Database Info

[Q] Can't connect to pc

Hello! I have a huge problem with my tf700t, Windows 8 won't recognise my device. In device manger it just says: Unknown device.
I'v tried to install the usb drivers manualy but it won't work... I just get "can not find driver software for this device" the error device mangere gives me is "Windows has stopped this device because it has reported problems. (Code 43)" I also tired to install asus sync....
I'm running newest frimware form asus (4.2.1)
Before i installet the 4.2.1 from asus I was running offical cm 10.1 and everything was working. Then i decided to go back stock because i was going to sell the device. I wiped everything including system to unroot the device. After that I downloaded the firmware for asus web page and flashed it. Everything was working except i couldn't connect it to a computer. So i decided to try to flash a older frimware (4.1.1) but I was not able to get into recovery.
I don't know what to do now. I can't install a new rom becouse i can't connect it to my computer or get ot the recovery. I can also not install a new recovery because i don't have root or adb and fastboot won't work.
Any ideas ?

TheGprodz said:
Hello! I have a huge problem with my tf700t, Windows 8 won't recognise my device. In device manger it just says: Unknown device.
I'v tried to install the usb drivers manualy but it won't work... I just get "can not find driver software for this device" the error device mangere gives me is "Windows has stopped this device because it has reported problems. (Code 43)" I also tired to install asus sync....
I'm running newest frimware form asus (4.2.1)
Before i installet the 4.2.1 from asus I was running offical cm 10.1 and everything was working. Then i decided to go back stock because i was going to sell the device. I wiped everything including system to unroot the device. After that I downloaded the firmware for asus web page and flashed it. Everything was working except i couldn't connect it to a computer. So i decided to try to flash a older frimware (4.1.1) but I was not able to get into recovery.
I don't know what to do now. I can't install a new rom becouse i can't connect it to my computer or get ot the recovery. I can also not install a new recovery because i don't have root or adb and fastboot won't work.
Any ideas ?
Click to expand...
Click to collapse
You do have USB debugging enabled??
What happens if you boot with Power and Volume Down, then select the flashing RCK icon with Volume Up? No recovery???

no....
Yes USB debugng is checked, and i'm not able to get to the recovery while pressing Power and Volume Down, then select the RCK icon....
See the picture of what happen when i choose RCK

TheGprodz said:
Yes USB debugng is checked, and i'm not able to get to the recovery while pressing Power and Volume Down, then select the RCK icon....
See the picture of what happen when i choose RCK
Click to expand...
Click to collapse
What you see there IS the stock recovery which overwrote CWM or TWRP when you flashed the stock firmware.
You can use the stock recovery only for one thing: Flashing an official Asus update. The Droid on his back tells you that the stock recovery does not find an update.
So that part is good. You're rom is intact and healthy.
Do you have access to a different computer? Can you try to get the tablet to connect in Windows 7?
I have no experience with Win8 - no idea what the driver problem may be. But that's what it is: You need to find he correct drivers....

I tried with my mothers laptop but that's also running windows 8 but same problem apres, and the other pc I have runs ubuntu :/

TheGprodz said:
I tried with my mothers laptop but that's also running windows 8 but same problem apres, and the other pc I have runs ubuntu :/
Click to expand...
Click to collapse
Check out this thread: http://forum.xda-developers.com/showthread.php?t=1583801

I'm not able to install drivers.... this is the error message translated from Norwegian to English
Can not install unknown device!
can not find driver software for device
If you know the name of the manufacturer of your device, please visit the manufacturer's website and look for driver software in the support section.
This is the error i get when i locate it to the drivers that i downloaded. I haved tried manny different drivers.

bump

[Q] Phone bricked after flashing kernel...!

Hi Guys...!
I am Muhammad Ali From Faisalabad Pakistan...! Using Huawei Ascend G510-0200 ...! Last night I've just flashed a zip in recovery mode that was including the boot.img file and then my phone got bricked...!
It only showes the splash screen which consist of A big green box, which has two small boxex inside, red and blue, phone is not detecting in recovery mode or not in the fastboot mode so that I cannot flash the stock kernel back to it...! My phone was running on CM 10.2 nightly which is Android 4.3.1...!
Device was not recognized in windows 7 completely , no plug and play options are avalable or not shown even in the device manager...!
Tried to put Fastboot.apk in the memory card and try to get it recognized in the system but failed...!
I want to get my phone working again...! Any method to change the kernel will be helpful...!
Can I tried it with Odin? Or any software like odin to work with...! Any hardware component which I can use for getting it fixed...!
Is it necessory to get it working with linux for better results...?
Any help will be appreciated...!

1 Thing I've tried later that is it is recognized as a modem device that is working correctly...! but in the firmware update mode...!
That is pink screen...!
but the fastboot and adb are not recognizing this device...!
Unbrick software also failed to get it recognized...!
No usb shown in my computer for this device...!
Cannot operate my phone so I am un happy...! isn't there any odin like software to do this...?
please help...!
sorry for uploading the pink screen image of another device becouse I do not have camera...!

