hey guys, i noticed today that sometimes when i press the home button to wake the phone it doesnt react...when i press it again it works normally....this happened to me two times....did anyone see this?
That sounds like a hardware issue. The home button synthesize sensor must not be recognizing the pressure you are applying to the button. Did this happen after a software update?
I'm having the same issue with the home button being super spotty and straight not registering when I push the home button. This is super irritating. I constantly have to press the button and sit like an idiot while it does nothing, then press again.
LTE-X said:
That sounds like a hardware issue. The home button synthesize sensor must not be recognizing the pressure you are applying to the button. Did this happen after a software update?
Click to expand...
Click to collapse
i only noticed this today...and yes 2 days ago i have done an OTA update....
I have a Verizon version running 5.0.2
i tried now to see if this is happening when i am pressing the sides of the home button...and yes...it looks like sometimes i press the sides thats why it doesnt work....but the thing is my home button is a bit loose...so its easy to hit the sides...
I had the S4 and the Note 3. Never had a problem. If I press the button and it clicks it should work.
hajyihia said:
i only noticed this today...and yes 2 days ago i have done an OTA update....
Click to expand...
Click to collapse
Hmm that could be a number of things. It could be the hardware. It could be the update that you've installed that is causing wake lock on the device. Since your phone is covered by the one year limited warranty, I think you should contact Samsung and request an exchange/replacement. You can, however, try a factory reset to see if the wake lock problem goes away.
Ok I've been able to replicate the problem 100% if I choose. It is most definitely a hardware problem. If the home button is pressed on the left corner of the button it fully depresses and even clicks. But it doesn't register as so.
Definitely a hardware issue.
My phone had this issue as well where it wouldnt register soft clicks or off center taps and I would regularly get missed presses when using the phone (unless I pressed the button hard). I had verizon send me a replacement. The new phone just showed up, and the home button works almost perfectly. I can still get it to not register if I try really hard to push extremely lightly, on the very edge of the button with my finger nail, but its easily 100x better than the previous one.
The new button is also almost silent while the old one made kind of a cheap plastic click sound like it rattled slightly. It also feels like it requires a tad less force to press than the old button. The old button I could easily recreate the issue 100% of the time by just pressing lightly or pressing off center and it would regularly bother me while using the phone.
Buttons don't work
Front buttons stops working, then i reset phone they work some time and again stoped everything else work fine.
I have warratny but from shop they sadi that buttons working i don't now what to do pls for help.
Krizatata said:
Front buttons stops working, then i reset phone they work some time and again stoped everything else work fine.
I have warratny but from shop they sadi that buttons working i don't now what to do pls for help.
Click to expand...
Click to collapse
Here is a "solution" that has worked for me. My S6 is the Verizon variant, but I think these steps will work on any Service Provider.
Settings > Accessibility > Dexterity and interaction > Assistant menu
From here, toggle the switch to "ON". This will create a hovering circle with a window with four panes inside it. If you interactive with the hovering circle it will open a new window in which you have access to the back and recent apps buttons via an onscreen button.
Not sure what has disabled the hardware buttons, but this should give you access via onscreen software.
I know it's not a true fix, but a work around.
If someone finds a true fix, please post it! But in the meantime ...
I hope this helps!
Hello,
I had a S6 and after 4 days I noticed loose home button: it made noise the tap on it (not press). And also didn't registered clicks on the left side.
I exchange it for another and this one is almost perfect. I notice the left side of the butto to be a bit pressed. Anyway, I suspect a harware issue.
Lollipop 5.1.1
This video worked for my GS6
hajyihia said:
hey guys, i noticed today that sometimes when i press the home button to wake the phone it doesnt react...when i press it again it works normally....this happened to me two times....did anyone see this?
Click to expand...
Click to collapse
youtu.be/K-zLB7XMihE[/url]
My home button stopped working all together right after an update. How can I remove this issue? Every thing else works perfectly. Please help!
