is the 920F a def go on AT&T LTE in USA? i see the I but not verified the F. anyone have ?
daddioj said:
is the 920F a def go on AT&T LTE in USA? i see the I but not verified the F. anyone have ?
Click to expand...
Click to collapse
Yes, both the G920i and G920f support all of the required bands for LTE on at&t. We've discussed this at length here ---> http://forum.xda-developers.com/att...s-unlocked-t3067580/post60601427#post60601427
Related
Since the whole device is same will there be any issues if i do it will i face any radio issues?
One way to find out...flash it.
The whole device is not the same. There are some different LTE bands on the phones aren't there?
Japultra said:
The whole device is not the same. There are some different LTE bands on the phones aren't there?
Click to expand...
Click to collapse
actually india still doesnt have lte so will it matter?
bhavstech said:
actually india still doesnt have lte so will it matter?
Click to expand...
Click to collapse
Bro India has LTE and I'm using LTE on Airtel in Hyderabad. So are my friends in Bangalore.
Last I checked these cities are still a part of India :silly:
n.praveen13 said:
Bro India has LTE and I'm using LTE on Airtel in Hyderabad. So are my friends in Bangalore.
Last I checked these cities are still a part of India :silly:
Click to expand...
Click to collapse
only airtel no other carrier has it
bhavstech said:
only airtel no other carrier has it
Click to expand...
Click to collapse
Add aircel to that list too
http://techbee.in/4g-availability-in-india-network-coverage-city-state-wise-areas.html
bhavstech said:
actually india still doesnt have lte so will it matter?
Click to expand...
Click to collapse
Technically, it should matter because of the different hardware.
In Brazil, the model sold is the same 920i - which by the way doesn't stand for Indian.
I know people who have installed the Xtrestolite 2.0 which is 5.1.1 for F and T models. The only things that happened is that they can't use the fingerprint scanner or connect to LTE...
xapoliz said:
In Brazil, the model sold is the same 920i - which by the way doesn't stand for Indian.
I know people who have installed the Xtrestolite 2.0 which is 5.1.1 for F and T models. The only things that happened is that they can't use the fingerprint scanner or connect to LTE...
Click to expand...
Click to collapse
wow...so it's a no go for me...the fingerprint and lte are a must for me
Hello guys,
I am currently using my G920i international unlocked on AT&T network, and I would like to know if I can use this device on T-Mobile 4G network without any issue?
Any input would be greatly appreciated
AirSupply said:
Hello guys,
I am currently using my G920i international unlocked on AT&T network, and I would like to know if I can use this device on T-Mobile 4G network without any issue?
Any input would be greatly appreciated
Click to expand...
Click to collapse
Absolutely, just get a T-Mobile SIM ($15 at a T-Mobile store) and go online at T-Mobile.com pick your plan and activate. FYI - the 920I is not international that's the 920F. 920I is region specific North/South America. I use 920I on T-Mobile without issue. Just received Lollipop 5.1.1 update.
Tmobile firmware on g920i
I was wondering, can you put tmobile firmware on the g920i and get tmobile updates on the international version?
Blee08 said:
I was wondering, can you put tmobile firmware on the g920i and get tmobile updates on the international version?
Click to expand...
Click to collapse
No you can't.
I have the sm g920t works flawless on tmo
Sent from my SM-G920T using XDA Free mobile app
Crisisx1 said:
I have the sm g920t works flawless on tmo
Sent from my SM-G920T using XDA Free mobile app
Click to expand...
Click to collapse
Yes because your S6 is the TMO variant SM 920t. If he tried to flash the TMO variant on a 920i variant it will cause a soft brick.
Not sure where a straighttalk s7 follow under the model is sm g930vl
Adaken13 said:
Not sure where a straighttalk s7 follow under the model is sm g930vl
Click to expand...
Click to collapse
The model is a variant of the Verizon Model SM-G930V. I believe the model is also factory unlocked.
does anyone know if this one has b12 (700) to work on at&t?
notslow1 said:
does anyone know if this one has b12 (700) to work on at&t?
Click to expand...
Click to collapse
no it does not have band 12 it has band 2 1900mhz for lte 850 mhz and 1900mhz for 3g
Anyone know if I can turn on band 12 with qpst or other software?
notslow1 said:
Anyone know if I can turn on band 12 with qpst or other software?
Click to expand...
Click to collapse
Flash the SM-G930U firmware with oding and profit.
Hello everyone,
I'm facing a problem with my galaxy s7 when I lock it into WCDMA only I got no network at all , but it works fine on 2G and 4G .
I flashed it with different firmwares but no solution .
Currently I'm using the original firmware
What model is the phone and where are you located?
As the international model (F/FD) and US models (V/T/P) have a different modem and only the US models can access certain radio networks in the US, and I don't believe US model phones have full band coverage outside the US.
So if you're using the international model in the US, or a US model outside of the US you will have coverage issues.
Beanvee7 said:
What model is the phone and where are you located?
As the international model (F/FD) and US models (V/T/P) have a different modem and only the US models can access certain radio networks in the US, and I don't believe US model phones have full band coverage outside the US.
So if you're using the international model in the US, or a US model outside of the US you will have coverage issues.
Click to expand...
Click to collapse
i'm using the model SM-G930F it's international model and i live in algeria , i used different ROMS (Agleria and official ROM H3K) but still the same problem .
thank you .
