[ROM] [5.0] Plasma ROM - Verizon Galaxy S 5 Android Development

Welcome to Plasma ROM!
The most frequently updated ROM for this phone!
Note: It is HIGHLY recommended to, after installing this ROM (or any ROM) to use a Battery Calibration app! This almost doubled my battery life, and will likely do the same for you!
Features:
- Based off the newest OC4 firmware for Verizon Wireless
- Debloated
- One of the few ROMs with working SHealth!
- Easy install
- Cool boot animation
- Dark themed using @AL_IRAQI's layers themes
- Android 5.0 Lollipop
- Working SBrowser - much faster than Chrome (and uses less battery power)
- Download booster working out of the box
- Updates every weekend!
- Battery life seems to be amazing
- UPSM works flawlessly
Install instructions:
Prerequisites:
Must have SafeStrap installed
Must have a windows computer on hand with Odin
Must have an external SD card (SafeStrap also requires this)
Must have about 20-30 minutes
1) Download the ROM.
2) Boot into SafeStrap, click "Wipe," click "Advanced Wipe," then select all the boxes except for your external SD card!!!!
3) Click "Install" and select the ROM. Install it. Do not flash the UPDATE-SuperSU.zip! The ROM already has root!
4) Once the ROM is installed, reboot into Download mode.
5) Use Odin to flash the OC4 firmware only tar (link in the Downloads section)
6) Reboot and enjoy!
Please note that the first boot will take anywhere from 5-20 minutes, so be patient!
Known bugs:
- Settings app is slightly laggy. It's still perfectly usable though. I need to zipalign that APK in the next update.
Credits:
- Thanks to jrkruse, I used his OC4 ROM as a base. I also used his themes Settings and Messages apps.
- Thanks to AL_IRAQI, I used his layers themes. (This is the themed notification dropdown and keyboard.)
- Thanks to elliwigy, for answering many questions and for a list of debloatable things.
- Thanks to geohot for root, ChainFire for SuperSU (and FlashFire), and Hashcode for SafeStrap. Without these 3 people, none of these ROMs would be possible.
I would also like to give a HUGE shoutout to Verizon, for locking the bootloaders and doing everything in their power to prevent any of this good stuff from happening.
Downloads:
Plasma ROM v1.0
OC4 Firmware only tar
Questions? Comments? Concerns? Use either the Q&A section of this fourm, or post it in the discussion. You could also PM me if you need to ask me anything that only I can answer. Some required details in problem reports:
The exact steps you took to install the ROM
How many times you reproduced the problem
How I can reproduce the problem
What you want me to do about the problem
Enjoy, and I could use some feedback/suggestions!
XDA:DevDB Information
[ROM] [5.0] Plasma ROM, ROM for the Verizon Samsung Galaxy S 5
Contributors
Nandr0idC0nsumer, Nandr0idC0nsumer, jrkruse, Thanks to elliwigy for a list of apps that are safe to debloat, I used jrkruse's OC4 ROM as a base, and AL_IRAQI, who made the layers themes
ROM OS Version: 5.0.x Lollipop
ROM Kernel: Linux 3.10.x
ROM Firmware Required: Must be on OC4 Firmware - install guide shows how to do this
Based On: TouchWiz based
Version Information
Status: Beta
Created 2015-05-10
Last Updated 2015-05-10

Gonna try this out later, when I get home.

Sweet this has to be my first time trying out a ROM in the beginning. Why is it that your install instructions are sooo much more simple and straight forward than the other ROMs? Also, I'm coming from Ricks Rom 20 - NK2...shouldn't have any issues right? Just a fresh wipe in safestrap? Also, I kind of screwed up my phone trying to upgrade to BOC4 yesterday and ever since, I can't get my WIFI to work. I know that its not pertinent to this thread but I haven't been on here in a while and was hoping for some advice on how to fix that. I'm not sure if I just did a fresh wipe and upgraded to your Rom, or did a kernel flash it will help. Any suggestions are greatly appreciated.

How do you get the weekend updates? I would like to find xposed installer that would work with this rom and also a way to boot into Safestap......... Got any updates for these issues?
---------- Post added at 07:41 AM ---------- Previous post was at 07:39 AM ----------
Seems to work very smooth! I like everything. Just need the options stated above.....

renofreak said:
How do you get the weekend updates? I would like to find xposed installer that would work with this rom and also a way to boot into Safestap......... Got any updates for these issues?
---------- Post added at 07:41 AM ---------- Previous post was at 07:39 AM ----------
Seems to work very smooth! I like everything. Just need the options stated above.....
Click to expand...
Click to collapse
:banghead: not much of a reader huh

Related

[ROM][PORT]★ Note 4 Mini-S6 10.0 KitKat 4.4.2 custom ROM for Samsung Galaxy K Zoom

