Database Info

Quick Charge 3.0 USB charger for Mi Max 3GB/32GB version

Did you happen to know for Quick Charge 3.0 USB phone charger for Mi Max phone, I was looking for one in eBay and not sure which one will be suitable with Mi Max, if someone is using Quick Charge 3.0 charge, please let me know for it, thanks.

tinkko said:
Did you happen to know for Quick Charge 3.0 USB phone charger for Mi Max phone, I was looking for one in eBay and not sure which one will be suitable with Mi Max, if someone is using Quick Charge 3.0 charge, please let me know for it, thanks.
Click to expand...
Click to collapse
Download the supporting charger list from Qualcomm site.

I use the 18w anker qc 3.0 charger from Amazon, along with a 3m nylon anker USB cable, my Max Prime 128gig charges 0-100 in just over 120mins, The anker plug is 9.99gbp and the cable is 6.99gbp
Sent from my MI MAX using Tapatalk

tinkko said:
Did you happen to know for Quick Charge 3.0 USB phone charger for Mi Max phone, I was looking for one in eBay and not sure which one will be suitable with Mi Max, if someone is using Quick Charge 3.0 charge, please let me know for it, thanks.
Click to expand...
Click to collapse
Check this
qualcomm.com/documents/quick-charge-device-list

kyler084 said:
I use the 18w anker qc 3.0 charger from Amazon, along with a 3m nylon anker USB cable, my Max Prime 128gig charges 0-100 in just over 120mins, The anker plug is 9.99gbp and the cable is 6.99gbp
Click to expand...
Click to collapse
I think your charger is more slow than the European stock
---------- Post added at 01:49 AM ---------- Previous post was at 01:48 AM ----------
Preshak said:
Download the supporting charger list from Qualcomm site.
Click to expand...
Click to collapse
I was thinking to buy a tronsmart QC 3.0 quick charger. Maybe u should too

but does 3/32 version support QC?

bonya1423 said:
but does 3/32 version support QC?
Click to expand...
Click to collapse
Yes this version supports 3.0 quick charging

Is there any official QC 3 charger for Mi Max available in india ? or something from other mainstream phone manufacturers that could be used with Mi Max ?

I am using my old Galaxy Note 4 charging brick with the Mi Max cable included in the box and charging speed is great on both official MIUI ROM or Validus ROM, 2360 mAh

I've been using an Aukrey Qualcomm 3.0 Quick Charger with my mi max; charges it up from 2℅ to 100℅ within 25-30 minutes, which is quite impressive regarding the fact that it bears one of the largest batteries(4850mAh) in the smartphone market.
So, you should opt for this particular one........i guess?

I got Tronsmart and its working great, and it was listed in Qualcomm pdf.

I read about that quick charge 2.0 charges as fast as quick charge 3.0 , the difference is that QC 3.0 allows wider selection of voltages , so the main difference is not speed but compatibility . Does someone using QC 2.0 and what times do you get from 1-2% to 100% ? In my town there is only QC 2.0 on store and i dont want to order online and wait weeks

firkosa said:
I read about that quick charge 2.0 charges as fast as quick charge 3.0 , the difference is that QC 3.0 allows wider selection of voltages , so the main difference is not speed but compatibility . Does someone using QC 2.0 and what times do you get from 1-2% to 100% ? In my town there is only QC 2.0 on store and i dont want to order online and wait weeks
Click to expand...
Click to collapse
I guess not much a difference, I am using Quick Charge 1.0 (Galaxy Note 4 charging brick) and the charging speed is decent. So I guess the difference will be very few minutes that is negligible in real life IMO
https://forum.xda-developers.com/showpost.php?p=70521049&postcount=9

I ordered Anker wall charger 3.0 and 2.0
I'll try it and see what will give me with Ampere app

Yaz S.H. said:
I've been using an Aukrey Qualcomm 3.0 Quick Charger with my mi max; charges it up from 2℅ to 100℅ within 25-30 minutes, which is quite impressive regarding the fact that it bears one of the largest batteries(4850mAh) in the smartphone market.
So, you should opt for this particular one........i guess
Click to expand...
Click to collapse
are u sure??within 30minute??

StonebridgeGr said:
I was thinking to buy a tronsmart QC 3.0 quick charger. Maybe u should too
Click to expand...
Click to collapse
+1, Using tronsmart QC 3.0 on hydrogen and helium and it works perfectly.

