[Q] rooting Acer Iconia B1-A71 - General Questions and Answers

My Acer Iconia B1_A71 was rooted according Toolkit Acer Iconia v0.9.4.
The system.img.gz was derived from RV05RC05 (RV05RC05 was also mentioned in the program during the rooting proces)
After rooting I got the message that the B1-A71 was rooted now.
But when I restarted the tablet only the Acer logo appeared.
As described in post #264 from Entonjackson I tried to reinstall the system.img.gz.
The system image was not recognized by the B1-A71 so I renamed it to system.img.zip.
It was recognized now but the reinstallation was aborted after a few seconds.
Can you suggest mee how to proceed?

justme47 said:
My Acer Iconia B1_A71 was rooted according Toolkit Acer Iconia v0.9.4.
The system.img.gz was derived from RV05RC05 (RV05RC05 was also mentioned in the program during the rooting proces)
After rooting I got the message that the B1-A71 was rooted now.
But when I restarted the tablet only the Acer logo appeared.
As described in post #264 from Entonjackson I tried to reinstall the system.img.gz.
The system image was not recognized by the B1-A71 so I renamed it to system.img.zip.
It was recognized now but the reinstallation was aborted after a few seconds.
Can you suggest me how to proceed?
Click to expand...
Click to collapse
I reinstalled the system with the file OS_Acer_Acer.AV051.B1-A71.RV05RC05_A41JA42J_A.zip from the thread http://forum.xda-developers.com/showthread.php?t=2240029 of EntonJackson.(thanks!)
The tablet is ok now.
After that I rooted it from scratch via the Linux option.
I got at the end the message that the tablet was rooted now.
But checking with Rootchecker from GooglePlay shows no root access.
Can you tell me what I am doing wrong?

Any update?
Is here simple metod to nie obtain root?
Kingo root, dosent work for me.
Wysłane z mojego B1-A71 przy użyciu Tapatalka

Related

[Q] acer e110 how to update firmware??

i got this phone that hangs on ACER logo, i tried to perform hard reset but problem still persist...
i downloaded an update file from acer support sites but each time i try to update there was an error appearing on my screen says the its not the same software that i downloaded...
but im pretty sure that i downloaded an update firmware for acer e110.....
any help please?

[Q] I get error flashing acer iconia a1-810

Hi
after rooting my acer iconia a1-810, tablet keeps locking screen after 0,5 sec. so I can't enable usb debugging and I can't install different rom with Acer Iconia v0.8.1 toolkit
So i tried install different rom from system recovery, but I get check.partition.size=[__PROP_UNDEFINED__] error,
maybe somebody know how to fix this error ?
This error like error in rom file. In this situation you can help rom build author. Or needs more details.
h33x said:
This error like error in rom file. In this situation you can help rom build author. Or needs more details.
Click to expand...
Click to collapse
I installed RV18RC07_WW_GEN1 rom from [ToolKit] Acer Iconia v0.8.1 page, first I stuck in boot loop. than i tried install update.zip for that rom, during installation proccess I got that partition error, but my iconia after restart booted up, but stuck with always locking screen.
probably I chose wrong rom version for rooting
maybe I can revert that process or install decent rom via fastboot, what do you think ?
after all my screen wasnt locking down, just lights turned off after half sec. pressing volume up and down I kept screen on, and I manage to enable usb debugging mode in menu.
I unrooted with RV18RC07 stock image, but it did not solved my problem.
Can I flash different rom for example stock RV03RC08 over stock RV18RC07 on acer iconia a1-810 ?
check it maybe will help, good luck !
I bought my Acer A1-810 it’s 2,5 months (from amazon). And few days ago I decided to root it. 1 hour later i realized that was not a really good idea, because i did not know much things about, and it was not as easy as I thought. and voila as a result : bootloop !
I tried different roms, different update.zips but got allways the same error : ” check.partition.size=[__PROP_UNDEFINED__] ”
I was desperate…I was at the point of resend it to Acer for repair. But last try was successful, I did it, I did !!! And there is how !
1. go to acer web page --->support--->drivers and manuels
2. choose your model acer a1-810
3. As my divece was bought in usa, my FW upgrade is AV052.RV26RC06.PA.CUS1 (in O.S ), download it !
4.when it’s done, you should unzip and should get update.zip separately.
5. Put update.zip on SD card
6.Put SD card in your device.
For next steps see the manuel of update
Dead
saluttt said:
check it maybe will help, good luck !
I bought my Acer A1-810 it’s 2,5 months (from amazon). And few days ago I decided to root it. 1 hour later i realized that was not a really good idea, because i did not know much things about, and it was not as easy as I thought. and voila as a result : bootloop !
I tried different roms, different update.zips but got allways the same error : ” check.partition.size=[__PROP_UNDEFINED__] ”
I was desperate…I was at the point of resend it to Acer for repair. But last try was successful, I did it, I did !!! And there is how !
1. go to acer web page --->support--->drivers and manuels
2. choose your model acer a1-810
3. As my divece was bought in usa, my FW upgrade is AV052.RV26RC06.PA.CUS1 (in O.S ), download it !
4.when it’s done, you should unzip and should get update.zip separately.
5. Put update.zip on SD card
6.Put SD card in your device.
For next steps see the manuel of update
Click to expand...
Click to collapse
I did as you guide ...
The upgrade is success and i press power button for reboot. After that my tablet is dead. tried following all of Acer's recomendations (vilumeup button + power button, popping battery out, hold power button in and then insert charger, stick a paperclip in reset button hole, etc). nothing works.
My tablet image version Acer-av052-a1_810-rv03rc08-ww.gen1 Please put the Flash file to it in this post thank
Hey did you by any chance find a fix for your problem? Cuz I'm having the exact same problem and I can't find any solutions anywhere.

