Related
Ok guys so I have managed to root my i9023 and flash clockwork recovery which was all good, I set about flashing some new roms via rom manager, again, all good.
So now I settle on this cm7 based rom which I love, used anim mod to get some nice transitions, then I used font changer.
All was good, then I decided that the font I was using was a bit ott so I decided to change it again, upon reboot it starts boot looping, bollocks !!!
So I try to get into clockwork recovery, and it seems to have gone back to the stock bootloader, grrrrr
I re flash clockwork, wipe / clear etc... then flash the rom again, but it would not flash, so I went to my backup of stock n flashed that, all good.
I then install rom manager again and flash the rom I liked again, this time no problem, but when it loads up the home button and search button are not working
So i decide on a factory reset, I select wipe everything including sd just to be sure but it comes up "error null"???
So now I wipe the sd manually and then do the reset and it works, ok, I re load everything on from scratch and all is good, but when I installed rom manager it says that clockwork recovery IS NOT installed again
Can anyone here work out from my ramblings WTF is going on???
I dont get why the font changer all of a sudden caused a boot loop, as I had changed font about 15 times with it without issue, also why clockwork recovery will not stick anymore after a reboot, when before it did and I have not changed a thing!
Cheers!!!
Rename install-recovery.sh in system/etc to something else, flash cwm recovery again, this time it'll stick until you install a stock rom again.
Rom manager is causing more problems than it's saving time, hence I don't use it.
Sent from my Nexus S using XDA App
Thanks for the reply, can you go into detail on what exactly I need to do to get clockwork to stick? I still hold noob status!
Thanks!
Also rom manager seems fine, I flashed loads of roms with it with no issue, I also rebooted a few time at least between flashes so I dont get why clockwork suddenly decided to jump ship.
It was the font changer that f&%ked it all up for me, or anim mod (which I wont touch now even tho I miss the wicked transitions).
When using Font Changer, it's better to do a reboot manually instead of selecting Reboot from within the program. That sometimes cause me a boot loop too. But after turning the phone off / on a.k.a. "reboot manually", the phone boots fine.
To elaborate what rentaric said, use Root Explorer and go to /system/etc/, there should be a file named install-recovery.sh. This file is responsible for flashing the stock recovery every time the phone boots. If you rename it to something else e.g. install-recovery.sh.bak then CWM will stick on reboot.
Thanks, but when I get into the /system/etc/ there is not file called install-recovery.sh.
The only .sh in there is init.goldfish.sh
Any ideas???
bump...............
Flash cwm rec and either stock or custom rom.
Stock rom incl the .sh you want.
Sent from my Nexus S using XDA App
I've read on these forums that using Clockwork on the I9023 is a no-go. Serves up incompatible ROMs, etc.
BTW, I'm looking to root my I9023. Can the OP please point me to the method he used.
athani said:
I've read on these forums that using Clockwork on the I9023 is a no-go. Serves up incompatible ROMs, etc.
BTW, I'm looking to root my I9023. Can the OP please point me to the method he used.
Click to expand...
Click to collapse
LINK: http://forum.xda-developers.com/showthread.php?t=1007782
Please read the whole thread, if I had it would have saved me half a night scratching my head...lol
rentaric said:
Flash cwm rec and either stock or custom rom.
Stock rom incl the .sh you want.
Sent from my Nexus S using XDA App
Click to expand...
Click to collapse
Yeah I have a custom rom installed, supercm7, but the install-recovery.sh. that I have been told is causing the problem of clockwork disappearing is not in the /system/etc/ folder, so I am asking if there is anything else that could be causing me to have to re flash clockwork via my pc every time I want to change rom?
I will tell you exactly what happens.
1. I go into rom manager
2. download a rom and choose flash rom from sd card
3. it asked if I want to wipe etc, i select yes
4. phone re boots and I get ! with an android
5. I pull the battery, hold volume up n power and boot / connect to my pc
6. re flash clockwork via SDK
7.the phone then load the new rom on its own
Before it would just flash the rom without me having to install clockwork again.
install-recovery.sh is only there if you're using a stock android rom.
"so I am asking if there is anything else that could be causing me to have to re flash clockwork via my pc every time I want to change rom?"
ROM Manager.
It's not a reliable working tool for ME as I'm changing ROMs/kernels on a regular basis and it might not work reliable the one time you need it.
Thanks for that, I may just sack rom manager then.
Its a shame as I flashed several roms with it without issue.
Oh well, loving this supercm7 so gonna stick with it untill an update comes out.
Many thanks to all who have replied, clicking the thanks buttons now!
I had the same problem but i installed a previus recovery and works fine formeforme
Sent from my Nexus S 4G using XDA Premium App
Download CWM Recovery.7z from attachments. Extract Recovery.tar
Download Superuser-3.1.3-arm-signed.7z (or newer from http://androidsu.com/superuser/). Extract Superuser-3.1.3-arm-signed.zip and copy it to your SD card (internal or external).
