Hey guys,
I've been using this website as reference for years but never had an issue I hadn't already seen asked.
I've been looking for weeks for a solution to this and haven't found anything.
I tried to flash cm10.1 over my stock 4.1.2 and corrupted the system.
It was booting directly to AP Fastboot and showing an error about not calling the ROM properly.
I tried reflashing using RSD Light 5.7 but every time it tried to flash the system it said the phone returned failed.
So I upgraded RSD to v6.1 and tried again. This time the phone says it flashed properly but it freezes during the droid boot logo.
I've tried using the utility and it gives me the same results.
I can get into factory recovery and I've performed several hard resets. But the phone still freezes whenever it tries to load the system.
I'm using a Motorola Factory Cable on a high speed USB port.
Any ideas why I'm stuck in a soft brick that I can't flash out of?
ShiningRaven said:
Hey guys,
I've been using this website as reference for years but never had an issue I hadn't already seen asked.
I've been looking for weeks for a solution to this and haven't found anything.
I tried to flash cm10.1 over my stock 4.1.2 and corrupted the system.
It was booting directly to AP Fastboot and showing an error about not calling the ROM properly.
I tried reflashing using RSD Light 5.7 but every time it tried to flash the system it said the phone returned failed.
So I upgraded RSD to v6.1 and tried again. This time the phone says it flashed properly but it freezes during the droid boot logo.
I've tried using the utility and it gives me the same results.
I can get into factory recovery and I've performed several hard resets. But the phone still freezes whenever it tries to load the system.
I'm using a Motorola Factory Cable on a high speed USB port.
Any ideas why I'm stuck in a soft brick that I can't flash out of?
Click to expand...
Click to collapse
Format system via any of the custom recoveries before flashing your new ROM - this will wipe out any leftover problems completely & should let you start 100% fresh with a new ROM.
tzlot said:
Format system via any of the custom recoveries before flashing your new ROM - this will wipe out any leftover problems completely & should let you start 100% fresh with a new ROM.
Click to expand...
Click to collapse
I lost my root when I originally got stuck in fastboot. And I can't boot up the phone until I can get it fixed.
ShiningRaven said:
I lost my root when I originally got stuck in fastboot. And I can't boot up the phone until I can get it fixed.
Click to expand...
Click to collapse
Can you get back into fastboot now? If so
Use fastboot to flash a custom recovery (CWM, TWRP or OUDHS)
use the recovery to factory reset, wipe cache/dalvic, AND format system (sometimes in the advanced menu)
then flash rom of your choice.
If you can't get fastboot working you'll need smarter help than I can give you... but the format system step clears out all kinds of gremlins.
I can get into fast boot but I don't have an unlocked boot loader to flash anything custom.
ShiningRaven said:
I can get into fast boot but I don't have an unlocked boot loader to flash anything custom.[/QUOTE
If you can get into fastboot then you should be able to unlock b/l with this toolkit I used it and it worked for me you can also flash rom with it its in the orginial development thread
http://forum.xda-developers.com/showthread.php?t=2154995
Click to expand...
Click to collapse
ShiningRaven said:
So I upgraded RSD to v6.1 and tried again. This time the phone says it flashed properly but it freezes during the droid boot logo.
I've tried using the utility and it gives me the same results.
I can get into factory recovery and I've performed several hard resets. But the phone still freezes whenever it tries to load the system.
I'm using a Motorola Factory Cable on a high speed USB port.
Any ideas why I'm stuck in a soft brick that I can't flash out of?
Click to expand...
Click to collapse
Had the same problem after a fastboot via the utility. Try powering your phone down completely and leaving it off for about 5-10 min. This can be tricky with the hardware buttons so if you have access to TWRP that will help as it has a power off option. You might also try flashing again via the utility. I believe that's what I had to do, but the power down method is what a friend suggested based of his experience with the same exact problem you documented.
FIXED!!!
OK first I want to thank everybody who responded. I got tied up with work and kind of forgot about this project for a few days.
Repeated uses of the Utility and RSD both left me stuck with the phone freezing every time it tried to load the system into memory.