The Odin just detected my Device but unable to flash successfully on it...!
Should I use the boot able sdcard for reflashing the firmware...!
boot able sdcard like you can use in the flashing of nook tablet?
Any Idea?

q
Hi,
I have same problem,did you resolve yours?
Muhammad_Ali said:
Hi Guys...!
I am Muhammad Ali From Faisalabad Pakistan...! Using Huawei Ascend G510-0200 ...! Last night I've just flashed a zip in recovery mode that was including the boot.img file and then my phone got bricked...!
It only showes the splash screen which consist of A big green box, which has two small boxex inside, red and blue, phone is not detecting in recovery mode or not in the fastboot mode so that I cannot flash the stock kernel back to it...! My phone was running on CM 10.2 nightly which is Android 4.3.1...!
Device was not recognized in windows 7 completely , no plug and play options are avalable or not shown even in the device manager...!
Tried to put Fastboot.apk in the memory card and try to get it recognized in the system but failed...!
I want to get my phone working again...! Any method to change the kernel will be helpful...!
Can I tried it with Odin? Or any software like odin to work with...! Any hardware component which I can use for getting it fixed...!
Is it necessory to get it working with linux for better results...?
Any help will be appreciated...!
Click to expand...
Click to collapse

problem
Did You fix yours phone?????
I have same problem,but havent find any solution yet....

i got the same problem any one knows how to fix it

[Q] brick ??!

Hi everyone,
I have currently some big issue with my GT-N8010.
My custom rom wasn't running very well so I decided to reset my tablet and go back to a new fresh installation.
I downloaded the latest firmware of the tablet on sammobile and started to update it with Odin PC, but in the middle of the transfert I got an error and now my tablet is stuck on the "Firmware upgrade encoutered an issue. Please select recovery mode in Kies & try again.".
I have no idea how to fix it! And I can't go back to download mode anymore. On top of that, my tablet seems not to be recognize by my computer (I tried to install Kies and the samsung usb driver several times but it keeps saying that's the driver is not ok)...
Can someone help me please ?
Thank you in advance!

What custom rom did you had ? 4.4.2 or 4.1.2 ?

KoRoZIV said:
What custom rom did you had ? 4.4.2 or 4.1.2 ?
Click to expand...
Click to collapse
It was a 4.1.2 (HD Revolution) and I tried to flash with odin the N8010XXUCMK2_N8010XSACNA2_XSA

First uninstall kies and all usb drivers. Restart your computer.
If you can get in download mode (power+volume down then volume up when asked) :
Install some drivers from the sticky topics here on xda. Download the firmware again from another location if possible. Use a different usb port.
If you can't get in download mode, you have to try with kies. I never had success whit it, and i really need it. But it says that n8010 does not support initializing or something like that. Maybe someone else can help with kies.
Sent from my GT-N8010 using Tapatalk

I don't know where it comes from...
I tried everything, uninstall/reinstall Kies/Usb driver, put a VM with Win7 (As I am under Windows 8.1), put Win7 in dual boot to maybe fix the compatibility issue but nothing seems to work! And of course I don't have any other computer to use...
That's maybe the reason the tablet get broken as I used to use Odin on another PC and I didn't check if the usb driver was installed on this one??
I just know that Odin recognized my tablet so I was able to launch the installation of the new firmware.
I feel really bad...Hope the tablet is not definitly dead!

Faulty USB cable perhaps ?
Sent from my GT-N8010 using Tapatalk

Ok so I went to a Samsung store and they told me that I have to send my tablet to the repair center in the country where I bought the device.
It's a big issue for me as I am now living in Australia and my tablet has been bought in France.
On top of that the guy from Samsung explained me that now it's normal if my tablet is not any longer recognize by my computer...
I heard about JTAG, I don't have any idea about the subject but may it fix my problem?
Does someone know how samsung is able to fix the tablet, so I may fix it myself instead of sending to them...?

[Completed] [Q] Asus Memopad HD7 Bootloop PLEASE HELP

Hello everyone,
last week i rooted my asus memopad hd7, after a few days i tried to unlock the bootloader and flash a few .zip files.
i tried to install a custom recovery.img but that went wrong. my tablet rebooted and ended in a bootloop
i can't reach the recovery beacause i flashed a recovery.img
* i can't even reach the recovery by pressing the volume up key+the powerbutton.
* i tried to connect my tablet to the computer, when i plug the usb cable in my computer, it will gives a sound, but after a few seconds my tablets start bootlooping again.
* i tried to connect my tablet to the flash tool but it wont connect to it.
* http://forum.xda-developers.com/showthread.php?t=2503668 i tried that solution already
please help,
Jackplug

Jackplug said:
Hello everyone,
last week i rooted my asus memopad hd7, after a few days i tried to unlock the bootloader and flash a few .zip files.
i tried to install a custom recovery.img but that went wrong. my tablet rebooted and ended in a bootloop
i can't reach the recovery beacause i flashed a recovery.img
* i can't even reach the recovery by pressing the volume up key+the powerbutton.
* i tried to connect my tablet to the computer, when i plug the usb cable in my computer, it will gives a sound, but after a few seconds my tablets start bootlooping again.
* i tried to connect my tablet to the flash tool but it wont connect to it.
* http://forum.xda-developers.com/showthread.php?t=2503668 i tried that solution already
please help,
Jackplug
Click to expand...
Click to collapse
Hello! You are very welcome to ask your question in the thread that you quoted, as you will most likely get a lot of help from there. It looks like you may have to flash stock firmware to restore your device, before you can proceed to flashing roms etc.
Good luck!

