Database Info

Google Nexus One Pure Crystal Slip?

Anyone used this case? I REALLY don't want to put a case on my Nexus One, but it's also so slim and thin that I am going to drop it eventually.
Silly as it is, I don't want the whole phone covered up, so while the Innocase Surface II looks decent it also covers up the phone.. The Boxwave Pure Crystal Slip doesn't, but I can't find any reviews on it.
Anyone used one of these things? I don't use the dock, although I do use a horizontal belt case so I might have to get one that's slightly bigger as the N1 barely fits in the existing one, but I can deal with that.. That would happen for any case honestly, except for a skin.. I do like Best Skin Ever, but the last two I've bought seem to not be quite as "tacky" as the first few I had, therefore the grip wasn't quite as good. Maybe my imagination..

I bought the Boxwave case off amazon a month ago probably. its a nice case but save your money and buy a resin case from dcmugen on ebay, exact same thing with a different logo. its a nice case though, not too thick and easy to take on and off (I use both docks) so it fits my needs quite well.

Boxwave here. Nice thin and classy. Has rubber feel but not too soft either. It's a pretty good case makes phone look ten times better in my opinion. Is easily recommend it, but I don't use docks, so can't help there. Never the less, happy casing.

DC Mugen FTW. eBay - Epik Case. I got two cases for $8 including shipping and two screen protectors.

check out the cyclone crystal clip from boxwave - it looks even better (sry cant post link)

stiCk.E said:
check out the cyclone crystal clip from boxwave - it looks even better (sry cant post link)
Click to expand...
Click to collapse
Ah, I see.. I still think I prefer the Pure, no patterns on it, but otherwise the same.. Looks like Boxwave has the Cyclone (circle patterns), diamonds, a matte finish, some others..
Still haven't decided on which case.... I've always been disappointed in silicone cases, but I've almost always bought cheap $2 eBay ones..

I went with the Boxwave Pure Crystal Slip, we'll see when it arrives! God knows when, I had two shipping options.. 5-10 days ($2) or 1-3 days ($23!!)
So I'll see in 5-10 days

I got the Clear Pure Crystal Slip yesterday. Here's a quick review:
Overall, I like it and will likely use it when I'm out and about. It gives a much more secure grip on the phone without adding any weight or feeling larger. Although honestly I still think the Nexus One is a little TOO thin and a little slippery. This makes that better.
It feels like a cheap case, it's rubbery and smooth. If your hands are wet or oily it might be MORE slippery, don't know yet. In reality it seems pretty well made, and fits well. The Clear Pure version is crystal clear, no tint, no patterns, and you can clearly see the phone is a Nexus One.
I'm not doing any drop testing, but I think if the phone landed on a corner or an end this case could protect it. It's firm but pliable, not squishy like a silicone case and not a hard case. Primarily I think it'll protect it because it'll be LESS LIKELY to get dropped because the surface is a tackier and more surface area on the sides. I can pick up the phone with two fingers securely now, where before I'd have to tilt the phone up and get fingers under it to pick it up.
If anyone wants pictures I can do that, haven't yet...
Price summary: If it were $15 it'd be a deal. $20 seems too much.
Pros:
You can see see it's a Nexus. Google branding, colors, body build
It's thin, firm, and fits tightly
Covers up the power and volume buttons, but made to fit over them. Maybe a little rain resistance?
Adds better grip, more confidence holding the phone
Does not interfere with any ports (except a little on the power plug, see below)
Does not interfere with any openings (speaker, mics, camera, camera flash)
Does not interfere with the screen, particularly near the edges
Does not obscure the speaker when phone is on its back
Lets you lay the phone down face-down without resting on the trackball
Covers all corners, edges, entire back.
Cons:
It has a molding line all around it.. It's not that visible but you can feel it. Sides aren't smooth
Covers up the power and volume buttons, but made to fit over them. Makes it too easy to hit the buttons, and you can't feel the button very well (to feel it when touching) nor feel the action of the button itself.
Seems to make the stock charger plug (maybe others too) not feel "in", I think there's too much material around the plug
Takes away the nice texture and feel of the Nexus One
Thumb hits the case a little scrolling down on the trackball, but it doesn't make it harder to use
Other notes:
Does not protect the camera lens or the screen at all
Mine was clearly used, fingerprints all over and in the box backwards :/
A slim belt case intended for the N1 is too small to fit with this case
There is a weird cutout to the left of the HTC logo in the case, like maybe a hand strap could go there?