I had checked out the toolbox before but I didn't think I could do much from a locked bootloader.
After your suggestion jmcdonald I tried it again. It says my device isn't available to be unlocked so I tried downgrading back to ICS.
The toolbox says that it failed but it must have fixed something because the phone booted back up to android 4.1.2 stock!
So far I have bricked a lot of phones and learned a lot about ADB in the process of fixing them but I've never had one I was so certain was bricked permanently. But now it seems to be working fine, I'm scared to try rebooting in now.
Definatly going to unlock the bootloader pronto.
Thanks again jmcdonald!
Hi guys,
I have run into a problem when trying to revert my phone back to stock using odin. Here is the backstory. I was rooted running CM 10.2. Decided to try a 4.3 ROM. Flashed the new ROM successfully but noticed it was really janky when I was setting it up (clean install) and decided to flash my backup of CM 10.2. When flashing the backup, the flash only partially completed and booted into a non-functional version of my 10.2 ROM.
At this point I decided to use Odin and go back to completely stock. Ive used this a few months ago and it worked successfully. I used a tar.md5 of VRBLK3. Odin says "passed!" but when the phone tries to boot up, it gets to the verizon 4G animation and sits there cycling through that animation indefinitely.
I'm at a loss as to what to try next. Ive tried re-doing the odin flash with the same results. Thanks for any help!
Edit: Ive tried booting into the recovery and doing factory rest/wipe cache partition with no luck
Edit: Tried booted into recovery and it worked! I think im good from here.
Clear Cache
I had something similar happen several months ago. I believe the solution for me was to boot into recovery and clear out the cache.
amotamatapia said:
Hi guys,
I have run into a problem when trying to revert my phone back to stock using odin. Here is the backstory. I was rooted running CM 10.2. Decided to try a 4.3 ROM. Flashed the new ROM successfully but noticed it was really janky when I was setting it up (clean install) and decided to flash my backup of CM 10.2. When flashing the backup, the flash only partially completed and booted into a non-functional version of my 10.2 ROM.
At this point I decided to use Odin and go back to completely stock. Ive used this a few months ago and it worked successfully. I used a tar.md5 of VRBLK3. Odin says "passed!" but when the phone tries to boot up, it gets to the verizon 4G animation and sits there cycling through that animation indefinitely.
I'm at a loss as to what to try next. Ive tried re-doing the odin flash with the same results. Thanks for any help!
Edit: Ive tried booting into the recovery and doing factory rest/wipe cache partition with no luck
Edit: Tried booted into recovery and it worked! I think im good from here.
Click to expand...
Click to collapse
athensjohn said:
I had something similar happen several months ago. I believe the solution for me was to boot into recovery and clear out the cache.
Click to expand...
Click to collapse
If you didn't get it fixed, pull battery, boot into recovery and factory reset. This will clear data and cache from previous installed ROM. Odin doesn't do this for you.
Sent from my SCH-I535 using Tapatalk
Tried looking everywhere, but couldn't really find anything. Any help is appreciated!
Alright some background info
I rooted my phone and unlocked the bootloader successfully. I wanted to do more, so I flashed TWRP onto my phone using JRummy's ROM Installer. I followed all the steps and successfully booted into TWRP recovery. I created a Nandroid backup and when I tried rebooting my phone it gets stuck on the 4G LTE boot animation.
I then tried wiping the cache etc. and restoring the backup I had just created. To no avail, the phone kept getting stuck on the boot animation. I've tried restoring the backup multiple times with no success.
On my last attempt I checked another box on the TWRP restore page, I think it was the VG5 verification or something. Halfway through what I though was going to be a successful restore, my phone reset and got stuck in the boot animation again. Now when I boot into recovery it's the stock recovery, not the custom TWRP as before. Tried clearing everything/factory reset and it still stuck on boot animation.
As a college student I'd like to get this figured out as soon as possible (hopefully before midweek, Friday at latest). If I can figure this out with your help I'll be very grateful.
