I have a Galaxy S4 (SGH-M919V) which is the Canadian Variant (Wind/Mobilicity). I used Cyanogenmod Installer and it identified my phone as jfltecan (Canadian Variants) which is good, it got my phone rooted and CM on it but it was KitKat and CM didn't support Lollipop on jfltecan.
Therefore, I manually flashed a jfltetmo (T-Mobile) nightly-may-1st which is similar to SGH-M919V by opening up the script update file and getting rid of the "assert" code that checks if you have the correct phone and correct file. I have SGH-M919V phone and jfltetmo file. was successful and got 5.1.1 Lollipop and my sim working. Few days later, now there's multiple nightlies and I try to use the built in updater to get the most recent nightly. I download it and tap to install it, it takes me to CWM recovery, and displays the following. (Problem #1)
Finding update package...
E: unknown volume for path [@/cache/recovery/block.map]
E: Can't mount @/cache/recovery/block.map
Installation aborted.
Rebooting...
That didn't work but I had that installation zip file downloaded therefore I went to recovery and manually installed it, is displayed the following. (Problem #2)
Finding update package...
Opening update package...
Installing update...
This package is for device: jfletmo, jflte; this device is jfltecan.
(Status 7)
Installation aborted.
The status 7 can be fix by opening up the script update file and removing "assert" code but I don't want to do that for every nightly I will install. Can anyone help me to a solution to problem 1 and 2 or at least one of them. I would really absolutely appreciate it. Thank You.
Hi, thank you for using XDA Assist. I suppose you could edit your build.prop on your device to show the product and device that's listed in the assert line of the rom's updater.script. But be careful as flashing stuff not for your specific device can brick it.
Thread closed.
Related
I'm new to rooting and installing custom roms. I used unrevoked 3 to root my ego, then I created an nandroid and wipe my phone. Next, I rebooted the phone to download the free version of ROM manager from the market. I used the ROM manager to download cyanogenmod 6 (stable). After downloading the rom, I did as the screen prompted me and wipe the phone and created a backup. From here the installation process begins and end with
Welcome to Cyanogenmod 6.0.0-supersonic assert failed: getprop ("ro.bootloader")="0.76.2000"//9.000"
E: Error in /sdcard/clockwork/download/mirror.kanged.net/cm/stable/supersonic/update-cm-6.0.0-supersonic-signed.zip
I haven't a clue what to do at this point.
Can someone please help?
"E: Error in /sdcard/clockwork/download/mirror.kanged.net/cm/stable/supersonic/update-cm-6.0.0-supersonic-signed.zip"
Read this link, I think it is about the same problem.
http://www.actuarialoutpost.com/actuarial_discussion_forum/showthread.php?t=195406&page=46
If I still can not post a link cause I am new, then I googled this:
mirror.kanged.net/cm/stable/supersonic/update-cm-6.0.0-supersonic-signed.zip"
I got three hits, read the first one "maybe we need and android tweeking ...."
Also check this out. I am tempted to say you downloaded the link to the actual file that you want and not the file. Here is the link to the actual file.
http://mirror.kanged.net/cm/stable/supersonic/update-cm-6.0.0-Supersonic-signed.zip
Click that link and then you download the file you need.
Ref:
http://androidforums.com/evo-4g-all-things-root/175655-cyanogen6-link.html
hey,
thanks for trying to help. I'm still having the same problem.
No app2sd partition found. Skipping format of /sd-ext. (is this the problem?????)
--Installing: SDCARD: /clockworkmod/download/mirror.kanged.net/cm/stable/supersonic/update-cm-6.0.0-supersonic-signed.zip
Finding update package...
Opening update package...
Installing update...
Welcome to Cyanogenmod-6.0.0-Supersonic!
assert failed: getprop("ro.bootloader") =="0.76.2000"
getprop("ro.bootloader")=="0.79.0000"
E: Error in /sdcard/clockworkmod/download/mirror.kanged.net/cm/stable/supersonic/update-cm-6.0.0-Supersonic-signed.zip
(status 7)
Installation aborted.
/tmp/recovery.log was copied to /sdcard/clockworkmod/recovery.log. Please open ROM Manager to report the issue
PLEASE HELP....