akifbayram said:
That case does look nice but 20 dollars seems a bit excessive. Look at other Amazon items. I found one for 5 dollars shipped that is pretty similar and doesn't have the hole in the back. http://www.amazon.com/Google-Crysta...X1DSC0SAJ94E&s=generic&qid=1275242975&sr=1-27
Click to expand...
Click to collapse
I have that case as well as the Crystal Boxwave slip.
The Boxwave one:
- Is clearer obviously (not the "smoked look").
- Fits a good deal tighter.
- Has a full cover for the lip, not the chin strap method of attaching.
- Has Boxwave written across the back.
I actually prefer the patterned one because it's more interesting, both detract from the Nexus, so it might as well add some flavor, right? The Boxwave one is far tighter fitting (and slightly thinner) but neither is going to come off in any kind of normal use. I also own the desktop dock, so I need to take it off on occasion to allow the phone to fit. Both cover all the buttons, so you have to get used to pressing them through the rubber. They also both have that edge around the edge of the case from being molded.
Anywho, just my $0.02

akifbayram said:
Speaking of 2 cents...there are a lot of auctions for the patterned Nexus One cases for 99 cents. http://stores.ebay.com/Cimo-Cases_G...15QQ_sidZ192097565QQ_trksidZp4634Q2ec0Q2em322 I wish I knew about this before
Click to expand...
Click to collapse
And those are probably worth at least $1.10...... Sometimes you really have to make a minimal investment to get something useful.

Getting a new case: Slim, fit in pocket.

I've been using the CM Tough for a while now. While it's a great case for protection (very reassuring), its very bulky, and the silicone inner traps all sorts of dust and hair from the inside of my pockets.
For the past month or so, I've been walking around with my phone in my hand, fearing the attack of the lint, and wiping the lint and dust off the silicone whenever I could.
I've decided that if my friends can have sexy, slim cases for the iPhone, allowing it to come easily in and out of the pocket, there's no reason I shouldn't do the same.
Protection, for me, isn't that much of a problem. The easiest way to protect your phone is to basically not drop it, and in the half year I've had my phone, I've never dropped it once.
SO, I've been looking at...
The Momax iCase Pro: TPU sides and plastic back, slim.
SGP Slider: Hard case with cutouts for the volume/power. Looks rather slim.
Not a big fan of cases that don't cover the bezel. I honestly don't get the point, no scratch protection for bezel, and I can't put my phone face-down.
Are there any more cases I should be aware of? Are there people who can give a mini-review for the cases I mentioned above?
Thanks!

Have a look at this, just picked one up yesterday
http://www.case-mate.com/Samsung-Ga...axy-S-T-Mobile-Vibrant-Barely-There-Cases.asp
Fits perfectly on my European GT I9000, feels much nicer than bare phone or hard silicon case I previously used, and it's as easy to get out of your pocket as the bare phone. The only issue you might have is with the bezel, as it doesn't really cover it, rather it leaves the psuedo chrome visible, and only adds at most 0.5mm clearance if you place the phone face down.
Personally, I'm very happy with it. The phone is grippier, the volume and power buttons are much easier to use, and it looks good.
Headphone jack access is better too.
Read the reviews on the link.
Here's another I had a look at recently, seems to give great protection, but it's fiddly to get on and off if you need to do a battery pull, and I didn't like the squidgy button covers, but it might be more in the line of what you're after.
http://www.otterbox.com/Samsung-Galaxy-S-Commuter-Series-Case/SAM4-GALXS-20-E4OTR_A,default,pd.html

I also use the Case Mate Barely There and it is the best I have tried so far.
It doesn't collect dust and the phone slides into the pockets.