[ROM][PORT]★ Note 4 Mini-S6 10.0 KitKat 4.4.2 custom ROM for Samsung Galaxy K Zoom
Dear all,
★ Note 4 Mini Rom★ Welcome, this is a custom rom developed by @bulldog74ts, @Gabri™ and @Amit.A. I've ported this ROM to the K-Zoom (SM-C115).
The rom Note 4 Mini, will give your device, an experience of real use of Galaxy S6, thanks to the porting of some functions only, only available on Galaxy S5 and Note 4 and Galaxy S6.
Neither we, neither xda are not responsible for any damage to your device!
To view information about the ROM please go to the following thread: http://forum.xda-developers.com/note-3-neo/development/rom-note-4-mini-t2982138
I've done some modifications to this ROM to make it work on K zoom.
This ROM uses the kernel from @timduru which can be found here: https://github.com/timduru/kzoom-katkernel
Here is his thread: http://forum.xda-developers.com/showthread.php?t=2797146
I've got permission from @Gabri™ to publish this ROM!
This ONLY works with following kernel: [Galaxy K Zoom] [Root] [Kernel] Stock kernel with permanent autoroot
Installation:
1. You need to have battery 50% loaded MINIMUM!! (This allows for a comfortable margin of something fails!)
2. Flash following kernel: http://forum.xda-developers.com/showthread.php?t=2797146
3. Flash CWM recovery: http://downloads.timduru.org/android/kzoom/misc/Tim_KZoom_CWM-6.0.5.0_001.tar.md5
4. Place the ZIP file on the external SD card.
5. Boot into recovery.
5a. Turn off phone.
5b. Hold the power, vol up and home keys together.
5c. If you see Galaxy logo, release the power key.
5d. If you are in recovery, good! If you get black screen, repeat these steps.
6. Do a Backup of your K zoom!
7. Full wipe data! (Do this twice to be sure).
8. Install the zip file from external SD card.
9. During the 1st startup, the ROM will boot twice, just be patient!
10. For really cool theme install following APK: http://forum.xda-developers.com/galaxy-s3/themes-apps/s6-theme-4-4-2launcher-s5-t3187450 And select it from Settings -> Themes
11. Enjoy!!
New version:
Added same camera apps from original ROM, like Photosuggest.
Download link:
https://drive.google.com/file/d/0Bz6384oFZIsuUHhfN3JjdWE2azg/view?usp=sharing
Slim version:
The slim version is the same ROM as above but with most of the Google and Samsung apps removed. Only camera apps (like "Pro suggest market" and "Studio") are still in this version.
Download link slim version:
https://drive.google.com/file/d/0Bz6384oFZIsuc3I1WVRQUzBQZFU/view?usp=sharing
Edited- cleaned up, de-cluttered this excellent thread/work ddaemen is making
Thank you brother.
XDA is solving the issue for not displaying this thread in the K Zoom forum.
For the ROM: you guys mentioned issues with this ROM in the other thread.
Could you please also post it here for the other readers and also so I can reply?
No problems for me as of yet
I like a stripped no garbage bare ROM though..not to many peoples liking but so great for me
Thanks again
The thread is in good place now, thankfully.
I think I'm going to create a second ROM based on my ROM above. This will be the slim version, with all Samsung and Google crap removed.
About the Android 5 port: I tried to port a Android 5 ROM from the Samsung Galaxy Alpha phone. This without success.
In fact: Trying to modify the kernel: I've ruined my efs partition and cannot make calls anymore. (Lost IMEI number).
You can come personally and kick my ass if you want , as I do not have a backup.
I will have to send my phone under warranty for repair but it can take weeks to get it back.
I the meantime I can work on this ROM but all will be untested till I get my phone back, therefore I will not make any major changes.
Edited- cleaned up, de-cluttered this excellent thread/work ddaemen is making
I still can test my ROM because the phone still boots, only issues I have is that I cannot make any calls.
Do you have an overview of what you have removed and added exactly?
I'm currently in the process of making a slim version which is already half the size of my current ROM, but I did not test this yet.
Edited- cleaned up, de-cluttered this excellent thread/work ddaemen is making
I've uploaded a slim version. Please see start post.
ddaemen said:
I've uploaded a slim version. Please see start post.
Click to expand...
Click to collapse
Thank you will try that next , let you know how it goes
Tried this morning quick install of slim,stayed on Samsung logo ..tried again just now,reverted back to full note 4 ROM port and attempted again..same,stays on logo forever
Anyone else tried the slim version with success?
OK, I removed the slim version for now and created a new one.
This time it boots The ZIP is 636 MB in size.
I will try to upload it tomorrow in the evening when this version is OK.
The old slim version was 46 % of the original ROM.
The current slim version is 60 % of the original ROM.
This ROM will work on 3G version of K-Zoom i.e SM-C111.....?? Anyone working on Lolipop ?
Thanks
I'm unsure if it works for that device, I cannot test that. But please try. Make a backup first!
About lollipop: I will try that later. I did already before but ruined my efs partition.
k...I will do that tomorrow....!! (Y)
ddaemen said:
OK, I removed the slim version for now and created a new one.
This time it boots The ZIP is 636 MB in size.
I will try to upload it tomorrow in the evening when this version is OK.
The old slim version was 46 % of the original ROM.
The current slim version is 60 % of the original ROM.
Click to expand...
Click to collapse
Sorry guys, I had not time to upload the slim version yesterday evening. I will do it today.
Just to confirm it's working on SM C-111 (3G Version).....But warning text are invisible....And Random Reboots...!!!
hello
I'm trying to install this rom but unsuccessful on my SM-C115 Kzoom .
I have this error message just after the beginning:
E: wrong footer
E: Wrong signature.
Do you know why ?My Kzoom is SM-C115
saurabhsaurabhrai said:
Just to confirm it's working on SM C-111 (3G Version).....But warning text are invisible....And Random Reboots...!!!
Click to expand...
Click to collapse
When you say, "warning texts are invisible", what do you mean by that? Also how frequent are the reboots. my C-111 locks up frequently on me anyway so maybe it's worth it for the presumed performance boost?

