Related
Hi all,
With Verizon releasing officially, the update making its SGS3 Global ready atleast for voice as of now, a lot of discussion is happening right now about the Global capabilities.
FYI. I'm a good reader and explorer on hofo,androidforums and xda. So any guidance is highly appreciated
So here is my question.
I have a Verizon S GS3. It is brand new.
1. Can I use it with Straight Talk T-Mobile SIM ( T-Mobile has good coverage near my house ) after doing the rooting, unlocking, etc. etc all the technical stuff
2. If I unlock the phone, will it be truly global capable, I mean, can I use my S GS3 on any GSM Network in the World, even in the USA, with 3G Speeds? Did anyone use it in any Country with 4G LTE Speeds?
3. I know this is really a very very strange question. But after unlocking the S GS3, will it be working on the AT&T LTE Netowrk in the USA? My thinking is, if it working in the LTE Network in the USA, then it will work in other countries as well, where LTE Network is going to be available in the future. Sorry, I know this is a bit weird.
If You can please refer and threads or links, it is fine with me. I'm also looking and not depending only on the answers that I get from this thread. But looking for replies/guidance/links though.
Thank You.
hope this is the answers you are looking for
qzmpal said:
Hi all,
With Verizon releasing officially, the update making its SGS3 Global ready atleast for voice as of now, a lot of discussion is happening right now about the Global capabilities.
FYI. I'm a good reader and explorer on hofo,androidforums and xda. So any guidance is highly appreciated
So here is my question.
I have a Verizon S GS3. It is brand new.
1. Can I use it with Straight Talk T-Mobile SIM ( T-Mobile has good coverage near my house ) after doing the rooting, unlocking, etc. etc all the technical stuff
2. If I unlock the phone, will it be truly global capable, I mean, can I use my S GS3 on any GSM Network in the World, even in the USA, with 3G Speeds? Did anyone use it in any Country with 4G LTE Speeds?
3. I know this is really a very very strange question. But after unlocking the S GS3, will it be working on the AT&T LTE Netowrk in the USA? My thinking is, if it working in the LTE Network in the USA, then it will work in other countries as well, where LTE Network is going to be available in the future. Sorry, I know this is a bit weird.
If You can please refer and threads or links, it is fine with me. I'm also looking and not depending only on the answers that I get from this thread. But looking for replies/guidance/links though.
Thank You.
Click to expand...
Click to collapse
for Q1:yes you well be able to use any network... install any mod now most of them are already rooted and unlocked
for Q2:yes you can... all you need to ddo is to download a program called hiapn.. wipe the existing apn settings.. then auto detect and you are good to go 3g and hspa
Q3: yes it works thanks to the magic of hiapn software... but not many countrys use LTE .. usa canada japan and maybe few others
Verizon SGS3 on any GSM Carrier
Hi experts,
I have a small doubt here.
If the Verizon SGS3 can be used with any GSM Carrier around the world, then that means, the Verizon SGS3 can be used with AT&T or T-Mobile as well along with Verizon Network.
But the T-Mobile or AT&T Versions cannot be used on the Verizon's Network. Is that true?
I'm have got a traveling assignment coming up to Europe this Summer and I need to know what is the best possible solution out there before I leave.
Thank You.
Verizon's GS3 uses CDMA technology for the phone calling and data, as far as I know the SIM in the verizon version is only used for LTE.
From what I have read in forum posts, (this one in particular http://forum.xda-developers.com/showthread.php?t=2013647) if you pop in a SIM card, calling and texting should work. If you want data to work then you need to change some APNs around. Stock touchwiz does not allow this so you would need an app to do that. AOSP ROMs should have a way for you to edit APNs.
On the topic of getting 4G on any other network besides Verizon, that is fairly unlikely as they all use different technologies/ bands. Verizon has LTE, T-Mobile has HSPA+, not entirely sure what AT&T has but I think its also LTE.
This phone will take any SIM card cut to micro-size.
3G+ speeds depends on the frequency the carrier uses. The VZW GS3 uses the following radio frequencies after the JB update: GPRS/EDGE/GSM (850/900/1800/1900); HSPA/UMTS (2100) [I had to search high and low to find this for my trip to China]
Each LTE carrier uses different radio frequencies, and global countries also use LTE frequencies different than the US ones. 4G is a very varied standard at the moment.
If you want fast internet on a non VZW carrier, it better have HSPA+, otherwise you are on 3G at best.
