My friend brought to me his son's Tab 10.1 N8000 16GB with an error on screen as soon as you start it stating "Encryption failed. Unable to complete encryption due to interruption. Perform factory reset (erasing all your data) before use. After resetting, try encrypting device again" .... with only a single button below that is "reset device" ... but when you press it nothing happens.
I tired to boot into recovery but won't let me,... I get the logo for android recovery for 2-3 seconds with nothing else on screen then it reboots by itself to the same "encryption failed" screen..
I tried PC Odin to flash CWM, Philz and TWRP but all to no avail.... Failed to write...
I tried PIT file with repartition... failed to write
I tried choosing erase Nand, Clear EFS .. etc but all comes to the same end... failed to write...
Please help.
Bump
got the same issue yesterday, have you managed to fix it?
Thanks
same problem.
any solution?
i got the same error 2 days ago any help on how to fix it?
The original error circa 2015 is probably due to Nand Write Fail .
Probably due to user deleting EFS and wiping nand .
any idea how to fix this guys as i got the same error last week and i am stuck
the same problem...
Related
Hello. So after spending a couple of hours searching for an answer, I couldn't seem to find one that could actually help me. I have a GT-N8013 Samsung Galaxy Note 10.1. I have CWM installed, and a 64GB microSD card mounted using the app2SDscript. I did not make a recovery image.
My problem right now happened all of a sudden. My tablet was low and I had forgotten to charge it, so it turned off, but for some reason it just froze at the logo. So, I plugged it into the charger and restarted the tablet. When loading everything was going well, but before I got to my home screen, my tablet just gets stuck after loading. Then an error appears and says that "Encryption failed. Unable to complete encryption due to interruption. Perform factory data reset." The funny thing is that I haven't even attempted to encrypt my tablet at all. So now I'm completely stuck and really just don't know what to do anymore. I can still get into CWM and download mode. Help please.
What I've attempted:
Wipe date/factory reset through CWM - failed
(while attempting to use CWM, I noticed that CWM couldn't load/open/mount anything)
Wipe cache - failed
Tried flashing stock ROM through odin - failed
6 month old tablet. Help please :crying:
i have the same problem, any ideas?
Hello
I have a P3100 16gb tab... it was working normally and suddenly it went through a boot loop for no good reason... thought it might be an app prob so started to uninstall some when I noticed that after the tab reboots it resets everything and the deleted apps are back again... tried factory reset and nothing.. hard reset and nothing.. flashing using odin.. still nothing...over and over the tab is restored to an earlier state and doesn't respond at all to any changes...
There is an error that shows when I went into recovery mode " did not match sized '/system/csc/common/system/lib/libVideoHub.so ( No Data Available) "
any suggestions?
Thanks in advance
anything?
Same Problem
Same Problem with My Samsung Galaxy Tab 2
Reboot Loop
Data/Factory Resent not deleting any data
Not Flashing With Odin its Giving an error
not flashing with any Custom Rom :crying::crying:
Please some find solution
Thanks in advance :good:
Hy, i tried today to change my android and now i got this error saying
"Encryption unsuccessful
Encrypftion was interrupted and can;t complete. As a result,the data on yout phone is no longer accessible"
I tried more costum roms, what do i need to do to fix it ?
By the way i will try to install the original android and to get back on costums.
I solved this error by changing partition tipe back to EXT4.
Hi all,
My Galaxy tab 2 10.1 is stuck with "Encryption Unsuccessful" message on regular boot :crying:
I already search and read many forum threads but until now I didn't solve the problem.
short summary of the situation:
- years ago, I start to use successfuly CM11 and CMW 6.0.5
- at a time, I add a user account on my corporate messaging (Exchange) which force to encrypt my device. everything was still working properly.
- Few days ago I start to get sometime the message "Encryption Unsuccessful" which lock the regular boot.
Sometime, I still have the complete boot ... but after few minutes reboot of my device.
I already try many things:
- factory reset
- all possible wipe. when I try to whipe the dalvik cache ... reboot of my device
- I try to install ofther recovery CMW recovery-clockwork-touch-6.0.2.7-p5110.img or twrp-2.8.5.0-p5110.tar (through SD card or Odin 3.10.6) but every time I stay with the CMW 6.05 recovery
- I try to flash a stock ROM EON-P5110XXDNB1-20140507164334.zip through Odin but it failed at the system.img flash stage
- I try with another stock ROM BTU-P5110XXDNH2-20140929104701.zip but same result ...