I understand, i only need to know how that works. I tried many way like android multitool and flasher.
Do you have some other sugentions?
Sent from my HTC Desire 310 using XDA Free mobile app

Jackplug said:
I understand, i only need to know how that works. I tried many way like android multitool and flasher.
Do you have some other sugentions?
Sent from my HTC Desire 310 using XDA Free mobile app
Click to expand...
Click to collapse
Please ask the thread: http://forum.xda-developers.com/showthread.php?t=2503668&page=134 You will most likely get some pointers there.
All the best!

[Completed] Help! Seriously messed up ROM mod on Galaxy Tab 10.1

So I got this free Galaxy Tab 10.1, and tried adding a Custom ROM to help it run better, and be able to run some apps that the old android 3 os couldn't run. As of now, it has CWM v6.0.3.6 installed, as well as a KitKat ROM. This ROM seems to have been corrupted, and now the keyboard constantly stops working (receiving constant pop ups about it) and it no longer will connect to my PC via USB, although it still charges when it is plugged in.
I made a mistake when I was installing this ROM, and my backup stock ROM was never loaded onto the tablet.
My original thought was to use the install from sideload option to get a different ROM onto it, but it doesn't detect even in Recovery mode.
Odin does detect the device, so is there a way to use this utility to fix this problem? Or maybe some other option that I'm not thinking of?
Thanks for the help

ElDochart said:
So I got this free Galaxy Tab 10.1, and tried adding a Custom ROM to help it run better, and be able to run some apps that the old android 3 os couldn't run. As of now, it has CWM v6.0.3.6 installed, as well as a KitKat ROM. This ROM seems to have been corrupted, and now the keyboard constantly stops working (receiving constant pop ups about it) and it no longer will connect to my PC via USB, although it still charges when it is plugged in.
I made a mistake when I was installing this ROM, and my backup stock ROM was never loaded onto the tablet.
My original thought was to use the install from sideload option to get a different ROM onto it, but it doesn't detect even in Recovery mode.
Odin does detect the device, so is there a way to use this utility to fix this problem? Or maybe some other option that I'm not thinking of?
Thanks for the help
Click to expand...
Click to collapse
Greetings and welcome o assist. If odin detects your device then kies emergency firmware recovery should work, that will return your tablet to its original state. The other option is to flash a different rom through recovery, just download it to your sd card and then flash it
Good Luck
Sawdoctor

sawdoctor said:
Greetings and welcome o assist. If odin detects your device then kies emergency firmware recovery should work, that will return your tablet to its original state. The other option is to flash a different rom through recovery, just download it to your sd card and then flash it
Good Luck
Sawdoctor
Click to expand...
Click to collapse
I booted the device into download mode, where it is detected by Odin. Kies can tell that something is connected, but it just continuously tries to connect. The device does not have an sd card slot, so there is no way for me to add a different rom to it.
EDIT: Kies does not detect anything being connected at all if the device is booted normally.

ElDochart said:
I booted the device into download mode, where it is detected by Odin. Kies can tell that something is connected, but it just continuously tries to connect. The device does not have an sd card slot, so there is no way for me to add a different rom to it.
EDIT: Kies does not detect anything being connected at all if the device is booted normally.
Click to expand...
Click to collapse
Additional update:
By using the calculator app to copy paste numbers, I've gotten the device connected to my phone's hotspot, along with my laptop. Perhaps there is some way to force a file download over wifi? The device shows up in my network places on my laptop, but the folder is empty.

ElDochart said:
Additional update:
By using the calculator app to copy paste numbers, I've gotten the device connected to my phone's hotspot, along with my laptop. Perhaps there is some way to force a file download over wifi? The device shows up in my network places on my laptop, but the folder is empty.
Click to expand...
Click to collapse
If you start kies and select emergency firmware recovery it will ask you to put your phone in download mode and connect it. Does kies recognise it then?
Sent from my SM-N930F using Tapatalk

Problem resolved, I was able to locate a Samsung release 4.0.4 for my device in .md5 format and flashed it with Odin. Thanks for the help.

ElDochart said:
Problem resolved, I was able to locate a Samsung release 4.0.4 for my device in .md5 format and flashed it with Odin. Thanks for the help.
Click to expand...
Click to collapse
Excellent news [emoji106] [emoji106]
Sent from my SM-N930F using Tapatalk