I prefer the Momax. My workmate has the barely there, which is slightly slimmer but at the expense of losing some protection. The momax is the best option if you want slim but can still feel comfortable that your phone is safe imo.
I also had the toughcase and became frustrated with it for the same reasons as you. I'm very happy with the momax. Only issue is the power button is a bit harder to push now but a small price to pay.
Sent from my GT-I9000 using XDA App

Using the SGP Ultra slider, totally in love with it as i prefer to have direct access to hardware buttons

I have the Momax case and I have to say, it's pretty good.
http://forum.xda-developers.com/showthread.php?t=790318 - PhoenixFX has provided a review here.
Things i like:
It has a hybrid design, the back is not fully rigid but feels solid, soft sides.
Sides are flexible enough so that it goes on easy but stays in, also like how TPU doesn't become stretchy like silicone .
Lip that protects the screen, didn't notice too much dust getting in.
It's easy to keep a good grip on it.
Dislikes:
As the one posters above me said, the power button is harder to press. the same kind of applies for the volume keys but nor as much. It might be annoying in the long run.
Other than that the case is perfectly fine although I don't really know if it can be classified as slim by my standards , the back plate part is around 1.5mm thick. The back is a matte finish that doesn't offer too much grip but the sides are very grippy.
Hope this helps (I haven't tried any of the other cases so I can't really compare).

i think, case mate barely there is really good for slim profile somehow. and also capdase soft jacket xpose 2 also looks okay.

Check out carrymobiles, melko cases as well

I use the same Case-Mate Barely There case as DMD9, and I don't see myself changing it anytime soon. Very sleek, provides a little bit of a rubbery feel but not enough to make it difficult to slide out of pockets

After protecting my SGS like a baby for the last 11 or so months, it has suffered some damage here and there (home button doesn't work very well, scratches etc).
Thus I decided to ditch the case and go totally slimline with a replacement battery cover (the stock one is a fingerprint magnet, and I have kinda sweaty hands!). Ordered a silver one from focal price (the ones with the samsung logo, but clearly fake) and its a pretty good fit.
I totally recommend going caseless, it fits so well in the pocket when you go out!

I also support caseless usage,
I had a invisibleshield protector on the phone for a few months and that one worked well but it came off.
Now i still use the phone as if there was a protector on it and....not a scratch added.
the screen can really handle some abuse

Case Review: Cruzer Lite Androidified TPU Case

Hey guys, just got some awesome looking Android cases, so just wanted to share my impressions. I actually haven't seen any companies make a case like this yet, so I thought it was pretty cool.
First off, these cases look outstanding. The Andy the Android graphics on the case are really slick and give the phone a very stylish look. It's a bit more subtle on the smoke colored case, but it definitely pops on the blue case.
I previously owned a generic black TPU that had straggly edges, uneven cutouts, and inconsistent molding. Compared to this case, the Androidified case is noticeable cleaner. The Androidified case is cleanly cut, and has a consistent smooth molding. It's also tight and form fitting, which makes it bit hard to put it on the first time. But once you get it on, you can see that it conforms to the phone perfectly. The inside edges are a bit sharp, but I think it helps the case lay flat on the surface of the phone.
As far as protection goes, it's pretty much the same as other TPU cases go. It provides great protection against everyday scratches and small drops without adding a lot of bulk to the phone. I accidentally dropped my phone from my desk a few days ago without any scratches or cracks. The case also rises above the screen so that if you were to put it face down, the screen would be elevated from the surface.
There are cutouts for the micro-usb port, microphone, headphone jack, hdmi port, speaker, and camera. The power button and the volume rocker are covered, but have a button on the outside and is indented on the inside for easy access. This was actually a source of frustration for me on the generic TPU case, the button on the outside wasn't well defined and was hard to find at times. Along with a poorly finished side, there were times where I would mistake an unfinished edge for the power button. Thankfully, the smooth finish of the Androidified cases make this a non-issue.
Overall, I'd recommend these cases if you're looking for a stylish protective case that won't add much bulk to your phone. For $12.99, they are cheaper than the ones you'll find at Verizon, so I think it's definitely worth it. I got these at Amazon (my review is there too).
I also attached pictures of the smoke and blue Androidified cases vs the black generic TPU cases.