Was it locally purchased or imported? Might need the CSC for your carrier https://forum.xda-developers.com/galaxy-s7/development/utility-flashable-csc-selection-30-t3392949
Beanvee7 said:
Was it locally purchased or imported? Might need the CSC for your carrier https://forum.xda-developers.com/galaxy-s7/development/utility-flashable-csc-selection-30-t3392949
Click to expand...
Click to collapse
actually it's imported, i took it to different repair shop but no luck
Have you tried flashing with Odin using all 4 files (BL,AP,CP,CSC) that match your country and carrier?
Beanvee7 said:
Have you tried flashing with Odin using all 4 files (BL,AP,CP,CSC) that match your country and carrier?
Click to expand...
Click to collapse
yes i tried that , sadly no luck.
I have a T-Mobile S22 Ultra that I have unlocked, I flashed the T-Mobile variant unlocked firmware on it to get rid of the T-Mobile bloat and splash screen.
I've since switched to Verizon, I haven't changed the firmware. The phone barely gets 5g anywhere and 4g barely works, feels like running on 2g. I am in an area where I have towers very close by for all carriers and this shouldn't be an issue.
We've only been on Verizon a few months and they've screwed up so much, like our billing and so I'm. So we're actually going to switch again to at&t, since it's the only thing that comes in up north where we travel. Would flashing an at&t firmware help with those types of things?
Yes.
Could it be this: https://forum.xda-developers.com/t/ultrawide-band-antenna-failing.4480749/
Ramsi Hartmann said:
Could it be this: https://forum.xda-developers.com/t/ultrawide-band-antenna-failing.4480749/
Click to expand...
Click to collapse
How would I check?
Kris_b1104 said:
Yes.
Click to expand...
Click to collapse
Yeah?
Nickdroid86 said:
How would I check?
Click to expand...
Click to collapse
Different providers use different 5G bands, which is likely why Verizon's 5G isn't working for you on T-mobile firmware. You might have the same problem with AT&T if you don't use At&T firmware.
You are correct that flashing the carrier's firmware will fix your 5G, and that is the simplest solution. You can simply flash Verizon firmware and it should fix 5G for Verizon network. Or flash AT&T firmware if you're using AT&T network.
If you don't want to flash another firmware, you can also unlock all bands to fix 5G on your current firmware by following the guide that @Ramsi Hartmann mentioned.
peacey8 said:
Different providers use different 5G bands, which is likely why Verizon's 5G isn't working for you on T-mobile firmware. You might have the same problem with AT&T if you don't use At&T firmware.
You are correct that flashing the carrier's firmware will fix your 5G, and that is the simplest solution. You can simply flash Verizon firmware and it should fix 5G for Verizon network. Or flash AT&T firmware if you're using AT&T network.
If you don't want to flash another firmware, you can also unlock all bands to fix 5G on your current firmware by following the guide that @Ramsi Hartmann mentioned.
Click to expand...
Click to collapse
Sweet thank you
I don't want to take up a new post for this question. I am trying to find the correct firmware to use now that my t-mobile S22 Ultra is on the T-Mobile network. Can anyone link me please and thank you?
Nickdroid86 said:
I have a T-Mobile S22 Ultra that I have unlocked, I flashed the T-Mobile variant unlocked firmware on it to get rid of the T-Mobile bloat and splash screen.
I've since switched to Verizon, I haven't changed the firmware. The phone barely gets 5g anywhere and 4g barely works, feels like running on 2g. I am in an area where I have towers very close by for all carriers and this shouldn't be an issue.
We've only been on Verizon a few months and they've screwed up so much, like our billing and so I'm. So we're actually going to switch again to at&t, since it's the only thing that comes in up north where we travel. Would flashing an at&t firmware help with those types of things?
Click to expand...
Click to collapse
Call Verizon and have them do a reprovison of the phone.. I had this issue when switching from Sprint to T-Mobile, when Sprint was around.. I had terrible cell, and data service in areas where I should not have.. After it was done everything went smooth not a single issue since.
Nickdroid86 said:
I don't want to take up a new post for this question. I am trying to find the correct firmware to use now that my t-mobile S22 Ultra is on the T-Mobile network. Can anyone link me please and thank you?
Click to expand...
Click to collapse
This is the correct T-Mobile firmware: https://www.sammobile.com/samsung/galaxy-s22-ultra/firmware/SM-S908U1/TMB/
Download the latest one and flash it with Odin.
peacey8 said:
This is the correct T-Mobile firmware: https://www.sammobile.com/samsung/galaxy-s22-ultra/firmware/SM-S908U1/TMB/
Download the latest one and flash it with Odin.
Click to expand...
Click to collapse
Wouldn't I need an AT&T one now so that the bands and everything work correctly?
Nickdroid86 said:
Wouldn't I need an AT&T one now so that the bands and everything work correctly?
Click to expand...
Click to collapse
Yes if you're on AT&T. But you said you're on T-Mobile and wanted that one?
Anyways, here's the AT&T one: https://www.sammobile.com/samsung/galaxy-s22-ultra/firmware/SM-S908U1/ATT/
peacey8 said:
Yes if you're on AT&T. But you said you're on T-Mobile and wanted that one?
Anyways, here's the AT&T one: https://www.sammobile.com/samsung/galaxy-s22-ultra/firmware/SM-S908U1/ATT/
Click to expand...
Click to collapse
Nah, I said I have a t-mobile S22 Ultra on Verizon and was having issues with Verizon and probably going to AT&T. Thank you for the link though I do highly appreciate it.