Database Info

Desire Alu Leather flip case

Im waiting for the PdAir leather flip case to come up, but meanwhile I spotted this for £20. Works for both Desire and N1. What you guys think?
http://www.clove.co.uk/viewProduct....rce=google&utm_medium=base&utm_campaign=pound

That looks a good price £20+vat = £23.50
Proporta are charging £30!
-Joe

Yes. Not bad at all... not sure if the PdAir one is better... below a sample of one on Ebay:
http://cgi.ebay.co.uk/PDair-Genuine..._PDAsAccessories_PDACases?hash=item335c381f19
I had PDair before - and I do like their quality. The Alu leather one seems to keep the whole screen free from obstruction, which I like...

The problem with the PDair, like the one for the HD2, is that the leather along the sides of the screen actually make it more difficult to use the touch screen at the edge of the screen. I prefer the Clove case mentioned above and a similar design from Noreve.

jah said:
The problem with the PDair, like the one for the HD2, is that the leather along the sides of the screen actually make it more difficult to use the touch screen at the edge of the screen. I prefer the Clove case mentioned above and a similar design from Noreve.
Click to expand...
Click to collapse
I agree with that. I had a PDAir case on a previous phone and found it did restrict access to the edge of the screen and also to the buttons at the bottom.
On the other hand, I am worried that the Desire Alu Leather flip case does not protect the edges of the phone from other things in the pocket and, even, whether small coins can slip under the cover onto the screen.
I may have to stick with a simple pouch. (But I also like the look of PDAir's Luxury Silicone Case like they make for the Nexus One.)

Good point.. the sides are open, but I think it should cover if it falls on the floor etc. I think I will go for the Prpoporta alu case, but get a screenprotector film as well.

Just orderered the Alu-Leather case from Clove. Will let you know when get it and how it feels.

Got the Alu Leather flip case today. Looks great!!! Finally I dont have to worry too much about scratching or damaging the phone. It looks stylish with black and inside white leather. It gives access to the headphone jacks and is easy to open quickly to answer calls etc.
Seems keeping the phone sturdy in place and nothing blocking the screen (unlike PdAir).
Will let you know how it feels after couple more days use!!
But looks really stylish!

Is the stud used to close the cover stands over the screen? I like flip cases, but on most of them the studs is just over the screen, and I'm worried about been able to broke it.
jannen said:
Got the Alu Leather flip case today. Looks great!!! Finally I dont have to worry too much about scratching or damaging the phone. It looks stylish with black and inside white leather. It gives access to the headphone jacks and is easy to open quickly to answer calls etc.
Seems keeping the phone sturdy in place and nothing blocking the screen (unlike PdAir).
Will let you know how it feels after couple more days use!!
But looks really stylish!
Click to expand...
Click to collapse

The stud.. or magnetic button... stands almost exactly over the optical trackball. But I wouldnt worry at all as the cover is lined with aluminium sheet. Means its well protected from impacts to the front and back of the phone.

How much depth would you say it adds to the phone?
Are you able to upload any pics? Would be awesome if you could, particularly one with the stud closed

Here are few pics... please dont pay attention to all the dust that the flash picked!
It does add little depth to the phone - as does PdAir etc. At least it has a aluminum layer strengthening it, but with the leather its smooth. I got this phone on a 24mth
contract so I want to protect my baby well at least for the first year or so...

Jannen, what is it like taking portrait photos now with the flap at the top? Does it get in the way at all?

Just took some pics... just hold the flip with your left hand. To me, no big deal really... and as it was sunny the flip actually blocked the sun reflecting from the screen. But honestly, I think that is personal taste. I prefer flip cases to others as they give some protection if you drop the phone while using it. Slip in ones dont protect if you drop it while using it.

TPU + Hard Cover cases from China...good

I tend to prefer cases that have TPU on the sides and a hard cover for the rear. I also like cases that are sleek, especially in terms of how much material is around the screen. I dont like a ridge that is too high as it gets in the way of operating the screen.
I picked up this case from ebay:
http://www.ebay.com/itm/370678126009?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2649
For a "cheaper" case I am very impressed. Fit is snug and the all the openings line up perfectly. Only time will tell if the TPU sides will stretch over time and the phone gets loose but so far so good. The TPU is smooth and too "grippy" which I like. My only gripe is that the power and volume buttons lack any sort of feedback so its difficult to know that I am pressing the buttons. These buttons are also not that pronounced so its not easy to just feel for it.
Overall, I am very happy with this case regardless of the price.

