Database Info

Does Z3 D6633 support quick charge 2.0 ??

Hi Z3's fans
I have a question which I 've asked in ( Sony forums ) and ( Qualcomm's facebook page )
My question is :
Does Z3 dual model ( D6633 ) support quick charge 2.0 or not !!!?????
Sony support team said that quick charging is just special for Japanese models and they said :
D6633 supports neither Quick Charge 1.0 or Quick Charge 2.0
Qualcomm at first said yes but when I asked about D6633 didn't answer ..
Do you have any idea about this ?
please help ,, I appreciate that so much
:fingers-crossed:

I have the D6603 model and purchased a quick charge charger. It charges my phone from 45% to 89% percent in 45 minutes. It's takes the phone about 1 hour and a half to charge from empty to full.

losttcp said:
I have the D6603 model and purchased a quick charge charger. It charges my phone from 45% to 89% percent in 45 minutes. It's takes the phone about 1 hour and a half to charge from empty to full.
Click to expand...
Click to collapse
is this via the usb port or the magnetic charging port?

I believe its through the USB port.

pptt said:
is this via the usb port or the magnetic charging port?
Click to expand...
Click to collapse
usb port.

First of all, sorry to bring this months old thread back to life, but at least to me, this question is left unanswered even though I looked it up here on XDA.
I have just bought a Xperia Z3 Dual (D6633) and I'm considering getting a Quick Charge 2.0 outlet.
Thus, can anyone please confirm whether the Z3 Dual is compatible with QC 2.0?
Thanks in advance.

.I have a D6633 and a generic charger bought from a phone shop (a good one though)
I never timed the charging but it does charge the phone fairly quickly. I would say i can charge it from 0 to full in a couple of hours.
Does that mean it supports quick charge? I don't know but for me it does it fairly quickly especially I don't leave my phone goes completely flat.
and finally it does that through either ports (usb or magnetic).
k.

Rizera said:
First of all, sorry to bring this months old thread back to life, but at least to me, this question is left unanswered even though I looked it up here on XDA.
I have just bought a Xperia Z3 Dual (D6633) and I'm considering getting a Quick Charge 2.0 outlet.
Thus, can anyone please confirm whether the Z3 Dual is compatible with QC 2.0?
Thanks in advance.
Click to expand...
Click to collapse
I am not sure whether it does fully... Let me explain:
I have a Galaxy Note 4 and the QC2 charger that came with it as well as another brand QC2 charger bought on amazon.com
When I attach the Note 4 to either charger (with a USB voltmeter in between), I get 9V and 1.5 A until 85% charge, then down < 1A for the rest.
D6633 (HK software installed) with both 4.4.4 and the new 5.0.2 firmware, starts with 5V (similar to the Note 4), then ramps up to 9V but cannot get any higher than 0.7 A. The original charger that came with the D6633 says 1.5A on it so theoretically, you get more power from that than the QC2 charger.
I am not sure whether it is a software issue or not and how to enable it.
Just an observation.

Thanks for your input, onurd.
Well, getting more A on the original charger than the QC 2.0 charger is actually odd. Why/how could that be?
Anyways, if not allowing the QC 2.0 charge is a Kernel limiting issue, modifying the original Kernel could make it happen, couldn't it? I know barely nothing about programming, but logically speaking, that does make sense...

I know it is odd but it doesn't look like that the device is "requesting" more amperage from the charger. So using a regular (or the original charger) over the QC2 charger makes more sense (5V x 1.5 A = 7.5 W vs 9V x 0.7 A = 6.3 W)
I do think is it a software issue but I don't know to "enable" it. Does anybody with an unlocked bootloader on CM 12 has a different experience maybe?

Fast charging!??

Ok so I'm looking at the z3 specs page on gsmarena and notice it states on there that the z3 has quick charge 2.0, 60% battery in 30mins!
So, why is my z3 charging at the pace of a slug!??. We are talking more like 10% in 30mins charge!

Don't you need a compatible charger for this feature?
Sent from my Nexus 7 using XDA Free mobile app

You need a Qualcomm Quickcharge 2.0 certified/supportive charger. The Tenergy one on Amazon is cheap and has good reviews. I use my regular charger however.

