[Completed] Please help me 'firmware encountered an issue please connect to kies' - XDA Assist

Hello I started my Friday by deciding I want to upgrade my galaxy s4 to lollipop I downloaded a file used Odin installed job done no problem powered on I have lollipop brilliant! As I am a root user I then found a root file I went into Odin into download mode and started I immediately received a fail I looked on my phone and it was halfway done before freezing I thought stupidly ok I'll plug it out and retry on powering on again I received a message saying firmware upgrade encountered an issue I thought ok that's fine I'll just go into download mode I tried and it stayed on the same screen I then tried recovery mode same problem many forums said to use kies doesn't support my s4 I tried all the kies software and it failed I then tried smart switch and failed I was very worried now and spent hours looking at forums to no avail now here I am hoping that someone will help me thanks guys look forward to a reply

XDA Visitor said:
Hello I started my Friday by deciding I want to upgrade my galaxy s4 to lollipop I downloaded a file used Odin installed job done no problem powered on I have lollipop brilliant! As I am a root user I then found a root file I went into Odin into download mode and started I immediately received a fail I looked on my phone and it was halfway done before freezing I thought stupidly ok I'll plug it out and retry on powering on again I received a message saying firmware upgrade encountered an issue I thought ok that's fine I'll just go into download mode I tried and it stayed on the same screen I then tried recovery mode same problem many forums said to use kies doesn't support my s4 I tried all the kies software and it failed I then tried smart switch and failed I was very worried now and spent hours looking at forums to no avail now here I am hoping that someone will help me thanks guys look forward to a reply
Click to expand...
Click to collapse
I found a similar issue report here: [Q] Need help for S4 GT-I9505 " firmware upgrade encountered an issue" .
Suggested solution there was to boot into recovery, wipe data (= do a factory reset) then flash a new firmware with Odin.
You need to specify your exact device model (GT-I9500 or GT-I9505 or ???).
Then the firmware version your are running ATM.
And the rooting method which failed.
Maybe the rooting method doesn't work for the firmware version.
Here is a rooting guide specially for Lollipop on the S4: [Guide][How to Root Lollipop GT-I9500/i9505][5.0.1].
If you have further questions, please register on xda and ask in the corresponding Q&A thread.

Thread closed. Thank you!

