Ok guys so I have managed to root my i9023 and flash clockwork recovery which was all good, I set about flashing some new roms via rom manager, again, all good.
So now I settle on this cm7 based rom which I love, used anim mod to get some nice transitions, then I used font changer.
All was good, then I decided that the font I was using was a bit ott so I decided to change it again, upon reboot it starts boot looping, bollocks !!!
So I try to get into clockwork recovery, and it seems to have gone back to the stock bootloader, grrrrr
I re flash clockwork, wipe / clear etc... then flash the rom again, but it would not flash, so I went to my backup of stock n flashed that, all good.
I then install rom manager again and flash the rom I liked again, this time no problem, but when it loads up the home button and search button are not working
So i decide on a factory reset, I select wipe everything including sd just to be sure but it comes up "error null"???
So now I wipe the sd manually and then do the reset and it works, ok, I re load everything on from scratch and all is good, but when I installed rom manager it says that clockwork recovery IS NOT installed again
Can anyone here work out from my ramblings WTF is going on???
I dont get why the font changer all of a sudden caused a boot loop, as I had changed font about 15 times with it without issue, also why clockwork recovery will not stick anymore after a reboot, when before it did and I have not changed a thing!
Cheers!!!
Rename install-recovery.sh in system/etc to something else, flash cwm recovery again, this time it'll stick until you install a stock rom again.
Rom manager is causing more problems than it's saving time, hence I don't use it.
Sent from my Nexus S using XDA App
Thanks for the reply, can you go into detail on what exactly I need to do to get clockwork to stick? I still hold noob status!
Thanks!
Also rom manager seems fine, I flashed loads of roms with it with no issue, I also rebooted a few time at least between flashes so I dont get why clockwork suddenly decided to jump ship.
It was the font changer that f&%ked it all up for me, or anim mod (which I wont touch now even tho I miss the wicked transitions).
When using Font Changer, it's better to do a reboot manually instead of selecting Reboot from within the program. That sometimes cause me a boot loop too. But after turning the phone off / on a.k.a. "reboot manually", the phone boots fine.
To elaborate what rentaric said, use Root Explorer and go to /system/etc/, there should be a file named install-recovery.sh. This file is responsible for flashing the stock recovery every time the phone boots. If you rename it to something else e.g. install-recovery.sh.bak then CWM will stick on reboot.
Thanks, but when I get into the /system/etc/ there is not file called install-recovery.sh.
The only .sh in there is init.goldfish.sh
Any ideas???
bump...............
Flash cwm rec and either stock or custom rom.
Stock rom incl the .sh you want.
Sent from my Nexus S using XDA App
I've read on these forums that using Clockwork on the I9023 is a no-go. Serves up incompatible ROMs, etc.
BTW, I'm looking to root my I9023. Can the OP please point me to the method he used.
athani said:
I've read on these forums that using Clockwork on the I9023 is a no-go. Serves up incompatible ROMs, etc.
BTW, I'm looking to root my I9023. Can the OP please point me to the method he used.
Click to expand...
Click to collapse
LINK: http://forum.xda-developers.com/showthread.php?t=1007782
Please read the whole thread, if I had it would have saved me half a night scratching my head...lol
rentaric said:
Flash cwm rec and either stock or custom rom.
Stock rom incl the .sh you want.
Sent from my Nexus S using XDA App
Click to expand...
Click to collapse
Yeah I have a custom rom installed, supercm7, but the install-recovery.sh. that I have been told is causing the problem of clockwork disappearing is not in the /system/etc/ folder, so I am asking if there is anything else that could be causing me to have to re flash clockwork via my pc every time I want to change rom?
I will tell you exactly what happens.
1. I go into rom manager
2. download a rom and choose flash rom from sd card
3. it asked if I want to wipe etc, i select yes
4. phone re boots and I get ! with an android
5. I pull the battery, hold volume up n power and boot / connect to my pc
6. re flash clockwork via SDK
7.the phone then load the new rom on its own
Before it would just flash the rom without me having to install clockwork again.
install-recovery.sh is only there if you're using a stock android rom.
"so I am asking if there is anything else that could be causing me to have to re flash clockwork via my pc every time I want to change rom?"
ROM Manager.
It's not a reliable working tool for ME as I'm changing ROMs/kernels on a regular basis and it might not work reliable the one time you need it.
Thanks for that, I may just sack rom manager then.
Its a shame as I flashed several roms with it without issue.
Oh well, loving this supercm7 so gonna stick with it untill an update comes out.
Many thanks to all who have replied, clicking the thanks buttons now!