Oh right, sorry guys, didn't no you need a special charger for it! Would have thought Sony would have provided one

quick charger 2.0

I just bought iVoler quick charger to try it because the price was low and the reviews said it was quality made. I Just received this the other day, and I plugged in my Z4 Tablet and it said Z4 Tablet detected, so it indeed does support the Qualcomm Quick Charging feature! Charging was fast and held strong with my Z4 Tablet. Charging the battery from 0 to 25% in about 19 minutes. And the 6 foot USB cable is of good quality and really nice. It also fits into my Z4 Tablet with a nice click, and fits well around my case. I will definitely buy more of these!
The great product need to be shared.
http://www.amazon.com/dp/B00WSLRCWI

is safe to use ? I'm just wonder why Sony has not advertised this feature

Well, the Z4 is listed as supporting quick charge on Qualcomm's website: https://www.qualcomm.com/products/snapdragon/tablets/sony-xperia-z4-tablet.

I have tried 2 quick charge chargers from amazon so far with the z4 tablet.
No problems and it works with most recent xperias and other snapdragons.

xbill9 said:
I have tried 2 quick charge chargers from amazon so far with the z4 tablet.
No problems and it works with most recent xperias and other snapdragons.
Click to expand...
Click to collapse
What kind of charging times are you seeing with the quick charge 2.0 with a battery that big? i.e. 80% in x mins from empty etc. I have been searching for an answer to this but it doesn't really seem to be posted in times but percents.
Thanks

themana said:
What kind of charging times are you seeing with the quick charge 2.0 with a battery that big? i.e. 80% in x mins from empty etc. I have been searching for an answer to this but it doesn't really seem to be posted in times but percents.
Thanks
Click to expand...
Click to collapse
3% - 80% 1:45 (h:mm)
3% - 100% 2:45
I used an htc qualcomm 2.0 charger.
Sent from my SGP712 using XDA Free mobile app

I use sony uch10 quick charger and it does 0-100% in about 2 and a half hour.

I've just bought a QualComm Quick Charge 2.0 compatible charger and I get the same charge rate of 2.5 hours to 100%. Used to take me up to 6 hours previously.

I am using the Anker Quick Charge 2.0 and it charges the tablet in about 2 1/2 hours. It is on sale right now for $7.99 with promo code QPPAQPP5. The regular price is $15.99. (LINK HERE)

Awesome info, just bought two chargers using that code. Much Thanks!

ramontomzer said:
Awesome info, just bought two chargers using that code. Much Thanks!
Click to expand...
Click to collapse
You are welcome. It is a great charger. I use it with my LG G4 as well.

So, the Sony charger that comes with the Z4T isn't a Qualcomm Quick Chare 2.0 charger, right? A quick check says 1,5A / 5V and that's also what I measured with a USB gadget. I got the same results with my QC 2.0 charger from Samsung...
I'll try it again with another QC 2.0 charger.
/edit: yeah, the shipped charger isn't QC 2.0. Not sure why my Samsung charger didn't work out though, but I'll test my Pisen QC 2.0 charger tomorrow

HI guys I just test it with my Galaxy S7 / Note 5 quick charger with the tablet USB cable and I'm getting full charge in 1hour 15 min.
Sent from my SGP771 using Tapatalk

So why did Sony put in a slow charger?

Help regarding quick charger

So as we know that now our phone supports QC 2.0 on custom ROMs(yay! if you didn't know that)
Now I was searching around for a good charger and I found a good Aukey charger on Amazon IN for about 671 rs(10$)
But upon searching on aliexpress, I found this one. Its really cheap and the reviews are good as well, so any idea about it?
If this is good then I can save a lot of money as its just 4$
http://www.aliexpress.com/item/Orig..._2&btsid=0c205ee3-2c40-4840-840d-78821c709ee1

We already have qc 2.0 as stock charger give upto 1900ampere speed

Rahulraj943472 said:
We already have qc 2.0 as stock charger give upto 1900ampere speed
Click to expand...
Click to collapse
LOL No, that's not quick charger.

Shivam Kuchhal said:
So as we know that now our phone supports QC 2.0 on custom ROMs(yay! if you didn't know that)
Now I was searching around for a good charger and I found a good Aukey charger on Amazon IN for about 671 rs(10$)
But upon searching on aliexpress, I found this one. Its really cheap and the reviews are good as well, so any idea about it?
If this is good then I can save a lot of money as its just 4$ [emoji14]
http://www.aliexpress.com/item/Orig..._2&btsid=0c205ee3-2c40-4840-840d-78821c709ee1
Click to expand...
Click to collapse
Which ROM supports QC 2.0? Sorry i just purchased redmi note 3 32gb.
Sent from my A0001 using Tapatalk

sumchamp said:
Which ROM supports QC 2.0? Sorry i just purchased redmi note 3 32gb.
Sent from my A0001 using Tapatalk
Click to expand...
Click to collapse
As far as I know, all ROMs based on official CM sources like Krexus, DU, Balika's CM, Zephyr-OS etc.