Related

Bricked - Stuck on Samsung Galaxy Note 10.1 Screen

Hi,
I bought a bricked Galaxy Note 10.1 GT-N8000 and managed to flash stock firmware and booted correctly except for a strange Watermark on screen which showed device specs. Then I tried flashing German Kitkat version thru ODIN which failed, now the device is stuck on Galaxy Note 10.1 screen even though I have tried flashing ODIN many times and it has shown PASS but doesn't go beyond that. It can't even go get into recovery (only can get to ODIN mode). Please help me as i can't go beyond that even though i have searched a lot google, no one seems to have gotten any solution.
34 views but no suggestion!!! It seems mighty developers never bought this phone to suggest something. It's strange ODIN can flash and shows success (firmware or any recovery) but nothing seems to install and make it boot. Pl someone got some idea?
usman3206 said:
34 views but no suggestion!!! It seems mighty developers never bought this phone to suggest something. It's strange ODIN can flash and shows success (firmware or any recovery) but nothing seems to install and make it boot. Pl someone got some idea?
Click to expand...
Click to collapse
Have you tried flashing a custom rom?.
Just realised you said it wouldn't go into recovery.
Try flashing from another pc
Which version of ODIN are you using?.
No haven't tried custom ROM but probably this device was never rooted but can give that a try. Yes it won't go into recovery at all. I will give try from another PC. I have tried ODIN v. 1.85 and v3.09.
usman3206 said:
No haven't tried custom ROM but probably this device was never rooted but can give that a try. Yes it won't go into recovery at all. I will give try from another PC. I have tried ODIN v. 1.85 and v3.09.
Click to expand...
Click to collapse
I think it might be a driver issue with your pc if it won't work with v1.85.
Trying reinstalling the Samsung drivers on your pc.
I flashed stock firmware before with the same PC and it worked and I have tried to use same ODIN and same stock firmware which worked before. Even now ODIN says PASS, infact there is no failure at all but device itself is stuck on "Samsung Galaxy Note 10.1" splash screen. I have tried restarting PC, using different USB ports but ODIN always says PASS without problem but device condition is same. I think may be i should change firmware/ stock recovery even though previously the same worked. I am at a loss, don't know what to do?
P.S: Edit: as i was writing these comments I thought of trying out same german kitkat version which earlier broke my device and this time it succeeded and at least device has come out of that splash screen though it is still stuck samsung animation screen. so i will try more and will update. any suggestions are welcome. thanks
ok, now it's possible to get into stock recovery at least, although it shows "E:failed to mount /efs (Invalid argument)" and " Applied the CSC-code : unknown". What to do now? kindly advise
Finally managed to ODIN a stock firmware to work correctly and device is able to boot but show "Broadband: Unknown". Thanks for your help
usman3206 said:
Finally managed to ODIN a stock firmware to work correctly and device is able to boot but show "Broadband: Unknown". Thanks for your help
Click to expand...
Click to collapse
Can you check your IMEI if its available in setting/device? If its not your EFS is missing or corrupt.
yes, IMEI is Unknown! that means EFS is corrupt! I know the IMEI, I have the box, how can i restore it?
usman3206 said:
yes, IMEI is Unknown! that means EFS is corrupt! I know the IMEI, I have the box, how can i restore it?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2111485
Thanks a lot for the link. I will go through it deeply and try it out and will come back.
Just some food for thought! Since i bought this device bricked and never knew which firmware it came with and tried different firmwares randomly until i found one that could work only with "Factory Mode". My question;
1. Could it be that I flashed a wrong firmware causing this thing to go Factory Mode?
2. Or must it be corrupt EFS folder?
I am asking because now i rooted my device, it is showing one EFS folder and when i tried to flash Philz recovery over TWRP it gave me error that " This package is for 'c).p4noterf.n8000.GT-N8000' devices; this is a 'p4notewifi'.
E:Unable to mount '/efs'.
Any suggestions? Please
I think this efs folder is generated automatically by the android when it can't find one because when i checked it was an empty folder, nothing inside. so may the issue is of broken efs system folder. Can't create my own IMEI since i have the box and IMEI is written on it.
Does this device use SIM to make calls or just for data download? Couldn't figure out! Is there a simple way to get rid of the "Factory Mode"? may be i don't need all that SIM functionality after all but certainly want to get rid of that "Factory Mode".
Can I try this one
http://forum.xda-developers.com/showpost.php?p=39523753&postcount=4
Any suggestions, kindly do suggest if i should do whatever is described in the above post or the ones suggested before written below
http://forum.xda-developers.com/showthread.php?t=2111485
Please advise which method should i try. Awaiting eagerly for input
Is it possible to use following tool to repair EFS?
http://forum.xda-developers.com/gal...ol-updated-09-06-14-efs-professional-t1308546
Please suggest me something if someone out there know something?
Finally fixed it by using the thread shown above but i have a fake IMEI but factory mode is no longer there and everything is working normally. Is it possible to change IMEI to my own by using methods i have seen on net including youtube? please advise
usman3206 said:
I flashed stock firmware before with the same PC and it worked and I have tried to use same ODIN and same stock firmware which worked before. Even now ODIN says PASS, infact there is no failure at all but device itself is stuck on "Samsung Galaxy Note 10.1" splash screen. I have tried restarting PC, using different USB ports but ODIN always says PASS without problem but device condition is same. I think may be i should change firmware/ stock recovery even though previously the same worked. I am at a loss, don't know what to do?
P.S: Edit: as i was writing these comments I thought of trying out same german kitkat version which earlier broke my device and this time it succeeded and at least device has come out of that splash screen though it is still stuck samsung animation screen. so i will try more and will update. any suggestions are welcome. thanks
Click to expand...
Click to collapse
Hi there.
The Note is a tablet 10.1 wifi version?
Is that I have exactly the same problem as you and I do not know what to do to get my tablet.
Could you give me the link of the rom with which you solved the problem? Thank you
spider1371 said:
Hi there.
The Note is a tablet 10.1 wifi version?
Is that I have exactly the same problem as you and I do not know what to do to get my tablet.
Could you give me the link of the rom with which you solved the problem? Thank you
Click to expand...
Click to collapse
Mine is wifi+3G version, its called GT-N8000. Mine was bricked before and I flashed it using ODIN (its available everywhere almost) and stock firmware (you need to use the one installed on it from factory, you can find download link from sammobile site but be careful download the one that is specific for you model no.). Then describe your problem may be i can help you.