If I can't find any other way, I'm willing to flash stock back using ODIN and seeing how that turns out. Also my home button is a little sticky so I doubt the Verizon worker would be able to boot into recovery or download mode.
Any suggestions?
For those of you TL;DR
1) Rooted phone / unlocked bootloader
2) Flashed custom TWRP recovery onto phone
3) Created a Nandroid backup from recovery
4) Tried rebooting and gets stuck on 4G LTE boot animation screen
5)Wiped cache etc. and retried multiple times. Doesn't work
EDIT: I flashed stock through ODIN and everything seems to be in order. I'll be trying to root and recover everything through TWRP again and if it doesn't work oh well. My end goal is to have a custom ROM
Maybe this will help you
Okay for your problem, if you can go to Download Mode and your recovery back to its stock form, your last option will be flashing it through Odin. There are several method and guides How to Flash via Odin. I will link to you all the guide and try it so your phone will be back to normal. Choose only 1 method
1.) [HOW-TO] Unbrick your soft bricked Galaxy S III (+ bootloader brick)
2.) Verizon Offcial VRBMB1 Odin Files, VRBMF1 Odin Files, and VRBMF1 Update Files
Must read first the guide and download all the necessary.
If your phone gets revived, you can try this method and choose TWRP recovery and update the recovery.
Click Here If Your Ready To Root/Unlock Bootloader/Flash Recovery
Note: You know the responsibility when you root your phone, I am not nor them who created this thread have responsibility to your phone, it is your choice.
Thanks for replying
I've got everything back in order now. I'll try installing AOKP or something
Your Welcome
That's good to hear
Hi guys,
I'm running my Moto G 16GB on Kitkat 4.4.2 system version 175.44.1.falcon_umts.Retail.en.DE. Today it offered to download and install the latest OTA update (called 176.44.1.en.DE). I started the download and tried to install it.
After downloading the update was placed in /cache. The file name was 'Blur_Version.175.44.1.falcon_umts.Retail.en.DE.zip', which surprised me. I was expecting something like 'Blur_Version.176.44.1.falcon_umts.Retail.en.DE.zip'.
When I tried to install it without removing root and without going back to stock recovery it ended with a signature error in CWM. Installing the untrusted zip manually didn't work as well - as expected.
Then I tried to follow advise from other threads and went back to stock recovery (extracted from a full install package 'Blur_Version.175.44.1.falcon_umts.Retail.en.DE' - 444MB) That seemed to work and the install of the OTA update went fine before getting stuck on the boot animation on the first boot. It sat there for 10 minutes before I rebooted and restored a CWM backup.
I'm running out of ideas. Some say it's sufficient to go back to stock recovery temporarily. Others say you need to go back to full stock.
I have to repeat that I'm rooted and that I've de-activated a few unused apps (mainly harmless google stuff (hangout, search, music and so on) and Motorola Assist, Migrate and 'Context Services') .
Are there further findings about what stops the OTA from succeeding?
Many thanks in advance,
Kleo2
Kleo2 said:
Hi guys,
I'm running my Moto G 16GB on Kitkat 4.4.2 system version 175.44.1.falcon_umts.Retail.en.DE. Today it offered to download and install the latest OTA update (called 176.44.1.en.DE). I started the download and tried to install it.
After downloading the update was placed in /cache. The file name was 'Blur_Version.175.44.1.falcon_umts.Retail.en.DE.zip', which surprised me. I was expecting something like 'Blur_Version.176.44.1.falcon_umts.Retail.en.DE.zip'.
When I tried to install it without removing root and without going back to stock recovery it ended with a signature error in CWM. Installing the untrusted zip manually didn't work as well - as expected.
Then I tried to follow advise from other threads and went back to stock recovery (extracted from a full install package 'Blur_Version.175.44.1.falcon_umts.Retail.en.DE' - 444MB) That seemed to work and the install of the OTA update went fine before getting stuck on the boot animation on the first boot. It sat there for 10 minutes before I rebooted and restored a CWM backup.
I'm running out of ideas. Some say it's sufficient to go back to stock recovery temporarily. Others say you need to go back to full stock.
