Related
HEllo peeps,here is v1 ALPHA!
Try to install with stock recovery
How to install
1. Use a phone with firmware I9001XXKP4 Rooted
2. deodex the phone according to this:
Instructions deodexing firmware I9001XXKP4 with ROOT access
1. Unpack archive and run xUltimate v2.2 Main.exe
2. If all goes well, xUltimate recognizes the phone and connect to it, then you will see a menu of options
(Your phone must be in debug mode enabled usb and "Emulation location")
3. Run "Option 1". After it's complete - launch "Option 2".
4. Then, run "Option 3"
5. Important! After starting "Option 3" =>
6. Run "Option 4" and wait until it ends.
7. Close xUltimate
8. Copy the folder "done_frame" and "done_app" (from the place where we unpacked the archive xUltimate) in the ROOT, not on the external flash (... mnt / sdcard ...)
9. We place the folder from the archive to the root of sdcard gscript
10. Install? BusyBox_installer_3.6.3 (run and provide the superuser, wait to be installed !!!), then install nl.rogro.GScriptLite
11. Restart the phone (peregruzka / fully charged?)
12. Put the phone in "debug mode on USB" and enabled "Emulation location"
13.Zahodim/Go? in GScript Lite -> Menu -> Add script -> Load file -> Save
14.Dalee click on the script execution Deodex
15.Dalee look like the phone is buggy and throwing out messages on closing different programs until you restart
16.Zagruzilsya? We use the phone with the firmware deodex.
If you're working on the program Main.exe paragraphs 4.3 pops up an error, you must update JAVA on your computer and it will work!
3.ustanovit (appoint, designate, assign) with instructions on odin cwm 4pda
Instructions:
1. One put a 3-AND FILE - Aries + CWR (from the archives!) And BOOT (from the firmware!)
2. stitches as usual ....
3. Phone does not go away after rebooting once in CWR and just loaded ....
4. After downloading, go out in rekaveri menu ... any way (I stopped using the Advanced menu from the header!)
get into the CWR, yes there is double vision, but to understand you can create a full backup is possible! I've done and happy with ... SHOULD finished the script itself to remove the split!
YES ---- control + and - keys, make the choice key.
4.ustanovit (appoint, designate, assign) with Market rom manager, through it to enter into recovery mode
select from the menu to update the cwm sd, select the zip with the firmware.
5.rejoice new firmware and wait for new ones.
if u screw up,just flash stock rom,and u r good to go!
It will work on any i9001 rom,but first try with xxkp4
Features:Also added :
init.d support
fully deodexed
zipaligned
juwe's ramscript
modded apps
removed bloatware
tw4.5 launcher+modded adw launcher
some custom scripts
modded swype and changed tracer colour
better gps and battery
htc sense live wallpaper+clock widget+launcher
DSP manager and some scripts from Cyanogen ModDisclaimer:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Click to expand...
Click to collapse
http://www.4shared.com/file/EY2BtjQi/signed_Cranium_i9001_kang2.html
Hi! I'm very happy!!! Thank you so much!!! We haven't clockwork mod. I'm with 2.3.4 XXKP4 and maybe it's the best rom at the moment. Can you tell me how I can get you the files? It is possible with ghost commander? And can you make this Quadrant hack for i9001? THANK YOU AGAIN!!!
//sorry for my bad english
karo_96 said:
Hi! I'm very happy!!! Thank you so much!!! We haven't clockwork mod. I'm with 2.3.4 XXKP4 and maybe it's the best rom at the moment. Can you tell me how I can get you the files? It is possible with ghost commander? And can you make this Quadrant hack for i9001? THANK YOU AGAIN!!!
//sorry for my bad english
Click to expand...