[Completed] Galaxy S4 Active Help multiple issues

Hello all i am posting this to get some help on a few issues i am having currently. I have a Galaxy S4 active running on straight talk, and i am trying to flash it back to 4.4.2 NE3 so that I can root it. The process i am using to flash it is with Jodin3. I proceed to set jodin up and press start and it just sits there doing nothing. i have tried this all day to no avail. I only run jodin because I only have a mac and my windows laptop has bit the dust and is no longer in operation. The whole thing that started this is that the 5.0 update has come available and the update fails to install after 29%. This did it after the last update but i managed to flash it to the current 4.4.2 NH3. what bothers me is that i flash over a stock non rooted rom and it is no letting me upgrade. So know i am at the point where i just want to be able to be rooted with current firmware, and also figure out why jodin is not working. Any help on this matter would be greatly appreciated
Hi, thank you for using XDA Assist. The best place to ask your question is here,http://forum.xda-developers.com/galaxy-s4-active/help. Also see this,http://forum.xda-developers.com/galaxy-s4-active
Thread closed.

[Completed] Nand write start failure soft bricked unable to flash stock firmware

Hi, so I am on a Galaxy S5 16gb running lollipop 5.0 through sprint. Im not too in this scene but Ive known enough to successfully root and unroot several other phones without.any problems. I successfully rooted my S5 using Cf auto root and everything was perfect until I tried flashing a .zip file for xposed installer through recovery. Ever since my phone wont go.past the samsung logo on start up. I am able to still access download and recovery mode. Every time on odin I try to flash the stock firmware (ive tried three.different ones) it ends up saying " nand write start fail" then "complete write operation failed". This is stressimg me out hardcore and im completely unsure of what I need to do. Much help needed.
XDA Visitor said:
Hi, so I am on a Galaxy S5 16gb running lollipop 5.0 through sprint. Im not too in this scene but Ive known enough to successfully root and unroot several other phones without.any problems. I successfully rooted my S5 using Cf auto root and everything was perfect until I tried flashing a .zip file for xposed installer through recovery. Ever since my phone wont go.past the samsung logo on start up. I am able to still access download and recovery mode. Every time on odin I try to flash the stock firmware (ive tried three.different ones) it ends up saying " nand write start fail" then "complete write operation failed". This is stressimg me out hardcore and im completely unsure of what I need to do. Much help needed.
Click to expand...
Click to collapse
Hi, thanks for using XDA assist!
First, please create an account so you can post in other forums.
Here is your device main forum:
http://forum.xda-developers.com/galaxy-s5
Here is where you should post your question:
http://forum.xda-developers.com/showthread.php?t=2700073
The experts for your device are located there and will be able to help you.
Good luck!

[Completed] Galaxy S6 AT&T Custom Binary Blocked by Reactivation lock!!

