I flashed a wrong recovery img from Mobileuncle tools,from then the phone is not booting,it is not getting detected in Sony pc companion and wmshua flash tools.
Only red led glows for some time,,when connected to pc.
Plz help me
Use PC companion.. click on update my phone..then Repair my phone..then it will download some files.. then select the model.. then it will say press vol down and connect usb..but it didnt work for me.. press vol up+vol down+power+plug in usb.. then it will download and flash your phone..
Hope it works..
Just Click on thanks if it works for you..
cant help
baselrabia said:
I flashed a wrong recovery img from Mobileuncle tools,from then the phone is not booting,it is not getting detected in Sony pc companion and wmshua flash tools.
Only red led glows for some time,,when connected to pc.
Plz help me
Click to expand...
Click to collapse
all you can do is contact service center and beg for mercy
Related
Install instructions:
first time
- power off the phone:
- hold vol+ and plug usb to boot into fastboot (blu led)
- fastboot flash boot boot.img (from cm10 zip)
- fastboot reboot
- enter recovery, on boot led will be violet for 3'', during this period press vol+
- flash rom zip
- flash gapps zip
- wipe
- reboot
----------------------------------------------------------
after fast reboot i disconect device to go to recovery in cwm, but i shouldnt do that and i should waited for violet led and continue that,so my xperia miro st23i is now dead, is there any help with flashtool or similar things to revoke my phone, or i should rma it ? thank you very much ((((
Try repair using Pc Companion.
If dont work use flashtool,
Download and flash a firmware .ftf for Xperia st23.
This is a french tutorial:
http://www.phonandroid.com/forum/xperia-miro-installer-un-firmware-kernel-officiel-t30288.html
Sent from my ST25i using xda app-developers app
in device manager it says semc flash device, seus update says hone has modified software and cannot be updated, flashtool 0.9.8 see device and it says device connected in flash mode, but when i click on flash it says error preparing files, and i did download ST23i_4_0_4_xperia.ftf, that its official firmware,. help
keewee23 said:
in device manager it says semc flash device, seus update says hone has modified software and cannot be updated, flashtool 0.9.8 see device and it says device connected in flash mode, but when i click on flash it says error preparing files, and i did download ST23i_4_0_4_xperia.ftf, that its official firmware,. help
Click to expand...
Click to collapse
Download again the ftf. Follow this tutorial
http://translate.google.be/translat...aller-un-firmware-kernel-officiel-t30288.html
vol up gives adb mode, vol down gives flash mode, tryed flashboot boot boot.img, then flash reboot, nothing, tryed flashtool 0.9.9m stuck on reading device information, flashtool 0.6.8.0, says unpluged the device press and hold back button, it's xperia miro, back button is on touchscreen, help
SUCCESSFULLY FLASHED with flashtool by tutorial from that french forum, thank you, BUT, when i turn on phone it wont start green led blink once and nothing, i dont have locked bootloader maybe is that a problem?
PHONE REVIVED FROM THE DEAD :laugh:, THANK YOU, METHOD 2 from that french forum SAVED MY PHONE , THANK YOU
Sent from my ST25i using xda app-developers app
keewee23 said:
PHONE REVIVED FROM THE DEAD :laugh:, THANK YOU, METHOD 2 from that french forum SAVED MY PHONE , THANK YOU
Click to expand...
Click to collapse
did you use flashtool for reviving your phone???is it your phone is miro????please help me...my phone is dead now and i cant resurrect it...please help me...
---------- Post added at 03:48 AM ---------- Previous post was at 03:15 AM ----------
keewee23 said:
PHONE REVIVED FROM THE DEAD :laugh:, THANK YOU, METHOD 2 from that french forum SAVED MY PHONE , THANK YOU
Click to expand...
Click to collapse
i performed the method 2 from flasher official kernel.....you did perform that to revive your miro right???the problem is...i'm stucked in "reading device information" thing....did you also experienced it???should i be worrying about it??or is it normal.......any help please????please......i'm begging you and i'm stuck in this problem for a couple of days....any help and reply will be a great thing to me......