I have to repeat that I'm rooted and that I've de-activated a few unused apps (mainly harmless google stuff (hangout, search, music and so on) and Motorola Assist, Migrate and 'Context Services') .
Are there further findings about what stops the OTA from succeeding?
Many thanks in advance,
Kleo2
Click to expand...
Click to collapse
If your phone is rooted or there is a CWM installed or there is any change in system files then ota will fail till you flash stock rom. You can't just bring back stock recovery. You have to "delete" root as well.
There is some info http://forum.xda-developers.com/showpost.php?p=47495650&postcount=6
I will post my case here, I had the same problem, I had CWM and root and when I rebooted to update I get installation failed and boot loop.
Then I just flashed stock recovery (only) rebooted and now I already have the update installed
CromoPT said:
I will post my case here, I had the same problem, I had CWM and root and when I rebooted to update I get installation failed and boot loop.
Then I just flashed stock recovery (only) rebooted and now I already have the update installed
Click to expand...
Click to collapse
Hi, thanks for your replies. Because of your report and others, who state the same (installing stock recovery only to get the update working) I was hoping to get around going back to full stock. It always takes a lot of time to configure the phone the way it was configured before essentially wiping.
Just to repeat what I did: when I try to install the OTA while CWM is installed there's just an error message in CWM, the update fails, but the phone is working normally afterwards. It's just not updated.
When I try with stock recovery the update process finishes without errors, but the phone get stuck during the boot animation.
Maybe there's a way to fix the boot loop?
Looking forward to any suggestions
Cheers, Kleo2
I tried again and found a way without going back to full stock.
1. flashed stock recovery from full 175.44.1 image
2. let the phone download the OTA and restart to install it
3. ota install in stock recovery went fine
4. reboot -> stuck on boot animation again
5. flashed CWM and wiped cache AND dalvik cache
6. next boot took longer than normal but got past the boot animation
7. android optimized/cached my apps and then started normally
8. version is now 176.44.1 and the phone seems to work normally (after 30 minutes of usage)
Hope that helps someone and that I won't have issues going forward because I did it this way.
Cheers, Kleo2
Kleo2 said:
I tried again and found a way without going back to full stock.
Click to expand...
Click to collapse
Thanks. :good: Did 1 to 3 and phone booted just fine (not stuck on boot animation)
My phone: No logo fix, root, Xposed Framework
After update root was still there, Xposed needed a new install
total noob
i would so much like to update my rooted moto g.. because of my card reader.
does anyone know a step-by-step-for-complete-noobs-post and could provide a link?
i'm just starting.. and so happy and proud that i got my phone rooted.. and that i got rid of this rebooting problem by erasing the cache.
but i'm already lost when i read "flashed stock recovery".. yeah i know: that much noob!
help would be much appreciated!
Papshmir
Papshmir said:
i would so much like to update my rooted moto g.. because of my card reader.
does anyone know a step-by-step-for-complete-noobs-post and could provide a link?
i'm just starting.. and so happy and proud that i got my phone rooted.. and that i got rid of this rebooting problem by erasing the cache.
but i'm already lost when i read "flashed stock recovery".. yeah i know: that much noob!
help would be much appreciated!
Papshmir
Click to expand...
Click to collapse
I UPDATED my rooted Kitkat Tesco version SUCCESFULLY! and still rooted.
What I did:
1. install Motorola Device Manager (RESTART computer and telephone)
2. downloaded MotoTool
3. Made a Nandroid backup in CMW, made a backup with MotoTool too. Just in case
And deactived (did not uninstall) my Xposed framework modules (if you dont have it, you dont need to)
I have some system apps disabled, but didnt re-activate it. (was too lazy haha)
4. downloaded the correct ROM from: http://sbf.droid-developers.org/phone.php?device=14 (Tesco UK 4.4.2)
5. unzipped the ROM and rename and overwrite the recovery.img to the exact name as in the MotoTool All In One 2.6\Data\KitKat\StockKitKatrecovery.img (Just for sure it's the same as my ROM, I dont know if all the ROMs have the same recovery sooo )
6. started MotoTool, unplug&replug device. Checked KitKat option in the program, did a connection check, it was okay. Did a NORMAL restart via progam. You have to grant permisson on your phone.