I just ordered Blitzwolf QC 3.0 charger from banggood. I'll check and confirm, once it arrives here. Thanks.
Sent from my Redmi Note 3 using Tapatalk

I ordered AUKEY QuickCharge 2.0 certified by Qualcomm.. It might take a while until I get it but I'll report how it works on a custom ROM.

Shivam Kuchhal said:
So as we know that now our phone supports QC 2.0 on custom ROMs(yay! if you didn't know that)
Now I was searching around for a good charger and I found a good Aukey charger on Amazon IN for about 671 rs(10$)
But upon searching on aliexpress, I found this one. Its really cheap and the reviews are good as well, so any idea about it?
If this is good then I can save a lot of money as its just 4$
http://www.aliexpress.com/item/Orig..._2&btsid=0c205ee3-2c40-4840-840d-78821c709ee1
Click to expand...
Click to collapse
can i know where they or whom state that the RMN3 that using custom ROM support QC 2.0 ? just want to confirm

Guyz know anyone what rom(kernel) can charge with QC2.0 or more on Kenzo?? I ask becouse with stock dosent charge with QC2.0 charger. Thnx a lot.

this kernel

I order aukey qc 2.0 for 9.2$ on aliexpress
---------- Post added at 10:42 PM ---------- Previous post was at 10:41 PM ----------
QC charger charging phone with 9v and 1.6 A, but on controller it changed to 5v and around 3 A

UPDATE: Using RR ROM with Dominator kernel and it really works!
Model: Aukey PA-U28

Can you suggest a best usb Cable for Redmi Note 3 pro ??
My Usb Cable is giving malfunction problem and it is not charging phone ..
I have searched on Amazon & Flipkart but not getting which one is best for our phone .
I have gone to mi services center but usb Cable was out of stock there ..they said it will take 15 days.
Sent from my Redmi Note 3 using XDA-Developers mobile app

Anands3 said:
Can you suggest a best usb Cable for Redmi Note 3 pro ??
My Usb Cable is giving malfunction problem and it is not charging phone ..
I have searched on Amazon & Flipkart but not getting which one is best for our phone .
Click to expand...
Click to collapse
The Redmi Note 3 does not support USB 3.0 so literally any USB cable will do as long as it is safe. It is your decision which one to buy based on the build quality of the cable (as in how quickly it will break).

Souits said:
Guyz know anyone what rom(kernel) can charge with QC2.0 or more on Kenzo?? I ask becouse with stock dosent charge with QC2.0 charger. Thnx a lot.
Click to expand...
Click to collapse
CM 13 official. 9V 1,2A on off phone.

Qualcomm takes extra bucks to enable the quick charge capability. Though SD 650 supports quick-charge but Xiaomi squeezed those extra bucks to cut off the price. Even its same with Moto G3 (osprey). Even if you use quick charger, it would charge in the same speed. (Also showed in Ranjit's video)

Use Mi4i Changer insteed of using any other charger,it will boost your charging speed.

abhay050 said:
Use Mi4i Changer insteed of using any other charger,it will boost your charging speed.
Click to expand...
Click to collapse
Well, not everyone got Mi4i charger :/

I've got a Aukey quick charge 3 and when I used it the phone LED flashed all the time so I stopped using it just in case it's doing any damage to the battery. It does say that it's backwardly compatible with qc1 and qc2 I'm using blaze kernel.

How determine if mine have quickcharge or not on RN3? I have flash Resurrection Remix rom + ElementalX kernel and when I charge my phone from 15% to 100%, it take about 2hours 10minute. Does this count as quickcharge? Before flashing custom rom, in MIUI, when I charge my phone, I get about the same duration. Just wondering....

Quick charger 3.0 for XZ Premium

Hi friends.I have Just pre ordered the XZ Premium.Since it supports quick charge 3.0,could you please suggest me a charger which supports quick charge 3.0?Any help would be appreciated

You mean something like this: https://www.anker.com/products/A2013112 am I right?^^

maharoof said:
Hi friends.I have Just pre ordered the XZ Premium.Since it supports quick charge 3.0,could you please suggest me a charger which supports quick charge 3.0?Any help would be appreciated
Click to expand...
Click to collapse
It comes with quickcharger 3.0 in the UK at least. Where are you based?
Sent from my E6653 using Tapatalk

siedenburg said:
You mean something like this: https://www.anker.com/products/A2013112 am I right?^^
Click to expand...
Click to collapse
Is there any sony made quick charger available?is the charger you have mentioned reliable?