With Tronsmart QC 3.0 : from %30 to %100 in 2hrs and 9min
not like the original charger +heating up+

For me. With the tronsmart w1ct I get 90% with 2 hours charging.. so it's slow

Yaz S.H. said:
I've been using an Aukrey Qualcomm 3.0 Quick Charger with my mi max; charges it up from 2℅ to 100℅ within 25-30 minutes, which is quite impressive regarding the fact that it bears one of the largest batteries(4850mAh) in the smartphone market.
So, you should opt for this particular one........i guess
Click to expand...
Click to collapse
i dont think that there is a charger out there that can charge Mi Max from 2% to 100% in 25-30 mins ..
---------- Post added at 11:37 PM ---------- Previous post was at 11:36 PM ----------
Sir Mohd said:
With Tronsmart QC 3.0 : from %30 to %100 in 2hrs and 9min
not like the original charger +heating up+
Click to expand...
Click to collapse
for me, with tronsmart wc1t from 2 % to 100% 2 hours and 10 mins :/

My Tronsmart W3PTA charges Mi Max battery from 5% to 50% for 30 minutes

Honor 6x charger related.

Is it ok to use 5v and 3.4 amp approximately 17.5 watts output charger to charge my honor 6x bln-l21 model? Or it will damage my battery life. I have tested it it charge my mobile but I want to know that it would b ok to charge my mobile with it? Company recommendation is 9v 2amp output charger.
Please help me thanks in advance.

Noman.pezu said:
Is it ok to use 5v and 3.4 amp approximately 17.5 watts output charger to charge my honor 6x bln-l21 model? Or it will damage my battery life. I have tested it it charge my mobile but I want to know that it would b ok to charge my mobile with it? Company recommendation is 9v 2amp output charger.
Please help me thanks in advance.
Click to expand...
Click to collapse
Its better to use stock charger came with ur phone more faster u charge ur phone more fast its life decreases
Sent from my BLN-L22 using Tapatalk

Noman.pezu said:
Is it ok to use 5v and 3.4 amp approximately 17.5 watts output charger to charge my honor 6x bln-l21 model? Or it will damage my battery life. I have tested it it charge my mobile but I want to know that it would b ok to charge my mobile with it? Company recommendation is 9v 2amp output charger.
Please help me thanks in advance.
Click to expand...
Click to collapse
I think you should use stock charger....
Otherwise it will decrease the life of your battery..also can decrease your battery backup..

But the company said it supports fast charging upto 18 watts. And the one I talking about is 17.5 watts charger. Also the stock charger came with smart phone charges very slow 3.30 hour to be fully charged.

Noman.pezu said:
But the company said it supports fast charging upto 18 watts. And the one I talking about is 17.5 watts charger. Also the stock charger came with smart phone charges very slow 3.30 hour to be fully charged.
Click to expand...
Click to collapse
who told u it supports fast charging....it doesn't as far as i know....5v 2A - 10W is max for our phone...

sreekantt said:
who told u it supports fast charging....it doesn't as far as i know....5v 2A - 10W is max for our phone...
Click to expand...
Click to collapse
I read it somewhere from a reply by huawei customer support... they said in reply that you should use 9V 2A output charger.

Noman.pezu said:
I read it somewhere from a reply by huawei customer support... they said in reply that you should use 9V 2A output charger.
Click to expand...
Click to collapse
It may damage in long term but now a days batteries are designed in such a way that they will suck only power as per there design and architecture. Even if you use 10A charge it may damage but battery will just use the rated power it designed for. It wont accept entire 10A.
You may use 9V/2A charger..if using high rated one, it will just make little difference not charge in half time

Thank you all for your reply and your precious time...

Read this http://batteryuniversity.com/learn/article/how_to_prolong_lithium_based_batteries when you'll have 10 minutes like to dedicate on reading these declarations on li-po batteries, to understand better good and bad points that rotates about fast charging personally i never used it, it'd be possible through a custom kernel but in my case, 40-50 minutes to obtain a 40% (that is also what i use daily, more or less...) is more than enough.