I have issues with my home button as well, it's "loose" and rattling. It has always been a bit loose but the last few months it has gotten worse and worse, it started to require more and more pressure to register the press (way beyond the pressure needed for it to *click*). As of now it does not even work at all, no matter how hard I try pressing it.
I've tried the assistant menu that's mentioned here in the thread but I just find the menu annoying. Instead I have learned to live with it for the time being, I just multitask to instagram or facebook and then spam the back button until I'm back at home.
100% hardware issue.
Apparently it's possible to replace the home button, and there are replacement home button to buy from ebay, but the replacement procedure is ridiculuos. The home button is basically the last thing you will demount from the phone when disassembling it.
I found a temporary fix by dabbing the home button with Isopropyl, this made it like new again. But two days later it's back to as it was before, or maybe even worse.
Annoying as hell, especially since this is a result of poor quality control from Samsung.
Update: Found a nice little app on play store called "button remapper" which lets me rebind the default system buttons without requiring root, i have rebinded the "recent apps" button to act as a home button instead, and a long press opens the regular "recent apps". Seems to be an alright workaround.
Just go to samsung shop,let them see,if no exchange or replace or fix, take their demo phones like s8 (2017) throw on to the floor and then take any phone u want, leave the s6 phone alone (make sure it is factory reseted).Ran away and shout #ALLAHUAKBAR!
Related
Folks, any idea how to switch off the screen / lock the keyboard without the need of double press the red power button?
This is kind of bothering cause when you're in a application and need quickly to put your Treo into your pocket, you need to press 1st to get to the home-screen and 2nd to switch off.
Yeah, seems to be something new with the 750 (no other treo before did this). Palm set this up purposely, so I wouldn't assume there's a workaround for it. You'll get used to double clicking
Not that I know
I have used it for ages and found many shortcuts but no "quick lock".
Sorry
How about getting an application that device locks your phone upon return from standby? I use BatteryStatus Today Plugin by Chi Tai Dang.. This plugin has the option to lock device on wakeup and set cpu speed(I use this a lot)..
But mine's a wizard, what do I know about Treo.. but what I do now is, press the power button to get the phone to go into standby and when I want to use it again, I press the power button and it will device lock upon wake up.
I don't have a Treo. How do you initiate said keyboard lock normally?
V
vijay555 said:
I don't have a Treo. How do you initiate said keyboard lock normally?
V
Click to expand...
Click to collapse
"Device lock" that you may know of isn't used on Treo's. Palm uses their own "keyguard," which uses the red END button as a power button when not on the phone. If you are on the today screen, one click will shut the device off. However, if you are in another program, the first tap brings you to the today screen, and the second click turns the screen off (and the keyguard on if you have selected it to be that way). On all other treo's, WM or POS, one click of the end button would shut the screen off (unless you were on the phone obviously, it would be the END function), regardless of what program you were in. Palm changed this, I assume, to be like most cell phones, where when you press the END key it returns to the home screen, regardless of what you were doing. Like a RAZR would do.
Thats the best way I can explain it. You would be surprised Vijay on how many customizations Palm made to the OS.
Yes, I've heard that they did - thank Goodness one of the OEMs finally saw fit to do something original.
Hmm.. from what you describe, clicking twice doesn't seem like a very big chore... I did something similar in VJOkButt. Is it really necessary to convert the 2 clicks to 1 click? Investigating it barely seems worth the effort
V
I agree, hence my original post.
When you are on the today screen, it works normally. And you can double-click quite rapidly and it will work. Not a big deal for me.
yes guys, its not that dramatical, but still, it would be an improvement also considering that I want to stay in that one application (a note which I'm editing) and want to get there after waking up the device again without the need of again starting application, look for the last note, opening etc...
with HTC hermes and others the power button works exactly like this and its even better.
Hi all,
If you're using it two handed hold option (the white key, left hand end of row 3) and press the red button once - closes the app and powers off.
But you need an odd-shaped hand to do that one handed!
