Database Info

[q] help me. Usb!

i rencetly bought the htc touch pro but when i connect trough usb on pc the pc does not reconize. it's not showing nothing on phone i try severel usb's and diferent pc's with diferent operating system. the phone charges but it not recognize. i only can syncronize trouhg bluetooh.
i did all the step's i find in the forum and in the internet. and i'm getting the same results.
Please anyone can help me ???? tnks.
Sory for my english.

Are you running stock or a custom ROM? I haven't had that issue(yet) but I am trying to help troubleshoot.

viBranZeOS-2.0-WWE this is the rom that i'm using. and i try alredy 2 other roms, and its the same.

I honestly have no idea what the issue is nor a fix/work-around. However, what I am attempting to deduce is if you had a stock ROM I wouldn't be of much assistance because I only run the ROM in my sig/signature, which is a custom ROM. Now, I'm not 100% on if your ROM has this option but I know the ROM in my sig has an option to change the behavior of the USB connection, from mass storage to active sync. What I am attempting to figure out is if one of those modes has been enabled and the registry is just not accepting or if the usb port is stuck on only charging. I have no clue on how you would find out as I've never heard of that ROM. By the way, what version of TP do you have, GSM or CDMA and is it a RAPH100, RAPH110 or what ever is showing above the imei behind the battery. You should see a bar code and just above that are four (4) letters followed by three (3) numbers. Let us know what you have and maybe someone else can chime in.

EnergyROM 29018 w/CHT2.0&.sencity this is your rom ??? i can give it a try. how can i see if is GSM or CDMA ???? my phone is RAPH100.
tnks in advance.
p.s i'v had the phone charging for 2 hours and it's only 2 risks. :s

Clarification: It's not my ROM but it is a ROM that I use most often. GSM/CDMA depends on your carrier/service provider. Looks like you may have a GSM device but I'm not a 100%.
Additionally, what happens when you turn off(shut down your phone completely) and charge?

well i'm using vodafone. and the phone is unlock from factory. it was that the guy told me. i am giving a try with that rom. whit the phone shut down and usb turn on the home buton stay's whit the light. i'n the 3 color screen when i conect the usb it's allways saying serial and don't change to usb.

Not exactly sure that is what I am asking. So do this for me: remove the battery, then put it back in and without turning on the device, plug in your phone to a charger(not USB cable) and tell me if you see an LED circle around the center button slowly light up and then disappear.

yes is that what it happens. and it happens this to with the usb plug in. whit the phone on or off.

So let me guess here, does it still take forever to charge from 30% and still get hot when the device is completely off and plugged in. If so, it still seems like it could be a battery issue to me. I don't know how to confirm if it is the device or the battery but I'd start there if you haven't already.
Additionally, if you are getting to the multicolor screen, then connecting the device to your computer and not seeing the change from Serial to USB and you've already tried changing the USB port, USB cable and computer then it is possible that your device's USB port is somehow broken(for the lack of a better word).

"if you are getting to the multicolor screen, then connecting the device to your computer and not seeing the change from Serial to USB and you've already tried changing the USB port, USB cable and computer then it is possible that your device's USB port is somehow broken(for the lack of a better word)."
you are right i go the multicolor screen and not change from serial to usb. but i didn't try in other computers. i will tell you when i try.

microUSB -> USB C - issue with screen

Hi,
recently I bought microUSB -> USB C connector. It's working fine, file transfer and charging is flawless. But the issue is that when I disconnect it, screen will not turn off by itself. I must do it manualy, clicking button or double click. I have 30s timeout, and screen always is switching off while charging. So there is something wrong with this connector I think... After reset everything is back to normal (I didn't found any other solution then this).
So my question is, is anyone else using that kind of connector, and have similar issues?
Rom is Fulmics 1.7.
Cheers,
Mark

goofy3 said:
Hi,
recently I bought microUSB -> USB C connector. It's working fine, file transfer and charging is flawless. But the issue is that when I disconnect it, screen will not turn off by itself. I must do it manualy, clicking button or double click. I have 30s timeout, and screen always is switching off while charging. So there is something wrong with this connector I think... After reset everything is back to normal (I didn't found any other solution then this).
So my question is, is anyone else using that kind of connector, and have similar issues?
Rom is Fulmics 1.7.
Cheers,
Mark
Click to expand...
Click to collapse
You need to ask in the proper thread...
https://forum.xda-developers.com/lg-g5/development/rom-02-01-fulmics-rom-1-0-v20a-tweaks-t3530406

So you think this is rom releated?
EDIT: Problem was with 3mint battery. After disabling it, everything is ok

New modal dialog appears when connected to USB in car

Ever since the Oreo update my phone displays a modal dialog when I connect to the USB port in my Subaru for charging. The dialog suggests that the phone resources can't be accessed and that I should download a samsung app (the one you use to port data to a new phone). All I want is to charge the phone like I've been doing for the past 6 months. It's inconvenient because I have to wake up the phone and hit OK to dismiss the dialog box. Is there any way to tell the phone to just use the USB for charging only by default? I tried changing to charge phone only in the drop down notification panel but it doesn't stick for the next session. I looked through the very extensive list of settings and couldn't find anything relevant. I know that I could try to find a cable that offers charging only or perhaps connect the phone to a cigarette style charger. These are inconvenient as I already have the appropriate USB-C cable and charging port. Am I missing the setting or solution? Thank you.