[T350][Deodex][Minimal] HTKO STOCK+ 1.2 [5.0.2][FEB/06/16]

HTKO STOCK+ 1.2 [5.0.2]
What is this rom?
Based on LRX22G T350XXU1AOH2 - 5.0.2 - 12.08.2015 (XAC Canada)
Deodexed, Rooted, Zipaligned, Init.d Support, OTA Disabled
Debloated, Minimal setup - Remaining stock apps replaced with google versions
- Note: 100% touchwiz removal is impossible (please advise me on this)
- Full list of file changes here: http://pastebin.com/XKtgkadM
Instructions only for SM-T350(Tab A 8.0 Wifi no S-Pen): (will trip knox counter)
Flash T350XXU1AOH2 (must be installed - but optional if from a previous ver. of my rom)
Flash then boot into TWRP.
Make nandroid backup.
Wipe system, data, and both caches.
Flash ROM.
Reboot.
Requirements:
T350XXU1AOH2 Firmware: Mega.nz
TWRP for T-350: Here - Credits @ashyx
ROM: Mega.nz
Optional Flash Xposed:
- xposed-v75-sdk21-arm-arter97-snapdragon_requestConcurrentGC.zip & Material Design Xposed installer
Credits:
@SuperR's Kitchen
@Ashyx For TWRP port.
@Shepherder For inspiration and some help.
@Galaxy Tab A Boards For the dedicated device forum.
Thank you!
Thank you for being the first creator of a custom ROM for this device on XDA.
-Have there been any reported bugs yet?
-Is the device any faster (sorry if dumb question)?
-Is there any way to get an actual forum/category open for our device? There currently isn't one and this is posted to miscellaneous because of it, and I almost never found it.
Thank you again :good:
Bump - need a forum please.
Hi 1xinfusion,
Can you deodex USA version firmware for me please? so I can work on custom ROM, I just need full-stock deodexed (nothing removed)..
Here's download link for firmware tar file: T350XXU1AOJ1_T350XAR1AOJ1_HOME.tar.md5
I'll bump you again please update Rom
Sent from my SM-T350 using XDA Free mobile app
jazzespresso said:
Hi 1xinfusion,
Can you deodex USA version firmware for me please? so I can work on custom ROM, I just need full-stock deodexed (nothing removed)..
Here's download link for firmware tar file: T350XXU1AOJ1_T350XAR1AOJ1_HOME.tar.md5
Click to expand...
Click to collapse
I will try to help you out with one, but I do have work to go to so I can't promise anything. Alternatively, download you can use SuperR's kitchen in Ubuntu (VM if you wish) to deodex this rom with no problem.
Vonsk said:
Thank you for being the first creator of a custom ROM for this device on XDA.
-Have there been any reported bugs yet?
-Is the device any faster (sorry if dumb question)?
-Is there any way to get an actual forum/category open for our device? There currently isn't one and this is posted to miscellaneous because of it, and I almost never found it.
Thank you again :good:
Click to expand...
Click to collapse
No, Thank you for support
- No bugs, its essentially stock with touchwiz apps removed or replaced with google version. But let me know !
- It seems just as fast, but with future removal of Knox, I do hear there can be battery and performance increases.
- And lastly, its up to us to petition the moderators / admins. Unfortunately, it seems our device is a little uncommon. I may be wrong though. There is alternative forums run by devs @ http://galaxy-tab-a.boards.net/ and http://galaxy-tab-a.proboards.com