Link is no good.
The buttons are not easy to press without a case and some cases make it easier some cases make it harder. I think a great bonus in a good case is making those frequently used buttons easier to find and press.

I have had my eyes on a very similar version to that case, but I'm not 100% it would fit the AT&T Version of the HTC One X.
http://www.ebay.com/itm/Dual-Color-Rim-Hyrbrid-Gel-TPU-Case-for-HTC-ONE-X-S-V-With-Screen-Protector-/180934095196?pt=UK_MobilePhones_MobilePhonesCasesPouches&var=&hash=item2a2083315c

I also have a nice cheapo tpu on mine which I prefer over my other otterbox (because of its size). I put a little duct tape on the inside of the power button and it works much better and easier.
Sent from my HTC One X using xda app-developers app

does it protect the camera when you lie the phone down on a flat surface?

knowskillz said:
does it protect the camera when you lie the phone down on a flat surface?
Click to expand...
Click to collapse
If you are referring to the case I referenced then yes. The back of the case if hard plastic. The camera is recessed a bit behind the plastic.

tboooe said:
I tend to prefer cases that have TPU on the sides and a hard cover for the rear. I also like cases that are sleek, especially in terms of how much material is around the screen. I dont like a ridge that is too high as it gets in the way of operating the screen.
I picked up this case from ebay:
http://www.ebay.com/itm/370678126009?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2649
For a "cheaper" case I am very impressed. Fit is snug and the all the openings line up perfectly. Only time will tell if the TPU sides will stretch over time and the phone gets loose but so far so good. The TPU is smooth and too "grippy" which I like. My only gripe is that the power and volume buttons lack any sort of feedback so its difficult to know that I am pressing the buttons. These buttons are also not that pronounced so its not easy to just feel for it.
Overall, I am very happy with this case regardless of the price.
Click to expand...
Click to collapse
i have that same cover and the same complaint as u, also the speaker opening blocks the third row of the loud speaker openings, but sounds normally though.. its a really nice cover and every opening is exact to every port is accessible and i love the extension on the camera area, protects the lens

undergrad said:
I have had my eyes on a very similar version to that case, but I'm not 100% it would fit the AT&T Version of the HTC One X.
http://www.ebay.com/itm/Dual-Color-Rim-Hyrbrid-Gel-TPU-Case-for-HTC-ONE-X-S-V-With-Screen-Protector-/180934095196?pt=UK_MobilePhones_MobilePhonesCasesPouches&var=&hash=item2a2083315c
Click to expand...
Click to collapse
I purchased this case.
I liked the way it looks, and i like the material composition.
I did not like how difficult it was to press the buttons down with the tpu.
but the thing that made me, ultimately, stop using this case was how smooth and slippery the matte plastic case was. it made it slide on all surfaces. it wouldnt stay on any slanted material(chair, laptop, car hood, and bed). it was very easy to drop, and wouldnt stay in my lap.
I just went back to my smoked tpu case, which has good button feedback and is just grippy enough, yet smooth enough to slide in adn out of pockets

For around $10 why not just pick up a diztronic case that's designed for the XL? Ebay cases are sometimes a mixed bag, if you go with a decent name at least you have some quality to expect. Even more so when the price point is similar.

chinaman_chong said:
I purchased this case.
I liked the way it looks, and i like the material composition.
I did not like how difficult it was to press the buttons down with the tpu.
but the thing that made me, ultimately, stop using this case was how smooth and slippery the matte plastic case was. it made it slide on all surfaces. it wouldnt stay on any slanted material(chair, laptop, car hood, and bed). it was very easy to drop, and wouldnt stay in my lap.
I just went back to my smoked tpu case, which has good button feedback and is just grippy enough, yet smooth enough to slide in adn out of pockets
Click to expand...
Click to collapse
I do not like the shell

unitedatom said:
For around $10 why not just pick up a diztronic case that's designed for the XL? Ebay cases are sometimes a mixed bag, if you go with a decent name at least you have some quality to expect. Even more so when the price point is similar.
Click to expand...
Click to collapse
It looks like those don't protect the camera lens: http://www.amazon.com/s/ref=nb_sb_noss_1?url=search-alias%3Daps&field-keywords=diztronic+htc+one+x