Click to collapse
Quadrant hack can be used for any android 2.1+ and rooted phone....
first install stock firmware....then root it......then copy the system folder from your phone(by root explorer) and then upload it....(do not install any apps!)
i dont know about ghost commander!
sakindia123 said:
Quadrant hack can be used for any android 2.1+ and rooted phone....
first install stock firmware....then root it......then copy the system folder from your phone(by root explorer) and then upload it....(do not install any apps!)
i dont know about ghost commander!
Click to expand...
Click to collapse
I can't install new firmware at the moment, but if no one doesn't get you the files, I will flashed it tomorrow.
Once again - thank you )))))))))))))))))))
ok............also answer by question in the root/unroot thread
sakindia123 said:
i want to make a custom rom for i9001....but some one would have to upload a stock system folder(i dont have this device) from the best stock rom for it......(then pm me)
i have also made rom for i9003!
also tell me do u have clockwork mod?if not, i will make odin flashable tar
Click to expand...
Click to collapse
can't you just grab .smd file and extract system from it? i mean if i try to romdump, it'll backup all kind of my personal stuff as well...
tell me an alternative way and i can do it by tomorrow
One more question. I'm with XXKP4 with installed only games and simple apps + root. Can't I do a factory reset and give you my android files without re-flashing?
yes.....u could do that....
sakindia123 said:
yes.....u could do that....
Click to expand...
Click to collapse
Okey thank you! Wait 1-2 hours
sakindia123 said:
yes.....u could do that....
Click to expand...
Click to collapse
are you an expert dev who compile from scratch or will you be using kitchen?
but some one would have to upload a stock system folder(i dont have this device) from the best stock rom for it
Click to expand...
Click to collapse
Then best is i9001's stock rom with android 2.3.4 ! I'll pm you the link now.
i m a learning dev....
and expert dev too use kichen for petty purposes like root and deodex!
Hi, I can't copy the files, becouse it writes "Paste in progress" about 1 hour and nothing... Have files copied but..?
i presume u have enough space in ur sd card!
try to leave that coping overninght!!!
also,try to pull via adb,it will be faster
Good to hear there is development on the custom rom-area! Your work is highly appreciated!
http://forum.xda-developers.com/showthread.php?t=850359
this guide by Rotahammer can also be used for i9001 to get rom dumps.............upload only stock dump or i will get ur personal data!
Is it possible to port cm7 to our device?
If we base on HTC Desire S cm7 mod which it have the same GPU and CPU, could we compile it to make it compatible to sgs+?
samyeung97hk said:
Is it possible to port cm7 to our device?
If we base on HTC Desire S cm7 mod which it have the same GPU and CPU, could we compile it to make it compatible to sgs+?
Click to expand...
Click to collapse
I'm not sure if you can call Desire S and Galaxy S+ the same since Desire S has MSM8255 and Galaxy S+ has MSM8255T, maybe those two processors use the same drivers? not sure about that...
Who's doing romdump? i can't at the moment since i have billion of personal stuff which i can't erase from my phone...anyone willing to romdump here?
EDIT: actually let me give it a try, i think i have adb, someone else should also try to do it too...
EDIT2: not working for me, i'm trying to get ADB...in the meantime someone keep trying to get the romdump !
I've find out that Desire S's processor driver is ARMv7 Processor rev 1 rather that our's rev 2.
Edit: My spare phone x8's driver is ARMv6 rev 5, but we have devs that compiled htc hero cm7 mod to our phone and worked flawlessly. But HTC Hero's driver is ARMv6 rev 2, so I think revision different doesn't matter.
Edit2: How about making lagfix?
samyeung97hk said:
I've find out that Desire S's processor driver is ARMv7 Processor rev 1 rather that our's rev 2.
Edit: My spare phone x8's driver is ARMv6 rev 5, but we have devs that compiled htc hero cm7 mod to our phone and worked flawlessly. But HTC Hero's driver is ARMv6 rev 2, so I think revision different doesn't matter.
Edit2: How about making lagfix?
Click to expand...