dakunclear said:
I'll bump you again please update Rom
Sent from my SM-T350 using XDA Free mobile app
Click to expand...
Click to collapse
Hello I'm still alive
i have fully deodexed rom
i have fully deodexed his rom without removing any apps and fully working. I am using that about 3 months. 1xinfusion do you want me to just send it so you can update it.
Sweet...
flashed this last night after flashing its stock firmware via fastboot. So far so good... no complaints. Thsnks for your hard work! :good:
http://forum.xda-developers.com/android/development/rom-evervolv-galaxy-tab-sm-t350-t3411150/page1
It is possible to gest pure aosp on this device
Does T350XXU1AOH2 need to be flashed with Odin?
1xinfusion said:
HTKO STOCK+ 1.2 [5.0.2]
What is this rom?
Based on LRX22G T350XXU1AOH2 - 5.0.2 - 12.08.2015 (XAC Canada)
Deodexed, Rooted, Zipaligned, Init.d Support, OTA Disabled
Debloated, Minimal setup - Remaining stock apps replaced with google versions
- Note: 100% touchwiz removal is impossible (please advise me on this)
- Full list of file changes here: http://pastebin.com/XKtgkadM
Instructions only for SM-T350(Tab A 8.0 Wifi no S-Pen): (will trip knox counter)
Flash T350XXU1AOH2 (must be installed - but optional if from a previous ver. of my rom)
Flash then boot into TWRP.
Make nandroid backup.
Wipe system, data, and both caches.
Flash ROM.
Reboot.
Requirements:
T350XXU1AOH2 Firmware: Mega.nz
TWRP for T-350: Here - Credits @ashyx
ROM: Mega.nz
Optional Flash Xposed:
- xposed-v75-sdk21-arm-arter97-snapdragon_requestConcurrentGC.zip & Material Design Xposed installer
Credits:
@SuperR's Kitchen
@Ashyx For TWRP port.
@Shepherder For inspiration and some help.
@Galaxy Tab A Boards For the dedicated device forum.
Click to expand...
Click to collapse
@1xinfusion Can you make this rom for the Marshmallow edition of SM-T350 XAR? (USA not CANADA!) It would be appreciated.
6.0.1?
1xinfusion said:
HTKO STOCK+ 1.2 [5.0.2]
What is this rom?
Based on LRX22G T350XXU1AOH2 - 5.0.2 - 12.08.2015 (XAC Canada)
Deodexed, Rooted, Zipaligned, Init.d Support, OTA Disabled
Debloated, Minimal setup - Remaining stock apps replaced with google versions
- Note: 100% touchwiz removal is impossible (please advise me on this)
- Full list of file changes here: http://pastebin.com/XKtgkadM
Instructions only for SM-T350(Tab A 8.0 Wifi no S-Pen): (will trip knox counter)
Flash T350XXU1AOH2 (must be installed - but optional if from a previous ver. of my rom)
Flash then boot into TWRP.
Make nandroid backup.
Wipe system, data, and both caches.
Flash ROM.
Reboot.
Requirements:
T350XXU1AOH2 Firmware: Mega.nz
TWRP for T-350: Here - Credits @ashyx
ROM: Mega.nz
Optional Flash Xposed:
- xposed-v75-sdk21-arm-arter97-snapdragon_requestConcurrentGC.zip & Material Design Xposed installer
Credits:
@SuperR's Kitchen
@Ashyx For TWRP port.
@Shepherder For inspiration and some help.
@Galaxy Tab A Boards For the dedicated device forum.
Click to expand...
Click to collapse
Is there 6.0.1 for this rom? There is no good rom to use for this tablet....