7. after reboot, rebooted the phone to FASTBOOT.
8. Checked Stock Fastboot in the program, it flashed succesfully. Then I went into recovery (1×down volume, then 1× up volume) checked if the recovery was working. It was working (android logo+ no command error message)
9. reboot (long press power button)
10. Updeted OTA, settings/inf./update.. blabla okay okay next next. Wait until it downloads (only 7.9 MB )
11. wait for the update to be done, then it reboots, then apps are being updated. Everything looks fine and working
+1 flash CMW or other recovery again.
Hope this helps! I was afraid to do it too. I'm not used to MotoTool and other Motorola stuff because I had a HTC Desire, it was much simplier with that. But no risk here either! Good luck!
So I am trying to put back my stock recovery so I can take the OTA, but after I flash the recovery and try to reboot to it, it says "No Command". I have reflashed TWRP and then the stock recovery again with the same result. The phone itself will boot fine, but I can't install the OTA as it gets an error part of the way into the install. Any ideas? I have the 1034.
EDIT: Well I remembered I did the H+ mod, so after reverting that the OTA flashed I had Faux Kernel before hand, but after reflashing it my wi-fi wont enable, any ideas?
Thanks!
Kleo2 said:
I tried again and found a way without going back to full stock.
1. flashed stock recovery from full 175.44.1 image
2. let the phone download the OTA and restart to install it
3. ota install in stock recovery went fine
4. reboot -> stuck on boot animation again
5. flashed CWM and wiped cache AND dalvik cache
6. next boot took longer than normal but got past the boot animation
7. android optimized/cached my apps and then started normally
8. version is now 176.44.1 and the phone seems to work normally (after 30 minutes of usage)
Hope that helps someone and that I won't have issues going forward because I did it this way.
Cheers, Kleo2
Click to expand...
Click to collapse
Thanks,
Wiping cache and dalvik cache did the trick for me. You saved my day
Please please help
I have the same problem. I've tried to update the new OTA and failed. After restoring full stock rom, the system simply doesn't boot!
I had Faux Kernel and GravityBox but I didn't revert anything. I thought that a full stock rom would clear all system settings.
This is my version of stock (Blur_Version.174.44.9.falcon_umts.Retail.en.GB) and I tried to flash it several times now. No success. I get stuck on the boot logo.
I tried to downgrade to 4.3 using version Blur_Version.14.71.8.falcon_umts.Retail.en.GB. I was able to boot and see the initial setup but I have no WIFI! I was trying to install 4.3 then try to update via OTA but OTA only works with WIFI so I'm stuck.
I also tried installing the 24th Feb nightly build of Cyanogen and the device also booted but with no WIFI.
I really don't know what to do! Please help me. I've tried other stock images out of despair but none with sucess.
Does anyone have a clue to what might be to problem and how to revert it?
Thank you
draco259 said:
So I am trying to put back my stock recovery so I can take the OTA, but after I flash the recovery and try to reboot to it, it says "No Command". I have reflashed TWRP and then the stock recovery again with the same result. The phone itself will boot fine, but I can't install the OTA as it gets an error part of the way into the install. Any ideas? I have the 1034.
EDIT: Well I remembered I did the H+ mod, so after reverting that the OTA flashed I had Faux Kernel before hand, but after reflashing it my wi-fi wont enable, any ideas?
Click to expand...
Click to collapse
Before flashing stock ROM try to clear/format all your partitions with a custom recovery!
Sent from my XT1032 using xda app-developers app
I installed the OTA update using the CWM recovery but not root, I changed the update-script to not give error during installation
Hui91 said:
I UPDATED my rooted Kitkat Tesco version SUCCESFULLY! and still rooted.