Put your phone in Download mode. Flash Recovery.tar using Odin.
Put your phone in Recovery mode. Flash Superuser-3.1.3-arm-signed.zip from recovery
Reboot and ready
Thanks developers!
So no need to make kernel un secure?
This post goes to my complete guide for Samsung galaxy ace plus...
Sent from my GT-S7500 using xda premium
I didn't needed. The other method posted makes the S7500L keep rebooting into recovery. So, I flashed stock firmware (S7500LVJLH1) with Odin and start over again, but same result.
I'd flashed again stock firmware and just flash recovery with Odin, then just write Superuser from recovery.
I hadn't time to verify if the problem was with boot.tar or with files that are installed in recovery mode by .bat file.
Sent from my GT-P1010 using xda app-developers app
شكراااااااااااااااااااااااااااااااا
thanxssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssss
Can i use this Superuser 3.1.3-arm.zip for rooting Galaxy Ace S5830 ??
Sent from my GT-S5830 using xda premium
Yeah... For any phone with ARM CPU core
Sent from my GT-I9100 using xda app-developers app
issues after flashing gt-s7500T
lokeshsaini94 said:
So no need to make kernel un secure?
This post goes to my complete guide for Samsung galaxy ace plus...
Sent from my GT-S7500 using xda premium
Click to expand...
Click to collapse
I got my hands on a gt-s7500t yesterday and started xda searching on how to put a custom rom on it. i tried all the methods listed under s7500 to put cwm in it but none worked and whenevr i tried to enter either through pressing vol "+" "-" home and power it never enetred recovery nor it enetered through adb so i moved onto flashing cwm through s7500L guide. so by using http://forum.xda-developers.com/showthread.php?t=1725198 guide, i flased successfully flashed cwm and the phone was stuck in recovery boot loop.
I successfully rooted by through cwm and even installed a custom rom but the dammit phone never came out of the recovery loop, so i went to the next step and downloaded a stock UK vodafone firmware from sam mobile and tried flashing that since australian s-7500t stock rom is unavailable.
Now odin gave a "fail" meesage when it reached to flashing fat.bin, i tried almost 3 different stock roms but same problem. I took the battery out, and tried starting the phone the phone started but no display, so i connected it to samsung kies hoping kies will have a solution, well as it turned out that when i went into emergency firmware recovery, the device screen magically lit up for few seconds and went dark again.
i was baffled so i decided to repeat the process http://forum.xda-developers.com/showthread.php?t=1725198 and flash cwm and boot again. well this time when this completed and phone restarted the phone restarted normally and everything seemed fine, so through adb i went into recovery mode again just to see if all was working fine, but now its the same recovery loop again, have tried wiping the dalvik cache, factory reset and cache reset but nothing happening, HAVENT tried the advanced>recovery reboot> procedure, yet.
now am thinking of two options. first to try install another custom rom and see if that might hellp or since iv got another galaxy ace plus, try to extract the custom s7500T rom out of it somehow, (if u guys can tell me howto, cuz i tried titanium backuo but since it requires root and since i cant get into cwm without using s7500L technique which soft bricks i cant use titanium backup to extract the rom)
Anyone got any idea what to do? is there a pit,bootloader,csc,phone etc files that i can flash through odin rather than flashing a complete package through PDA?
or can i just flash boot.img from a stock rom using PDA and you guys think that will solve the problem>?
Android System Recovery (3e) problem
i flashed "recovery.tar" as PDA via Odin3...then went into recovery mod but it say "Android System Recovery (3e)"..i think its Samsung's default recovery ... so where is CWM???
hi guys!
i have a problem with my ace plus and i have to bring it to a warranty center.. so i have to restore the stock rom and un-root.. any help?
is there a guide to do it? do you know where i can find the stock rom?
thanks a lot
If I root my phone, any advantage in the new root between old 1....
Can someone help me?
My Galaxy Ace Plus (S7500) doesn't want to boot in download mode
Thanks guys, great work
However, my Ace plus is GT - S7500W (London 2012 limited edition)
Is there anyway to root it?
Thanks so much!
Hi, Is there a easy way to unroot this method? Do all my files and settings remain intact when using this root method?
Thanks.
kol12 said:
Hi, Is there a easy way to unroot this method? Do all my files and settings remain intact when using this root method?
Thanks.
Click to expand...
Click to collapse
This method don't erase your data, just write a custom recovery and add SuperUser app and bin to your system.
The best method to unroot is installing stock firmware package.
farodriguez said:
This method don't erase your data, just write a custom recovery and add SuperUser app and bin to your system.