[ROM][G906S/K/L][7.1.1][BETA][UNOFFICIAL]Mokee NOUGAT for S5 LTE-A

Code:
- Your warrenty is now void.
- You have been warned.
- Use at your own risk.
MoKee OpenSource is based on the Google AOSP. We update our source code frequently to keep up with the latest development, and not forgetting to merge in special features of our own at the same time.
A small group of people from around the world who are interested in Android launched this project on the 12th of December 2012, and is committed to make this ROM better and better. Like most contributors of open source projects (Omni, CyanogenMod, Slim AOSPA etc), we are doing all these in our free time as our passion…
Since this project is open source, anyone interested can participate in the development (maintain new devices, contribute code etc). Newcomers are always welcomed!
Bugs:
You tell me~
Credits:
Google, Qualcomm, Motorola, Samsung, Lge, TI, Nvidia, Intel, Sony,
CyanogenMod, Omnirom, Slim Roms, Koush for open-sourced SuperUser
all klte and kccat6 manitainer and sktjdgns1189
Source:
device tree:
https://github.com/18712886438/android_device_samsung_lentislte
https://github.com/18712886438/android_device_samsung_lentislte-common
kernel:
https://github.com/18712886438/android_kernel_samsung_apq8084
XDAevDB Information
Mokee for S 5 LTE-A, ROM for the Samsung Galaxy S 5 LTE-A
Contributors
CallMESuper
ROM OS Version: 7.1.x Nougat
ROM Kernel: Linux 3.10.x
ROM Firmware Required: MM Bootloader
Based On: AOSP,CyanogenMod
Version Information
Status: beta
Created 2017-01-13
Last Updated 2017-01-13
link here
https://mega.nz/#!rENU1LYT!5PmPqZt2jdd7tBHLy2iBtopVcRzMlCMuK7JhzEvxH88
make sure you have flash stock 6.0 rom or other stock-based rom
not just flash base mokee night 6.0
thx
Ohh..i'm in lollipop.ok i will update firmware to marshmallow and try to flash this rom.can you make custom kernel like jesse kernel in mm rom bro?
We need it for g901f too
Vicky_666 said:
Ohh..i'm in lollipop.ok i will update firmware to marshmallow and try to flash this rom.can you make custom kernel like jesse kernel in mm rom bro?
Click to expand...
Click to collapse
whick kind of kernel ? I mean why donnot u have a flash mokee 7.1 and install kernel adiutor? I think you will find something diffrent .
---------- Post added at 03:54 AM ---------- Previous post was at 03:53 AM ----------
XCMDOS said:
We need it for g901f too
Click to expand...
Click to collapse
I will do it after making sure g906 is almost perfect
This is great! Thanks! looking forward for other coming updates
he's come back ! thanks you
bug: MTP device not work
Thanks you
Quite smooth, MTP bugs and screen rotation bugs. The rotation doesn't always work and it gets fixed into place. Ex) Some how made my screen horizontal but it keeps being horizontal for a long time.
And normal Mokee lags are here but many custom roms have it so... I didn't test bluetooth yet. Someone would have already found out if it had bugs.
Edit: The fingerprint doesn't work
Nice ROM.
LoveLoli said:
Edit: The fingerprint doesn't work
Click to expand...
Click to collapse
fingerprint work fine me . g906s
Looking for good aosp rom
kotobodj said:
fingerprint work fine me . g906s
Click to expand...
Click to collapse
Mine's g906k and does it work for you normally in the settings? It keeps saying that the fingerprint is not set.
Hello. Thank you for bringing this rom to us. I am sure many will appreciate your hard work and persistence that it took to create this work. As it is in beta I have few things that I would like to report:
1) in my case fingerprint sensor is not working as well
2) the phone heats up at normal usage (no internet browsing) and eats up quite a lot of battery
3) wakelocks are present and there seems to be quite a lot of them at the moment. (much worst than stock mm 6.0)
On the flipside I am trying to adjust kernel settings, there are quite few due to it being custom. Any suggestions? At the moment everything seems to be working quite well. Time will tell.
baseband g906sksu1cpf1
LoveLoli said:
Mine's g906k and does it work for you normally in the settings? It keeps saying that the fingerprint is not set.
Click to expand...
Click to collapse
My device G906K and working fine
Thank you ! :good::good::good::good::good:
Thanks for this! The only custom ROM I use for my G906K is Mokee. How is the camera? MK60.1 has the camera flash bug.
Just to give all of you guys a feedback on my findings after playing with the rom. Please do the clean install, I have noticed that installing on top of the old OS will cause Mokee to overheat and give plenty of wakelocks. Do the full system wipe. Lesson learnt here. Somebody asked about the camera.. it works fine, nice and snappy.
After reinstalling as a clean rom, the phone does not heat up, I have not noticed any wakelocks and everything is silky smooth. Just waiting for the Xposed framework to be compiled.
All the best.
rafaleon said:
Just to give all of you guys a feedback on my findings after playing with the rom. Please do the clean install, I have noticed that installing on top of the old OS will cause Mokee to overheat and give plenty of wakelocks. Do the full system wipe. Lesson learnt here. Somebody asked about the camera.. it works fine, nice and snappy.
After reinstalling as a clean rom, the phone does not heat up, I have not noticed any wakelocks and everything is silky smooth. Just waiting for the Xposed framework to be compiled.
All the best.
Click to expand...
Click to collapse
Hey my friend,I have been struggling on the issue that I couldn't install the rom and splash screen loop. I have used different recoveries with newest base. Still,it doesn't work. Any solution please?
Hey, what helped me was to get:
1) latest MM firmware for your phone.
2) Flash it through ODIN. That will remove recovery, so you need to install the one corresponding to MM for your phone.
3) once that is done, you have required MM baseband.
4) put mokee on your SD card.
5) go to recovery, full wipe, format etc.
6) flash mokee
7) wait until its done.
rafaleon said:
Hey, what helped me was to get:
1) latest MM firmware for your phone.
2) Flash it through ODIN. That will remove recovery, so you need to install the one corresponding to MM for your phone.
3) once that is done, you have required MM baseband.
4) put mokee on your SD card.
5) go to recovery, full wipe, format etc.
6) flash mokee
7) wait until its done.
Click to expand...
Click to collapse
yeah thx for ur information. Is that the reason why i cannot flash because of my baseband is the latest one?I flashed G906KKTU1CPL1 for G906K which was released on 3/1/17.
For those who successfully flashed the rom. May you tell me which recovery and base you used?
Thank you so much~~~

SAMSUNG C701F LITE_ROM 7.0 (deodexed/debloated/deknoxed)

