My Galaxy S Duos has a problem with the touch screen, I recently installed a kernel in it, and suddenly the touch it stopped working, it will work again once in a while, but only for a few minutes and then it stops again, I know if the touch will not work because when the touch dont work the phone takes at least 5 minutes to turn on, and when the touch works he turns on in less than 1 minute, i'm needing help because I will not be able to take to warranty, as my flash counter listed as modified = / ... I also want to know a quick way to reset the flash counter and put the status as official ..
sorry if I missed a few words, I am Brazilian and not speak English very well
Related
So I have a problem with my CUBE U30GT-H. I bought it almost 3 months ago, all have worked very well, but now touch screen doesn't.
Problem occurs when I have to unlock screen, it simply doesn't work after sleep. But when I restart it works again, tablet totally works with my mice. I tried to wipe cache and reinstall firmware, but nothing changed. So i think it will be a good option if touch screen doesn't shut down when tablet put to sleep. I was searching for a touch screen config, but didn't find. I hope you can help me with problem and give some ideas.
Now I use this firmware Evolution JB 1.0.2 ( flashmyandroid.com/forum/showthread.php?1192-Release-Evolution-JB-1-0-2-27-08-2012 )
P.S. I am new on this forum so I don't know where to put this question. sorry...
Hello, together
I have a GT I9082L and I notice that it has a big problem. After approximately a year using it, I can`t stand it anymore.
The problem is the following: when I wake grand duos up, the first 2 seconds, my finger isn`t recognized by the touch screen. I don`t know why but it occurs sporadically, there are some times that the Touch screen works normally these first 2 seconds and there are another times that it does not work.
I made a video of what is happening but I am not allowed to post it here. I uploaded it on youtube under the title of "[Gt-I9082L] Touch Screen first touch lag "
Can anyone help me? Is this problem common?
Thank you
Can anyone help me?
Hello good people
Firstly, i want to say that i searched the forum for this and i couldn't find an answer or a solution to my problem. So here it is:
I have a SGS Plus I9001 which cannot stay ON more than 1 sec. I turn on the phone, all the logos and texts pass, but when the menu shows, after 1-2 seconds the phone turns off completly or restarts itself. I have a long hisoty with my phone however :cyclops: I used a normal 2.3.6 android and then switched to CyanogenMod 10.1. It worked just fine. I was very, very happy with it. One night i left the phone charging and when i woke up in the morning, the phone was dead. Completly DEAD! Services change the whole motherboard and the phone worked just fine for about 1-2 hours and then this happened. I opened it up and saw that the motherboard shows "SGH-T959". I tried installing stock roms, different versions of Cyanogen and Kernels but nothing can turn on the phone and make it work. It just restarts itself. The only thing i ave managed to install via Odin is CWM Recovery.. However, my knowledge of this is limited so here i am seeking for your assistance
PS. I tried changing the power button but no luck.. still the same..
If anyone is interested in this problem, please post an answer or question (if you need more information)..
Thank you!
Deni
hi
this is the first time you use the forum besides that I'm using a translator, so sorry if something is not understood.
this is the problem.
the touchscreen stops working when the screen turns off. when this happens the only way it will work is to remove the battery and on again, if the screen does not turn off the touchscreen working properly all the time.
I think it is problem softwere, but I did all the wipes and still the same.
firmwere want to reinstall but I'm not sure which is the one I need, because it is the first clone with that work.
the model is
mt6572
thank you for your help
Perhaps the problem I have to be a little "weird" to understand, the fact is that it works, but I ask the help of the community, if possible ...
I have a Galaxy S6 Flat (SM-G920I model), and there is a problem with my touch. When I click on the screen, it takes about 3 seconds to respond. But if I disable the "automatic lighting", the touch screen works (you can see on the display image that the button has been pressed), but there is no answer. I made this test an official ROM from Samsung ...
On the other hand, I did the same test patterns above, now a custom ROM (NobleRom_edge + _20151218 deodexed), thanks to XDA for the ROM. After the same process (3 seconds) remain with the problem, but when I disable automatic lighting ..... VOILA !!! Works normally touch, but the "scroll" only works if u move your finger on the touch down very slowly.
Also I made a test call on the device, but the screen is blinking during the course of almost dark call, really weird right? Oh, and after 15 seconds of inactivity, my device does not turn off the screen just stays on.
Finally, given these problems, I do not know whether the problem may in fact be the touch, or the light / proximity sensor, since disabling the option, touch works ...
...regardless of the aid (which I believe is a major challenge), I'm grateful, because I do not want rid of that S6 is an excellent player and I love it !! Sorry for my bad english
Thanks and regards...