The best method to unroot is installing stock firmware package.
Click to expand...
Click to collapse
Thanks. So does installing stock firmware not write any files to the data partition of android? What about the apps that are included in stock firmware sms app, contacts,call logs, maps etc, will those apps data be lost with installing stock firmware?
---------- Post added at 11:27 AM ---------- Previous post was at 11:23 AM ----------
The recovery.img you have is larger than the stock firmware recovery.img. Does this write more data somewhere?
here is Android 4.1.2 for Galaxy ace plus working
http://forum.xda-developers.com/show...5#post38450355
fido747 said:
I got my hands on a gt-s7500t yesterday and started xda searching on how to put a custom rom on it. i tried all the methods listed under s7500 to put cwm in it but none worked and whenevr i tried to enter either through pressing vol "+" "-" home and power it never enetred recovery nor it enetered through adb so i moved onto flashing cwm through s7500L guide. so by using http://forum.xda-developers.com/showthread.php?t=1725198 guide, i flased successfully flashed cwm and the phone was stuck in recovery boot loop.
I successfully rooted by through cwm and even installed a custom rom but the dammit phone never came out of the recovery loop, so i went to the next step and downloaded a stock UK vodafone firmware from sam mobile and tried flashing that since australian s-7500t stock rom is unavailable.
Now odin gave a "fail" meesage when it reached to flashing fat.bin, i tried almost 3 different stock roms but same problem. I took the battery out, and tried starting the phone the phone started but no display, so i connected it to samsung kies hoping kies will have a solution, well as it turned out that when i went into emergency firmware recovery, the device screen magically lit up for few seconds and went dark again.
i was baffled so i decided to repeat the process http://forum.xda-developers.com/showthread.php?t=1725198 and flash cwm and boot again. well this time when this completed and phone restarted the phone restarted normally and everything seemed fine, so through adb i went into recovery mode again just to see if all was working fine, but now its the same recovery loop again, have tried wiping the dalvik cache, factory reset and cache reset but nothing happening, HAVENT tried the advanced>recovery reboot> procedure, yet.
now am thinking of two options. first to try install another custom rom and see if that might hellp or since iv got another galaxy ace plus, try to extract the custom s7500T rom out of it somehow, (if u guys can tell me howto, cuz i tried titanium backuo but since it requires root and since i cant get into cwm without using s7500L technique which soft bricks i cant use titanium backup to extract the rom)
Anyone got any idea what to do? is there a pit,bootloader,csc,phone etc files that i can flash through odin rather than flashing a complete package through PDA?
or can i just flash boot.img from a stock rom using PDA and you guys think that will solve the problem>?
Click to expand...
Click to collapse
I've been having the exact same problem as you with my S7500L. Boot loop error after installing custom roms. I can, however, install CWM and obtain root without problems.
I really don't understand how the s7500L rom guys developed them... how did they get out of the boot loop.
I tried replacing the boot.img from the custom ROM with one from a stock rom... nothing.
Corsario_Negro said:
I've been having the exact same problem as you with my S7500L. Boot loop error after installing custom roms. I can, however, install CWM and obtain root without problems.
I really don't understand how the s7500L rom guys developed them... how did they get out of the boot loop.
I tried replacing the boot.img from the custom ROM with one from a stock rom... nothing.
Click to expand...
Click to collapse
Hi i have the same problem and the solution is flash this http://forum.xda-developers.com/showthread.php?t=2255561
i used odin, and works perfect.
i installed the cwm and i cant enter recovery it sthows a trinagle sith ! ander the samsung and after it boots normaly
vasilisaerox said:
i installed the cwm and i cant enter recovery it sthows a trinagle sith ! ander the samsung and after it boots normaly
Click to expand...
Click to collapse
Just flashed recovery and i'm having the same issue. Original 2.3.6 installed never touched.
I received notice this morning that a firmware update was ready to install. I chose to install it and the tablet rebooted and start to apply the update. However, it gets to 32% on the update install, stalls, and then reboots and does the exact same thing.
Any thoughts on a solution?
rrhutch said:
I received notice this morning that a firmware update was ready to install. I chose to install it and the tablet rebooted and start to apply the update. However, it gets to 32% on the update install, stalls, and then reboots and does the exact same thing.
Any thoughts on a solution?
Click to expand...
Click to collapse
i have the same problm :crying:
Need more info than that.
For example... Are you rooted or stock?
If rooted, there are a couple of reasons off hand I can think of you could be having a problem.
If you're stock, well... All I can think of is wave your hands in the air, and wave them like you just don't care. Pretty sure that won't fix the problem though, but if it does, report back! xD
I'm rooted.
Sent from my DROID RAZR using xda app-developers app
exactly the same problem
I have the exact same problem.
GT-N8013, rooted, stock rom with root injected.
