hi
this is the first time you use the forum besides that I'm using a translator, so sorry if something is not understood.
this is the problem.
the touchscreen stops working when the screen turns off. when this happens the only way it will work is to remove the battery and on again, if the screen does not turn off the touchscreen working properly all the time.
I think it is problem softwere, but I did all the wipes and still the same.
firmwere want to reinstall but I'm not sure which is the one I need, because it is the first clone with that work.
the model is
mt6572
thank you for your help
Related
today i flashed a new rom
as u all know the "align screen" setup is the first that starts within the initial setup
but it wont complete, it just starts over and over again
i remember that i had the same problem during the last rom i used but i just killed the process and forgot about it, but now i cant kill it bcs its newly flashed
did any of u had the same problem before?
ok solved , after getting a bit angry and googling for 30 min i hammered a bit harder with my finger
dont ask me why but this helped at the first try
maybe some of u could explain why that is and/or how to get it better solved
This is supposed to be a CALIBRATION screen. It expects you to be as precise as possible. Using your finger instead of a stylus is usually not precise enough, and being detected as such, hence the calibration restart. All you really had to do is use the stylus, not your finger. Pressing harder with your finger makes it easier on this type of the screen to detect it's location, hence results in a little bit better precision. Thats the reason it allowed you to pass that screen after all.
sry for the late answer
im using the stylus ofc, but this aint help any much
only when i use my finger and press a bit harder im able to "calibrate"
installed some roms since my first post and the problem stays
Hello friends, I am Brazil, sorry for my english ...
I'm having the same problem to calibrate the screen on my HTC TOUCH CRUISE (P_3650), researched several posts, but could not solve the problem, I installed other ROMS, but also not resolved the problem, returned to ROM 6.0 ORIGINAL factory, but after a while the screen loses calibration is not working anymore ...
I ask to help me solve this problem ...
Thanks
My navigation buttons have stoped working then I moved to CM 9 and used on screen navigation buttons.
And suddenly in the evening touch screen stopped working I flashed XXKPE but no use so its is a hardware fault.
So What is the cost of replacing the whole touch screen in India.?
Plz help mee.
Hi!
I experienced the same thing before.. and this is how i got mine fixed: http://forum.xda-developers.com/showthread.php?t=1680175
maybe it will help you out on this matter as well
Hope this will help, Cheers
So I have a problem with my CUBE U30GT-H. I bought it almost 3 months ago, all have worked very well, but now touch screen doesn't.
Problem occurs when I have to unlock screen, it simply doesn't work after sleep. But when I restart it works again, tablet totally works with my mice. I tried to wipe cache and reinstall firmware, but nothing changed. So i think it will be a good option if touch screen doesn't shut down when tablet put to sleep. I was searching for a touch screen config, but didn't find. I hope you can help me with problem and give some ideas.
Now I use this firmware Evolution JB 1.0.2 ( flashmyandroid.com/forum/showthread.php?1192-Release-Evolution-JB-1-0-2-27-08-2012 )
P.S. I am new on this forum so I don't know where to put this question. sorry...
Hello good people
Firstly, i want to say that i searched the forum for this and i couldn't find an answer or a solution to my problem. So here it is:
I have a SGS Plus I9001 which cannot stay ON more than 1 sec. I turn on the phone, all the logos and texts pass, but when the menu shows, after 1-2 seconds the phone turns off completly or restarts itself. I have a long hisoty with my phone however :cyclops: I used a normal 2.3.6 android and then switched to CyanogenMod 10.1. It worked just fine. I was very, very happy with it. One night i left the phone charging and when i woke up in the morning, the phone was dead. Completly DEAD! Services change the whole motherboard and the phone worked just fine for about 1-2 hours and then this happened. I opened it up and saw that the motherboard shows "SGH-T959". I tried installing stock roms, different versions of Cyanogen and Kernels but nothing can turn on the phone and make it work. It just restarts itself. The only thing i ave managed to install via Odin is CWM Recovery.. However, my knowledge of this is limited so here i am seeking for your assistance
PS. I tried changing the power button but no luck.. still the same..
If anyone is interested in this problem, please post an answer or question (if you need more information)..
Thank you!
Deni
My Galaxy S Duos has a problem with the touch screen, I recently installed a kernel in it, and suddenly the touch it stopped working, it will work again once in a while, but only for a few minutes and then it stops again, I know if the touch will not work because when the touch dont work the phone takes at least 5 minutes to turn on, and when the touch works he turns on in less than 1 minute, i'm needing help because I will not be able to take to warranty, as my flash counter listed as modified = / ... I also want to know a quick way to reset the flash counter and put the status as official ..
sorry if I missed a few words, I am Brazilian and not speak English very well