These cases are definitely great! the owner of the andriodify cases is a stand up guy who's all about introducing stylish quality produces at an afforable price.

Does this case have a cutout for the secondary microphone on the top? I really hope not because then I'll need to cut a tiny hole in the top of my case(already ordered one) :[

blarrick said:
Does this case have a cutout for the secondary microphone on the top? I really hope not because then I'll need to cut a tiny hole in the top of my case(already ordered one) :[
Click to expand...
Click to collapse
Did you mean you really hope so?
My bad though, I had a bunch of pictures, but I must have not uploaded one with the top view. Yes there is a cutout for the mic on the top.

immaage said:
Did you mean you really hope so?
My bad though, I had a bunch of pictures, but I must have not uploaded one with the top view. Yes there is a cutout for the mic on the top.
Click to expand...
Click to collapse
Lol yes that's what I meant, and thanks a lot that relieved my only worries about this case :]

Case Problems...
The Case is all right but the one from Verizon fits better and the buttons are easy to press. With this case the camera doesn't line up and it is terribly hard to press the volume rocker and power button...very depressing as I love the style of the case.

Boomwaller said:
The Case is all right but the one from Verizon fits better and the buttons are easy to press. With this case the camera doesn't line up and it is terribly hard to press the volume rocker and power button...very depressing as I love the style of the case.
Click to expand...
Click to collapse
I haven't received mine yet but if it's that bad I'll probably end up cutting them out myself, sure it's not going to look incredible but everything else about this case seems great, not sure why they'd ever think covering the power/volume buttons would be a good idea...

Agreed
blarrick said:
I haven't received mine yet but if it's that bad I'll probably end up cutting them out myself, sure it's not going to look incredible but everything else about this case seems great, not sure why they'd ever think covering the power/volume buttons would be a good idea...
Click to expand...
Click to collapse
Yea that's what I ended up doing was cutting them out it looks great other then my craftsmen skills lol, but it works a whole lot better now.

I'll be doing my own review of these cases too...maybe not on xda, as there is one already. As far as the buttons on the side are concerned, I did notice that they were a little hard to press at first. However, after using the case for more than a week or so the buttons are much easier to press; I guess they just had to be broken down some. I bought both the green and the smoke one, and they are both great!

The graphics on these are pretty nice...

I got one of these as well.
Yeah, the side buttons are a bit hard to press, but it gets easier with practice and the case seems to break in a bit as well over time. The first time I put it on it wasn't aligned properly, but every time I've taken it off and put it on since then it seems to get a little better.
My only real complaint is that a) it doesn't fit in the media dock, and b) when I take the case off to put the phone in the media dock it often pulls the plastic back off with it (I just need to be more careful in the future).

Coming from one of the generic TPU cases that I purchased on ebay, the covered buttons on the Androidified case was much better and easy to press.
In regards to the media dock, that must apply to cases in general right? I can't really see it fitting on a media dock if you have a case on it.

Yeah, correct. No case will fit in the dock.

no link to where to buy these from...?

frogdod said:
no link to where to buy these from...?
Click to expand...
Click to collapse
You can find them by searching androidified on amazon

I got the red one with argyle pattern. It is a PITA to push the power and the volume buttons. So I guess not all TPU cases are made equal. I ended up cutting a cutout around the power button. Problem solved. And also around the USB port since some of the generic charger connectors that I have are too big to fit through the USB cutout on the case.
That being said, the Curzer Lite TPU case that you have, is it the same as the one that Verizon has in their stores? I think somebody wrote the Verizon's Charge TPU case has the best power button cover (and I can almost vouch for that having had Verizon's TPU case on my Droid X) but I'm not positive.