Click to collapse
well our first priority should be to make a stable rom first by the help of our indian mate and then we can use the kitchen to port a CM7 to our device. I need a stable custom rom first and i can try to port CM7 to ours.. (btw htc flyer uses our CPU)
* First go to:
https://code.google.com/p/rest-client/downloads/list
And download RESTClient Gui (not CLI).
Note : this application requires Java.
* Download the included call1.rcq.txt and rename it to call1.rcq
then open it with RESTClient (File -> open request)
* Go to the Body tab and the firmware_version is what you need to change
(locale can be changed to de_DE or en_US or fr_FR)
* Click on the green button to send a request
* Look inside the Body tab of the HTTP Response section to get the OTA answer.
* The following firmware_version codes are working:
Acer_A700_043.207.06_EMEA_DE
Acer_A700_032.201.02_PA_CUS1
Acer_A700_043.207.06_EMEA_FR
* I haven't found yet the way Acer encodes thoses firmware names byt noticed Acer_A700_043.***.06_EMEA_** are ther most working ones.
* Please share codes if you find more ones !
You can also use this tool : http://forum.xda-developers.com/showthread.php?p=29674556
this is to get newer updates after the root checking updater?
This is the geeky way to check if an OTA update is available when - like me- you lost this ability by using a different recovery for root.
vache said:
You can also use this tool : http://forum.xda-developers.com/showthread.php?p=29674556
Click to expand...
Click to collapse
Can you tell me how to convert Pandora to system,please ?
As you mentioned on the OTA tool topic :
"Acer_AV044_E330_RV08RC02_EMEA_CUS2 become 044.208.05_EMEA_CUS2"
044 is for AV044
But 208 ? 05?
The "2" is a constant (it may change in the future), just add it prior to "08". The "05" is an error, it should be "02" (keep the last number as it is).
And yes 044 is for AV44.
the image name for USA in the OP appears to be older than the update which blocked updates and added Power Option
could be wrong as i don't quite understand the method to their names either... the way they name images
this is the last Acer i will buy, but I'm not going to sell this for another tab just because i don't like how they operate
Sterist said:
the image name for USA in the OP appears to be older than the update which blocked updates and added Power Option
could be wrong as i don't quite understand the method to their names either... the way they name images
this is the last Acer i will buy, but I'm not going to sell this for another tab just because i don't like how they operate
Click to expand...
Click to collapse
I only had this one in my list for this country. Topic will be updated when I have newer working firmware versions.
I have dual sim Lenovo P780.
PROBLEMS:
DEFAULT SIM SLOT (supports WCDMA and GSM) - works fine only on WCDMA /3G. When I put it on "GSM only" it goes dead - "connection error", "emergency calls only" and all that.
SECOND SIM SLOT (which is GSM only) doesn't work att all.
The sim cards are fine (checked it on other phones).
I also put other sim cards in my phone (and swich them around) => same result - sim 1 only 3G, sim 2 dead
Both of them see the providers but have no signal on gsm/2G mode.
Thanks,
Same problem here?
Any workarounds yet?
Cheers
i have the same problem and I cannot find a solution...
Change radio module ( modem).
the same problem here,
badmania98 said:
Change radio module ( modem).
Click to expand...
Click to collapse
I cant find another one, only for S920.
This is my P780 (S920, S820 are compatible) modem collection :
modem P780.zip
http://www51.zippyshare.com/v/55282913/file.html
But:
1. For Chinese model I recomend V51 or V52 ( on the battery is written in chinese). Both sims works but no WCDMA 900 band( chinese version doesnt have this frecvency) . I use V51.
2. For European model V20, V26. (on the battery is not written in chinese). If it used on chinese model will be no signal on Sim2 (x sign)
How to install:
Download and unzip the file modem P780.zip. Chose modem file.
1. Put the modem file (zip) on the SD
2. Use CWM, TWRP or mobileUncle
3. Install modem from recovery
4. Wipe cache
5.Reboot
Let me know if it works.
badmania98 said:
This is my P780 (S920, S820 are compatible) modem collection :
modem P780.zip
Click to expand...