It is not that the double click isn't easy to do, it's waht fire00 said; if you are in an app, it closes it and then powers off. Case in point, this weekend while driving to a friend's house, I had directions in my email and would have liked to have turned off the phone, but then I would have to find the email again and open it up. On my Wizard, i would just turn it off and then back on and the email would be there for me.
Gotta be a reg hack for someone to find.
mackangus said:
If you're using it two handed hold option (the white key, left hand end of row 3) and press the red button once - closes the app and powers off.
Click to expand...
Click to collapse
On my device, that method doesn't close the app. It just locks the keyboard and then powers off. When I power on again, the app is still running and on screen. I think that's what fire00 was looking for.
pjcace said:
It is not that the double click isn't easy to do, it's waht fire00 said; if you are in an app, it closes it and then powers off. Case in point, this weekend while driving to a friend's house, I had directions in my email and would have liked to have turned off the phone, but then I would have to find the email again and open it up. On my Wizard, i would just turn it off and then back on and the email would be there for me.
Gotta be a reg hack for someone to find.
Click to expand...
Click to collapse
Sorry PJC ACE, my mis-type - using option + red button powers the device off WITHOUT closing the app - just like the power button on the Wizard ;-)
My apologies!
GUYS YOU'RE ABSOLUTE TREO-EXPERTS !!!!!
thanks a lot, going to dance with the Treo cause I'm so haaapyyy !! )))
fire00 said:
GUYS YOU'RE ABSOLUTE TREO-EXPERTS !!!!!
thanks a lot, going to dance with the Treo cause I'm so haaapyyy !! )))
Click to expand...
Click to collapse
Option (hold)+Red Phone button is a nice alternative, but I'd really like to find a way to prevent the Red Phone from reverting to the Today screen, so I can power off directly with it with one press...Vodafone's excuse for specifically asking for it this way (every other phone's "End" button brings you back to the "home" screen) is ridiculous, these aren't like every other phone.
I installed HTC home plugin and now my red button wont let me go into standby. I uninstalled and still not working. Any ideas?
Side Button + Suspend
There is a thread at TreoCentral that explaines how to activate the side button and make it available for button assignment in the settings screen.
Second there is a small program called suspend.
I have mapped the 1 press of the side button to suspend and away we go.
1 - Click keyguards/screen off.
Also it resume in the place or program you left when you unlock it.
Regards
I'm using Butler [ http://forum.xda-developers.com/showthread.php?t=464611 ] to use the extra functionality of the hardware keys ... the only thing missing for me now is the possibility to use the 2 top buttons of the touch pro [Home and Back] for the left and right softkey (that's the only thing I miss from the kaiser). Any ideas how to do it without AEB ?
And is there a program you can launch to go to the today screen?
I'd be interested in this also. Thus far Da_G's latest roms have been able to reprogram every button except volume, home, and back keys.
Unfortunately the Volume, Home, and Back keys give me the most trouble. I always keep my phone on vibrate and I never use the Home/Back buttons. Even a good way to simply disable these keys would be a start. I'd much rather be able to use my dpad without ending up at the today screen.
Although someone said they used AEB to remap the Home/Back buttons to ONLY function on a double tap.
i was just thinking about this. i noticed i could change long press for send and end as soft keys. not enough buttons on the device you know.
I also would love to be able to reprogram the home and back keys to be the left and right softkeys. There has to be some way to do it...
I did some more searching on this topic. Try DredSensor. It works for me so far.
drcursor said:
I'm using Butler [ http://forum.xda-developers.com/showthread.php?t=464611 ] to use the extra functionality of the hardware keys ... the only thing missing for me now is the possibility to use the 2 top buttons of the touch pro [Home and Back] for the left and right softkey (that's the only thing I miss from the kaiser). Any ideas how to do it without AEB ?
And is there a program you can launch to go to the today screen?
Click to expand...
