the developer for the Nexesque ROM is also working on an updated version that uses the KitKat kernel as well.
iBolski said:
I highly doubt you installed CM11 with the KitKat kernel installed. It won't work. The only way it would work is to FXZ back to JB and then install the previous version of CWM or TWRP.
Currently, there are no ROMs working with the KitKat versions of CM11 or TWRP, although dhacker is working on a new CM11 using the latest KK kernel for the RAZR HD phones and the developer for the Nexesque ROM is also working on an updated version that uses the KitKat kernel as well.
Click to expand...
Click to collapse
It was very strange situation. I ended up getting CM to work by using CWM 6.0.4.4. FMI (for my information), I need to use CWM 6.0.4.4 will be needed to install custom roms.
Thanks for the advice..
Hey folks,
i got a serious issue with my MotoG...
I tried to install/flash the GPe Rom (Android 4.4.2) here from xda and it fully worked. After the install process i received the OTA Update to Android 4.4.4 and installed it with the stock recovery. The result was a working up to date GPe rom where i deleted some system apps. I rebooted the phone and got stuck at the boot logo from Google with the unlocked symbol. A full wipe and reflash of the GPe Rom didn't fixed the problem. The phone sticks at the boot logo. After this i tried to reflash the Motorola Rom which didnt fixed it either....
My guess is that the OTA Update from GPe changed something which can't be fixed with older firmware flashes...!?
After a couple of hours of work i pushed via adb my CWM backup to the internal storage and restored it. My Moto booted and i was finally able to get it back to run the stockrom.
Then i saw something weird... The google logo with the unlock symbol stays and then the motorola boot logo appears and im not able to flash via fastboot other rom
Anyone experience similar or the same problem after restore from GPe 4.4.4 to lower Android version 4.4.2?
Thanks in advance for help and tipps
Flamey
many peopla have bricked phones right now
we have to wait for fastboot images of 444 or gpe 444
there are none yet
Yeah I'm luckily half bricked..
Can't flash stock..
Stuck with CM based ROMs..
I go either side and my phone dies..
Sent from my Moto G using XDA Premium 4 mobile app
http://forum.xda-developers.com/moto-g/general/howto-fix-stuck-boot-downgrading-t2808098
you can use that
lol sorry, you fixed the issue by your own guide, lol
After months of kicking myself for upgrading the software to 183.46.15 from 183.46.10, I finally achieved root thanks to the Hydrogen Peroxide root tool. After attempting many different Safestrap apks, I can't get any of them to work. I found a different recovery that will boot but it's basically a poor version of CWM recovery that doesn't allow for ROM slots. I know that the phone isn't the issue with lack of booting into Safestrap, it's the Safestrap apps that aren't compatible with my phone's current version. Since goo.im isn't up and I can't find a mirror, does anyone have a Safestrap apk that does work with a rooted 183.46.15?
Safestrap development stopped at JellyBean so nothing available for KitKat
Is there any recovery which isn't bootstrapped for .15 firmware .... I am using stock cwm but it won't unless i click reboot to recovery... So it's kinda risky to flash anything.... Also backup works but this bootstrap function is a problwm how can i get rid of that....
Sent from my DROID RAZR HD using XDA Free mobile app
That would be nice if there is safestrap for 183.46.15. But unfortunately its not there yet :crying:
this is safestrap source code, maybe someone has to take hands on it to make it work with the xt926
BTW, there is a "motorola-ghost" branch, as you know, Razr HD 3.4 kernel has "almost" the same Moto X kernel on 4.4.2.. nobody tried/searched for moto x safetrap and tested on the xt926?? maybe works, maybe not, try it at your own risk
Hi, please I would like to install a ROM in my moto g 4g xt1040. Once I tried to install slim kat and it worked good. I used twrp recovery with my device rooted to flash slimkat ROM... Then I notice that there was a ROM , cyanogen mod 12, and I tried to flash it as I did with slimkat. But I did something wrong because it booted normal, but the screen was flickering, and I had no signal. So I had to get back to stock ROM. I restore a stock rom i found here in moto g 4g section, then I installed twrp recovery again, but I could not root my phone anymore, there was a message ( root missing , do you wish to install root , or you will lose root. I tried to install cwm recovery , but it was the same. I think that the stock ROM I flashed to restore my phone is not okay. I can not flash any other ROM anymore.
Someone can help me please. Maybe I am doing something wrong. If someone need more information, just ask me.
Thanks a lot ( sorry for my english)( new a world of rooms)
Sent from my XT1040 using XDA Free mobile app
Hey, did you try re locking the bootloader and then unlocking it? And when you went to cm 12, why didn't you go back to slim kat?
Sent from my XT1064 using Tapatalk
Hello, I did not re locked the bootloader and locked it again. I have read something about update the bootloader, but I dont know exactly what to do first.
I didnt go back to slimkat because I have no signal for 3g ... When I set the APN a put all the necesary values for it, but when I put save it dessappered. The ROM didnt save the APN . that is why I tried CM 12, but my screen was flickering and I had no signal. The ROM didnt recognize me the sim card.
I tried to restore to stock my phone, and I installed stock brazil ROM( I am from Perú ), but after that I could not root my phone anymore.
I tried these roms for my moto g after installing stock brazil ROM with no root access.
CM12
SLIM 5.1
RESURECTION REMIX
PARANOID ANDROID.
all of them didnt boot or the screen flickered. In some cases there was a screen of " encryptation was not complete, restore to fábric and reboot" ( I think that is the message) .
If you can help me to install a ROM for my phone , or a stock ROM but with root.
Thank you
Sent from my XT1040 using XDA Free mobile app