I have the Cruzerlite Androidified case and it is almost the same as the Verizon one but it has the android pattern. Cruzerlite also makes the Argyle pattern and they are about half the cost of the Verizon OEM ones

It's a decent case...good protection from small drops and looks fairly cool. I can't get the top around the screen to stay uniform, so the fit could be better. I'll give it a 4/5 and 4.5/5 on value. I'll be waiting on the Case-Mate Barely There!

Not diggin this case anymore. Hard to get off without batt door coming with it. Much sleeker without the extra size...hoping casemate puts out a barely there soon.
If anyone wants it...$10 paypal gets it shipped to your door. (Blue as pictured above)

Case for a HTC Desire Z

Well Ive pretty much gone always against the idea of getting a case but Im seeing one day my poor phone falling and breaking to pieces so rather be safe than sorry.
What I need:
- This is a question: Whats the difference between hard cases (plastic) and soft cases (rubber)? Obviously besides the material
- The phone with the case on MUST still be able to be inserted without major problems into the pockets of a jeans pants (I see this a bit for difficult for rubber cases)
- I would still like to access everything, button/port wise (except maybe the back cover)
- No difference in using the keyboard or the phone in general
- Very easy to remove and put on the case from and to the phone
- Seeing as the phone is kinda heavy as is, a light material would be nice.
- No reception issues
A clear or a green case would be my personal choices as clear the phone is still visible and I like the color green Also my media player use to have a kickstand which would be nice but I care less...
Thanks

from dustrho's thread about HTC cases
GREEN CASE
http://www.youtube.com/watch?v=UQObS6fsY6Q
http://www.wirelessground.com/t-mobi...ase-green.html

Otterbox Commuter case. Solid and rugged case that can withstand almost any abuse you throw at it. Fits nicely into my jean pockets and is easy to whip out when I need it. All buttons and ports are easily accessible. Bulks the phone up just alittle, but I would rather have the bulk and have the phone survive a 4ft drop than have a cheap or flimsy case and have both case and phone go to the garbage.
http://www.otterbox.com/HTC-G2-/-HT...HTC4-G2XXX_color=20&start=1&cgid=htc-g2-cases
Got mine with a free car charger on ebay for about $30

from dustrho's thread about HTC cases
GREEN CASE
http://www.youtube.com/watch?v=UQObS6fsY6Q
http://www.wirelessground.com/t-mobi...ase-green.html
Click to expand...
Click to collapse
Thats the first case I looked at and like. The link is to the rubber version but there is a plastic one as well. Im not sure which to get as I dont know the different "feel" between the two.
Otterbox Commuter case. Solid and rugged case that can withstand almost any abuse you throw at it. Fits nicely into my jean pockets and is easy to whip out when I need it. All buttons and ports are easily accessible. Bulks the phone up just alittle, but I would rather have the bulk and have the phone survive a 4ft drop than have a cheap or flimsy case and have both case and phone go to the garbage.
http://www.otterbox.com/HTC-G2-/-HTC...d=htc-g2-cases
Got mine with a free car charger on ebay for about $30
Click to expand...
Click to collapse
1: Way too expensive
2: Bulks the phone up (making it hard to slide in a pocket quickly)
3: Very very bad looking
The quality looks OK (with port covers and everything) but those 3 things and after viewing a video just throw me off.