I had the same problem but i installed a previus recovery and works fine formeforme
Sent from my Nexus S 4G using XDA Premium App
Related
I am lost.
I had FireFly 2.05 on my SGS (ATT US version) and was going to update to 2.1. I followed the procedure as I aways do; ODIN 1 click to stock rom, master clear, copy update.zip and rom file and reboot into recovery. This time however I get the following error
E:Can't symlink /system/xbin/su SYSTEM:bin/su
E:Failure at line 14
I checked some notes on this and found out that it might be a currupt file. So I re-downloaded FireFly2.1 again and transfered the file to the internal SD card. The outcome was the same.
Then I copied the original 2.05 version back which I know was fine and I still get the same error. Even after a full stock 1-click and master clear the above error will not go away.
Is my internal SD card messed up? Or am I missing something else?
It's running stock right now and all seems to work fine, but I cannot stand all the bloatware and other crap ATT puts on the phone and really want to try FireFly2.1.
Any help is greatly appreciated.
Thanks.
Did you flash clockwork recovery
Did you root the phone after you flashed back to stock?
Sent from my SAMSUNG-SGH-I897 using XDA App
Agree with DaveyBB - sounds like you are not rooted.
Sent from my SAMSUNG-SGH-I897 using XDA App
You do not need to root on stock just flash clockwork with update zip
The update.zip i use is the current clockwork recovery.
I boot into the stock e2 recovery, then apply cw recovery and update the rom. Never had to root stock before when i update via cw recovery.
I will try to root stock first this time and then apply rom via recovery.
Thx
Sent from my SAMSUNG-SGH-I897 using XDA App
anosis said:
The update.zip i use is the current clockwork recovery.
I boot into the stock e2 recovery, then apply cw recovery and update the rom. Never had to root stock before when i update via cw recovery.
I will try to root stock first this time and then apply rom via recovery.
Thx
Sent from my SAMSUNG-SGH-I897 using XDA App
Click to expand...
Click to collapse
To install clockwork select reinstall packages twice
The issue is not with cw recovery. I am already in it, but the error that i get is after i click "yes apply this zip"... The script starts to format the system, data, datadata, etc. And then this error shows up after files ate copied
Sent from my SAMSUNG-SGH-I897 using XDA App
Have you tried re download of rom package?
My only guess is that clockwork and the rom are not working well. I would try downloading a different clockwork
Sent from my SAMSUNG-SGH-I897 using XDA App
mcord11758 said:
Have you tried re download of rom package?
Click to expand...
Click to collapse
Done that too.
So just to reiterate...
I had FireFly2.05 running and many other cooked Android 2.1 and 2.2 roms before this. I follow the instrution of the cooks to the 't' on how to update to the newest rom and never had any issue.
This time I downloaded FireFly2.1 and also Phoenix4.5 from the respective cooks and followed the instructions as usual. The issues does not show up until the 'copy files' part of the script is running (formating of the filesystem already passed).
All I can imagine are these:
1) The transfer from the PC to the Phone is corrupt (ruled out the download from the net as even the existing FireFly2.05 rom no longer loads)
2) The internal SD card is messes up
3) There is some configuration change I am not aware off that prevents the install of the cooked rom.
Maybe try to reformat sd through clockwork
Problem solved, kind of.
My desktop PC, which I always use to transfer the files is somehow responsible for the error I get in CWM recovery. I ended up using my laptop to transfer the ROM to the phone and it worked again.
Something is messing up the USB transfer? That seems very odd but I am glad it's not the phone that caused the issue.
If I find out what the issue is with my Desktop I will post again just in case this rather rare issue might happen to someone else.
anosis said:
Done that too.
So just to reiterate...
I had FireFly2.05 running and many other cooked Android 2.1 and 2.2 roms before this. I follow the instrution of the cooks to the 't' on how to update to the newest rom and never had any issue.
This time I downloaded FireFly2.1 and also Phoenix4.5 from the respective cooks and followed the instructions as usual. The issues does not show up until the 'copy files' part of the script is running (formating of the filesystem already passed).
All I can imagine are these:
1) The transfer from the PC to the Phone is corrupt (ruled out the download from the net as even the existing FireFly2.05 rom no longer loads)
2) The internal SD card is messes up
3) There is some configuration change I am not aware off that prevents the install of the cooked rom.
Click to expand...
Click to collapse
One Question:
What method are you using to enter recovery method when you attempt to flash the rom? And what color is your recovery menu (should be green)?
(Don't go into recovery via rom manager. Try entering recovery via your advanced power menu)
bames said:
One Question:
What method are you using to enter recovery method when you attempt to flash the rom? And what color is your recovery menu (should be green)?