RedSkull23 said:
Read this http://batteryuniversity.com/learn/article/how_to_prolong_lithium_based_batteries when you'll have 10 minutes like to dedicate on reading these declarations on li-po batteries, to understand better good and bad points that rotates about fast charging personally i never used it, it'd be possible through a custom kernel but in my case, 40-50 minutes to obtain a 40% (that is also what i use daily, more or less...) is more than enough.
Click to expand...
Click to collapse
I will read it... Thank you

Noman.pezu said:
I will read it... Thank you
Click to expand...
Click to collapse
No problem dude

Fast battery charging coming with Oreo?

https://www.reddit.com/r/Xiaomi/comments/7luq2l/fast_charging_is_coming_on_mi_a1_with_oreo_update/

Don't mistake that for Qualcomm QuickCharge 3.0. That just means it is charging at 5v/2A. The phone already does that when paired with a good charger and cable.

goofball2k said:
Don't mistake that for Qualcomm QuickCharge 3.0. That just means it is charging at 5v/2A. The phone already does that when paired with a good charger and cable.
Click to expand...
Click to collapse
check this out: https://telecomtalk.info/mi-a1-android-8-0-oreo-beta-hands-on/171866/amp/

santr33 said:
check this out: https://telecomtalk.info/mi-a1-android-8-0-oreo-beta-hands-on/171866/amp/
Click to expand...
Click to collapse
Let's do some calculations
3000mAh battery
2000mA charger
That gives about 1.5hrs or so to charge. If we factor in 20% additional time, just because it slows down the charge rate at about 90% or so, then we come in around 1.8hrs. That's not that far off from what the user noticed, and if the phone is off the whole time during charging, then there is no additional battery use from radio/wifi/apps.
Not to say that they didn't implement some other thing with Oreo but definitely it is not QC 3.0 charging.

its still same.... no change at all
Sent from my Mi A1 using Tapatalk

[CONFIRMED] .152 Firmware Update ENABLE QC 3.0 Fast Charging.

EDIT : Confirmed. This phone support QC 3.0 now.
Come a bit as surprise,
Updated my P20 Pro C636 to .152 Firmware,
And noticed right away that now IT DETECT my QC 3.0 battery pack charger as Fast Charge (Two Thunder Icon Appear) and it charge with High Current,
Someone who already on .152 and have QC 3.0 charger in their belonging might want to test it as well.
But anyway, this is good addition for me. Since now i can have one battery pack to fast charging all my phones.
Bellow i attached the picture

otonieru said:
Come a bit as surprise,
Updated my P20 Pro C636 to .152 Firmware,
And noticed right away that now IT DETECT my QC 3.0 battery pack charger as Fast Charge (Two Thunder Icon Appear) and it charge with High Current,
Someone who already on .152 and have QC 3.0 charger in their belonging might want to test it as well.
But anyway, this is good addition for me. Since now i can have one battery pack to fast charging all my phones.
Bellow i attached the picture
Click to expand...
Click to collapse
I have 70% of battery and it says 1 hour 30 to full the battery capacity
with wall quick charger with usb3 cable type or with original huawei cable
what about you?

xn3m said:
I have 70% of battery and it says 1 hour 30 to full the battery capacity
with wall quick charger with usb3 cable type or with original huawei cable
what about you?
Click to expand...
Click to collapse
By "wall quick charger" is it QC 3.0 ? Or 2.0 or standard fast charger ?
Because this phone wasn't meant to support QC standard to begin with, and supposed only work with Huawei Proprietary Supercharge technology, thats why i quite surprise when it now show it as fast charging when am using my QC 3.0 charger.
How many Thunder icon you see next to the battery when you charge ?
And, are you on .152 as well ?

*double post* crappy connection. and this xda app been slow like, for months

*triple post* *geez* crappy connection. and this xda app been slow like, for months

otonieru said:
By "wall quick charger" is it QC 3.0 ? Or 2.0 or standard fast charger ?
Because this phone wasn't meant to support QC standard to begin with, and supposed only work with Huawei Proprietary Supercharge technology, thats why i quite surprise when it now show it as fast charging when am using my QC 3.0 charger.
How many Thunder icon you see next to the battery when you charge ?
And, are you on .152 as well ?
Click to expand...
Click to collapse
Qc3.0 wall charger
Check my screenshot
I m on. 152
I have two thunder
I did have the save behavior with. 134

xn3m said:
Qc3.0 wall charger
Check my screenshot
I m on. 152
I have two thunder
I did have the save behavior with. 134
Click to expand...
Click to collapse
I see,
i never got .134 on C636
but means it confirm that it works with QC 3.0 charger now, which is a good news for everyone.
less kind of charger to buy. since one will do now.
thx for confirming it
i just checked with voltmeter as well, and it indeed charge on 9V as well

Not to burst the bubble but fast charge through Huawei's own charge gives up to 4.5A, yours only gets 2.5A and that's not fast charge but possible quick charge that Qualcomm uses.

