Database Info

I wanna remove the clear lockscreen and put the original one??

I am on fresh 1.1 but i dont like the clear lockscreen. Is there a way i can change it??

yes try looking

just push this to system/app
you can use the fresh kitchen or adb
btw you can take apps out of any rom.zip on your computer, that's where i got this

Thank You thedudejdog it worked perferct

You can take the HtcLockscreen.apk out of the /system/app dir of any ROM you like to get that rom's lockscreen going.

thedudejdog said:
just push this to system/app
you can use the fresh kitchen or adb
btw you can take apps out of any rom.zip on your computer, that's where i got this
Click to expand...
Click to collapse
am a newly rooted hero owner. read/re-read/followed the steps to do it on this forum and am grateful to those who lent their knowledge/expertise.
want to have the original hero lockscreen and downloaded this HtcLockScreen.apk file.
i searched online to see if i could find instructions to push this but can't seem to figure it out.
i've done the following:
- copied HtcLockScreen.apk to the root of my sd card.
- opened a command prompt
- got to "C:\android-sdk-windows\tools>"
from here am i supposed to type:
- "adb shell"
- "su"
'cause i think to push this is the command, right:
- "push /sdcard/HtcLockScreen.apk /system/app/"?
help please!
thank you.

ok, put the file that you want to push in your tools directory of the sdk (c:\sdk\tools) these are the commands to push the file using adb
make sure you are in the command prompt and in your android sdk/tools directory.
you can copy/paste these one line at a time
i always do a
Code:
adb devices
first just to make sure adb sees your phone. if your phone shows up then continue
then mount system read/write
Code:
adb remount
then push the new lockscreen (this will overwrite the one that is there now)
Code:
adb push HtcLockScreen.apk /system/app
then close the cmd prompt window
Code:
exit
or you can use the fresh kitchen for a nice gui that does all the dirty work for you.
then reboot and there ya go, new lockscreen (or whatever)
i've never used the shell to push files, but i assume those commands that you listed should work for that, but you have to remount the filesystem first.

I thought I saw on here a little while back that showed you how to remove just the image from the lockscreen so all you have is the grey bar. Does anyone know where that is because I thought that that was kinda cool.

thedudejdog said:
ok, put the file that you want to push in your tools directory of the sdk (c:\sdk\tools) these are the commands to push the file using adb
make sure you are in the command prompt and in your android sdk/tools directory.
you can copy/paste these one line at a time
i always do a
Code:
adb devices
first just to make sure adb sees your phone. if your phone shows up then continue
then mount system read/write
Code:
adb remount
then push the new lockscreen (this will overwrite the one that is there now)
Code:
adb push HtcLockScreen.apk /system/app
then close the cmd prompt window
Code:
exit
or you can use the fresh kitchen for a nice gui that does all the dirty work for you.
then reboot and there ya go, new lockscreen (or whatever)
i've never used the shell to push files, but i assume those commands that you listed should work for that, but you have to remount the filesystem first.
Click to expand...
Click to collapse
thank you! it worked...

how do you change folder permissions???

hi
how does one change folder permissions? i have read that you cam do it with the root explorer app but is there a way to do it on the pc using the sdk? i connected my phone to the pc and issued the adb shell command and then attempted to use the chmod command but got a read only file system message.

dsMA said:
hi
how does one change folder permissions? i have read that you cam do it with the root explorer app but is there a way to do it on the pc using the sdk? i connected my phone to the pc and issued the adb shell command and then attempted to use the chmod command but got a read only file system message.
Click to expand...
Click to collapse
1) If you have ADB setup on your computer, hook your phone into the computer and connect into it via ADB.
2) Once in, "chmod" the directory or file(s) you wish to change permissions for.
IF you don't have ADB:
1) Download a terminal
2) su - to root
3) Change your directory
4) "chmod" to whatever pemissions you want

it means that folder/file you're chmod'ing was mounted ro. you cant change anything if its mounted as ro. to check just enter "mount" and you can see what are mounted as rw, ro etc
yantz

I would also suggest changing it back when you're done. This helps prevent you from accidently overwriting or deleting something and have to reflash if you're rooted.

how to use themes from theme repo

sorry guys forgive my dumpness but i downloaded theme from the topic . after i replaced the apk files through root explorer and made restart to the device after that my x10 couldnt start i reflashed root steps but i really still want to change this stupid blue colore is there any easy way to do it . i wanna use the themes that already made from devlopers it comes like normal apk files........thanks in advance
Sent from my X10i using the XDA mobile application powered by Tapatalk

see Here *10chars*

What files do you have exactly? framework-res.apk? Phonebook.apk? Phone.apk
This thread as given above is taken that you have ADB installed on your computer.
http://forum.xda-developers.com/showthread.php?t=714288
If you do not have ADB, visit this thread first.
http://forum.xda-developers.com/showthread.php?t=532719
Feel free to ask if you have more questions

xGary said:
What files do you have exactly? framework-res.apk? Phonebook.apk? Phone.apk
This thread as given above is taken that you have ADB installed on your computer.
http://forum.xda-developers.com/showthread.php?t=714288
If you do not have ADB, visit this thread first.
http://forum.xda-developers.com/showthread.php?t=532719
Feel free to ask if you have more questions
Click to expand...
Click to collapse
i have framework-res.apk? Phonebook.apk? Phone.apk
and i know about adb commands but i wonder what is the diffrences it's all about replacing apk files and i manged that with root explorer and the guide is too hard it's all about modfications of the system files but it didn't tell us how to use an exsiting theme files ....is it all about the remount command that make us have to use adb ??? thanks in advance