[UserReview]Ringke Hybrid Fusion Case

This is the Ringke Hybrid Fusion Case.
Where to get it:
http://www.rearthusa.com/google-nexus-4-hybrid-fusion-case
http://www.amazon.com/Black-Google-Ringke-Fusion-Premium/dp/B00B7QGT6U
Personal rating:
8.5/10 -- Material
9.5/10 -- Grip
4.0/10 -- Button (Ease)
7.5/10 -- Fit/Openings
8.5/10 -- Style/Look
7.5/10 -- Protection
Material - TPU border w/ PC back. The actual case feels pretty solid, when I first held it I had a good firm grip on it, no slipping, the TPU borders have a solid feel and not plastic like the ol S-line TPU. The PC back looks and feels good, some users may have some "wet" spot issues where if you are using a screen protector it will stick to the back. Also if you press on it hard enough it will touch the back and even without a screen protector it will give a wet spot look but I never had that problem as the PC back is lifted high enough it doesnt touch. If it does touch then I would be putting a bit of pressure on it. This case is also a dust magnet to the max. Also I noticed two "melting points", thats where they seal the case but all the others are pretty smooth, the two markings make it look like another cheap case, not a biggie unless you're looking right at it.
Grip - Holding the phone the width reminded me of the official LG bumper, so for those who though the LG bumper gave it a bit of a bulk then you may feel the same with this, but honestly when I had the LG bumper I didn't like the grip very much but this one is actually good and maybe a little bit slimmer.
Buttons - When I went s-line tpu, official bumper, mybat hybrid to this, they all had different button pressure sensitivity. I though the s-line tpu was the worst but this case is the new king of worse button pressing hahaha... well the button is solid, its hard and it kinda feels like a capacitive button as in you press it, it doesn't give any feedback. So while other cases give off a click or you feel button actually going down, this doesn't. I only had 3 gripes and this is one of them. You'll eventually get used to it but when/if you go back to another case it is a noticeable difference.
Fit/Opening - Pretty snug fit, once the phone is in there is no gaps or offset. The PC back does not have a lip but they did add raised corners when you're placing it on its back, that gives it a little bit more of the slim look. All the opening looks properly measured. Only gripe I have is while the case can take my two ear phones, it doesn't fit the my aux cord I use in my car. With all the other cases it fits fine but this one is just a little off. Sure I can just get a BT adapter and whatnot but the fact is the cord worked for all the previous cases and not this.
Style/Look - Looks good, feels good, it is what I was looking for, a case with a clear backing and they made one. They could've tweaked a few more things but for the average user it is what they're looking for.
Protection - I think this case offers more protection than a regular TPU case but its certainly no ballistic or seidio case in which is bulky and will survive a 4' fall. This may absorb most of the shock but a big drop would probably break something on the phone.
=========================================
Pros: Looks good, feels good, clear backing.
Cons: Button pressing (lack of feedback), bigger 3.5mm cords have less clearance, dust magnet. (3 Gripes: Buttons!!, Melted spots, aux hole less clearance)
Price/Value: 8/10 - It is what I was looking for in a case, protection + clear backing. Pricewise I would probably say $9.99 value rather than the $13.99/24.99 they're going for.
=========================================
*** 56kb Modem Warning ***
=========================================

how bad is the dust attraction?