(Don't go into recovery via rom manager. Try entering recovery via your advanced power menu)
Click to expand...
Click to collapse
I don't think he's getting into Clockwork via ROM Manager, as he's said multiple times he's using the CWM update.zip; reinstalling packages in 2e recovery to get to CWM.
He's also said he doesn't believe this to be an issue with Clockwork (and I don't either). And I'm also pretty sure we're not dealing with newbie mistakes of Android Recovery vs. Clockwork Recovery.
any chance you're leaving your usb plugged into your cappy while you're trying to flash it?
Just wondering if anyone here might have an idea what's going on...
I was previously running CM7 RC1 but a few things have been a bit strange so I decided to go back to my pre-CM7 nandroid and wipe my phone.
Now, when I flash CM7 I get bootloops. Anyone have any idea what might have happened?
Thanks!
Fixed?
Not sure which of these did it, but...
Installed busybox
Installed rom manger
Installed CM7 via rom manager and picked a different zip file
Seemed to work. CM7 is up and running again (#38 because that's the file I had).
Another question though... whenever I try to reboot into recovery, I get the Android logo with the !. I have to pull the battery and fastboot from my computer. Does anyone know why? I renamed the install-recovery.sh and Rom Manager says I have CWM 3.0.0.5 installed.
kaimyn said:
Not sure which of these did it, but...
Installed busybox
Installed rom manger
Installed CM7 via rom manager and picked a different zip file
Seemed to work. CM7 is up and running again (#38 because that's the file I had).
Another question though... whenever I try to reboot into recovery, I get the Android logo with the !. I have to pull the battery and fastboot from my computer. Does anyone know why? I renamed the install-recovery.sh and Rom Manager says I have CWM 3.0.0.5 installed.
Click to expand...
Click to collapse
Press the home button on the phone then the menu will appear
hutzdani said:
Press the home button on the phone then the menu will appear
Click to expand...
Click to collapse
Didn't seem to work for me. Thanks though.
Try wiping EVERYTHING and even formatting the "sdcard" partition on the phone. Then flash everything again and flash a custom kernel. Should work.
I have a NS unlocked and rooted. I have ROM Manager, busybox etc. I followed all the instructions but I can't update ROMs or the 2.3.3 update or CM7 nothing. Each time it starts to unpack or whatever it gets about 1/3 the way and aborts. Something about verifying signatures or something.
Very frustrating.
Thanx in advance
I Love The Smell Of Burnt Rubber Anytime
try to download the ROM again
sounds like the zip file is corrupted
What version Clockwork Recovery are you using? Try reverting back to a older version or something.
Verify the ROM's MD5 Hash using HashTab (Google it)
I've tried several times with downloads and now the latest clockwork and the version prior.
Samething always aborts, can't verify signature. Tried manual and through rom manager.
When using rom manager is that suppose to do the whole install? Cuz that only gets me to the little droid and the triangle. I have to get myself into bootloader and continue manually from there.
Thanks
I Love The Smell Of Burnt Rubber Anytime
hllywd said:
I've tried several times with downloads and now the latest clockwork and the version prior.
Samething always aborts, can't verify signature. Tried manual and through rom manager.
When using rom manager is that suppose to do the whole install? Cuz that only gets me to the little droid and the triangle. I have to get myself into bootloader and continue manually from there.
Thanks
I Love The Smell Of Burnt Rubber Anytime
Click to expand...
Click to collapse
what's the latest clockwork recovery? did you try 3.0.0.5?
Ya. The new ver is 3.0.2.4
I Love The Smell Of Burnt Rubber Anytime
hllywd said:
I've tried several times with downloads and now the latest clockwork and the version prior.
Samething always aborts, can't verify signature. Tried manual and through rom manager.
When using rom manager is that suppose to do the whole install? Cuz that only gets me to the little droid and the triangle. I have to get myself into bootloader and continue manually from there.
Thanks
I Love The Smell Of Burnt Rubber Anytime
Click to expand...
Click to collapse
Hmm... It sounds like clockwork isn't properly installed. ROM Manager should take you directly to clockwork recovery without you having to do anything.
the problem you are facing is that you are still on stock rom. so even if you flash clockwork recovery and then reboot to recovery, you'll always end up going to the stock recovery. this is a new feature implemented by google.
what you should do is...
1) go to bootloader
2)flash the clockwork recovery using fastboot
3)DO NOT reboot the phone or quit bootloader. immediately after flashing the rec. using fastboot, just enter recovery (through bootloader)
4)flash you new rom
just for u to have an idea. the recovery should be orange in colour.
option 2.
you also have the option of using a file manager with moun/root functions such as root explorer and rename the recovery script in etc folder but i guess step 1 is much easier for now.