[Q] Please help brick my acer iconia b1-710

hi,
tried to root the device acer iconia b1-710 with toolkit 0.83 and by mistake puted the wrong image. now my device on boot loop and not wake up.
please what to do?
thanks
david
dudico31 said:
hi,
tried to root the device acer iconia b1-710 with toolkit 0.83 and by mistake puted the wrong image. now my device on boot loop and not wake up.
please what to do?
thanks
david
Click to expand...
Click to collapse
You have to flash your stock rom
Search it in google
And flash that rom using your flashing tool
Hit THANKS if I helped you
Hi thank you for responding but I can't find the firmware for my tablet as acer dosn't. Publish it.
Go you have any idea what I should do?
dudico31 said:
Hi thank you for responding but I can't find the firmware for my tablet as acer dosn't. Publish it.
Go you have any idea what I should do?
Click to expand...
Click to collapse
Have just recovered mine, I flashed this firmware in stock recovery (power + vol up), this may work on its own, I had to flash with SPFlash as well though. (Instructions on same thread as the above firmware - let chrome translate it for you)
I will try, Thanks.
C'ant find the stock rom in the russian site link,
Can you upload it to some cloud ? (google drive etc )
Thanks,
David
It works !!!!!
Thank you so much, you saved my Tablet
I cant update it, it still in bootlooping :c
SPFT error
When I press download button on spft I get red bar 100% and error S_SECURITY_SF_CODE_DOWNLOAD_FORBIDDEN (6010)
What to do now?

Acer Iconia A3-A20

I have an Acer Iconia A3-A20 tablet that had a virus that wouldn't clear up with a factory reset and an attempted system update.
After the update, it rebooted to a "no command!" page with the message that "system has been root!".
I tried the "power up with the volume down" recovery but it was unsuccessful.
I followed the instructions on http://forum.xda-developers.com/showpost.php?p=59693904&postcount=480 and after over 12 hours, there has been no progress with the flash tool and the screen is completely black on tablet. The PC still does pick it up in the device manager and beeps when plugged in.
Is there any way to get this tablet up and running or is it bricked?
Hi !
I have the same problem... Have You any solution ?
kevj67 said:
Hi !
I have the same problem... Have You any solution ?
Click to expand...
Click to collapse
No solution... Still dead.

Help Rooting iRulu X1 Pro Lightning Tablet

Help!!! I just bought an iRulu X1 Pro Lightning Tablet with Android 5.1.1 and I'm having trouble rooting it. I've tried using all the usual rooting apps (Kingo Root, King Root, IRoot, One Click Root, SMS Root, Towelroot, Z Root, and Frama Root) but nothing seems to be working. The tablet gets to about 60% at best and then it fails. I have the USB Debugging enabled. What could I be doing wrong? What else can I do? Please help!!!
Has anyone figured out how to root the Irulu Pro Lightning?

Categories

Resources