Right now, the only truely global phone is the iPhone5 on VZW, which supports 5 different LTE frequencies. Sad but true.
The US based SG3's dont even have the FM radio that the international versions have
Edge
Mix3d said:
This phone will take any SIM card cut to micro-size.
3G+ speeds depends on the frequency the carrier uses. The VZW GS3 uses the following radio frequencies after the JB update: GPRS/EDGE/GSM (850/900/1800/1900); HSPA/UMTS (2100) [I had to search high and low to find this for my trip to China]
Each LTE carrier uses different radio frequencies, and global countries also use LTE frequencies different than the US ones. 4G is a very varied standard at the moment.
If you want fast internet on a non VZW carrier, it better have HSPA+, otherwise you are on 3G at best.
Right now, the only truely global phone is the iPhone5 on VZW, which supports 5 different LTE frequencies. Sad but true.
The US based SG3's dont even have the FM radio that the international versions have
Click to expand...
Click to collapse
Yeah, my girlfriend has a verizon s3 and with straight talk she is only on edge it never changes. It makes the phone nearly useless. Ive tried to talk her into letting me flash and unlock it but she isnt real interested in it. I dont even know forsure if unlocking the bootloader downgrading to 4.1.1 and using the att sim unlock method would work but I would assume that flashing it would allow you to at least get 3-4g. not?
Dear All,
I recently got this device in Hong Kong and is hapi with its performance!
But I am still wondering if this device could actually use the LTE available in HK?
I knw the msm8960 claimed to be capable of utilizing all frequency of radio,
so is it possible that there is some soft lock in the baseband?
Could i flash the baseband or replace the modem driver from other device to access other frequency?
any idea is appreciated!
Thanks!
Vasco
I think it has to modifiy the ROm and the hardware
I tried to figure out, if our Photon Q is supporting more LTE bands than 1900 MHz (#2 or/and #25).
-> http://en.wikipedia.org/wiki/E-UTRA#Frequency_bands_and_channel_bandwidths
On some sites there are reports for having another band. (Have to search again, I think it was 850 MHz, #26 or 700 MHz, #12/#17/#29.)
I have also searched for supported frequencies for MSM8960.
I found some BlackBerry devices based on that SoC and 2 different versions of supported LTE bands.
One version (UK) supported 4 in europe used bands und the other version (US) supported 4 in US/Canada used bands.
I think that the Photon Q is like the BlackBerry US version and supports 4 LTE bands in US/Canada.
If you need a few sites, I will search again and show it to you.
The strange thing is, if I set to LTE only (via 4636) I can see all 4 carrier (germany).
We have 3 bands with LTE on it, but I can only get signal to max 2 of them.
Band 3, 7 and 20 (1800, 2600, 800 MHz).
The weird thing is, that on band #20 (800 MHz) only 3 carrier are active, so it has to be band #3 or #7.
Maybe I'm missinterpreting things and thats just a sideeffect of crossing bands of LTE US and UMTS Germany.
On stock ROM there was another "secret phone code" to see what the phone-part is doing. (From qualcomm I believe.)
I think I will test it some other day, to see which band is active.
At last, I was never been able to "login" or "register" into my carriers network within LTE.
Please discuss about that possibility, I really want to find out, which frequencies are supported by our phone on LTE.
Loader009 said:
I tried to figure out, if our Photon Q is supporting more LTE bands than 1900 MHz (#2 or/and #25).
-> http://en.wikipedia.org/wiki/E-UTRA#Frequency_bands_and_channel_bandwidths
On some sites there are reports for having another band. (Have to search again, I think it was 850 MHz, #26 or 700 MHz, #12/#17/#29.)
I have also searched for supported frequencies for MSM8960.
I found some BlackBerry devices based on that SoC and 2 different versions of supported LTE bands.
One version (UK) supported 4 in europe used bands und the other version (US) supported 4 in US/Canada used bands.
I think that the Photon Q is like the BlackBerry US version and supports 4 LTE bands in US/Canada.
If you need a few sites, I will search again and show it to you.
The strange thing is, if I set to LTE only (via 4636) I can see all 4 carrier (germany).
We have 3 bands with LTE on it, but I can only get signal to max 2 of them.
Band 3, 7 and 20 (1800, 2600, 800 MHz).
The weird thing is, that on band #20 (800 MHz) only 3 carrier are active, so it has to be band #3 or #7.