Click to collapse
Great! Thank you.
Your zip is stored on my computer
Nothing helped, I gave all a try.
But now I found out, thats a problem if my local provider and his radio cell.
When I leave my home cell, all is fine.
I installed S920 V17 modem and both slots works for me now on my P780.
Lenovo P780 3G not working in sim1
Hi Badmania,
I also recently bought a lenovo P780. i didnt realise it was a chinese model only after going through your post. i got a little problem with this handset and i hope u can help me out with it. Slot 1 probably supports 2g/3g connection but i am not able to get 3g connection in the slot 1. i tried swiping the same sim card in another handset of different brand and i can use 3G without any problem. slot 2 works fine with 2g.i am a newbie to this android and i dont have any idea about CWM, TWRP or mobileUncle. i would appreciate and be grateful if you could post step by step procedure to change the radio module ( modem) for Lenovo P780 chinese model. i cant read Chinese and its a big problem for me. Looking forward to hear from you soon.
Regards
Stuck Half way
Download and unzip the file modem P780.zip, chose Modem file= SUCCESS
1.Put the modem file(zip) on the SD= SUCCESS
2. Use CWM TWRP or Mobile Uncle= Downloaded mobile Uncle but cant proceed
Steps i took on mobile Uncle:
1. Clicked "Into Recovery Mode" on mobile Uncle> Reboot to Recovery> OK> WARNING!! ROOT REQUEST!! > Please Root your Android First!!...............i cant proceed further from here! PLEASE HELP ME!
Root + TWRP
Root+ TWRP
Read me file inside.
http://www62.zippyshare.com/v/50541818/file.html
Confused
Dear Badmania,
Thank you so much for your help and support though i couldn't execute the solutions you have provided above properly.
Finally i realized why my 3G connection on slot 1 wasn't working after doing a vast research online. I found out that, in order to use 3G in my country(BHUTAN), i must have a smart phone that supports GSM- 850/900/1800 MHz & WCDMA 850/1900/2100 MHz Frequencies. My network service provider told me that i wont be able to use 3G without these Frequencies in BHUTAN.
As per my knowledge, Lenovo P780(chinese model) supports GSM- 900,1800,1900; UMTS-2100 only. I am worried and confused what to do now. From where and how to add GSM- 850 MHz on this handset?????
Will i be able to solve my problem with the solutions you have provided in your previous post??? OR is there a different procedure to overcome this problem. Please help me, i like this smartphone(lenovo P780) so much that i don't want to switch on to another smartphone.
Regards,
Install mobileUncle Tools from GooglePlay.
Open the program.
Under Engineer Mode\Engineer Mode (MTK)\ BandMode\ you will find Sim 1 and Sim2, where you can see what bands are availlable. GSMMode (2G) and WCDMA (3G).
This is it. You can not add other band.
As I know, the chinese model ( mine also)has only WCDMA2100 ( on mobileUncle is WCDMA-IMT-2000). I need WCDMA -GSM 900 but ...it is not possible. It is not a software but hardware issue.
There are 2 versions of P780. One with 4G storage with WCDMA 2100, and one with 8G storage with WCDMA 900&2100 .
Thank you!
Thanks a lot, Now i regret buying this phone to be used in my country!
Please help
i have install root acces on my chinese p780
But i have problem when i try to install v51 modem for my sim card 2 to work in romania.
i have installed twrp manager and granted super user acces.
on my sd card i put the V51+s820.zip file
When i enter TWRP manager / INSTALL / External SDcard / select V51+s820.zip and then when i slide to install the device rebot into Android system recovery 3e and i dont know what to chose... i chose apply update from sdcard and sdcard2 then the android logo of installing apear for 1-3 minute (and i dont see anthing installing) and then the decive reebots.
Please help.. i dont know how o do it..