How to Fix Dead Miro
I was Flash Rom my Miro and i got dead i downloaded flash 0.8.0 and 0.8.6 but when i connect my phone it show green light but its doesn't show in flash tool show some error and closed plz help which version of flash you used . i really need help :crying:
Yes!!!!!!!!! Flash/Unbrick Your Xolo A700
(PLEASE FOLLOW INSTRUCTIONS CAREFULLY,I AM NOT RESPONSIBLE IF YOU TURN IT INTO A PAPERWEIGHT)
Firstly Download Firmware And Tools From This Link
Things Needed
Bricked Xolo A700
Usb Cable
Windows Pc
And A Calm Head
Instructions
Click Here For Youtube Tutorial
Remove Battery From Your Phone And Re-insert It
Connect Your Phone To Pc With Usb Cable
Your PC Will Prompt You To Install The Usb Drivers
Go To-Device Manager>Ports>MTK 65xx Preloader
And Do A Right Click On It>Update Driver>Browse My Computer For Driver(Something Like That)
Select The Driver Folder Where You've Extracted All The Files From The ZIP And Follow The Setup
After Installing Remove Your Phone From PC
Remove And Re-Insert The Battery
Open SP Flash Tool
Click On Scatter Loading
Navigate To The Folder Where You've Extracted The Stock Rom Folder
Select MT6577 Scatter .txt
Click On Download Button>Click On Yes
Connect Your Phone And Wait Till The Process Is Complete
Voila!!!!!!!!!!!!!!!!!!!!!!!!!!
You.................Yes You've Done It
For Those Who Are Facing Black Screen After Flashing
Hit Format-Download Button Instead Of Pressing Download
And Everything Will Be FIne:highfive::highfive:
Need Help
I am getting a continuous restart after the logo appears, I think I have deleted the recovery as it does not goes into recovery also, keeps on restarting, let me know if this method will help me to unbrick my device..
safetydell said:
I am getting a continuous restart after the logo appears, I think I have deleted the recovery as it does not goes into recovery also, keeps on restarting, let me know if this method will help me to unbrick my device..
Click to expand...
Click to collapse
ys you can recover it with help of the above tut
yasirmujtaba said:
ys you can recover it with help of the above tut
Click to expand...
Click to collapse
Thanks, I am out of station as of now, will go home by Saturday, I will surely try this method, hope it helps me to recover my device..
The download link to "firmware and Tools " is not working.
Edit: It is Working now.
Help Needed
yasirmujtaba said:
ys you can recover it with help of the above tut
Click to expand...
Click to collapse
No Luck dude, I did the same as you said but after everything it showed download complete and I started my phone, it came to logo " XOLO " and after that blank screen waited a lot but still the same blank screen, any help from you pls...
sorry for replying late
then you can hit format-download in sp flash tool
it will work for sure
Sent from my Xolo A700 using xda premium
yasirmujtaba said:
sorry for replying late
then you can hit format-download in sp flash tool
it will work for sure
Sent from my Xolo A700 using xda premium
Click to expand...
Click to collapse
Thanks everything went well and was able to get the recovery back but not the stock, booted in CWM recovery and installed your xtrance rom as i was not able to boot the stock rom, it was idle in the boot and was not booting also, anyways thanks now now device is unbricked..
safetydell said:
Thanks everything went well and was able to get the recovery back but not the stock, booted in CWM recovery and installed your xtrance rom as i was not able to boot the stock rom, it was idle in the boot and was not booting also, anyways thanks now now device is unbricked..
Click to expand...
Click to collapse
which option you chose for format I chose "Automatic and format whole flash except bootloader and nav bin something"
it goes dead not even XOLO logo but when chose download it shows xolo logo and then blank
need urgent help
i formatted entiree flash and now sp tool doesnt detect my phone. please help me out.
Install the drivers agin and use diff usb cable
Sent from my IQ446 Magic using xda premium
actually now the phone is not recognized as a phone. but unknown device by the computer. the computer doesnt accept the ini files as drivers saying unknown driver. i m in a pickle now. i tried changing the usb cable still nothing. i think my preloader is also formatted. can u help me in flashing the preloader back?