Maybe I'm missinterpreting things and thats just a sideeffect of crossing bands of LTE US and UMTS Germany.
On stock ROM there was another "secret phone code" to see what the phone-part is doing. (From qualcomm I believe.)
I think I will test it some other day, to see which band is active.
At last, I was never been able to "login" or "register" into my carriers network within LTE.
Please discuss about that possibility, I really want to find out, which frequencies are supported by our phone on LTE.
Click to expand...
Click to collapse
Dear Loader009,
Thanks for your information! I'm really impressed that you could actually search the carrier in 'LTE only from Germany!
Could you please share the version of ROM you are using?
And if possible, any screenshot? I really want it can be used in HK with LTE(1800, 2100 & 2600Mhz)
Also do you have more information about the secret phone code? I think it would be interesting
Actually, I noted that xt925 and xt905 are using the same chip MSM8960 with LTE usable in HK.
Is there anyone can locate the radio/baseband of their rom and port it for XT897?
I am willing to try it with my machine.
If this work, I think we could use this photon q all over the world!
Any idea?
Regards,
Vasco
disablewong said:
Dear Loader009,
Thanks for your information! I'm really impressed that you could actually search the carrier in 'LTE only from Germany!
Could you please share the version of ROM you are using?
And if possible, any screenshot? I really want it can be used in HK with LTE(1800, 2100 & 2600Mhz)
Also do you have more information about the secret phone code? I think it would be interesting
Actually, I noted that xt925 and xt905 are using the same chip MSM8960 with LTE usable in HK.
Is there anyone can locate the radio/baseband of their rom and port it for XT897?
I am willing to try it with my machine.
If this work, I think we could use this photon q all over the world!
Any idea?
Regards,
Vasco
Click to expand...
Click to collapse
Of course, I was just blind guessing the hardware for xt926 and xt907 are using the same hardware.
If not, there should be one chip controlling the modem channel of the device to be replaced.
But WHICH ONE???
Any expert in this area can solve this question? I am a dummy for radio stuffs
This seems like it's getting pretty interesting.
Sent from my XT897 using Tapatalk 2
Dear all,
I'm also very interested in this topic since I imported a Photon Q to Germany and was wondering if it's possible to use the local LTE 800/1800/2600 bands.
I think the first thing we have to find out is whether the hardware is capable of using other bands than the 1900 band listed on the Motorola website. As Loader009 states he could see LTE carriers which are known to use different bands I assume the hardware can do it. Otherwise the carriers wouldn't have been listed, right? Maybe someone from another country with different frequency bands can check and confirm that he can see those carriers as well?
Thus, the limitation to the 1900 band should be software-made and could be modified by a developer. I hope someone can participate at that point as I don't know much about coding...
I'm using CM10.1.
I can't remember the secret phone code, I have to do research again.
This secret phone code only works on Stock ROM. (I stupidly deleted it, when it wasn't working on CM10 anymore.)
The one secret phone code I used to force "LTE only" was *#*#4636#*#*.
Please DON'T change the baseband (don't even tap on it).
This can do problems to you. (I had to use QPST to recover the supported frequencies.)
Also, developers (afaik) can't modify the modem firmware.
We also don't even know, which LTE bands the Photon Q is capable of. (Except 1900 MHz)
I've got my 32GB SDCard back and will test it in the next few days out.
I hope I'll find that secret phone code, I'll also make a few screenshots.
Got the code!
##33284# <- ##DEBUG#
It only works on stock afair!
I'll test tomorrow, it's about 3am now >.<
disablewong said:
Dear All,
I recently got this device in Hong Kong and is hapi with its performance!
But I am still wondering if this device could actually use the LTE available in HK?
I knw the msm8960 claimed to be capable of utilizing all frequency of radio,
so is it possible that there is some soft lock in the baseband?
Could i flash the baseband or replace the modem driver from other device to access other frequency?
any idea is appreciated!
Thanks!
Vasco
Click to expand...
Click to collapse
I have read the "QU_SnapdragonS4_White_Paper_FNL_Rev6.pdf" and found there following entry:
-----------------------------------------------------------
• Industry’s first fully integrated 3G/4G world/multimode LTE Modem: <<<Supports all of the world’s leading 2G, 3G and 4G LTE standards>>>.
It also includes integrated support for multiple satellite position networks (GPS and GLONASS) as well as short range radios via Bluetooth,
WiFi, FM and NFC.
