unregistered touches same place until restart - Galaxy S6 Q&A, Help & Troubleshooting

Hey all,
I've had this problem about 3 times now since I got the phone on April 10th. Suddenly the screen doesn't register touches on a certain area. I notice it when I'm trying to type on the keyboard. If I go to the home screen and try to start an app that's on the place where the screen doesn't respond , I can't click it. So it's no keyboard issue. When I reboot the phone it all works fine again. Does this sound as a hardware problem or a software problem?
Greets,
Swa100

Related

Hardware Keyboard quits sometimes. Help Touch Pro device

Need to know if anyone here with a Touch Pro device ever had the hardware keyboard just stop working. I cannot time when it will happen it varies. I can slide out the keyboard to respond to a message the backlight is on the all of a sudden after a little tyoing the light goes off and no key I press shows up. All of the screen keyboards work no issues. I have to do a soft reset to get it back. Today before it locked one of the keys I pressed was still in memory and I had rrrrrrrrrrrrrrrrrr all over the screen. I had to take the pen and cancel the message but the keyboard was not working anymore.
I called Verizon they had me change my backlight setting thinking it was that but of course it did not. Now they are saying a device replacement...guess I should have gotten the insurance.
Is there any advice someone can offer me on this problem?
I've had this happen to me one or two times, and the times that I've had the problem I've fixed it but soft resetting. I've just brushed it off as one of the quirks, and I haven't worried about it since it hasn't happened in a while. If it continues to occur I guess I would see what you're carrier can do for you
Mine did that a mutliple of times. Same exact scenario. Since I upgraded to energyrom, hasnt done it once. If I had to take a guess, some glitch in the preloaded rom?

[Q] Unresponsive touch screen?

I got nexus s (i9020T) recently and found the touch screen unresponsive sometimes. I've already tried several launchers(adw, lancherpro, go launcher ex), and it seems not launcher's problem. I've also tried to flash different ROMs, including CM-7rc2 and stock 2.3.3, and the problem remains.
Later I tried to bind Multi-touch Visualizer 2 to long pressing home button, and found the when screen is unresponsive, it can still detect press near edges very well, but not the center. While I press at the edge and drap across the center, it keeps tracking my finger correctly. In addition, Locking and unlocking the screen can solve the problem temporally.
I'm confused by the strange behavior, anyone experienced similar issue?
more info from test,
I connect my phone with adb, and tried to "cat /dev/input/event0"
The behavior confirms what I see in Multitouch Visualizor 2: the when the center of screen is unresponsive, nothing can be read from the device node.
I read the mxt224 touch screen controller doc, and it seems the chip features self-calibration, and thus I believe the "lock & unlock" will trigger the chip to tune it self in some way. I don't know kernel very well, so I cannot find the source code Any help please?
FYI. we are not alone.
http://code.google.com/p/android/issues/detail?id=13853
I got this problem too whenever my phone is in my pocket facing inward.
I have tried to open the calculator to see which part of the screen having problem. Mine is usually the "8" and "5" location unresponsive if my phone stayed in my pocket facing inwards for a certain period of time.
The problem will goes off after couple of mins when i can feel that the phone is cooler than my body temp.
I knew this happens to the Dell Streak as well.

[Q] [help] notification bar randomly opening

Hey guys,
Had my transformer for 2weeks now and loving it. However recently (first noticed it 2 days ago) the notification bar has randomly started opening itself. It doesnt happen on a regular schedule -sometimes it will happen 3 or4 times in a couple of minutes, sometimes only once or twice an hour but not less often than that.
It happens even when im not touching the tablet at the time so i dont think the screen accuracy/calibration would be causing it.
I have turned it off and off a number of times to no avail and Ive also tried a factory reset and even with no additional apps installed it still happens.
Finally ive tried it both with and without sd card in and it happens in both situations.
Oh, and the dock connector being attached or unattached doesnt stop it either.
Has anyone heard of this happening before and or have any ideas to solve this problem?
i get this too all the time. i'm not touching the screen and the notification pops up for no reason. sometimes apps open up randomly too, for example i get an email notification and the email app opens. very annoying when plugged into a projector whilst giving a presentation.
somebody must be able to help. I'm not rooted by the way and have no intention too.
Sounds like a hardware problem - the touchscreen registering fake touch events. Check for mechanical stress in the lower right corner.
Update
I probably should have added, like yours mine isn't rooted.
I also turned on the developer options for touch detection, and it's definitely detecting "phantom" touches in the bottom right corner so definitely hardware not software issue.
Unfortunately, yesterday I started having issues with the touch screen being unresponsive in the right third or so of the screen, so I've called Asus this morning and am RMAing the tablet anyway.
I'd suggest you do the same rob if it's still in warranty, in case its a prelude to larger issues like mine was.
interesting thanks both. i was weighing up an rma because my keyboard dock is getting very loose, letting the top of tablet move about an inch without hinge moving. i've turned on show screen taps and already seen one. thanks again.

Touchscreen randomly not working

Hello guys,
This is not necessarily a specific S8 plus thread, it's more of a software/hardware general related issue. I just replaced my display two weeks ago because I cracked the screen and the display a while ago.
After replacement, I got the phone, everything was good until I dialed *#0*# and started testing the touch. It appears that theres a portion in the middle of the display that is not working (the boxes wont go green when touching them). The thing is that, sometimes, the touch passes this test as in everything is ok and sometimes, it fails.
From time to time(pretty frequent) it randomly freezes and I have to hit the power button to open and close the screen to make it work again.
I just flashed the android Pie hoping a complete erase would fix the thing but it appears it didn't. Do you guys know any solution to my issue besides returning the phone in the service?
Thanks!