I called Samsung tech service and they said I should send my device to them.
The only way I can get out of this "update->reboot->update->reboot->..." infinite loop is to get into ODIN mode. (I can't turn off the device)
I decided to re-flash my rom (stock rom with root injected) in ODIN mode, but it does not have any effect and the device is still on this infinite loop. I'm worried if I messed up the device even more by doing that.
ytdong said:
I have the exact same problem.
GT-N8013, rooted, stock rom with root injected.
I called Samsung tech service and they said I should send my device to them.
The only way I can get out of this "update->reboot->update->reboot->..." infinite loop is to get into ODIN mode. (I can't turn off the device)
I decided to re-flash my rom (stock rom with root injected) in ODIN mode, but it does not have any effect and the device is still on this infinite loop. I'm worried if I messed up the device even more by doing that.
Click to expand...
Click to collapse
I'm in the same situation.
I'm going to try http://forum.xda-developers.com/showthread.php?t=1849994
when I get home tonight to see if this fixes it.
Is there any way I can at least access the internal storage somehow and copy my data?
There are some important job application info in S Note..
ytdong said:
I have the exact same problem.
GT-N8013, rooted, stock rom with root injected.
I called Samsung tech service and they said I should send my device to them.
The only way I can get out of this "update->reboot->update->reboot->..." infinite loop is to get into ODIN mode. (I can't turn off the device)
I decided to re-flash my rom (stock rom with root injected) in ODIN mode, but it does not have any effect and the device is still on this infinite loop. I'm worried if I messed up the device even more by doing that.
Click to expand...
Click to collapse
ytdong said:
Is there any way I can at least access the internal storage somehow and copy my data?
There are some important job application info in S Note..
Click to expand...
Click to collapse
you should've sync your snote data with drive or dropbox!!! any firmware update 101 is to back up all your data
ytdong said:
I have the exact same problem.
GT-N8013, rooted, stock rom with root injected.
I called Samsung tech service and they said I should send my device to them.
The only way I can get out of this "update->reboot->update->reboot->..." infinite loop is to get into ODIN mode. (I can't turn off the device)
I decided to re-flash my rom (stock rom with root injected) in ODIN mode, but it does not have any effect and the device is still on this infinite loop. I'm worried if I messed up the device even more by doing that.
Click to expand...
Click to collapse
Try using Odin to flash the high on android cwm recovery. Once I did that I could restore a backup and boot to android.
Thank you! but I've been on stock recovery so I never flashed cwm or made a cwm backup. How can I restore to a backup after I flash the cwm recovery?
Nefariouss said:
Try using Odin to flash the high on android cwm recovery. Once I did that I could restore a backup and boot to android.
Click to expand...
Click to collapse
if you've never flash CWM, that means you never backed up via CWM, which means you can't restore to a back up. You have to use ODIN and flash a stock firmware on your note to recover it
Yes I'm trying to find a stock firmware for N8013 (UEALGB) but no luck. There is only "root injected" stock firmware, which is causing the problem right now...
Has anyone resolved this problem?
khanh1289 said:
if you've never flash CWM, that means you never backed up via CWM, which means you can't restore to a back up. You have to use ODIN and flash a stock firmware on your note to recover it
Click to expand...
Click to collapse
ytdong said:
Yes I'm trying to find a stock firmware for N8013 (UEALGB) but no luck. There is only "root injected" stock firmware, which is causing the problem right now...
Has anyone resolved this problem?
Click to expand...
Click to collapse
I have a N8013 and was running the stock, root injected firmware (UEALGB). Today I got the update notification. I tried to install and it kept looping. This is what I did:
1. Flashed the stock firmware with ODIN. You'll find the stock firmware here:
http://forum.xda-developers.com/showthread.php?t=1847706
2. When my tab rebooted, I got another update notification. I installed it and it worked. I'm now running UEALI3.
I didn't lose any data. I just lost root.
This worked for me as well. Thanks a lot, Vincent9756!:good:
Vincent9756 said:
I have a N8013 and was running the stock, root injected firmware (UEALGB). Today I got the update notification. I tried to install and it kept looping. This is what I did:
1. Flashed the stock firmware with ODIN. You'll find the stock firmware here:
http://forum.xda-developers.com/showthread.php?t=1847706
2. When my tab rebooted, I got another update notification. I installed it and it worked. I'm now running UEALI3.
I didn't lose any data. I just lost root.
Click to expand...
Click to collapse
Vincent9756 said:
I have a N8013 and was running the stock, root injected firmware (UEALGB). Today I got the update notification. I tried to install and it kept looping. This is what I did:
1. Flashed the stock firmware with ODIN. You'll find the stock firmware here:
http://forum.xda-developers.com/showthread.php?t=1847706
2. When my tab rebooted, I got another update notification. I installed it and it worked. I'm now running UEALI3.
I didn't lose any data. I just lost root.