You already have the answer with what you do wrong, on the romanian forum.
install modem driver to P780
Hello!
I need some help. I've bought a Lenovo P780 phone and when I put in my SIM, I realized there is no signal and the phone can't connect to the network. After some advices I tried to install modem drivers. I downloaded the drivers from badmania98's upload. I copied them to the phone internal memory (tried with SD card too, with no result). I started TWPR manager (tried with mobileuncle too), pressed install, selected one of the unzipped pack, eg. v52 Modem_P780_V52.zip. Slide the slider, my phone reboot, I got the system recovery. I choose apply update from sdcard (or sdcard2 from external SD card) and choose my zip file. My output is:
-- Install /sdcard ...
Installation aborted.
Neither of zips work. What should I try? Did I miss something?
Thanks
Daniel
I need some assistance please.
Hello badmania I am in need of some assistance from you please. I bought my Lenovo P780 and as I've seen and heard, people are having bad signal quality. I was looking online trying to see if there was a way to solve this problem. I ended up on this website and saw your steps on how to do it, but honestly I have no idea what I'm doing. I was wondering if you could sort of guide me through the process please. I would really appreciate it.
Thanks,
Moises
Hey. I have the same kind of problem (chinese Lenovo P780, trying to use it in Hungary with a GSM 900 / 1800 provider) but the weird thing is that the phone loses signal occasionally. I mean if I check the phone, about 7 times of 10 there is no signal. I tried out a lot of modems (found on a russian blog) then I tried out the modems posted in here, but it's still the same. I checked the settings in engineer mode and everything is turned on. Please tell me what is going on.
nandude said:
Hey. I have the same kind of problem (chinese Lenovo P780, trying to use it in Hungary with a GSM 900 / 1800 provider) but the weird thing is that the phone loses signal occasionally. I mean if I check the phone, about 7 times of 10 there is no signal. I tried out a lot of modems (found on a russian blog) then I tried out the modems posted in here, but it's still the same. I checked the settings in engineer mode and everything is turned on. Please tell me what is going on.
Click to expand...
Click to collapse
I have the same problem I'm sending the phone back to the store and asking for a replacement.
I had another P780 2 months back (dropped into water} and there was no such problem.
Hello everybody, I ported my second custom rom for Karbonn A16. It's called Lollifox. It is Android 4.4.2 based custom rom with Lollipop UI. You won't be disappointed.
NOTE: If you share this rom on your blog or website, don't use Direct Link instead please redirect to this post. Because this post contain lot of information and is a way to appreciate the work done to bring this port to Karbonn A16. I wanted to share this port with everyone.
/*
* Your warranty is now void.
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you. Hard. A lot.
*/
Features:
1. Very fast rom
2. Better performance than stock rom
3. Lollipop UI
4. Very light on resources
5. New splash image
6. New boot animation
7. Great ram management
8. Rooted
9. Lollipop features
10. De-Odexed
Lots of other features!
Known issues:
None till now.
If you encounter any bugs, your're welcome to post them here. :highfive:
How to install:
0. Make sure you are on stock rom!!!
1. Copy the rom to external memory card
2. Reboot to recovery
3. Flash the rom
4. Wipe cache, data, dalvik
5. Reboot
PLEASE DON'T MIRROR/ RESHARE/ USE LINK SHORTNER. PLEASE USE ORIGINAL LINK or REDIRECT TO THIS THREAD WHEN YOU SHARE THIS PORT ON YOUR BLOG OR WEBSITE!
If you want Google apps, flash them after flashing rom Download here
SuperSU flashable, flash it if you want after flashing the rom Download here
Screenshots in the attachments
Download
Credits:
* Developer of the rom (I don't know who developed it)
If you liked my work feel free to hit "Thanks" button!
Bugs , errors
I have some problems..