Question how to fix random black screen after opening phone

My z-flip3 5g has a strange problem. If i close it (by folding the screen closed), then after opening (unfolding) the screen and touching the right side button/fingerprint reader to unlock it, i hear the quiet "click" noise that indicates the phone is unlocked, but the screen stays black. i then have to repeatedly push the lock button on the right to lock the phone again and unlock it again. after several attempts the screen finally turns on. sometimes it will go black a few seconds later and the same issue continues. but other times the screen will stay on and work fine.
i have noticed that if i do not close the phone (folding the screen together) then i do NOT encounter this issue. the phone screen turns on when pushing the right side button (or touching the fingerprint sensor) and everything works fine.
this issue started yesterday, a system update installed yesterday as well, could it be related?
i already restarted many times, booted into recovery mode and wiped the cache. nothing has helped. the only way to avoid the problem is by not closing (folding the screen shut) the phone.
One UI v 5.1
Android 13
Security patch level Feb 1, 2023
fully stock/not rooted
I have same behavior. Did you solve this problem?
Unfortunately no. Did a factory reset, hoping that would help, but the issue persists
Mine has recently started doing the same. Last update was right before this started several weeks ago. I don't have mine set to require fingerprint, it should just turn on after opening. If I open it partway, it will turn on, then turn back off when fully opened.
hi,
i have same problem, it's software problem?
Not completely sure about that. They update this thing so often, it could be coincedence that it started shortly after an update. I want to try blowing out the hinges as I've got some dust under there that I hear when opening the phone. Definitely not a phone to put in your pocket after working in the wood shop!
Digital Dragon said:
Not completely sure about that. They update this thing so often, it could be coincedence that it started shortly after an update. I want to try blowing out the hinges as I've got some dust under there that I hear when opening the phone. Definitely not a phone to put in your pocket after working in the wood shop!
Click to expand...
Click to collapse
and donĀ“t take it to the beach either!
What is also strange is that when I close the phone and open it a few seconds later, there is no issues whatsoever. However, if I leave it closed a few minutes, then when opening it, the problems with the screen staying off happen.
Yes, definitely don't take it to the beach!
@netridah , mine is doing exactly that. Which makes me wonder is it a wake issue, or a mechanical/sensor issue with the hinge.
one more to the bill
I checked the flexes and I warmed up the logic nothing works
I have the same issue: Flip 3 - 5G with OneUI 5.1 - 1 April Patch level
When I open the phone I eventually see for less than one second the lock screen, the goes black and unresponsive.
Then I have to press the button to turn the screen off (even if it is already) and then re-press the button or use the fingerprint to turn it on and it will work (eventually, sometime I have to do it a couple of times).
I already googled it on many forums but no solutions, I've tried to:
Disable the always-on display - no result, at first looked like it did the trick but the day after was having the same issue.
Check all the updates of the system components like always on-on display (settings --> lock screen --> always on display --> info), no help everything is up to date.
Hi,
I have the exact same problem, only difference is that I'm on the z flip 4.
I get the black screen and sometimes when opening or closing the phone the screen can flash in a bright yellow or green color.
I got a motherboard but the problem continued
Next step changing screen is very expensive at the moment
This is driving me crazy - also started the day I updated to OneUI 5.1.
Hoping for a solution soon!
I am also encountering this problem, I went to samsung repair shop 1 month out of warranty, sales person said it is a screen issue and needs to be replaced for 430$. Mine was before the update, i took mine near the pool, got wet maybe, as the alarm for usb charging mentioned unplug it immediately, day after it began randomly dark when phone is openned fully. Zflip 3
Oh just an update, i did some tinkering today, Good lock all updated, disabled clockface, sprayed some contact cleaner on power button, and hinges, fold close and open for a minute or two, fell asleep for 1 hour, and when I woke up, my screen works back to normal, it wakes up when unfolded, no more waiting or hitting the power button several times. hope this stays like this.
piper_indebt said:
Oh just an update, i did some tinkering today, Good lock all updated, disabled clockface, sprayed some contact cleaner on power button, and hinges, fold close and open for a minute or two, fell asleep for 1 hour, and when I woke up, my screen works back to normal, it wakes up when unfolded, no more waiting or hitting the power button several times. hope this stays like this.
Click to expand...
Click to collapse
How to disable the clockface? what would that contact cleaner be?
thanks
firstchris said:
How to disable the clockface? what would that contact cleaner be?
thanks
Click to expand...
Click to collapse
Hi, few days now, I still have occasional blacking out, I've tried putting my phone on safe mode, and this seems to solve the problem. I suspect it may not be hardware fault, but 3rd party software, "good lock" or something else that conflicts wit one ui, that makes the flipping open lag waking up. Contact cleaner used for electrical stuff
Didnt use my z3 for about a week let the battery drain.. then charged it too 100% without turning on the phone.. my phone back to normal now.. hope it works for you guys
Hello,
I am using Z Flip 4 and last night I started having this problem as well. I can confirm 100% that my phone has no hardware nor a history of impact of any sort that's why it's really frustrating having this kind of problem.
Has anyone already found a resolution for this problem?
Z flip 4 here also. Had the same problem with the screen. Took the phone to Samsung and they changed the screen, frame and back panel's for free under warranty.
They said it's a hardware issue.
So better to take the phone to Samsung.

Categories

Resources