"Data error cyclic redundancy check" transferring files from Android to Windows?
This may be a Windows problem rather than Android, which is why this is going in off-topic. Trying to transfer files from two Android devices to my Windows 7 desktop results in a "data error cyclic redundancy check" failed transfer. At first I thought the problem was my note4's SD card (after googling the error), but it just occurred with my Nexus 6 as well.
Googling says it's a windows problem, but all of the results have to due with HDD and chkdsk. I've got an SSD, so I don't think those solutions apply.
Any suggestions?
Thanks
Related
Hello ppl
Yesterday I noticed a bunch of files in my storage card, possibly fake ones or junk ones... problem is they're to large to be "real", since I've got a 4GB SD with about 1GB free space.
They're a total of 6 files, four of which are named like "z≥┼3>ô½`.>ô½", "╡Ü`^ô½`.WÜô" etc and are 1.50GB large each, and another two, "MZÉ" and "t", sized 0kb!
Plus, they can't be deleted. Even though they're visible through my pda's explorer (both windows and resco) and my pc when connected, if I try to delete them I get a "file not found" error!
Any ideas? Should I just take a backup of my files and format the card?
akpidis said:
Hello ppl
Yesterday I noticed a bunch of files in my storage card, possibly fake ones or junk ones... problem is they're to large to be "real", since I've got a 4GB SD with about 1GB free space.
They're a total of 6 files, four of which are named like "z≥┼3>ô½`.>ô½", "╡Ü`^ô½`.WÜô" etc and are 1.50GB large each, and another two, "MZÉ" and "t", sized 0kb!
Plus, they can't be deleted. Even though they're visible through my pda's explorer (both windows and resco) and my pc when connected, if I try to delete them I get a "file not found" error!
Any ideas? Should I just take a backup of my files and format the card?
Click to expand...
Click to collapse
Hi,
Yes take a backup if possible and re-format, but check you're files are correct in the backup.
The syptons you describe, normally means that the File Allocation Table has been corrupted, so I would reccommend you attempt to get your files off as soon as possible and DO NOT Write any data to the card untill your backup is verified. Writing more files to the card could cause more corruption and possibly overwrite and damage files that allready exist.
Once you have verified your files, do a complete format of the card and test it before relying on any data on it. If you plan to keep using the card, I would recommend regular backups for a while too.
Cheers,
Beasty
Hi Beasty,
I have a similar problem, though no data loss. It keeps asking to format and when I try to format, it says "format not successful". Any idea?
Tried to format on a PC and got the same results!
KOR!
P.S. Just sent you a PM!
King of Rapture™ said:
Hi Beasty,
I have a similar problem, though no data loss. It keeps asking to format and when I try to format, it says "format not successful". Any idea?
Tried to format on a PC and got the same results!
KOR!
P.S. Just sent you a PM!
Click to expand...
Click to collapse
Hi KOR,
Stupid question, but is the write protect tab enabled?
Sounds as though the disk is damaged if not write protected, there are some tools that can force a format, but you must know the exact sizes........ Google should help
I have a problem while installing android on my AT&T Tilt, when I starting installing its gives me an error in command line
Failed to mount /system/bin/sh: can't access tty; job control turned off
and then its not continuing installation process, I thought that in first time it need a time but when the half of hour have passed I have reseted my device, I have tried some kind of build 1.0, 1.5 1.6 but its all the same. Could you help me with it what kind of error is it and how can I fix it to run Android on my AT&T Tilt
Thank you in advance
I had this once, in the end i formatted my SD card and started again and it worked flawlessly.
Try running a chkdsk on your SD card, or formatting and starting again, if you havent already!
I have done it three times and tried three different build of Android but it still gives me this error
I have no card reader for my PC I'm formating from the WM storage card tool FlashFormat
Kaiser32 said:
I have done it three times and tried three different build of Android but it still gives me this error
I have no card reader for my PC I'm formating from the WM storage card tool FlashFormat
Click to expand...
Click to collapse
Do you rename your downloaded system file to "system.sqsh" or "system.img" ?
example: You have to rename system-2009-08-08.img to system.img
Yes I have renamed but still with error but now I fixed this) I mean I have downloaded http://code.google.com/p/kaiser-hero/ Hero and it works than I have dowanloaded 1.6 version from http://www.androidonhtc.com/kaiser/latest_builds
Droid-Ion Donut 1.6 bt it gets error again and than I have downloaded the same DONUT[ION] from this site and its works but it gives me an error while incoming call it stops com.android.phone process and GSM communication is anavailable
Im having an issue trying to load a ROM onto my Rooted captivate. I have just started getting into this kind of stuff with my phone, and am looking for a new look. When I open up my SD cards root directory (or what I think it is :S, I plug my phone into computer, and select mass storage device, correct me if this is the incorrect way), and try to drag and drop the "update.zip" for the custom rom, but when I try to do this, I get an error stating "an unexpected error is keeping you from copying the folder" and then "error x80070057: the parameter is incorrect".
I'm not 100% sure if I am doing this correct, but I have been searching around online for 3 or 4 hours on information on loading ROMS, LagFixes, and other things like that.
So, here's the problem - I was just using my phone normally, when it froze - no big deal, recently it has been getting slower and I was just planning on factory resetting it after I back up everything. But, when it booted and went on the start screen, it says "Scanning USB storage for problems" or something like that and it says then "Damaged USB Storage -You may have to reformat it" and unmounts my SD card, so, I have no storage altogether. When I click on the notification it asks if I want to format USB storage. I just want to know if there's a way of retrieving some files, because in my phone FIle Manager there's nothing, and when I connect it to the PC (Windows XP), it doesn't dettect any stotage, if I do it through "USB Utilities" on my phone it shows two Removable Disks on my computer, which are empty, when I click on them it just says "insert disk into drive", and if I click "Turn on USB Storage" on my phone it just keeps on trying to connect, but can't.
I tried restarting it, taking the battery out, booting without an SD card, booting into safe mode, using adb to pull some files, searched the internet for a few hours but to no avail, found this "Tenoshare Android Data Recovery" but it needs root, which I'm not, so I tried rooting it with SuperOneClick - doesn't work, tried installing super user from the recovery menu from SD card, but it can't install it - I'm wondering if it's wortht it. So, now I don't know what to do - do I root my phone using the methods here (with odin and etc) and use that utility, do I just factory reset it (maybe try recovering files after I've reset it?), or is there any other available option to somehow recover the files? I'm on Android 4.0.4 unrooted with Baseband version I9103XXLQ3 - I had installed it a few years ago (my phone came with 2.3.6 and I just followed the instructions here on updating my firmware).
I'll be very grateful with any help, I just had a few more important files and the last time I backed up was in December, so any help is appreciated
I have downloaded "AG-11 Bliss_OS-14-android_×86_64-20201125_k-kernal-5.8-si-next-fs_m-r_foss.iso" from Source forge. When I tried to install it in my 500 GB hard disk's 100GB partition, It gives the error "installation failed due to low disk space". My lenovo e41-25 has already had windows 10 64 bit in legacy mode. How do I solve the problem? Please help me to fix it.
Thank you.