GUYS!!! SOMEONE HELP ME PLEASE!!!! Okay i have a Galaxy S6 version 5.0.2 running AT&T G920AUC1AOE2. i had it rooted with ping pong root and everything was working alright. so i noticed i didnt have a custom recovery and i needed one to install other root items. I decided to try TWRP and followed the instructions from Techno buzz... just google s6 custom recovery and its the first one! and everything seemed to go fine until i tried to rebooted to get into my TWRP. and when i did all i got was a reboot and the normal start up screen that says Custom Binary Blocked by Reactivation Lock on the top left hand corner in red letters!! it doesnt go past here!!! ive had some experience with rooting and things like that but this time i dont know!!! i tried downloading the Stock Rom from an XDA forum but it was the OCE version... not the one im on which is OE2. so when i tried to install it would get stuck on NAND WRITE START!!! on odin!! i also didnt have USB Debugging on but i dont think thats the problem. the drivers are properly installed...i found a stock rom that is OE2 and i will try with that..PLEASE if anyone can help me i would really love your help!!! also please try to contact me at [email protected] PLEASE THIS IS MY LAST HOPE!!!!
Update
Okay so odin isnt gonna work.. so i found out i had a galaxy s2 lying around that wasnt running smoothly and i was trying to use odin to maybe flash a stock onto it. but i remember i had kies. so i went there and went to the firmware install. asked for the model number and it worked, asked for the serial number and it worked, then it downloaded and everything worked. so then with my s6 it isnt supported so i tried smart switch. i went to firmware install. model number was good, but when i type the serial number the whole program closes and i cant do anything. i would try to use odin to mess my phone up and try A emergency recovery but i cant even write with odin. im getting close so any ideas??
Hi there,
You'd be best served asking for help from the experts who own your device here:
AT&T Galaxy S6 Q&A, Help & Troubleshooting
Good luck

[Completed] Bootloop on SM G900T1 using CF auto

Hi,
I have rooted a few devices, however this is the first time I have encountered a bootloop error.
Specifically I used Odin and ran CF Auto Root (kltemetropcs smg900t1) from Chainfires DL site
chainfire 405 CF-Root
Device is a Galaxy S5 G900T1 (metro pcs) running Lollipop.
Oden successfully completed all threads. Didn't show any errors, however the phone never finished its boot cycle,
it stops at the carrier logo screen.
I noticed that odin deletes any previous files so I tried a second time using the same CFroot, still the same outcome.
I was thinking of doing a factory reset after reading some other forums, or reinstalling factory ROMs though this is getting to the limit on my knowledge.
I'm unsure of what I should try next, or even where to ask.
Anyone able to help or know where I can ask?
8thvision said:
Hi,
I have rooted a few devices, however this is the first time I have encountered a bootloop error.
Specifically I used Odin and ran CF Auto Root (kltemetropcs smg900t1) from Chainfires DL site
chainfire 405 CF-Root
Device is a Galaxy S5 G900T1 (metro pcs) running Lollipop.
Oden successfully completed all threads. Didn't show any errors, however the phone never finished its boot cycle.
I noticed that odin deletes any previous files so I tried a second time using the same CFroot, still the same outcome.
I was thinking of doing a factory reset after reading some other forums, or reinstalling factory ROMs though this is getting to the limit on my knowledge.
I'm unsure of what I should try next, or even where to ask.
Anyone able to help or know where I can ask?
Click to expand...
Click to collapse
Hi 8thvision
Thanks for using XDA Assist and I can assure you that you came to the right place :good:
As you, I'm a happy owner of a S5 and will try to guide you through this. Please excuse me but, as you didn't commented the what you already reviewed, I may be repetitive here.
The first resource you should access is Chainfire's main thread regarding the S5 (link below). All experienced user reports are in there and they may be helpful for your problem.
[SM-G900*] CF-Auto-Root
In the case your doubts remain, I would ask you to access our experts at the below forum that should be able to tackle your problem:
Galaxy S 5 Q&A, Help & Troubleshooting
Nice regards and good luck.
.

Categories

Resources