Click to expand...
Click to collapse
Worked for me. Thanks!
rrhutch said:
Worked for me. Thanks!
Click to expand...
Click to collapse
What if i didn't do Root Injected, but the Second Method of Flashing the Root.zip with CWM? which recovery do i download and flash in odin?
would that work?
Kikoshi said:
What if i didn't do Root Injected, but the Second Method of Flashing the Root.zip with CWM? which recovery do i download and flash in odin?
would that work?
Click to expand...
Click to collapse
Flash the recovery version for your firmware. If you have stock, flash the GB recovery. If you have LH2, flash that.
If you want to save root, use OTA RootKeeper before doing anything.
Z a p i x said:
Flash the recovery version for your firmware. If you have stock, flash the GB recovery. If you have LH2, flash that.
If you want to save root, use OTA RootKeeper before doing anything.
Click to expand...
Click to collapse
Im sorry but what do you mean GB Aaah that was the primary stock recovery before i updated to LH2 lol, now i get it.?The one that i have is the CWM HighonAndroid which was used for the Method 2 to obtain root, so then i jus tdownoad the stock LH2 Recovery, and use OTA rootkeeper before Odin LH2 Stock Recovery right? Will there also be a stock kernel and recovery for UEALI3 ? was thinking of possibly using the Triangle Away after this, possibly might be needed. Though maybe not.
Just want to make sure that everything is normal after this lol
ok... giving it a shot now, and using the OTA RootKeeper, lets see if this works
Everything Got updated !!! OTA seems to have worked which was awesome.
Testing everything to make sure that Root is fully funtional .
Used RootChecker, and things seems fully working!
Thank you loads for the help!
Kikoshi said:
Im sorry but what do you mean GB Aaah that was the primary stock recovery before i updated to LH2 lol, now i get it.?The one that i have is the CWM HighonAndroid which was used for the Method 2 to obtain root, so then i jus tdownoad the stock LH2 Recovery, and use OTA rootkeeper before Odin LH2 Stock Recovery right? Will there also be a stock kernel and recovery for UEALI3 ? was thinking of possibly using the Triangle Away after this, possibly might be needed. Though maybe not.
Just want to make sure that everything is normal after this lol
ok... giving it a shot now, and using the OTA RootKeeper, lets see if this works
Everything Got updated !!! OTA seems to have worked which was awesome.
Testing everything to make sure that Root is fully funtional .
Used RootChecker, and things seems fully working!
Thank you loads for the help!
Click to expand...
Click to collapse
Yeah, there will most certainly be kernel and recovery uploads.
the only issue you might run into is CWM not sticking. If it doesn't reflash CWM in ODIN with reboot unchecked. Then after you flash it, boot into CWM. When you select reboot, it should offer to prevent stock recovery from replacing it.
and you're welcome, glad to help
Guys u might think this is a dumb question but how do i flash stock recovery with odin like were do insert the file i know how tp put in dl mode and get my comp to see my tab in odin and i did flash the prerooted injected stock uealgb recovery to get root i just dont know were to put the files in odin some help would be greatly appreciated, cause i need to flash this first before i do the ota update correct ? If not i will bootloop ? So rootkeeper alows me to keep root acess after ota? Thanks guys
Sent from my GT-N8013 using xda app-developers app / jelly powered samsung infuse 4g
Hi, I'm new to flashing roms and after installing CWM 6.0.4.7 on my xt1032 and rooting whenever i try to flash a rom it gets stuck in the boot animation. I have tried CM 11 Carbon rom and paranoid android. I don't know if I'm using the wrong GAPPS or what. Please help.
Gapps are not the problem:the same thing was happening to me. The real problem is the bootloader: if you are on kitkat, you have to revert to stock jelly bean (4.3), install custom recovery (for JB), root and flash the custom rom you desire. That's the only way that worked for me.
Sent from my falcon using xda app-developers app
skorpionvenom said:
Gapps are not the problem:the same thing was happening to me. The real problem is the bootloader: if you are on kitkat, you have to revert to stock jelly bean (4.3), install custom recovery (for JB), root and flash the custom rom you desire. That's the only way that worked for me.
Sent from my falcon using xda app-developers app
Click to expand...
Click to collapse
Ok thanks, I will try that when i have some free time. And how do you revert back to 4.3
never mind i found a post on how to testing now
Brick?
skorpionvenom said:
Gapps are not the problem:the same thing was happening to me. The real problem is the bootloader: if you are on kitkat, you have to revert to stock jelly bean (4.3), install custom recovery (for JB), root and flash the custom rom you desire. That's the only way that worked for me.
Sent from my falcon using xda app-developers app
Click to expand...