OK I played alot today and this is what happened.
After fixing permissions and flashing the new CWM and wiping data/cache it finally worked. Unfortunately titanium and my backup didnt bring everything over. So I went back and forth between stock and CM7 several times but I just couldnt get all my stuff back in CM7. So I thought Id try the 2.3.3 update but not wiping stuff. That didnt work. Then I tried one more time with CM7 but not wiping. I couldnt get pastthe little CM7 droid on the skateboard. So went back to stock for now. Ill have more time on Sat to give things another try.
At least I can get in it now.
Any ideas/thoughts/
Thanks and sorry for the long post.
Using following the cyanogen wiki LG G2x Full Update tutorial
I got clockwork and everything else working, but when I download cyanogen 7 and tell it to install it, the directions get a little fuzzy. I don't know exactly what to do in the root menu. I thought I'd just hit the 1st reboot option, but that just loads the phone normally with stock ROM.
I just started experimenting with different options, like factory reset, thinking maybe this would be the option to run cyanogen, but now I think I undid almost everything and I'm back to square one (Except superuser is still installed for some reason)
HELP! I donate
Owens867 said:
Using following the cyanogen wiki LG G2x Full Update tutorial
I got clockwork and everything else working, but when I download cyanogen 7 and tell it to install it, the directions get a little fuzzy. I don't know exactly what to do in the root menu. I thought I'd just hit the 1st reboot option, but that just loads the phone normally with stock ROM.
I just started experimenting with different options, like factory reset, thinking maybe this would be the option to run cyanogen, but now I think I undid almost everything and I'm back to square one (Except superuser is still installed for some reason)
HELP! I donate
Click to expand...
Click to collapse
After you dload rom go to recovery, wipe cache, wipe dalvik cache, wipe data, wipe system, select install zip from sd, search for zip (cm7 rom u dloaded) and flash, then reboot.
NVIDIA NEVER AGAIN!
Look here and follow the instructions. http://forum.xda-developers.com/showthread.php?t=1274998 If you flashed cwm via nvflash then go straight here. http://theunlockr.com/2011/05/03/how-to-load-a-custom-rom-on-the-t-mobile-g2x
Let us know if this is enough.
p.s. you navigate cwm via the volume keys and confirm via the power button.
edit: if you want google apps (gapps) get it here and flash immediately after flashing cm7. http://goo-inside.me/gapps/
Wow thanks for the nvflash link. I was able to flash cm7 with it no problem! Now when you say flash immediately after cm7, do you mean right after it installs cm7 while still in the root?
After my prior troubles, I am no longer assuming anything :|
Owens867 said:
Wow thanks for the nvflash link. I was able to flash cm7 with it no problem! Now when you say flash immediately after cm7, do you mean right after it installs cm7 while still in the root?
After my prior troubles, I am no longer assuming anything :|
Click to expand...
Click to collapse
Yes, I did mine via CWM though so I'm not as familiar with the way you're going about it. The main "trick" is that you have to flash CWM via nvflash not ROM manager, I learned that one the hard way. On the bright side it's nearly impossible to permanently brick this phone.
Sorry about the delay in reply, I'm at work so I'm not able to pay tons of attention to the forum.
You are not at a "root" menu. It is Clockworkmod Recovery menu. There is no such thing as a root menu.
So I rooted my brother's infuse 4G because it was slow as sin and needed A. a data/cache wipe and B, I wanted to give him Jellybean
I followed all the instructions I could; rooted, installed the modded 3e (or thought I did), got a CWM installed afterwards, and then set about installing first CM9 (as the Jellybean ROM post says I should) followed by the actual ROM and its Gapps. Well, I installed CM9 (although it seemed to take all of 30 seconds, rather fast...) when I tried to wipe data/factory reset, CWM froze. I rebooted and from then on I had it softbricked. Stuck booting at the samsung logo, and when I tried to return to the recovery, the recovery was a garbled mess that looked like a scrambled TV channel. I used Heimdall and did the one-click reset to stock, and here I am. The phone boots to stock just fine, but my recovery is still completely boned.
Do I re-root? How do I install CWM again without being able to install 3e? (can't install 3e without a working recovery in the first place, after all..)
One anomaly of note - when I was going about all this, booting the phone into recovery always got me 3e, even after installing CWM. I had to manually install CWM by using an update.zip and "reinstall packages" every time I wanted to use CWM. ROM manager would boot me to CWM, but it took several reboots and a flashable CWM zip before I could even get CWM installed in the first place - ROM manager refused to do it the easy way.