Thank you for the review!
I had better expectations with this case

bluesfear said:
how bad is the dust attraction?
Click to expand...
Click to collapse
The dust attraction isnt as bad, I guess you can say when trying to take pics of the case had to wipe it down numerous times but being that the back is clear you will be prone to finger prints and dust on the case. I guess I over exaggerated the dust part a little bit but it sure is less than the rubber/tire hybrid type cases lol those attract the most.
I just got back from the gym and the most I've seen on the case is just finger prints of course that will depend on if your environment is super dusty and what not. But as far as dust attraction it isnt so bad. I was just trying to clean the inside and took a little while to clean it off for picture purposes :good:

good review
appreciate the complete review. i have one in the mail. im going to keep my expectations low so the case seems more impressive...
is this going to work well will front screen protectors?

skuubage said:
appreciate the complete review. i have one in the mail. im going to keep my expectations low so the case seems more impressive...
is this going to work well will front screen protectors?
Click to expand...
Click to collapse
I would say it probably would as the lip doesn't wrap around the edges tightly but I would double check with the guys at the ringke thread as I don't have a screen protector on mine.
Sent from my Nexus 4 using Tapatalk 2

Black ZeroLemon Razor Armor [REVIEW]

I received my case last Wednesday and have been very pleased with it. I have left the case on for a week straight, normally I don't use a case for my phone so it did take a bit to get used to although with this case the added bulk is minimal, it does feel nice and solid, great build quality.
Love the buttons. Nice and big, it takes just enough pressure to press the button. I will often pop in my ear phones and rest my phone in a cradle at work on my desk. When placing the phone in the cradle without the case I would (8 out of 10 times) accidentally press the volume up button and dam near make myself def! With the case on that hasn't yet happened.
All the cutouts for the ports, mics etc are perfectly matched with what they are cut out for. No issues getting the USB cover off to charge the phone. Speaker sounds as it did without the case, IR blaster is fine, camera and heart monitor work great. No issues plugging in headphones either.
The inner TPU part of the case is solid. There will be no stretching out with this one. At 1st glance before I actually held the case in my hand I was sure the corners were going to be a deal breaker for me. On screen they looked bulky, angled and bothersome. This was just not true. Corners are really no bigger than a rounded corner case but offer much better protection from drops.
There is a small ridge or seam around the TPU part of the case, about 1/8" back from the front. This seam is actually the only annoying part for me on this case. It seems to be rough, maybe even a bit sharp. Feels like it needs to be slightly cut or filed back. Tried to get a picture of it but its a bit hard to tell from the picture what I mean. It doesn't catch or grab on anything just irritates my fingers when holding the phone one handed where my pinkie would be resting under the phone by the charging port.
The outer shell snaps on nice and tight, no wiggling or movement, real sturdy. That said, trying to remove the case is not an easy task. It will come off but it takes some prying and pulling.
Overall I am totally happy with this case and plan on using it for the foreseeable future. I haven't used a case on any of my phones for more than a weekend camping trip or so in the past 3 years so this must be a good thing.
Great job ZeroLemon!

I'm going to add my review since there's already a lot of individual review threads already. Hope you don't mind.
I got the case 2 days ago and I can say it's a quality well built case. Some cases that I have used the buttons are mushy and hard to press. But you won't have an issue with that with this case. The buttons are very big and very easy to press. Since they aren't mushy you can hear the buttons click when you press them easily which I like.
I think this case offers better protection than the Spigen Tough Armor case which I think it's comparable to. The lip is a pretty good size which some people might not like but I don't mind it since the screen is protected when the phone is laying on the screen or I drop it and it lands screen first. As PappaFloyd mentioned the corners offer a good amount of protection.
Going back to the comparison the ZeroLemon case is a little thicker than the Spigen but not that much to make a difference. I feel like Razor Armor case is easier to hold in my hand because of the texture of the plastic. I don't know how to exactly describe it but it's like a rough or grainy texture to it which makes it pleasant to hold. I'm thinking since it's not a smooth or glossy finish like the Spigen that the back will be more resistant to scuffs or scratches. After a short while the back of my Spigen showed some scratches and other signs of wear.
As already mentioned the cutouts are all good. The heart monitor is easy to access. Also already mentioned was the finger print scanner. I feel like the lip would get in the way and make it more inaccurate than it already is.
After just a few days of using it I really like it and will be sticking with this case for now. I really haven't found anything that I haven't liked about it yet. It offers good protection, feels nice in the hand and the cutouts are correctly aligned. If I find anything I'll update my review. I'll share some pictures showing the cutouts and the difference in thickness between the ZeroLemon and the Spigen case I was talking about.