As far as I start to understand from reading some forums ... the issue seems to be arround the internal sdcard partition corrupted
I'm lost
Could anybody help me?
thanks in advance
Vincent
Hello,
still no ideas or suggestion to help me
vdenis06 said:
Hi all,
My Galaxy tab 2 10.1 is stuck with "Encryption Unsuccessful" message on regular boot :crying:
I already search and read many forum threads but until now I didn't solve the problem.
short summary of the situation:
- years ago, I start to use successfuly CM11 and CMW 6.0.5
- at a time, I add a user account on my corporate messaging (Exchange) which force to encrypt my device. everything was still working properly.
- Few days ago I start to get sometime the message "Encryption Unsuccessful" which lock the regular boot.
Sometime, I still have the complete boot ... but after few minutes reboot of my device.
I already try many things:
- factory reset
- all possible wipe. when I try to whipe the dalvik cache ... reboot of my device
- I try to install ofther recovery CMW recovery-clockwork-touch-6.0.2.7-p5110.img or twrp-2.8.5.0-p5110.tar (through SD card or Odin 3.10.6) but every time I stay with the CMW 6.05 recovery
- I try to flash a stock ROM EON-P5110XXDNB1-20140507164334.zip through Odin but it failed at the system.img flash stage
- I try with another stock ROM BTU-P5110XXDNH2-20140929104701.zip but same result ...
As far as I start to understand from reading some forums ... the issue seems to be arround the internal sdcard partition corrupted
I'm lost
Could anybody help me?
thanks in advance
Vincent
Click to expand...
Click to collapse
vdenis06 said:
Hello,
still no ideas or suggestion to help me
Click to expand...
Click to collapse
Sounds like a EMMC Problem.
In some cases it will be enought to update emmc firmware, in some other cases only emmc replacement can fix that issue.
From Datasheet:
5.1.7 End of Life Management
The end of device life time is defined when there is no more available reserved block for bad block management in the device. When the device reaches
to end of its life time, device shall change its state to permanent write protection state. In this case, write operation is not allowed any more but read operation
are still allowed.
But, reliability of the operation can not be guaranteed after end of life
Click to expand...
Click to collapse
I talked to a user from www.android-hilfe.de who sucessfully fixes faulty Tab2, from his own statistic about 80% of effected tab2 can be repaired updating emmc firmware via ISP (in the past i false thought JTAG instead ISP), the other 20% need a new emmc.
The user is from Austria if it is interesting for you.
Best regards
Hi guys, please I need your help. I got a samsung A7 (2018) device which doesn't connect to network though SIMs worked even showing my contacts.
I made research and found out I have root the device since the IMEI has been tampered. I rooted with Magisk, i.e patched my AP with magisk right on my phone then flashed with odin. After rooting I downloaded Super Tool as per instructions cause I read alot of articles and watched alot of videos.
Now that's when I messed up, all I know is, I clicked "Restore original IMEI" while my device was in download mode. And upon reboot I was greeted with an error message telling me something like "update failed, connect to Smart Switch, then click on Emergency Software Recovery".
Tried that, didn't work. I reflashed using Odin several times, with even using PIT and NAND Erase but still nothing. It's just stucked at boot logo and whenever I reboot to stock recovery, this "E:failed to mount /.system" message along with other writings like "#no data on recovery_cause#" show up.
I tried many methods found here on XDA and other sites but still nothing worked. I even installed the PBRP Recovery I saw here on XDA, though that worked but it still didn't fix my problem. And it failed to install zip. 'Cause I tried installing my firmware, said "zip verification failed" and other zip files I don't even understand the message it gave.
I tried wiping cache and formatting, change file system and repair file system, still nothing.
Whenever I try the "Run graphics test" in stock recovery it shows "Installing system update" along with gage, then "Error", then "No command" then "Erasing" along with gage and then back to Recovery.
and whenever i try "wipe cache partition" option
Wipe cache partition->
--Wiping cache...
E:[PDP] lstat /c____/pdp_b__:0 - No PDP Scenario
Formatting cache...
cache wipe complete.
cache wipe complete.
I cut the story short for convenience, but I know you quite understand all procedures I took.
Please help me with anything you have, I would appreciate it.
I tried everything myself cause I want to know how everything works and because I want to study Computer Science. I'm faily familiar with codes.
I'm really sorry if you find my English hard to read or digest, I didn't mean to make it hard for you to understand me.
Thank y'all.