Hello
Several days ago, there is notif that new firmware available to downloaded, so i downloaded via setting>about device>check for update or whatever it is,(its on indonesian language so i dont know the exactly meaning in english )
The download finish, then i click install on complete download notif. And my device go to cwm recovery
The problem start here, it says signature verification failed, i reboot and install newest cwm recovery v6.x.x.x, start to redownload the firmware just like before and copy the update.zip from root/cache/fota (the firmware is big enough for my poor internet network, about 400mb, so if my next install error again, i can simply reinstall update.zip without download again ang again)
On cwm recovery, i install the update.zip within disabled signature verification, but new problem appear
Below is the log of my error
Finding update package...
Opening update package...
Installing update...
Verifying current system...
assert failed: apply_patch_check ("/system/lib/libGLESv1_CM.so". "ed4c783blablabla
E:error in sdcard/update.zip
Installation aborted
Any issue how to fix that ??
Sorry if my english bad and im newbie on android:silly: so i dont know deeply about android system
PS. My galaxy tab p3100 in on rooted status
This problem was solved. I tried flashing a leaked android 4.4 fxz and it worked so i no longer have this issue.
see ht tp://forum.xda-developers.com/showthread.php?p=48803296#post48803296 for information.
Hi, I'm using a Droid Mini so I'm pretty sure that I can post here.
I have tried to manually download the kitkat update zip from a topic on this forum and flash it using the stock recovery tool.
However, when i do this, the console prints :
Code:
qe 1/1
-- Install /data/media/0 ...
Finding update package...
Opening update package...
Verifying update package...
Installing update...
[B]Verifying current system...
"/modem/image/dsps.b00" has unexpected contents.
Installation aborted.[/B]
I was wondering how to fix this problem because my OTAs are not working and even a manual flash is working. Now i have to try sideload. I can only hope that THIS works.
Hi there, if anyone could help me get through this installation, it'd be greatly appreciated.
I'm a newbie at flashing, but not a newbie with computers.
I'm trying to flash CM 11S v1.5 but have run into numerous issues. I'm running CWM, have updated bootloader (HHZ11K), and my drivers are on point.
Right now, I'm trying to have it install from the zip in the root directory, and it won't install:
"E:Can't open ... (bad)
Installation aborted."
If I toggle signature verification, it says:
"Finding update package ...
Opening update package...
Verifying update package...
E:footer is wrong
E:signature verification failed"
What am I doing wrong?
Bad means corrupt. Re-download
Sent from my Nexus 5 using Tapatalk
Hello everyone,
First of all thanks for being such a great community. I've been a silent reader for a while (since the HTC M7) and am amazed by the community
Now, I can't cope with being stuck on this issue anymore so I turn to you for ideas.
The situation:
I have a dual sim 128gb HTC U11 (I got it in Hong Kong but I assume it's the India version as per the build numbers I've been through and the CID is 060)
S-ON
Bootloader Unlocked
Stock 2.42.400.2 Firmware
TWRP Recovery
Magisk root
So a fairly simple setup.
The issue: We're in 2020 and I'm on Android 8.0.0. Checking for updates doesn't show anything at all although there are already updates
2.42.400.2 -> 2.42.400.6
2.42.400.6 -> 2.42.400.7
2.42.400.7 -> 3.35.400.1 (this is my goal, at least be on Android 9
So usually to update or apply an OTA which I would download from androidfilehost or another source here in a topic I would
1. Uninstall root from within the Magisk app
2. Flash stock recovery for my version back on
3. Put the OTA zip file on an microsd card and pop it in
4. update via stock recovery "apply update from sd"
Now that sadly didn't work. I tried adb sideloading the OTA zip file, but came to the same result below: (I had to hand type it off the screen so excuse any typos)
Code:
E:Failed to parse build number in post-build-incremental=1011554.6
E:Failed to parse build number in pre-build-incremental=1011554.2
O80CT.01.001.009
Source: htc/ocndugl_00400/htc_ocndugl:8.0/0/0/OPR6.170623.013/1011554.2:user/release-keys
Target: htc/ocndugl_00400/htc_ocndugl:8.0.0/OPR6.170623.013/1011554.6:user/release-keys
Verifying current system…
E:eek:riginal error message E1000: is set, why set another again?
E1000: system partition has unexpected contents
E:Error in /sideload/package.zip (Status 7)
Installation aborted
Any help is appreciated. I tried searching the forums for solutions but couldn't the same case.
Thanks and stay healthy everyone!