LITE ROM​Lite ROM is my first ever ROM project with many help from @sujisurjithshankar there is no big changes in this ROM graphically instead some of the best features that I could get is added into this ROM im just a normal college student who happens to use C7pro
UPDATES AND ROM GUIDE
Updates in this ROM will be as I get any new stuff that are worth adding for like edge features and all. There is no specific reason for the name LITE ROM it just came to my mind and I named it
As per the update comes the naming of the ROM version will be in the following format
vr-<month number>dot<date>BUILD<number of times I made that ROM in that day>
Click to expand...
Click to collapse
This idea was mainly combination of how substratum engine version are named + Linux Ubuntu version naming
PREREQUISITE
Any idea about ROM flashing
Ready to wipe phone now and then if u make mistakes with magisk or xposed
FYI
LITE ROM is won't be updated now and then
Tried to decrease the size of ROM to the minimum and 1.5 was all I could get
If ur expecting many features this is not the ROM
Changelog:
Onedot27BUILD3
force encryption removed by default
root by magisk 15.3 dont expect supersu
added all those things i could do with kitchen tool
floating feature mods by surji
AOD multiple options
speed meter in status bar
and few more things and thats it...
INSTALLATION
Enter into recovery
Wipe everything with advanced wipe select all except external and otg
go back to home and click install
select rom file and then flash it
Reboot
Screenshots in post 2
Haven't made ROM logo nor changed ROM name in settings next update I can fix that
If u see any error in twrp just wipe everything and reboot recovery
Thumbs up is appreciated
Credits:
 @sujisurjithshankar
ASSAYYEDS kitchen @ASSAYYED
DOWNLOAD LINK
https://drive.google.com/uc?id=1CsyjCGL4yN9c1oK-3yc7F3ozCguivysr&export=download
New update
https://drive.google.com/file/d/1JgHbofUaHQ1HXyd6Ty7J_xOM1KY4NJ87/view
WANT ANY BEST DOWNLOAD MANAGER?
Try https://play.google.com/store/apps/details?id=idm.internet.download.manager.plus
Screenshots are modified by me with substratum themes and xposed Frameworks magisk has xposed Frameworks go check it out
Want any help? You can Join our WhatsApp group https://chat.whatsapp.com/9cJICMbiF72IVejI3MR1s0
I can help you in-depth... if I have time
phenodev said:
DOWNLOAD LINK
https://drive.google.com/uc?id=1CsyjCGL4yN9c1oK-3yc7F3ozCguivysr&export=download
WANT ANY BEST DOWNLOAD MANAGER?
Try https://play.google.com/store/apps/details?id=idm.internet.download.manager.plus
Screenshots are modified by me with substratum themes and xposed Frameworks magisk has xposed Frameworks go check it out
Want any help? You can Join our WhatsApp group https://chat.whatsapp.com/9cJICMbiF72IVejI3MR1s0
I can help you in-depth... if I have time
Click to expand...
Click to collapse
@phenodev Great work my friend ! And Thank you for Mentioning me.
Dear C7 Pro ians... Please try this ROM. After all, don't expect much as a custom ROM. Main Focus is the smoothness and speed of ROM.
DEBLOATED : Makes ROM more Lite
DEKNOXED : Security issues and restrictions removed.
DEODEXED : The thing u need. U can flash any stuff u need. No
bootloops.
If do something wrong with the ROM zip and u mess up your phone, the developers aren't the cause. Point to yourselves.
And... Don't ask a dev for the time for next release.....
I think u all will be just happy with this ROM.
Thanks everyone. ??????
New update
https://drive.google.com/file/d/1JgHbofUaHQ1HXyd6Ty7J_xOM1KY4NJ87/view?usp=drivesdk
Any chance to install google camera ported in c7 pro
Is there any chance of porting aosp pie rom or stock tw rom ?
I wish man I'm not the dev actually aosp related is done by Aapav he is busy with his work and so I have no big hopes for anything like that and even if aosp comes there won't be volte too so that's a bummer and btw after Oreo update this project is kinda dead cuz I did all my research to mod Oreo but none works so....that's that
Thank you very much. This ROM perfectly resurrected my phone C7010. After upgrading to Android 8.0, my phone boot loop on the Samsung logo. I thought the motherboard was broken and almost gave up until I saw this post. I try it out, it really works on my phone and the charging problem was fixed.
hrdabc said:
Thank you very much. This ROM perfectly resurrected my phone C7010. After upgrading to Android 8.0, my phone boot loop on the Samsung logo. I thought the motherboard was broken and almost gave up until I saw this post. I try it out, it really works on my phone and the charging problem was fixed.
Click to expand...
Click to collapse
try other roms like eulah
https://forum.xda-developers.com/android/development/eulah-rom-v1-1-c7-pro-5-1-19-t3886994
i use his rom now
phenodev said:
try other roms like eulah
https://forum.xda-developers.com/android/development/eulah-rom-v1-1-c7-pro-5-1-19-t3886994
i use his rom now
Click to expand...
Click to collapse
I have tested this rom, my phone unable to boot, even all versions of Android 8.0 in galaxy-c7-pro discussion thread. Only LITE ROM 7.0 and Lineage 14.1 work on my phone.
LITE ROM 7.0 there is a bug happen on my C7010, WiFi password cann't be save after reboot.
phenodev said:
DOWNLOAD LINK
https://drive.google.com/uc?id=1CsyjCGL4yN9c1oK-3yc7F3ozCguivysr&export=download
New update
https://drive.google.com/file/d/1JgHbofUaHQ1HXyd6Ty7J_xOM1KY4NJ87/view
WANT ANY BEST DOWNLOAD MANAGER?
Try https://play.google.com/store/apps/details?id=idm.internet.download.manager.plus
Screenshots are modified by me with substratum themes and xposed Frameworks magisk has xposed Frameworks go check it out
Want any help? You can Join our WhatsApp group https://chat.whatsapp.com/9cJICMbiF72IVejI3MR1s0
I can help you in-depth... if I have time
Click to expand...
Click to collapse
Download Links are not working