The difference is just how it feels on your hands. Rubber has a slightly softer feel while the plastic one is smoother but almost slippery (doesnt slip, just feels like it due to its smoothness)
Go for that case if anything. Another way to get a real feel is to drop by a tmo store. They sell both types (atleast where i live) and you can handle it to see if u like it.
Sent from my Desire Z via XDA App

I got the otterbox commuter a while back. it's nice, rubber inside, hard plastick outside, two layer case. There is rubber covers for usb and headphone jacks.
Case has nice texture on the backside, gives nice grip.
If you use headphone whit bulky 3.5mm like steel series siberia, it wont fit in whit the case. but any earplugs will fit just fine.
case makes the power button more easily accessible, like it.
the camera button is ****ed up. it's way to hard to press, and you dont feel the 2-stage shutter whit this case, you could easily cut the button covering part of tough.
i have put it back on and of multiple times, ans i'm not using it anymore, my front cover has 2 broken clips that keep to case on :/
i trust my grip enough, so i'm not using cases anymore, I have hard plastic shelled belt pouch to carry my phone, so if i fell of a bike or something hits me in the pocket, this case in pouch, phone will be just fine.
-Whippler

riahc3 said:
Well Ive pretty much gone always against the idea of getting a case but Im seeing one day my poor phone falling and breaking to pieces so rather be safe than sorry.
Click to expand...
Click to collapse
These phones are harder to break than you would think. Mine has survived at least 5 falls from about a metre in height onto concrete, and just scuffed up the aluminum edges in two spots
Sent from my SilverBullet 'HTCDesireZ running CM7'

The difference is just how it feels on your hands. Rubber has a slightly softer feel while the plastic one is smoother but almost slippery (doesnt slip, just feels like it due to its smoothness)
Go for that case if anything. Another way to get a real feel is to drop by a tmo store. They sell both types (atleast where i live) and you can handle it to see if u like it.
Click to expand...
Click to collapse
But doesnt the rubber one have a "grip" as well? It would seem logical.
I got the otterbox commuter a while back. it's nice, rubber inside, hard plastick outside, two layer case. There is rubber covers for usb and headphone jacks.
Case has nice texture on the backside, gives nice grip.
If you use headphone whit bulky 3.5mm like steel series siberia, it wont fit in whit the case. but any earplugs will fit just fine.
case makes the power button more easily accessible, like it.
the camera button is ****ed up. it's way to hard to press, and you dont feel the 2-stage shutter whit this case, you could easily cut the button covering part of tough.
i have put it back on and of multiple times, ans i'm not using it anymore, my front cover has 2 broken clips that keep to case on :/
i trust my grip enough, so i'm not using cases anymore, I have hard plastic shelled belt pouch to carry my phone, so if i fell of a bike or something hits me in the pocket, this case in pouch, phone will be just fine.
-Whippler
Click to expand...
Click to collapse
Like I commented, the otterbox isnt for me.
These phones are harder to break than you would think. Mine has survived at least 5 falls from about a metre in height onto concrete, and just scuffed up the aluminum edges in two spots
Click to expand...
Click to collapse
Until it falls from one fall from 1/2 a meter into grass and it breaks.
Better to be safe than sorry about making this costly investment.

I never said the rubber one doesn't have a grip. in fact, if i remember correctly, it has such a grip that it keeps on pulling my pockets inside out. go figure.
and as I said, drop by a tmo store and check it out. you'll feel the difference and it'll help you more than just words of explanations.

Check this one out:
http://forum.xda-developers.com/showthread.php?t=1096776
This is the case I am using, LOVE IT!

Best case for me hands down is the oem g1 sock slip case thing.
No need for screen protectors, no scratches on screen now or later
Goes into any pocket, no rubber annoying crap
Costs 3 bucks on ebay
Fits even with the 3600mah mugen battery (big plus for me)
Sent from my T-Mobile G2 using XDA App