Sensination said:
It comes with quickcharger 3.0 in the UK at least. Where are you based?
Sent from my E6653 using Tapatalk
Click to expand...
Click to collapse
Abu dhabi,UAE.

maharoof said:
Abu dhabi,UAE.
Click to expand...
Click to collapse
In that case I'm not sure if it will come with the quickcharger 3.0. If I were you I'd wait and see and then if it doesn't I would buy Anker charger. They are very reputable company and much cheaper than Sony.
In the UK Sony quickcharger 3.0 cost £40 but Anker only £10. There is absolutely no difference in charging speed or quality.
Sent from my E6653 using Tapatalk

Sensination said:
It comes with quickcharger 3.0 in the UK at least. Where are you based?
Sent from my E6653 using Tapatalk
Click to expand...
Click to collapse
Sensination said:
In that case I'm not sure if it will come with the quickcharger 3.0. If I were you I'd wait and see and then if it doesn't I would buy Anker charger. They are very reputable company and much cheaper than Sony.
In the UK Sony quickcharger 3.0 cost £40 but Anker only £10. There is absolutely no difference in charging speed or quality.
Sent from my E6653 using Tapatalk
Click to expand...
Click to collapse
Thanks for taking your time to help me .are you currently using this anker charger?

maharoof said:
Is there any sony made quick charger available?is the charger you have mentioned reliable?
Click to expand...
Click to collapse
Anker isn't bad, they also sell high quality powerbanks and more, If you are interested in a sony charger you have to pay way more.
I only found it on the german Sony page, but that doesn't mean that they don't sell it elsewhere.
https://www.sonymobile.com/de/products/accessories/quick-charger-uch12w/#specifications
I just looked if we in europe get the quick charger and they don't include one.
As you can see here (also german page) https://www.sonymobile.com/de/products/phones/xperia-xz-premium/specifications/ they listed the uch12w as important accessory, which means it isn't included.

maharoof said:
Hi friends.I have Just pre ordered the XZ Premium.Since it supports quick charge 3.0,could you please suggest me a charger which supports quick charge 3.0?Any help would be appreciated
Click to expand...
Click to collapse
It looks like a quick charger is in the box:
https://forum.xda-developers.com/showpost.php?p=72520323&postcount=121
I have also this one for my S6 Edge and it's ok: https://www.amazon.de/gp/product/B01MU1OJBE/ref=oh_aui_detailpage_o07_s00?ie=UTF8&psc=1

maharoof said:
Thanks for taking your time to help me .are you currently using this anker charger?
Click to expand...
Click to collapse
Yes I'm using it with Xperia Z5 and it works perfectly!
Sent from my E6653 using Tapatalk

Tomorrow I can give you more information for the normal eur version. ... If the delivery service don't f*ck up.

siedenburg said:
Tomorrow I can give you more information for the normal eur version. ... If the delivery service don't f*ck up.
Click to expand...
Click to collapse
Me also, where ya getting yours from?

I ordered it via Vodafone Germany.
It's there and the fast charger is included. It's the UCH12
Product page (in german) https://www.sonymobile.com/de/products/accessories/quick-charger-uch12/
I've included a photo of it (auto settings and low light)

siedenburg said:
I ordered it via Vodafone Germany.
It's there and the fast charger is included. It's the UCH12
Product page (in german) https://www.sonymobile.com/de/products/accessories/quick-charger-uch12/
I've included a photo of it (auto settings and low light)
Click to expand...
Click to collapse
Argl.... Why you've got yours, and I have to wait? I've also ordered from Vodafone Germany and they told me that I get my phone on Wednesday

Mine was listed for Tuesday but they gave it to dhl yesterday, so i got it now

received mine about half hour ago, no pic yet but can confirm quick charge uch12 is included in the box, mine is from Virgin UK.
Quite pleased with the xb20 speaker as well, hell of a lot smaller than my other Bluetooth speaker (Sony btx300, got free with z2) but good volume and clear sound, standard headphones though, no noise cancelling, have to go buy a pair of those on payday

I also want my headphones, but i have to wait up to two months for it

The adapter that comes in the box outputs 2700 mAh or 2.7a. You could just use that, just sayin'

UK version comes with the fast charge
Sent from my G8141 using Tapatalk

Is the QC3 charger compatible with QC2 phone like "old" XZ?