• Designed for speed, compatibility and power savings:
Snapdragon S4 Processor MSM8960 chipset includes the industry’s only complete platform that integrates all of the world’s leading 2G, 3G and 4G mobile broadband modem technologies on a single chip. This new integrated multimode modem is based on an advanced, programmable architecture that is performance, size and power optimized for the fastest combination of modems available for:
- LTE FDD/TDD (Cat3)
- 3G (DC-HSPA+ Cat 24)
- EV-DO Rev. B
- 1x Advanced
- TD-SCDMA
- GSM/GPRS/EDGE NFC.
Multimode/Multiband Means Worldwide Coverage.
• Support for multiple radio frequencies: Mobile broadband technologies are growing increasingly complex in their implementation. LTE is currently being implemented in over 40 diff erent radio frequency bands throughout the world. To complement its wide range of modem standards supported, Qualcomm has designed the Snapdragon S4 Processor MSM8960 CHIPSET platform to <<< address all commonly-used frequencies (from 700–2600 MHz) and bandwidths up to 20 MHz>>>, allowing its customers to address any mobile network opportunity whether the simplest single frequency implementation to the most extensive multi-frequency global mode, whether 4G, 3G or 2G.
-----------------------------------------------------------
Based on the document the chip can handle all LTE Standards, but it depends on his "advanced, programmable architecture"....as written there and how Motorola / Sprint implemented this, maybe they reduced LTE only to one Standard.
I don't have LTE in my area and so I cannot test this.
That's possibly right.
Something else:
If I remember correctly, somewhere in this forum have been said that for CDMA the internal Sprint "ID"(?) is used.
Maybe that's also the reason why I cannot connect to LTE in my area.
The phone is trying to "login" with the Sprint ID and this of course won't work.
The ##DEBUG# menu wasn't helpfull. It shows frequencies for american standards and not for GSM/WCDMA.
Also the LTE menu is also not very helpfull, it doesn't show frequencies at all.
Any News on this topic?
Maybe one of the developers can give a statement?
Yesterday I tested a LTE compatible SIM card.
My Bro has a Samsung Galaxy S4 with 4G/LTE in my area.
So I've put his SIM-Card into my Photon Q and set LTE only.
I had no luck, the Phone couldn't register into the network for this SIM.
I guess either it has the wrong frequencies or LTE is for inbuilt "SIM" (Sprint SIM?) only.
The latter. LTE is configured only for 1900 MHz which Sprint uses.
LTE is configured only for Sprint's frequencies, however, it supports the United States frequencies of PCS blocks A-G. The G Block is Sprint's current LTE channel, and they may deploy it later on Blocks A through F, depending on if they own the spectrum in a given market. The reason you see EU networks when the phone is in LTE Only Mode is most likely because the Phone still sees GSM signals, but will only connect to LTE ones from those GSM signals. Likewise, in the US, if you force LTE Only and then search for networks, AT&T and T-Mobile US will come up as the GSM carriers the Photon Q sees, rather than the LTE signals it sees.
Setting the Photon to LTE Only will not do anything for LTE in the EU. I suspect that if another carrier in the EU uses the 1900 MHz for LTE, the Photon Q will have no issues connecting to LTE in Europe. But until that time, be happy with HSPA.
Skrilax_CZ said:
LTE is configured only for 1900 MHz which Sprint uses.
Click to expand...
Click to collapse
Can this configuration theoretically be changed / other frequencies be added?
Only if you break BP security.
Skrilax_CZ said:
Only if you break BP security.
Click to expand...
Click to collapse
Sorry, what's that?
IIRC The only place with 850mhz LTE available is the Chicago market and currently no phones at all support it. :crying:
Not only does your phone need to support it, your PRL and cell-site does too...
I want to figure this out once and for all.
What services does this phone support on the 850 MHz band?
The big question is whether UMTS/HSPA works. NYC area has amazing 850 band coverage on AT&T.
If I were to put a prepaid AT&T SIM in my phone, set my phone to only operate on the 850 MHz band, and set the proper APNs (necessary for 3G?); would I be able to get data beyond EDGE?
Only one way to find out...
There's no mystery to it if you read through the [GUIDE] Set up Verizon Galaxy S3 as World GSM Phone (confirmed working) thread and the [BOUNTY] ($205 so far) Enable HSPA+ on 1900 MHz / 1700MHz for VZW Galaxy S3 i535 threads completely....