Click to collapse
I tried o revert to 4.3 but when flashing boot.img it said hab check failed for boot and now when i try to boot up it goes to the unlock booloader warning turns off and repeats. I can get back to fastboot but when i try to enter recovery it shows a broken android lying sideways. I think i bricked my phone. I really need help
Go back to Stock and start from Scratch.
As long as you can enter fastboot you should be fine.
I too have suffered with this problem, today i have done as above said, reflashed 4,3 but when i onstalled the cwm 4.3 version i still suffered the same problem, so i tried the cwm4.4 and hey presto, i now have cm11 on my phone, yee haaa
A Wild Willis said:
I tried o revert to 4.3 but when flashing boot.img it said hab check failed for boot and now when i try to boot up it goes to the unlock booloader warning turns off and repeats. I can get back to fastboot but when i try to enter recovery it shows a broken android lying sideways. I think i bricked my phone. I really need help
Click to expand...
Click to collapse
Try this,when you get to the broken android follow the instructions in the link below for "external reset" this will reset your phone.
https://motorola-global-portal.cust..._detail/a_id/97329/p/30,6720,9050/action/auth
if that fails just flash a stock 4.4 image with fastboot using one of the guides.
Worked
quizmaniac said:
Try this,when you get to the broken android follow the instructions in the link below for "external reset" this will reset your phone.
https://motorola-global-portal.cust..._detail/a_id/97329/p/30,6720,9050/action/auth
if that fails just flash a stock 4.4 image with fastboot using one of the guides.
Click to expand...
Click to collapse
Yes thank you so much I'm back on 4.4.2 You guys are great
hello everyone
I have a question about PaulOBrien superboot root method (look in modaco forum the moto g root method 1).
I have a 16GB Moto G and updated to Kitkat via OTA.
yesterday I used the method 1 (superboot) on windows 7, to root my phone, and run it for the first time and ended on a black screen with green bars (supposedly normal). I power off the phone and turned on and load kitkat normally and noted that the phone was not rooted.
y tried the method for a second time and have the same results (ended on a black screen with green bars), but when kirkat launched, on the initial screen i saw a message "System UIDs Inconsistent. UIDs on the system are inconsistent, you need to wipe your data partition or your device will be unstable." and the system didn't respond.
I performed a factory reset via stock recobey and kitkat showed the same message but let me in the "i´m feeling lucky button" worked this time. there I noticed that my device was now rooted but non app was able to access the internal memory due to some r/w permissions as I think, because when I try to copy files to the phone via USB cable, I get have the same denial, even whit ADB push i get the same message of permissions denial.
I need a way to solve this because in this actual stage the phone works but the apps have like no access to the memory making them unusable,
for example i cannot take a picture, or download a file, for some reason all google apps not work or force close every time.
I need a way to upload a .img file to the phone in order to perform a recobery or to make a fresh install via fastboot, donn't know how to make the phone let me wrhite files on it. :crying:
(note: sorry for my bad English)
A Wild Willis said:
I tried o revert to 4.3 but when flashing boot.img it said hab check failed for boot and now when i try to boot up it goes to the unlock booloader warning turns off and repeats. I can get back to fastboot but when i try to enter recovery it shows a broken android lying sideways. I think i bricked my phone. I really need help
Click to expand...
Click to collapse
As long as you can enter the bootloader you haven't bricked anything!!! so don't you worry!
I have two questions: when did you download the stock rom, did you check the MD5 ??? Are you sure that it wasn't a bad download ?
Additionally: are you sure that you have downloaded the appropriate ROM? Did you try to flash any other ROM?
will8578 said:
I too have suffered with this problem, today i have done as above said, reflashed 4,3 but when i onstalled the cwm 4.3 version i still suffered the same problem, so i tried the cwm4.4 and hey presto, i now have cm11 on my phone, yee haaa
Click to expand...
Click to collapse
i'm having troubles too...
tried to install custom roms (c-rom and liquid rom), coming from 4.4 (unlocked and rooted) stock but it stays at the bootanimation.
flashed a stock 4.3, rooted installed, tried 2 recoveries (cwm and twrp), tried c-rom once more...
same problem :crying:
i've run out of options, so have to flash a stock 4.4 again, unless someone gives me thé idea what i can do to make it work.
xt1032
dreezz said:
i'm having troubles too...
tried to install custom roms (c-rom and liquid rom), coming from 4.4 (unlocked and rooted) stock but it stays at the bootanimation.
flashed a stock 4.3, rooted installed, tried 2 recoveries (cwm and twrp), tried c-rom once more...
same problem :crying:
i've run out of options, so have to flash a stock 4.4 again, unless someone gives me thé idea what i can do to make it work.
xt1032
Click to expand...