Didn't try FORMAT
I used the tools to unbrick my xolo a700 struck at bootloop. But no luck. its still the same. WHAT DO U SUGGEST???
Struck at XOLO logo after XOLO animation
I given factory Reset and the bricked.
I tried the procedure after that my xolo mobile struck at XOLO logo after XOLO animation...
Please help....!!!
guys please help us by posting some tried and tested step by step procedure. My Xolo A700s is stuck on boot loop. even i flashed original rom . but dont know what to do with the update file provided along with the rom. guys help
jash2711 said:
actually now the phone is not recognized as a phone. but unknown device by the computer. the computer doesnt accept the ini files as drivers saying unknown driver. i m in a pickle now. i tried changing the usb cable still nothing. i think my preloader is also formatted. can u help me in flashing the preloader back?
Click to expand...
Click to collapse
What did you do? I think I have a similar issue with my tablet, a Pixi 8079.
My android tablet is stuck at boot screen ... i cant access CWM...:crying:
when i tried to connect it with pc ...the USB is not recogonized and i am not able to reflash it ....pls help...
athulll07 said:
My android tablet is stuck at boot screen ... i cant access CWM...:crying:
when i tried to connect it with pc ...the USB is not recogonized and i am not able to reflash it ....pls help...
Click to expand...
Click to collapse
i think your tab is bricked...
to connect your device to your pc...try installing usb drivers for your tab...
and..
to flash it yu need to get into the download mod of your device..only then yu can flash it...
TT95 said:
i think your tab is bricked...
to connect your device to your pc...try installing usb drivers for your tab...
and..
to flash it yu need to get into the download mod of your device..only then yu can flash it...
Click to expand...
Click to collapse
How to install drivers ?? when i plug my tab into pc nothing happens ..... i cant access download mode or recovery mod ...pls help..
Try rebooting in recovery mode directly with some button combination.It happend with my htc explorer once.Only thing worked is rebooting in recovery mode and doing factory reset( for HTC explorer it is power + volume down key )
maheshhraut said:
Try rebooting in recovery mode directly with some button combination.It happend with my htc explorer once.Only thing worked is rebooting in recovery mode and doing factory reset( for HTC explorer it is power + volume down key )
Click to expand...
Click to collapse
i tried it ...i tried all types of combinations...it didnt work
athulll07 said:
My android tablet is stuck at boot screen ... i cant access CWM...:crying:
when i tried to connect it with pc ...the USB is not recogonized and i am not able to reflash it ....pls help...
Click to expand...
Click to collapse
Follow this guide and install these OEM USB Drivers => OEM USB Drivers
athulll07 said:
How to install drivers ?? when i plug my tab into pc nothing happens ..... i cant access download mode or recovery mod ...pls help..
Click to expand...
Click to collapse
hope yu have followed the guide given to yu by philos64..
it will help..
after installing driver try booting into download mode of your tablet...than only yu can flash your phone with a firmware..
I flash the cm11.zip in cwm on my xperia tipo
After flashing i reboot the system
But after that my phone does not swtch on even the recovery mod does not open.
I tried to connect the phone with pc but the pc does not detect my phone.
The sony logo also does not come up.
What should i do?
Plz help me?
My phone almost dead.
Nihar92 said:
I flash the cm11.zip in cwm on my xperia tipo
After flashing i reboot the system
But after that my phone does not swtch on even the recovery mod does not open.
I tried to connect the phone with pc but the pc does not detect my phone.
The sony logo also does not come up.
What should i do?
Plz help me?
My phone almost dead.
Click to expand...
Click to collapse
Try connecting your device to your PC in Fast Boot Mode and flash proper kernel with recovery.
I flashed a wrong recovery img from Mobileuncle tools,from then the phone is not booting,it is not getting detected in Sony pc companion and wmshua flash tools.
Only red led glows for some time,,when connected to pc.
Plz help me