h.boushi1987 said:
i have framework-res.apk? Phonebook.apk? Phone.apk
and i know about adb commands but i wonder what is the diffrences it's all about replacing apk files and i manged that with root explorer and the guide is too hard it's all about modfications of the system files but it didn't tell us how to use an exsiting theme files ....is it all about the remount command that make us have to use adb ??? thanks in advance
Click to expand...
Click to collapse
Not sure if ADB is required but thats the only method I know of. A step by step guide (Might want to double check with advanced users)
1) Install ADB and set the environment variables, etc.
2) Go to the folder (Should be c:/android-sdk-windows/tools) and open adb.exe (If it flashes and auto closes, open up cmd [Start>Run>cmd] and drag the adb.exe into the cmd and press enter)
3) Put Phone In Debugging Mode Settings>Applications>Development>USB Debugging
In ADB, type these commands
*Note that the commands are case sensitive*
Pull the files you are about to replace with the following commands:
cd c:/anrdroid-sdk-windows/tools
adb pull /system/framework/framework-res.apk framework-resk.apk
adb pull /system/app/Phonebook.apk
adb pull /system/app/Phone.apk
4) Now framework-res.apk, Phonebook.apk, and Phone.apk should be in your tools folder where your adb.exe is. Put these files somewhere safe.
5) Now drag your new framework-res.apk, Phonebook.apk, and Phone.apk into the tools folder.
6) Go back to adb and type the following command:
adb shell mount -o remount,rw -t yaffs2 /dev/block/mtdblock2 /system
7) Now these commands will move your new theme files to the sdcard:
adb push framework-res.apk /sdcard/framework-res.apk
adb push Phonebook.apk /sdcard/Phonebook.apk
adb push Phone.apk /sdcard/Phone.apk
8) Now these commands will install the new theme files in the sd card from the previous step:
adb shell dd if=/sdcard/framework-res.apk of=/system/framework/framework-res.apk
adb shell dd if=/sdcard/Phonebook.apk of=/system/app/Phonebook.apk
adb shell dd if=/sdcard/Phone.apk of=/system/app/Phone.apk
9) Now your phone will restart (If not, manually restart) and your theme should be installed.
Gary~

thanks a lot man ... you are the best i'll try that and report back but any way you still the best.....
Sent from my X10i using the XDA mobile application powered by Tapatalk

why every time i put the mount command it tells me "the device not found"
and the pull commands don't seems to work
i tried adb devices command but it seems it doesnt found my device

Mmm...maybe its sound dumb, but I'm a noob in this. How do you change the battery icon? Thx

rein_hiryu said:
Mmm...maybe its sound dumb, but I'm a noob in this. How do you change the battery icon? Thx
Click to expand...
Click to collapse
You pull the framework-res.apk file and open it with 7-zip. Inside should be some folders and there should be a folder (forgot which one) with a bunch of pngs. Replace the battery icons with desired ones.
Gary~

ADB issues

Okay, so i trying to push a file to my SGS4G... I thought i got it to work but when i went to find the file it was just some random file with no extension.
e.g. I typed (adb push FFFFFF.FFF /sdcard/download) it says the file was copied but when i go to my phone ffffff.fff is not there, instead a file called /sdcard/download
I followed these instructions....
A:android-sdk-windows installed
B: (on your phone) go to menu>settings>applications>developement and make sure usb debugging is checked.
C: the file you are pushing must be placed in the tools folder of adb so if you are pushing file "build.prop.txt" this needs to be downloaded/copy and pasted in C:\android-sdk-windows\tools
1: go to run and type cmd (or just open your command prompt)
2: cd C:\android-sdk-windows\tools
3: adb remount
4: adb devices *if everything is set up right this should output a serial number*
5: adb push FFFFFFF.FFF /#####/###### *i hope my notes help here you need to put the file name in for the F(s) and in the pound signs you put the destination on the devices example adb push build.prop.txt /system/bin
6. repeat step 3 for multiple files
7. adb reboot this is how you finish
What am i missing?

i see you are trying to push a file to your download folder on the sd card...
you can just drag and drop for stuff like this.

true true, not sure why i didnt think of that, i do it all the time... But would i use those instructions if i wanted to move a file say a recovery file to the bin directory?

i have never seen the need to use adb for this phone. it is not a nand locked device, so there is no real use for it (im speaking for users, not devs). if you want to push a file, jsut use root explorer or similar. thats all you need.
also, it seems to me like you are trying to get krylons cwm. just flash bali instead. no need for the recovery file or update.zip.

White / Black Clean Bootanimations

I really like the original Bootanimations of the One S, but the "tm" and "BeatsAudio" always bugged me, so I decided to modify both ( the original one and the one used in TrickDroid ) and share them with you.
ROOT REQUIRED
How to install: ADB
-Make sure you got the Android SDK installed
-Open a CommandPrompt and cd into the adb.exe directory
example:
Code:
cd "C:\Program Files (x86)\Android\android-sdk\platform-tools"
-Connect your Device with USB-Debugging enabled to your computer
-Remount Partitions
Code:
adb remount
-Now send the Bootanimation to the Device
examble:
Code:
adb push "C:\Android\HTC One S\Bootanimations\Original Black Clean\hTC_bootup_one.zip" /system/customize/resource
After typing in "adb push " you can simply drag&drop the file into the CMD
Preview + Download
Black Clean
Download
White Clean
Download
Note
Make sure you rename the file before you push the whole thing to your device ;-)