[UserReview]Ringke Hybrid Fusion Case

This is the Ringke Hybrid Fusion Case.
Where to get it:
http://www.rearthusa.com/google-nexus-4-hybrid-fusion-case
http://www.amazon.com/Black-Google-Ringke-Fusion-Premium/dp/B00B7QGT6U
Personal rating:
8.5/10 -- Material
9.5/10 -- Grip
4.0/10 -- Button (Ease)
7.5/10 -- Fit/Openings
8.5/10 -- Style/Look
7.5/10 -- Protection
Material - TPU border w/ PC back. The actual case feels pretty solid, when I first held it I had a good firm grip on it, no slipping, the TPU borders have a solid feel and not plastic like the ol S-line TPU. The PC back looks and feels good, some users may have some "wet" spot issues where if you are using a screen protector it will stick to the back. Also if you press on it hard enough it will touch the back and even without a screen protector it will give a wet spot look but I never had that problem as the PC back is lifted high enough it doesnt touch. If it does touch then I would be putting a bit of pressure on it. This case is also a dust magnet to the max. Also I noticed two "melting points", thats where they seal the case but all the others are pretty smooth, the two markings make it look like another cheap case, not a biggie unless you're looking right at it.
Grip - Holding the phone the width reminded me of the official LG bumper, so for those who though the LG bumper gave it a bit of a bulk then you may feel the same with this, but honestly when I had the LG bumper I didn't like the grip very much but this one is actually good and maybe a little bit slimmer.
Buttons - When I went s-line tpu, official bumper, mybat hybrid to this, they all had different button pressure sensitivity. I though the s-line tpu was the worst but this case is the new king of worse button pressing hahaha... well the button is solid, its hard and it kinda feels like a capacitive button as in you press it, it doesn't give any feedback. So while other cases give off a click or you feel button actually going down, this doesn't. I only had 3 gripes and this is one of them. You'll eventually get used to it but when/if you go back to another case it is a noticeable difference.
Fit/Opening - Pretty snug fit, once the phone is in there is no gaps or offset. The PC back does not have a lip but they did add raised corners when you're placing it on its back, that gives it a little bit more of the slim look. All the opening looks properly measured. Only gripe I have is while the case can take my two ear phones, it doesn't fit the my aux cord I use in my car. With all the other cases it fits fine but this one is just a little off. Sure I can just get a BT adapter and whatnot but the fact is the cord worked for all the previous cases and not this.
Style/Look - Looks good, feels good, it is what I was looking for, a case with a clear backing and they made one. They could've tweaked a few more things but for the average user it is what they're looking for.
Protection - I think this case offers more protection than a regular TPU case but its certainly no ballistic or seidio case in which is bulky and will survive a 4' fall. This may absorb most of the shock but a big drop would probably break something on the phone.
=========================================
Pros: Looks good, feels good, clear backing.
Cons: Button pressing (lack of feedback), bigger 3.5mm cords have less clearance, dust magnet. (3 Gripes: Buttons!!, Melted spots, aux hole less clearance)
Price/Value: 8/10 - It is what I was looking for in a case, protection + clear backing. Pricewise I would probably say $9.99 value rather than the $13.99/24.99 they're going for.
=========================================
*** 56kb Modem Warning ***
=========================================

how bad is the dust attraction?

Thank you for the review!
I had better expectations with this case

bluesfear said:
how bad is the dust attraction?
Click to expand...
Click to collapse
The dust attraction isnt as bad, I guess you can say when trying to take pics of the case had to wipe it down numerous times but being that the back is clear you will be prone to finger prints and dust on the case. I guess I over exaggerated the dust part a little bit but it sure is less than the rubber/tire hybrid type cases lol those attract the most.
I just got back from the gym and the most I've seen on the case is just finger prints of course that will depend on if your environment is super dusty and what not. But as far as dust attraction it isnt so bad. I was just trying to clean the inside and took a little while to clean it off for picture purposes :good:

good review
appreciate the complete review. i have one in the mail. im going to keep my expectations low so the case seems more impressive...
is this going to work well will front screen protectors?

skuubage said:
appreciate the complete review. i have one in the mail. im going to keep my expectations low so the case seems more impressive...
is this going to work well will front screen protectors?
Click to expand...
Click to collapse
I would say it probably would as the lip doesn't wrap around the edges tightly but I would double check with the guys at the ringke thread as I don't have a screen protector on mine.
Sent from my Nexus 4 using Tapatalk 2