Hi, I have a Moto G 4G, I installed Cyanogenmod 12 and in options developer, I used an option that was to update the recovery, and now I have Cyanogenmod Recovery, and want to remove it because I can not flash anything, after I upgrade to 12.1, and Play Service is stopped and can not flash the Gapps from the recovery please help, I am very desperate.
How I can change the current recovery?
download your desired recovery image and try flashing through Flashify or in Fastboot mode. don't know if this will work but you can give it a try, also disable the update recovery option next time
I tried doing that. It does not work for me [CM 12.1 running on Samsung i9100] .
I think the best course of action is to flash a recovery through Odin.
Related
Some how i managed to root my phone. As i was trying to install xposed i had to reboot my phone in order to go into custom recovery. Some how i managed to install a custom recovery by flashing something and got "team win recovery project". after that i tried to install xposed from the custom recovery but was unable to so i went back to and booted it in normal mode. after that i tried again to install xposed by going to custom recovery but couldnt go to it. so i went back and flashed the custom recovery team win recovery project and when i booted it it worked it sent me to the custom recovery page but then still couldnt install exposed so i tried to go to normal mode but all it goes to the custom recovery. i factory reset it through the lg factory way and also through the custom recovery page but still all i get is the custom recovery page please help thanksss
Hi
Thank you for using XDA Assist.
Please check this thread: http://forum.xda-developers.com/android/development/guide-xposed-boost-stylo-5-1-1-t3192494
Good luck.
Hello guys, I desperately need help :/ Today i unlocked bootloader, installed custom recovery (twrp) and then flashed nightly version of cm 13. However I didn't like it and then decided to install cm 12.1 . I did full wipe and then flashed cm 12.1 and after that phone can't boot. what should i do?
P.S. i can only access fastboot, when i choose recovery twrp logo shows up and then phones begins to boot ROM.
Hello guys, I desperately need help :/ Today i unlocked bootloader, installed custom recovery (twrp) and then flashed nightly version of cm 13. However I didn't like it and then decided to install cm 12.1 . I did full wipe and then flashed cm 12.1 and after that phone is stuck on boot for an hour. what should i do?
P.S. i can only access fastboot, when i choose recovery twrp logo shows up and then phone begins to boot ROM. So maybe it's good idea to install another recovery?
I Have the same problem, plz help us.
This is what I did - http://forum.xda-developers.com/moto-g/help/enter-recovery-root-xt1039-t3287678
hey guys i tried many a times to install custom rom on my samsung s6 coz i am bored with touchwiz marshmallow
soo when i flash twrp with odin and when i enter TWRP and then reboot without doing anything it wont reboot it just keeps comming Samsung s6 boot again n again
SOO i need help guys i have CM13 for samsung s6 and in installation also it creates error of updater error 7
i edited updater-script and removed setprop line and when i flashed it successfully flashed but when i reboot to system it shows samsung s6 boot with kernel is not seandroid enforcing
Please guys help me to fix i am bored with touchwiz want to use other rom help
CyanogenMod is not ready for daily use. You don't want to install it on S6.
Conenct your phone to PC in download mode and use "Rescue firmware" option on Smart Switch to reflash latest software.
Then, if you want to install TWRP, flash THIS TWRP via Odin after reflash firmware via Smart Switch;
http://www.arter97.com/browse/S6/kernel/13.1/g920fi/arter97-recovery-g920fi-13.1-twrp_3.0.2-0.tar.md5
After you've flashed, boot into TWRP and install this zip via TWR;
https://download.chainfire.eu/964/SuperSU/BETA-SuperSU-v2.74-2-20160519174328.zip?retrieve_file=1
Then, reboot the system.
forumber2 said:
CyanogenMod is not ready for daily use. You don't want to install it on S6.
Conenct your phone to PC in download mode and use "Rescue firmware" option on Smart Switch to reflash latest software.
Then, if you want to install TWRP, flash THIS TWRP via Odin after reflash firmware via Smart Switch;
http://www.arter97.com/browse/S6/kernel/13.1/g920fi/arter97-recovery-g920fi-13.1-twrp_3.0.2-0.tar.md5
After you've flashed, boot into TWRP and install this zip via TWR;
https://download.chainfire.eu/964/SuperSU/BETA-SuperSU-v2.74-2-20160519174328.zip?retrieve_file=1
Then, reboot the system.
Click to expand...
Click to collapse
i have also flashed noble rom same issues pls ****ing help
and btw when i flash arters recovery i can successfully log in its recovery but later on when i flash something and press reboot system then that button doesnt work it just shows it was pressed and is stucked there and can't even move from there
Hi,
I'm using LG G3 AT&T (D850). When I bought it, It had Philz recovery already installed but Philz recovery installed is of LG G3 VS985. I want to flash Lineage OS but I can't because Philz recovey gives me an error saying: "This Zip is for device D850 and you're using VS985".
I tried to installed TWRP by using PC and also by using Flashify. There was no problem in installation but When I try to boot into recovery, There's nothing except black screen and Red blue Flashing led lights(Notification lights).
When I flash VS985 Philz recovery into my phone, The recovery works. And The CWM app is showing that I have two recoveries installed namely CWM and TWRP.
Please help
AbdulSammad said:
Hi,
I'm using LG G3 AT&T (D850). When I bought it, It had Philz recovery already installed but Philz recovery installed is of LG G3 VS985. I want to flash Lineage OS but I can't because Philz recovey gives me an error saying: "This Zip is for device D850 and you're using VS985".
I tried to installed TWRP by using PC and also by using Flashify. There was no problem in installation but When I try to boot into recovery, There's nothing except black screen and Red blue Flashing led lights(Notification lights).
When I flash VS985 Philz recovery into my phone, The recovery works. And The CWM app is showing that I have two recoveries installed namely CWM and TWRP.
Please help
Click to expand...
Click to collapse
Actually You Have Broken Your Phone's Recovery . Your Phone's Bootloader Was Locked And You Flashed A Bumped Image By Flashify .
.
You can install through flashify only on kitkat and you need to flash a bumped recovery image .
On Lollipop , you cannot flash a bumped recovery directly by flashify . You need to flash it through pc by IMAGPREP tool which can also brick your phone if used stupidly .
.
So , my advice is to go back and flash the stock kitkat firmware through lg flash tool .
after that you can easily root your phone and install a bumped recovery by flashify .
If You Want To Flash bumped Philz Recovery ,
Then this is the only thread in xda https://forum.xda-developers.com/att-lg-g3/development/recovery-cwm-philz-touch-6-advanced-t3632940
If you want to flash bumped twrp , then visit https://dl.twrp.me/d850/
I am on kitkat
Mansoor4139 said:
Actually You Have Broken Your Phone's Recovery . Your Phone's Bootloader Was Locked And You Flashed A Bumped Image By Flashify .
.
You can install through flashify only on kitkat and you need to flash a bumped recovery image .
On Lollipop , you cannot flash a bumped recovery directly by flashify . You need to flash it through pc by IMAGPREP tool which can also brick your phone if used stupidly .
.
So , my advice is to go back and flash the stock kitkat firmware through lg flash tool .
after that you can easily root your phone and install a bumped recovery by flashify .
If You Want To Flash bumped Philz Recovery ,
Then this is the only thread in xda https://forum.xda-developers.com/att-lg-g3/development/recovery-cwm-philz-touch-6-advanced-t3632940
If you want to flash bumped twrp , then visit https://dl.twrp.me/d850/
Click to expand...
Click to collapse
I'm on kitkat