With the radio software verizon has on the phone, the galaxy s3 is quad band GSM (850/900/1800/1900) and single band WCDMA (2100).
We don't know if it has the hardware for WCDMA 850/900/1900 and until now, nobody has successfully flashed a different radio due to the bootloader lock. Keep an eye on the "enable WCDMA 1700/1900" thread for updates.
And just to answer another question that you might have, when my S3 was rooted and set up to work in Germany, I tried both T-Mobile and AT&T sim cards here in town. The problem with the S3 is that even if you try to select a different WCDMA band in the field test menu, the radio firmware will not allow you to change it from 2100. So in an area with T-Mobile PCS (1900) and AT&T PCS/CELLULAR (1900/850) WCDMA, each test I tried only ran on EDGE.
Sent from my Nexus 4 using xda premium
Wow... That really sucks.
So, there's literally no way to get 3G outside of Verizon aside from MetroPCS EVDO?
LLStarks said:
Wow... That really sucks.
So, there's literally no way to get 3G outside of Verizon aside from MetroPCS EVDO?
Click to expand...
Click to collapse
The first step is to experiment with different radio files, as one user in the 1700/1900 thread wants to do, but we need to get the secure-boot/bootloader unlocked so those files can be written.
Phones like the Rezound had the hardware for Quad-band WCDMA (3g), but took a radio file flash to make it work. The reason there is a bounty is because we -think- the Verizon S3 has the hardware, it will just take some work to get the software on the phone to talk to that hardware.
I know. I've been following the thread.
Was a little unsure of the details regarding frequencies.
As far as I understand, they're at a dead end. They need JTAG/UART to continue without worrying about bricks.
LLStarks said:
I know. I've been following the thread.
Was a little unsure of the details regarding frequencies.
As far as I understand, they're at a dead end. They need JTAG/UART to continue without worrying about bricks.
Click to expand...
Click to collapse
Yeah, and sadly, I lack the skills and the bounty probably isn't enough to attract a dev with JTAG and a phone to fiddle with to solve our issue
Verizon cdma is ran by nortel dual urban base stations the frequencies are 810-910 and 1840-2000mhz. The LTE is 690-760mhz 1x means that your on 850. 3g means your on 1900 or 850 depending on how far away from the site you are, and 4g means your on LTE. The LTE base station is ericsson but speeds will vary depending on whether or not the site is on fiber or T1 transport. Normally they keep the pre pay customers on the nortel dual urban... Oh by the way we are starting to decommission the lucent cdma on metro pcs sites and convert them to t-mobile GSM but luckily metro uses ericsson for LTE too so there's hope.
Sent from my SCH-I535 using xda app-developers app
LOL I'm an idiot, was thinking HTC ONE when I said one hd...
Found a really good deal ($170) on a bnib razr hd from verizon with a bad esn on ebay. Didnt really have the time to fully research it before the auction ended so I just took the chance and placed the order.
Did some searching after the fact and have found some really conflicting information. I know the phone would be pretty much useless in the states, but I'm unsure of its usability in Canada? I've herd they would work fine in asia and india so I'm basically curious if anyone knows the extent of how far verizon shares its blocked phone information? Does it extend to Canada?
I've herd on the states you need to have your phone activated onto a network? In Canada we just throw in our sim card and are good to go. Is this a different technology (CDMA vs GSM?). If so assuming the Activation portion of the phone is blocked could the sim card part of it still be open theoretically?
Assuming its possible to work with the bad esn does anyone know if I could use LTE on Bell/virgin?
According to bell it uses LTE AWS 1700mhz and LTE 700mhz and HSPA 850mhz and 1900mhz
According to gsm arena the xt926 uses:
HSDPA 850 / 900 / 1900 / 2100
4G Network LTE 700 MHz Class 13
Should be fully compatible no? I cant find any information on what class bell uses for their LTE, nor do I know if the class affects anything?
mikeinaus said:
LOL I'm an idiot, was thinking HTC ONE when I said one hd...
Found a really good deal ($170) on a bnib razr hd from verizon with a bad esn on ebay. Didnt really have the time to fully research it before the auction ended so I just took the chance and placed the order.
Did some searching after the fact and have found some really conflicting information. I know the phone would be pretty much useless in the states, but I'm unsure of its usability in Canada? I've herd they would work fine in asia and india so I'm basically curious if anyone knows the extent of how far verizon shares its blocked phone information? Does it extend to Canada?