*Review* Poetic Revolution [Premium Rugged] Nexus 6P Case

Hey XDA! I wanted to drop a review for the Poetic Revolution case here. I hope you enjoy!
The Packaging:
The case comes packaged in a clear plastic bag for simple presentation. While nothing fancy, it does the job and keeps the case more affordable.
The Look & Feel:
To start, this case definitely screams and looks "RUGGED"! It has a very industrial look and is daring you to drop your phone. This case definitely looks the role of its "rugged" moniker. The frame is a rubber TPU material that definitely helps with grip, and the phone is nice to hold because of it. There are some textures on the TPU that add more to the look than anything else, but they do add a little more grip as well. There are also 3 protruding lines on the top and bottom of each side which add to the rugged look and add grip. Then there is the "Revolution" name engraved into the TPU on the right side of the case (looking at the case from the back of the phone). The back of the case is made of a hard polycarbonate plastic. This definitely adds to the protection element of the case which I will touch on later. Then you have "Poetic" branding on the bottom of the back set in a rubber section. Nice little touch. There are also 3 strips of rubber on each side of the case on the back to add more grip to the case. To wrap things up, there are some faux screws on the corners to complete that rugged and industrial look. To summarize, this case isn't for people who like slim cases. This simply isn't a slim case and it doesn't try to be.
The Features:
This case has a few built-in features that I wanted to touch on. I will start with the built-in kickstand. It feels metal to me and it feels solid. It is easy to open and close and I don't get a flimsy feel from it at all. That is a nice tough. There are also port covers built in which will keep dust and some of the elements out of your ports which I think is great. Yes, it creates a bit of a hassle to charge your phone, plug in headphones, etc., but I think they are fitting in a rugged protection case like this. There is also a loop that you can hook something through to carry your case. I thought it was a nice touch. And last is the built-in screen protector. It is made of plastic and doesn't seem to be able to be removed. I'm in between on this one. I kinda wish there wasn't one since so many people get their own screen protectors nowadays and tempered glass screen protectors are popular right now. Also, there was a slight gap in between the screen protector and the screen of the phone so I had to press down harder to generate key presses. To Poetic's credit, I have a tempered glass screen protector already installed on my phone, so that may have affected the functionality of it. So I am not going to knock the case for this one, I will chalk it up as undecided.
**EDIT** Poetic has contacted me about the issue I was having with the built-in screen protector. They said have anything else on the screen will definitely affect the functionality of the built-in screen protector, which I figured. However, they are still going to have their production team look into it to make sure nothing got past them. That's pretty cool in my book!
The Protection:
On the protection front, I would say it is definitely heavy duty grade. It is advertised as "shock absorption" and I can't say I disagree at all. This case is definitely a tank that seems like it will keep your phone safe from some pretty major drops. I never test drop protection in my reviews because my phones are personal phones paid for with my own money, so I can't take that risk. But it definitely feels like it can withstand some heavy drops. The hard polycarbonate plastic on the back and the solid construction definitely make this case a heavy hitter in the Otterbox tier of cases. As I said in my look & feel section, this case isn't for the slim case lovers. But it's not marketed that way and just from the photos you can tell that much. This case should do the job in rough situations.
The Build:
To keep this pretty simple, this is a well made case with a small hiccup. The case feels good and substantial enough to be completely confident in it. The small hiccup that I've noticed are that the buttons are the easiest things in the world to press. It's not terrible, but it will take a little bit of force to generate the press. Overall, not a deal breaker by any means, but I wanted to mention it.
What I Like:
The build quality
The looks
The built-in kickstand
The protection
The price
What I Don't Like:
The buttons
The Verdict:
Overall, this case is a win. It is well made, should protect a very good amount, and has the looks to match. And all at a reasonable price. Other than a minor issue, I have no problem recommending this case to anyone in the market for a rugged case that will protect your expensive phone.
The Score:
9/10
Where to Buy:
http://www.amazon.com/Revolution-Pr...84&sr=8-1&keywords=nexus+6p+poetic+revolution