What did I do wrong, and more importantly, how do I get back on track? What do I do to put a fixed recovery back on this thing? Odin? ADB?
Today was the first time I ever used Heimdall, I've been a fair weather flasher since the beginning, I've never had to ADB or Odin.
It sounds like you didn't install cwm recovery properly, but I'm not sure I've never ran into this problem before. If you go here
http://forum.xda-developers.com/showthread.php?t=1524081 and carefully read over the first and second post you should end up with gb and red cwm recovery. The way I've done it was to put the phone in dl mode and flash the first package (the stock gingerbread att rom). After it is installed and booted up, I then power it off and go back into dl mode. Then flash the second package, which is just the kernel and red cwm recovery, (be patient because it takes awhile). Once that is done then go into recovery and wipe data/factory reset, wipe dalvik cache, wipe system, and install cm9. I think it only installs the kernel and recovery the first installation after formatting and creating the partitions, but after its done you have to go through the menus and tell it to reboot. After it reboots it will be stuck at the cyanogenmod galaxy s logo, so you will have to go into recovery once more. When you're there you should have blue cwm (only continue if you do) and install jb, without actually having to install the full cm9. When you navigate to which ever jb rom you want to install, a prompt will appear stating that there is incompatible partition layout and to confirm installation you will have to reselect the jb zip again to install. It will flash pretty quick because at this point its doing the same thing as when you went from gb to cm9 and only installs the kernel, recovery, and reformat/creates the partitions, (I think). It will reboot on its own but it will take you back into recovery. At this point all you have to do is navigate to the same jb zip you want to install and flash it, followed by gapps, and then reboot system. This process has worked for me but I highly recommend reading and following the instructions given in the post above.
Use goo.I'm app. Also you need to flash GB bootloaders in Odin . is recovery all colorful? If you see recovery fine just get goo app on play store and install a recovery
Sent from my SAMSUNG-SGH-I317 using Tapatalk
I would go the ODIN route, I have bricked so many times because i try to make the impossible possible. Just search for a already rooted pda,mdr file. I skipped the cm9 part idk if that would make things better or not but as my post says im a risk-taker
One thing I'd like to point out, flashing to ICS from GB requires 2 flashes. First flash sets the new partitions. You reboot and pull the battery, then boot back into recovery and reflash with the gapps.
That was the first problem I saw, and now commenting while on the Nexus I can't see the OP so that's all I'll comment on.
Sent from my Nexus 7 using xda premium
UnhoIy said:
One thing I'd like to point out, flashing to ICS from GB requires 2 flashes. First flash sets the new partitions. You reboot and pull the battery, then boot back into recovery and reflash with the gapps.
That was the first problem I saw, and now commenting while on the Nexus I can't see the OP so that's all I'll comment on.
Sent from my Nexus 7 using xda premium
Click to expand...
Click to collapse
but if don't have any problems i'm good right or should i go back and do it
MajorLeagueROM said:
but if don't have any problems i'm good right or should i go back and do it
Click to expand...
Click to collapse
I've never skipped ICS and gone straight to JB like you, that's risk I've yet taken. I guess if you've had no problem then you're good, but I've gone back to stock and to JB at least 12 times now and used the same process every time without a hitch. In the case of OPs problem, I would just go back to stock and try again. Although I always go back to 2.2 stock...
Sent from my SGH-I997 using xda app-developers app
UnhoIy said:
I've never skipped ICS and gone straight to JB like you, that's risk I've yet taken. I guess if you've had no problem then you're good, but I've gone back to stock and to JB at least 12 times now and used the same process every time without a hitch. In the case of OPs problem, I would just go back to stock and try again. Although I always go back to 2.2 stock...
Sent from my SGH-I997 using xda app-developers app
Click to expand...
Click to collapse
I'll just do it tonight then maybe my phone will run better, i thought i'd be a waste of time. thanks for the info
MajorLeagueROM said:
I'll just do it tonight then maybe my phone will run better, i thought i'd be a waste of time. thanks for the info
Click to expand...
Click to collapse
Lucky me, I get to go back to stock tonight for soft-bricking for the first time having this phone. It's what I get for trying to port a ROM with only a nights worth of research.
Oh well.
UnhoIy said:
Lucky me, I get to go back to stock tonight for soft-bricking for the first time having this phone. It's what I get for trying to port a ROM with only a nights worth of research.
Oh well.
Click to expand...
Click to collapse
lol it happens to the best of us