Click to collapse
I am having the same issue. I got this xt1032 after it was OTA upgraded to Lollipop 5.0.2 and I downgraded it to KitKat 4.4.4 Stock. Now I'm also getting stuck on the boot animations on every Custom ROM I try to flash on it.
Does anyone know if having the bootloader upgraded due to the Lollipop update has anything to do with this? mine is at Ver. 41.18.
EDIT: I was finally able to flash after Formatting Data from Recovery. Keep in mind this will basically delete everything from the internal storage and you need to put everything back there manually. Always make sure you backup your info/apps/music/fotos before Formatting Data.
Hi, I have bought a samsung tab 3 sm-t311 in China and since they everything related to google, I rooted it and installed CWM,
I installed this rom here with CWM: http://forum.xda-developers.com/showthread.php?t=2404877
Installation was successful but I get this messages when launching my device:
- setup wizard isn't responding. Do you want to close it?
I close it, then:
- Unfortunately, the process android.process.media has stopped.
I press ok, then:
Unfortunately, Samsung keyboard has stopped.
I press ok then:
- Process system isn't responding. Do you want to close it?
I press ok
And it keeps coming back over and over...
What should I do?
Backup
anthony239 said:
Hi, I have bought a samsung tab 3 sm-t311 in China and since they everything related to google, I rooted it and installed CWM,
I installed this rom here with CWM: http://forum.xda-developers.com/showthread.php?t=2404877
Installation was successful but I get this messages when launching my device:
- setup wizard isn't responding. Do you want to close it?
I close it, then:
- Unfortunately, the process android.process.media has stopped.
I press ok, then:
Unfortunately, Samsung keyboard has stopped.
I press ok then:
- Process system isn't responding. Do you want to close it?
I press ok
And it keeps coming back over and over...
What should I do?
Click to expand...
Click to collapse
try fixing permissions in cwm/twrp ,if it does not help then restore your nandroid backup or ask the rom developer for the problem..
it might help you
roshan77ss said:
try fixing permissions in cwm/twrp ,if it does not help then restore your nandroid backup or ask the rom developer for the problem..
it might help you
Click to expand...
Click to collapse
Hi, thanks for replying. I cannot post in the topic of the rom because I am new on the forum (what I get when I try to post something overthere).
Could you please explain me how to fix the permissions in CWM?
I am a beginner who been trying to fix his tablet for a week now, but I still dont understand everything since I cant put all my time on it... If its not about following tutorials step by step, i am lost...
I also tried the fast team one, without any success, when the rom is installed and the device is rebooted, this time the screen stay blocked on "samsung galaxy tab3" for years!!!
sorry, i meant the fast dream rom
I just tried to Flash three roms from sammobile.com (one from hong-kong, one from spain and one from germany) through Odin.
Everytime I get I click on AP to load the rom on odin, I get this message:"md5 error! Binary is invalid".
Since I have rooted the tablet using odin to instal CWM, when I boot the tablet in download mode, I can see:
- PRODUCT NAME: SM-T311
- CURRENT BINARY: Cusom
- SYSTEM STATUS: Custom
Is it related? Someone help plz...
The question is do i really have to install a new rom, now that the tablet is rooted with CWM on it, can't do any manipulation to allow the chinese rom to accept google playstore etc...
My biggest problem with the chinese rom that comes with it is that i cant install download google playstore, i installed it but everytime i open it, it closes right away. Not google nor other google apps available neither since it was sold in china...
anthony239 said:
Hi, thanks for replying. I cannot post in the topic of the rom because I am new on the forum (what I get when I try to post something overthere).
Could you please explain me how to fix the permissions in CWM?
I am a beginner who been trying to fix his tablet for a week now, but I still dont understand everything since I cant put all my time on it... If its not about following tutorials step by step, i am lost...
Click to expand...
Click to collapse
You should be able to post on ROM forum now(as you've reached 10 posts.
And the fix permissions option should be in 'advanced' section in CWM(not sure, I use TWRP recovery)
The Dork Knight Rises said:
You should be able to post on ROM forum now(as you've reached 10 posts.
And the fix permissions option should be in 'advanced' section in CWM(not sure, I use TWRP recovery)
Click to expand...
Click to collapse
Yea im able to post over there now, thx
backup
anthony239 said:
The question is do i really have to install a new rom, now that the tablet is rooted with CWM on it, can't do any manipulation to allow the chinese rom to accept google playstore etc...
My biggest problem with the chinese rom that comes with it is that i cant install download google playstore, i installed it but everytime i open it, it closes right away. Not google nor other google apps available neither since it was sold in china...
Click to expand...
Click to collapse
dont you have cwm backup? if not then flash stock firmware ,find proper odin flashable packages for your device.
always make backup before flashing any rom.
anthony239 said:
Yea im able to post over there now, thx
Click to expand...