What I did:
1. install Motorola Device Manager (RESTART computer and telephone)
2. downloaded MotoTool
3. Made a Nandroid backup in CMW, made a backup with MotoTool too. Just in case
And deactived (did not uninstall) my Xposed framework modules (if you dont have it, you dont need to)
I have some system apps disabled, but didnt re-activate it. (was too lazy haha)
4. downloaded the correct ROM from: http://sbf.droid-developers.org/phone.php?device=14 (Tesco UK 4.4.2)
5. unzipped the ROM and rename and overwrite the recovery.img to the exact name as in the MotoTool All In One 2.6\Data\KitKat\StockKitKatrecovery.img (Just for sure it's the same as my ROM, I dont know if all the ROMs have the same recovery sooo )
6. started MotoTool, unplug&replug device. Checked KitKat option in the program, did a connection check, it was okay. Did a NORMAL restart via progam. You have to grant permisson on your phone.
7. after reboot, rebooted the phone to FASTBOOT.
8. Checked Stock Fastboot in the program, it flashed succesfully. Then I went into recovery (1×down volume, then 1× up volume) checked if the recovery was working. It was working (android logo+ no command error message)
9. reboot (long press power button)
10. Updeted OTA, settings/inf./update.. blabla okay okay next next. Wait until it downloads (only 7.9 MB )
11. wait for the update to be done, then it reboots, then apps are being updated. Everything looks fine and working
+1 flash CMW or other recovery again.
Hope this helps! I was afraid to do it too. I'm not used to MotoTool and other Motorola stuff because I had a HTC Desire, it was much simplier with that. But no risk here either! Good luck!
Click to expand...
Click to collapse
At part 8, I am getting an image of the android guy with his stomach open with a big red '!'. That's 'no command' right?
Any ideas? I have no idea what I am doing
Guys, a really easy way to update is:
1. Install Philz recovery - http://forum.xda-developers.com/showthread.php?t=2639583
2. Reboot and then download the OTA update when prompted - select Install when prompted
3. It will now reboot into Philz recovery, install the update and reboot
4. You'll see Android is Upgrading...
5. Re-boot back into recover and re-install faux kernel
I have just upgraded my XT1032 on 174.44.9 en GB (rooted + faux008) to 176.44.1 using this... worked like a dream! All I had to do was re-install faux kernel as that was overwritten by the OTA, but Root was in-tact...
i have root, twrp recovery and faux kernel, the problem is only faux kernel? Or I must remove all? (root recovery etc)
I successfully installed SafeStrap and flashed the Liquidsmooth ROM. It came up and booted once, but I could not login as the password I had set for the phone all of a sudden didn't work.
I restarted it again, tried again, no luck.
I then got it into download mode, ran Odin3, tried to flash the s3vzw_4.4.2.tar file, said it was successful, but is stuck at the Liquidsmooth boot screen.
Booted into recovery, tried to do a factory wipe, it was unsuccessful.
So . . . I am stuck with it at the boot screen.
Am I screwed now? Or is there a way to get it back?
Any and all help is appreciated.
UPDATE -- I was able to format Data and I seemed to have gained some traction. From there I wiped the cache as well and loaded the ROM again and it boots.
I'm actually trying to figure out how I can load an older factory ROM.
jaypeetee said:
I successfully installed SafeStrap and flashed the Liquidsmooth ROM. It came up and booted once, but I could not login as the password I had set for the phone all of a sudden didn't work.
I restarted it again, tried again, no luck.
I then got it into download mode, ran Odin3, tried to flash the s3vzw_4.4.2.tar file, said it was successful, but is stuck at the Liquidsmooth boot screen.
Booted into recovery, tried to do a factory wipe, it was unsuccessful.
So . . . I am stuck with it at the boot screen.
Am I screwed now? Or is there a way to get it back?
Any and all help is appreciated.
Click to expand...
Click to collapse
jaypeetee said:
UPDATE -- I was able to format Data and I seemed to have gained some traction. From there I wiped the cache as well and loaded the ROM again and it boots.
I'm actually trying to figure out how I can load an older factory ROM.
Click to expand...
Click to collapse
You can't flash any custom roms with the 4.4.2 NE1 bootloader, your currently soft bricked because of it
Sent from my Nexus 5