Jake.S said:
Not to burst the bubble but fast charge through Huawei's own charge gives up to 4.5A, yours only gets 2.5A and that's not fast charge but possible quick charge that Qualcomm uses.
Click to expand...
Click to collapse
Yes, that i know. LoL
but prior to this, even using QC 3.0 charger will only give me less than 2A, since it only act as normal fast charging,
so, this might be not doing any miracle,
but at least now i know my QC charger will fast my phone faster than it previously does.

xn3m said:
I have 70% of battery and it says 1 hour 30 to full the battery capacity
with wall quick charger with usb3 cable type or with original huawei cable
what about you?
Click to expand...
Click to collapse
i don't have mine on me, but that doesn't sound right at all. even from a dead phone, i think i'm fully charged in under 2hrs, maybe 90 minutes

bravo261 said:
i don't have mine on me, but that doesn't sound right at all. even from a dead phone, i think i'm fully charged in under 2hrs, maybe 90 minutes
Click to expand...
Click to collapse
That calculation on the screen is innacurate for most of the time. Because it fluctuate often.
And since his battery is on 70 its normal that the charger doesnt supply full current/volt,
That just how it designed.
And you are right,
For most of the case, our phone will be fully charged in around 2 Hrs using supplied charger

Stock Huawei charger includes both supercharged capable adapter, and cable (look for purple ends)
Outputs 2A, 5A, 4.5A

Uhmm that's interesting.
I resumed my old powerbank I used for my old nexus 6p, it's a Tronsmart and it claims to be QC 3.0
Fast charge was working with 6p, I plugged in the p20 pro and I don't get your results.
I'm on c636 152, charge is still normal.
I don't know if the powerbank lies, or the cables, but I tried different ones.
What cable did you use?

mangusZen said:
Uhmm that's interesting.
I resumed my old powerbank I used for my old nexus 6p, it's a Tronsmart and it claims to be QC 3.0
Fast charge was working with 6p, I plugged in the p20 pro and I don't get your results.
I'm on c636 152, charge is still normal.
I don't know if the powerbank lies, or the cables, but I tried different ones.
What cable did you use?
Click to expand...
Click to collapse
QC 3.0 cable or USB PD C to C cable. Both works

I have a QC3. 0 battery bank and it doesn't fast charge my phone.
I'm on 152.

How can I update my p20 pro to the latest version while keeping all my data and stuff?
Once I done this I can confirm this for you guys as I have a current and voltage meter which I can use to confirm that it is indeed charging at QC3.0 speeds.

lambstone said:
How can I update my p20 pro to the latest version while keeping all my data and stuff?
Once I done this I can confirm this for you guys as I have a current and voltage meter which I can use to confirm that it is indeed charging at QC3.0 speeds.
Click to expand...
Click to collapse
yes you keep everything

xn3m said:
yes you keep everything
Click to expand...
Click to collapse
I was actually asking how can I update to this.

I don't get the double charge icon even with the default charger, I don't know where it comes from

lambstone said:
I was actually asking how can I update to this.
Click to expand...
Click to collapse
Go to MangusZen HurUpdater thread. That thread have all info you need.

Qualcomm quick charger 4 supported?

Do anyone know does nex support Qualcomm quick charge 4?

no it does not, i think it just support up to QC 2.0 since they are using their own charging tech

I'd say it supports QC3, my Nex charges from 5% to 100% in about an hour, maybe 80 minutes tops

thewildwind said:
I'd say it supports QC3, my Nex charges from 5% to 100% in about an hour, maybe 80 minutes tops
Click to expand...
Click to collapse
Which version do you own? I own the global version, stock charger is 5V 2A, I've tried my QC 3.0 charger, but doesn't charge faster.

Valeriuz said:
Which version do you own? I own the global version, stock charger is 5V 2A, I've tried my QC 3.0 charger, but doesn't charge faster.
Click to expand...
Click to collapse
I have the global version too with a QC 3.0 charger. Never actually used the stock charger but the times listed stand.
If you want I can measure them next time I charge

thewildwind said:
I have the global version too with a QC 3.0 charger. Never actually used the stock charger but the times listed stand.
If you want I can measure them next time I charge
Click to expand...
Click to collapse
Yes, please let me know if you discover any differences between stock charger and a QC charger.

people already did it , no matter what quick charge tech, max you can get 9-10w, only with vivo chager can get 20w, doesn't really work with pd or qc4.0