[ROM] [stable] [5.1.1] MRom 2.0 for J100h

I'm not responsible for any demage that this rom did!
MRom v2.0
The goal of this rom is to put as much apps as posible (so you don't have to install gapps and... slow down your device)
(This rom will be developed only for older phones(becuse if you install gapps i will just lag as hell)
Special thanks to:
@notnoelchannel for main rom (5.1.1) https://github.com/NotNoelChannel/android_kernel_samsung_j13g/
old version Kostareka for the main rom! (https://forum.xda-developers.com/t/...nmod-11-microg-for-samsung-galaxy-j1.4284891/) (the rom is modification for cm 11 by Kostareka!)
CM developers
And google (for android)
Any apps dev who's app is in this rom!
Working and not
Working:
WiFi
RIL (Data, Calls, SMS)
GPS
MTP
ADB
Sensors (Screen rotating, etc)
Camera
Internal/External storage
Audio (playback, recording)
Tethering (WiFi, USB, see not working)
Voice Recording
Video (playback, recording)
Everything that's not listed in "Not working"
Not working:
FM radio (removed from the firmware, will implement it soon)
Bluetooth (tethering, connecting to devices, etc)
Offline Charging (boot your phone to twrp and charge (while connecting the cable) or grab an usb cable cut it in half and + to + and - to - on battery and cable )
(taken from @notnoelchannel post)
Kernel Source code
http://[URL]https://github.com/NotNoelChannel/android_kernel_samsung_j13g/[/URL]
Contributors
ROM OS Version: 5.1.1 Lolipop Funfact I was eating a lolipop while i was updating this rom to lolipop
ROM Kernel: idk
Version Information
Status: Stable
Created: 10.06.2023
Last Updated: 11.06.2023
Note:
Pls dont hate me for my english Im dumb and this is my 1st rom that i made myself! (2nd version of it (4.4.4->5.1.1)
Features:
Pou
Greenify
F-Droid
NewPipe
Root explorer (you must root)
custom wallpaper
more will come!
Wanna add apps?
contact me: on email [email protected]
via xda
or in this post in message add app name or apk file (Infected files will be reported!)
Note: old versions are still here
if phone back screens when first (and sometimes in normal) boot this is normal i will try to fix it
Nice work brother, as I see you are new in ROM developing.
Let me give you some advice:
- Use CM12.1 as a base ROM because 4.4.4 is getting discontinued (you can use mine, it has bugs but can use as a daily)
- Install Greenify, this'll save a lot of battery
- Install open-sourced apps as an alternatives for closed-source apps.
For example: Youtube's alternative is NewPipe/SkyTube Legacy
F-Droid is an alternative for Google Play
Also, I'm planning to make a custom kernel for the J1. Can you be a tester if I can ask you?
i want to delete that reply
-
notnoelchannel said:
Nice work brother, as I see you are new in ROM developing.
Let me give you some advice:
- Use CM12.1 as a base ROM because 4.4.4 is getting discontinued (you can use mine, it has bugs but can use as a daily)
- Install Greenify, this'll save a lot of battery
- Install open-sourced apps as an alternatives for closed-source apps.
For example: Youtube's alternative is NewPipe/SkyTube Legacy
F-Droid is an alternative for Google Play
Also, I'm planning to make a custom kernel for the J1. Can you be a tester if I can ask you?
Click to expand...
Click to collapse
I can be a tester But idk if i do the rom on android 5 do I have to do a new thread
Mihot7Forever said:
I can be a tester
Click to expand...
Click to collapse
Thanks!
Mihot7Forever said:
But idk if i do the rom on android 5 do I have to do a new thread
Click to expand...
Click to collapse
No, just edit the thread's name to [ROM] [STABLE] [5.1.1] MRom 1.2 for J100H and release the android 5 build. That's it
notnoelchannel said:
Nah, you'll not have to do a new thread. Just rename the whole thing.
Are you new to this btw? Do you know how to edit threads?
Click to expand...
Click to collapse
Yea I'm green (I'm from Poland) (I'm grean= Jestem w tym zielony= I'm new at it) idk how in english it is. can you post a link to your rom?
Mihot7Forever said:
Yea I'm green (I'm from Poland) (I'm grean= Jestem w tym zielony= I'm new at it) idk how in english it is. can you post a link to your rom?
Click to expand...
Click to collapse
[ROM][STABLE][SM-J100H] CyanogenMod 12.1 for Samsung Galaxy J1
CyanogenMod is a free, community built, aftermarket firmware distribution of Android 5.1.1 (Lollipop), which is designed to increase performance and reliability over stock Android for your device. #include /* * Your warranty is now void. * * I...
forum.xda-developers.com
here you go
Thanks I'm getting back to work I will add those apps you mentioned chceck up in an hour it will be probabli soon
notnoelchannel said:
[ROM][STABLE][SM-J100H] CyanogenMod 12.1 for Samsung Galaxy J1
CyanogenMod is a free, community built, aftermarket firmware distribution of Android 5.1.1 (Lollipop), which is designed to increase performance and reliability over stock Android for your device. #include /* * Your warranty is now void. * * I...