Click to collapse
So, could the devs help??
(<---And you don't need to say thanks and spam the thread, that what the button's for)
The Dork Knight Rises said:
So, could the devs help??
(<---And you don't need to say thanks and spam the thread, that what the button's for)
Click to expand...
Click to collapse
In the end, I just used a previous version of Odin (3.4 instead of 3.9) to flash an original stock rom.
Now the problem is that I have a new CWM that works with the volume up, volume down button, and this menu:
- reboot system now
- apply update from ADB
- apply update from external storage
- zipe data/factory reset
- wipe cache partition
- apply update from cache
Since the rom is not really good, i wanted to flash another one (one of those we just talked about), but the backup i did with the previous CWM i had (Philz Advanced CWM 6.08.90) is nowhere in the tablet anymore (i dont have any sd card) and i dont know how to make a back up with this CWM...
So now the question is how to make a backup with this version of CWM so I can try to flash other roms, or how to get the version that i had before without takin any risk of brickin the device (so i can make another backup and try to flash another)
anthony239 said:
In the end, I just used a previous version of Odin (3.4 instead of 3.9) to flash an original stock rom.
Now the problem is that I have a new CWM that works with the volume up, volume down button, and this menu:
- reboot system now
- apply update from ADB
- apply update from external storage
- zipe data/factory reset
- wipe cache partition
- apply update from cache
Since the rom is not really good, i wanted to flash another one (one of those we just talked about), but the backup i did with the previous CWM i had (Philz Advanced CWM 6.08.90) is nowhere in the tablet anymore (i dont have any sd card) and i dont know how to make a back up with this CWM...
So now the question is how to make a backup with this version of CWM so I can try to flash other roms, or how to get the version that i had before without takin any risk of brickin the device (so i can make another backup and try to flash another)
Click to expand...
Click to collapse
Are you sure the new recovery is CWM and not stock recovery?? If you flashed stock ROM, it should've given you stock recovery again...
(Does it show the CWM hat logo in the background?)
The Dork Knight Rises said:
Are you sure the new recovery is CWM and not stock recovery?? If you flashed stock ROM, it should've given you stock recovery again...
(Does it show the CWM hat logo in the background?)
Click to expand...
Click to collapse
Actually, yea its the stock recovery, so should i reroot the phone to install CWM, make a backup just in case, flash another stock rom which i find better, and then try to flash this one in recovery mode?
anthony239 said:
Hi, I have bought a samsung tab 3 sm-t311 in China and since they everything related to google, I rooted it and installed CWM,
I installed this rom here with CWM: http://forum.xda-developers.com/showthread.php?t=2404877
Installation was successful but I get this messages when launching my device:
- setup wizard isn't responding. Do you want to close it?
I close it, then:
- Unfortunately, the process android.process.media has stopped.
I press ok, then:
Unfortunately, Samsung keyboard has stopped.
I press ok then:
- Process system isn't responding. Do you want to close it?
I press ok
And it keeps coming back over and over...
What should I do?
Click to expand...
Click to collapse
Try fix or patch.
Or come back to stock rom.
anthony239 said:
Actually, yea its the stock recovery, so should i reroot the phone to install CWM, make a backup just in case, flash another stock rom which i find better, and then try to flash this one in recovery mode?
Click to expand...
Click to collapse
Yup, I think you'd better to start over again. Try take a look at this : http://forum.xda-developers.com/showthread.php?t=2401901
It works well for my SM-T311 :good: Then you can reroot and make a backup from TWRP easily.
I also suggest you to take a look at this too : http://forum.xda-developers.com/showthread.php?t=2522091 From there, you can get PhilZ touch recovery based on CWM v.6.0.4.5
anthony239 said:
Actually, yea its the stock recovery, so should i reroot the phone to install CWM, make a backup just in case, flash another stock rom which i find better, and then try to flash this one in recovery mode?
Click to expand...
Click to collapse
That's right, look at @Ferris Cruiser's post above. Should help.
(<---Remember to thank him and me if this helps.:good
Ok, my problem is resolved now.
- I had to use the previous version of Odin (3.4) to flash a rom from sammobile.com
- Then, I rooted the phone, reinstalling CWM philz version
- I did a backup using CWM
- Finally I flashed the custom rom using CWM
Thank u all for helping
anthony239 said:
Ok, my problem is resolved now.
- I had to use the previous version of Odin (3.4) to flash a rom from sammobile.com
- Then, I rooted the phone, reinstalling CWM philz version
- I did a backup using CWM
- Finally I flashed the custom rom using CWM
Thank u all for helping
Click to expand...
Click to collapse
Glad to help! :good:
HELP
I bought a Samsung Galaxy Tab 3 SM-T311 in Mainland China last month and I cannot install google play can anyone help.