1. Reboots automatically.
2. Sim signal not getting till reboot it.
3 SD does not detects till reboot it.
4. Airplane mod does not work from notification bar.
5. Some places background and text is while color in notification bar it's very hard to read..
If any thing else will post and rom is good thanks to port it for karbonn a16
devrock9 said:
I have some problems..
1. Reboots automatically.
2. Sim signal not getting till reboot it.
3 SD does not detects till reboot it.
4. Airplane mod does not work from notification bar.
5. Some places background and text is while color in notification bar it's very hard to read..
If any thing else will post and rom is good thanks to port it for karbonn a16
Click to expand...
Click to collapse
1-4 : These are not produced on my phone. You should flash your phone with stock rom first, wipe cache, data, dalvik-cache and the flash this rom.
5 : Since this rom is *Ported* and not made by me, I can't help with 5th problem
Btw, thanks for trying out my work!
will try it out
port some more new types for karbonn as I can't lose my data again and again.
In this I can't call from dialer so first need to save contact then call
UOTE=kvsjxd;68855788]1-4 : These are not produced on my phone. You should flash your phone with stock rom first, wipe cache, data, dalvik-cache and the flash this rom.
5 : Since this rom is *Ported* and not made by me, I can't help with 5th problem
Btw, thanks for trying out my work![/QUOTE]
devrock9 said:
port some more new types for karbonn as I can't lose my data again and again.
In this I can't call from dialer so first need to save contact then call
UOTE=kvsjxd;68855788]1-4 : These are not produced on my phone. You should flash your phone with stock rom first, wipe cache, data, dalvik-cache and the flash this rom.
5 : Since this rom is *Ported* and not made by me, I can't help with 5th problem
Btw, thanks for trying out my work!
Click to expand...
Click to collapse
Please use titanium backup to backup your apps
There is no screen security option in security .
what can be done ,need suggestions.
[email protected] said:
There is no screen security option in security .
what can be done ,need suggestions.
Click to expand...
Click to collapse
Since I just ported the existing rom, I can't help with missing features. Alternatively you can install any lock screen app from Google Play Store
@TheMadScientist Please close this thread.
Mod Edit
Thread closed at the request of the [OP]
malybru
Senior Moderator
When I bought Samsung Glaxy Core II, and tried to use an app which required external sdcard, I saw that apps can't write to external sdcard. Also many times when I mess up my device and do not have any rom backup, I flashed my phone with stock rom and faced the same problem. I know this problem can be fixed by using apps available on playstore. But since it seems none more than a hassle to me. I made this task simpler by fixing the permission.xml file manually and making a flashable zip. So, I am sharing it with all users of Samsung Galaxy Core II (SM-G355H). I don't know if it would fix other variants of this phone. So, you can backup your phone using CWM or TWRP first and try it out. If your phone dies, blasts, fire back at you, shoots lasers beams, transforms into terminator or transformer, tries to kill bill or turns into a super sayian, you can restore the phone using that backup. :laugh:
NOTE: USE ONLY WITH STOCK ROM!​
/*
* I assume that your android device warranty may be void by now.
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this flashable zip
* before using it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you. Hard. A lot.
*/
How to use :
0. Make sure you have rom backup.
1. Download the file and move it to extSdCard.
2. Go to recovery (TWRP/ CWM).
3. Flash the zip.
4. Reboot.
Done!
Download
Download via Android File Host
Download via XDA (check the attachment at the bottom of the post)
If you liked my work feel free to hit "Thanks" button!
Nice work!
But pls make it works with custom rom
hahanhata123 said:
Nice work!
But pls make it works with custom rom
Click to expand...
Click to collapse
You won't need this fix with custom rom, as there is no sdcard bug in custom roms. But if you find the bug in custom roms (which are based on stock rom for ex. NOT CM, PAC, FIUI etc.) you can backup your device and use this fix.?
Sent from my SM-G355H using XDA-Developers mobile app
@TheMadScientist Please close this thread.
Mod Edit
Thread closed at the request of the [OP]
malybru
Senior Moderator