forum.xda-developers.com
here you go
Click to expand...
Click to collapse
Can you help me? how do i set default wallpaper?
Mihot7Forever said:
Can you help me? how do i set default wallpaper?
Click to expand...
Click to collapse
You can't set default wallpaper unless you modify apk's which can lead to many errors
notnoelchannel said:
You can't set default wallpaper unless you modify apk's which can lead to many errors
Click to expand...
Click to collapse
Ok in the version 1.2 i modified apk cmwallpapers but the user MUST set this wallpaper manually
Now im testing the rom on my j100h
Changelog:
Upgraded to Lolipop (5.1.1) Thanks @notnoelchannel
added Greenify
added F-Droid
added NewPipe
also thanks to @notnoelchannel
Mihot7Forever said:
Changelog:
Upgraded to Lolipop (5.1.1) Thanks @notnoelchannel
added Greenify
added F-Droid
added NewPipe
also thanks to @notnoelchannel
Click to expand...
Click to collapse
By the way can you contact me on Discord?
notnoelchannel#8830
notnoelchannel said:
By the way can you contact me on Discord?
notnoelchannel#8830
Click to expand...
Click to collapse
the username is invalid mine: Mihot7#0068
Mihot7Forever said:
I'm not responsible for any demage that this rom did!
MRom v2.0
The goal of this rom is to put as much apps as posible (so you don't have to install gapps and... slow down your device)
(This rom will be developed only for older phones(becuse if you install gapps i will just lag as hell)
Special thanks to:
@notnoelchannel for main rom (5.1.1) https://github.com/NotNoelChannel/android_kernel_samsung_j13g/
old version Kostareka for the main rom! (https://forum.xda-developers.com/t/...nmod-11-microg-for-samsung-galaxy-j1.4284891/) (the rom is modification for cm 11 by Kostareka!)
CM developers
And google (for android)
Any apps dev who's app is in this rom!
Working and not
Working:
WiFi
RIL (Data, Calls, SMS)
GPS
MTP
ADB
Sensors (Screen rotating, etc)
Camera
Internal/External storage
Audio (playback, recording)
Tethering (WiFi, USB, see not working)
Voice Recording
Video (playback, recording)
Everything that's not listed in "Not working"
Not working:
FM radio (removed from the firmware, will implement it soon)
Bluetooth (tethering, connecting to devices, etc)
Offline Charging (boot your phone to twrp and charge (while connecting the cable) or grab an usb cable cut it in half and + to + and - to - on battery and cable )
(taken from @notnoelchannel post)
Kernel Source code
http://[URL]https://github.com/NotNoelChannel/android_kernel_samsung_j13g/[/URL]
Contributors
ROM OS Version: 5.1.1 Lolipop Funfact I was eating a lolipop while i was updating this rom to lolipop
ROM Kernel: idk
Version Information
Status: Stable
Created: 10.06.2023
Last Updated: 11.06.2023
Note:
Pls dont hate me for my english Im dumb and this is my 1st rom that i made myself! (2nd version of it (4.4.4->5.1.1)
Features:
Pou
Greenify
F-Droid
NewPipe
Root explorer (you must root)
custom wallpaper
more will come!
Wanna add apps?
contact me: on email [email protected]
via xda
or in this post in message add app name or apk file (Infected files will be reported!)
Note: old versions are still here
Click to expand...
Click to collapse
Way to go @Mihot7Forever ! ...
Here's something i'd like to share with anyone interested in running almost any J100H CM12.1 ROM on J110H j1pop3g... It's a workaround to make the ROM run on J110H, but for sure you'll find many bugs and lags.. It's a workaround for experimental purposes not for reliability or daily usage.
Get the J100H CM12.1 ROM you wish to run on J110H (like for instance version 2 up here ^^^ ), then add the contents of the zip file attached to the ROM and replace the ones inside... and use the attached boot image file when needed...
Special thanks to @smiley9000 and @notnoelchannel for their efforts, I just collected their work and zipped it in a file!
Antiquillium said:
Way to go @Mihot7Forever ! ...
Here's something i'd like to share with anyone interested in running almost any J100H CM12.1 ROM on J110H j1pop3g... It's a workaround to make the ROM run on J110H, but for sure you'll find many bugs and lags.. It's a workaround for experimental purposes not for reliability or daily usage.
Get the J100H CM12.1 ROM you wish to run on J110H (like for instance version 2 up here ^^^ ), then add the contents of the zip file attached to the ROM and replace the ones inside... and use the attached boot image file when needed...
Special thanks to @smiley9000 and @notnoelchannel for their efforts, I just collected their work and zipped it in a file!
Click to expand...
Click to collapse
after i get back from school i will try
Mihot7Forever said:
after i get back from school i will try
Click to expand...
Click to collapse
I wish you luck!

Categories

Resources