Here is a picture of the annoying message that recently appeared on my phone after updating the OS. The message appears when connecting my phone to my car's USB port for charging. Does anyone know how to stop this message from coming up? Thanks.

Have you tried plugging it in, acknowledging the popup, then switching usb mode to charge-only? It should remember that mode for future plug-ins.

xpersimmon said:
Here is a picture of the annoying message that recently appeared on my phone after updating the OS. The message appears when connecting my phone to my car's USB port for charging. Does anyone know how to stop this message from coming up? Thanks.
Click to expand...
Click to collapse
I get that same message when I plug into the airplane media system USB to charge. I just switch USB option to charge and it goes away.

eregev said:
Have you tried plugging it in, acknowledging the popup, then switching usb mode to charge-only? It should remember that mode for future plug-ins.
Click to expand...
Click to collapse
I tried the same thing to see if it would work and it doesn't save your preference. Tested via both the notification and via developer options.

mjones73 said:
I tried the same thing to see if it would work and it doesn't save your preference. Tested via both the notification and via developer options.
Click to expand...
Click to collapse
Let's see if it works for OP.

eregev said:
Have you tried plugging it in, acknowledging the popup, then switching usb mode to charge-only? It should remember that mode for future plug-ins.
Click to expand...
Click to collapse
Yes, good suggestion. I tried that but the setting isn't sticky (it asks everytime).

rsfinsrq said:
I get that same message when I plug into the airplane media system USB to charge. I just switch USB option to charge and it goes away.
Click to expand...
Click to collapse
Yes, extra fiddling with my phone in this way is inconvenient and unsafe while driving.

It is a rather inconvenient, and annoying, situation.

Drunkula said:
It is a rather inconvenient, and annoying, situation.
Click to expand...
Click to collapse
One of the things that bugs me about Samsung is that the number of settings available are enormous but many don't work the way I want.
This seems like a simple problem that was recently introduced. I guess I need a charging only cable....

Anyway to backup with black screen/dead touch screen, no usb debug? HDMI to type C?

Hello everyone,
I would really like some help advice/experience from other here regarding the HTC U11. I was just using the device normally one day and the screen went black completely. I think the touch screen is dead as well, as it doesnt seem to respond when I attempt my usual pattern unlock from muscle memory. I am sure the device is still working normally as I had... accidentally connected to emergency operators, could still use Whatsapp Web and my PC does show HTC U11 but I am unable to change the option to MTP to transfer my files.
Does anyone have any advice on how I can access my data through enabling usb debugging/ changing the connection mode to MTP? Apart from repairing the screen only.
While I am not sure about the software options. I am attempting to output using a Type C to HDMI hub to output display and use a mouse to access the phone. Since it was rather hard for me to find answers about the compatibility and usage so I was hoping to get some experiences so can quickly attempt this method when the few cables I purchase arrive.
1) Are these type C to HDMI cables generic? I have seen some articles saying there are type C to hdmi with MHL and others with digital output and I confused if those I bought will work with the U11. (Seller says works to Macbook, Xiaomi, Huawei P20)
2) Are these adapters simply plug and go? Do I have to unlock the screen or install any firmware (as I clearly dont have a screen haha..)? Does this apply for both the HDMI output and using a mouse
3) Would I specifically need a SMART TV with HDMI to get output out or any monitor with HDMI would work fine?
If anyone have a working U11 and using HDMI to Type C would really love to hear from you!
Thank you for any advice/experiences in advice!

Pulling data with a dead screen (replace attempted) and number lock

The screen on my Motorola Droid Ultra broke (no visual, no touch that I can figure). It has a numeric lock screen (I know the code still) and although I have a computer that has connected to it previously, without unlocking it it will not show up in My Computer.
My primary goal is to be able to pull out Color Note memos and browser tabs/bookmarks for two or three browsers. Having it working would be neat but not required.
I envision this being done by fixing the phone (new screen) or some program that can have my computer serve as screen and input for the hardware.
USB debugging is off - probably because it broke Pokemon Go. SIM removed and disabled (been working on this off-and-on for over a year, at this point I am just stubborn and wanting to learn).
I tried replacing the screen, or rather, pulling out of board and putting it into a different Droid Ultra (same phone, different screen/digitizer and case). It did not work. I opened it up and tried reconnecting, still nothing. When plugged in as one does to charge it intermittently vibrates, which according to the internet seems to mean there is no screen connected. There is.
I have a pigtail USB, microUSB male, micro usb female, and with all that plugged in to the phone, computer (via charger/phone cord), and a keyboard the keyboard does not light up (capslock, num lock) but the phone starts the occasional buzzing for (what I assume is) the screen "unplugged". Not entirely sure how to know is phone is on or off, or if it will turn on at all with the screen "not connected" as it seems to think.
I so want to just be able to pull out the keyboard and plug it in like I can do with real computers. >.<
Any Ideas?

use a OTG cable and connect a mouse, it works!
look for screen mirroring software, to share data with your pc.