I've herd on the states you need to have your phone activated onto a network? In Canada we just throw in our sim card and are good to go. Is this a different technology (CDMA vs GSM?). If so assuming the Activation portion of the phone is blocked could the sim card part of it still be open theoretically?
Assuming its possible to work with the bad esn does anyone know if I could use LTE on Bell/virgin?
According to bell it uses LTE AWS 1700mhz and LTE 700mhz and HSPA 850mhz and 1900mhz
According to gsm arena the xt926 uses:
HSDPA 850 / 900 / 1900 / 2100
4G Network LTE 700 MHz Class 13
Should be fully compatible no? I cant find any information on what class bell uses for their LTE, nor do I know if the class affects anything?
Click to expand...
Click to collapse
You can unlock it for gsm carriers in the us and its already unlocked for international use. I know with att u get h+ witch is good enough for me on straight talk. I average about 6mps.
Got the phone on the weekend. It works fine on bell/ virgin except I can't connect to lte. Does anyone know of it's possible to unlock lte? According to gsm area the phone should be compatible with lte 700mhz which is what bell uses... Will that radio com thing you guys use to unlock it for us carriers help?
[Q] Can an unlocked Pantech Discover (AT&T brand) use 4G lte data on another service?
Can an unlocked Pantech Discover (AT&T brand) use 4G lte data on another service? I know it has the correct network ability (LTE 700 MHz Class 17 / 850 / 1700 / 1900 / 2100) to work at 4G lte speeds on AT&T network, but I want to know if it will work while unlocked on T Mobile (that has the same requirements). The network abilities are confirmed compatible, and is not the question, will it reach the same speed even though it is not made for the carrier (T mobile in this case). I would love to find out before I spend the money to buy it brand new and unlocked, only to see if it will work or not. And if not, I have wasted the money. I have heard that this will not work, or might now that things have changed (No real help, and makes my more cautious).
Reading everything on the internet I can find. So far I've found the conflicting answers that:
1) As long as it has the network ability, then yes.
2) No unlocked phone will reach above EDGE speeds on another carrier. (May by very outdated, but can't confirm)
3) That might not be correct, unlocked phones will not, normally, work correctly on other networks.
4) It works 100%
5) It can only reach 3G
After several calls I've found out:
1) T mobile says:
a) Should work.
b) No idea.
c) Since it has the network ability to use 4G lte with our network, it should, but I don't know.
2) Pantech
a) Just try it.
b) I think so, but I don't know.
3) AT&T (the phone is made for and sold by them)
a) Unlocking will not limit the phone.
Is "No unlocked phone will reach above EDGE speeds on another carrier" just a myth now since "Things has changed" (what ever that means)?
digi2600 said:
Can an unlocked Pantech Discover (AT&T brand) use 4G lte data on another service? I know it has the correct network ability (LTE 700 MHz Class 17 / 850 / 1700 / 1900 / 2100) to work at 4G lte speeds on AT&T network, but I want to know if it will work while unlocked on T Mobile (that has the same requirements). The network abilities are confirmed compatible, and is not the question, will it reach the same speed even though it is not made for the carrier (T mobile in this case). I would love to find out before I spend the money to buy it brand new and unlocked, only to see if it will work or not. And if not, I have wasted the money. I have heard that this will not work, or might now that things have changed (No real help, and makes my more cautious).
Reading everything on the internet I can find. So far I've found the conflicting answers that:
1) As long as it has the network ability, then yes.
2) No unlocked phone will reach above EDGE speeds on another carrier. (May by very outdated, but can't confirm)
3) That might not be correct, unlocked phones will not, normally, work correctly on other networks.
4) It works 100%
5) It can only reach 3G
After several calls I've found out:
1) T mobile says:
a) Should work.
b) No idea.
c) Since it has the network ability to use 4G lte with our network, it should, but I don't know.
2) Pantech
a) Just try it.
b) I think so, but I don't know.
3) AT&T (the phone is made for and sold by them)
a) Unlocking will not limit the phone.
Is "No unlocked phone will reach above EDGE speeds on another carrier" just a myth now since "Things has changed" (what ever that means)?
Click to expand...
Click to collapse
T-Mobile has different LTE speeds depending on the area you live. In southern California T-Mobile's LTE is a little faster than ATT. Since both are GSM you will definitely have 3G, if on that phone HSPA+, but not sure on LTE. I was thinking that ATT and TMobile had LTE on different frequencies as they do not use the same towers etc.