Click to collapse
If we can get the home, back button, set as left and right softkeys as well as set pressing the center button in as OK button then i would have zero complaints about my att fuze. Sometimes i turn my tilt back on just to use programs such as opera mini, life is so much easier with softkeys!
DarrenUtd said:
I also would love to be able to reprogram the home and back keys to be the left and right softkeys. There has to be some way to do it...
Click to expand...
Click to collapse
Yes im sure everyone is aware of dredsensor which is what i have to use when running opera mini on my fuze. What we are talking about is setting the home and back button as softkeys for good for all apps by default and also having the center button as OK as well. Do we really need a home and back button anyways? I mean we have touch screen phones, i can drag my thumb to get to home screen and press the center button to go back if set to OK button.
No we don't need an Home and Back button. The home button works the exact same as the End key. The back button is iffy. While I don't use it much, I'm sure "some" people do. There are the occasional situations when the back button is useful.
If you make the Center button "Close/Ok", then you won't have a select button. What WOULD work is set the center button to default, but do an "Close/Ok" on Center Hold.
I wish we had all the buttons unlocked to do what we wish. Using Home/Back as softkeys aren't a big deal to me, BUT being able to at least disable them or remap them in games would be sweet. (yes I know about DredSensor... I'm talking about permanent).
Another thing I am aiming for is a "virtual D-pad" using the touch pad area around the center button. Allowing us to navigate simply by making contact to the "hotspots". This would at least fix the problem with using the Dpad in games without ending up at the today screen.
If we could offload the navigational functions to the touchpad... then we could remap the buttons up/down to launch programs or whatever (left and right too).
So Pressing the buttons on the touchpad could launch apps or be used as softkeys or whatever but touching the touchpad would navigate.
Here is the thread; http://forum.xda-developers.com/showthread.php?t=473023
The last couple of posts have been playing down my earlier suggestion to use dredsensor to remap the home and back buttons to be the left and right softkeys (the topic of this thread). I'm not affiliated with dredsensor in any way, but I wanted to clear up this issue.
Since version 1.1 was posted on 1/17, you can in fact remap the buttons as stated above. In your config.ini file, for the [Default] profile with WindowTitle=* and ClassName=*, you have the entries:
HardKey_Launch1=Key:SoftKey1and
HardKey_Launch3=Key:SoftKey2
I'm not sure what you guys mean by "permanent" or "for good for all apps by default", but with this configuration these rules should apply in any app, which would seem to be what you want. I've been using this for a few days now and it works for me in the applications I've used. Anyway, it's just a suggestion. Maybe give it a try and I hope it helps.
i followed your suggestion..but i find the behavior erratic..sometimes it looks like it just goes to sleep and the keys are back to normal, and then out of nowhere starts to run again :\
drcursor said:
i followed your suggestion..but i find the behavior erratic..sometimes it looks like it just goes to sleep and the keys are back to normal, and then out of nowhere starts to run again :\
Click to expand...
Click to collapse
From what I've read, there could be problems if you have G-Scroll installed, or maybe on some specific ROMs. Maybe post the issues you are having so that the developer can fix it in the next version.
http://forum.xda-developers.com/showthread.php?t=472280&page=2
The quick search box is by far the single most annoying thing on this phone. Not a feature I could ever find myself using, even if I knew how to use it properly. If I hit the home or back soft button, at random times it comes up. Some times I have to hit back or home 5 times or more to get back or back to the home screen. Some times it seems like it depends on how you hit the soft keys and sometimes I can not get the quick search box to come up no matter what I do. Am I the only one having this issue? Anyone have any insight on this?
The only time it comes up unexpectedly for me is when I touch the magnifying glass by mistake. If your phone is mixing up the buttons you should probably send it back.
Sent from my SAMSUNG-SGH-I897 using XDA App
After trying my brothers Captivate I found that if I push on the home or back button with any sort of force beyond a light touch the magnifying glass is blinking on my phone, activating the quick search in a handful of programs. Looks like I have a defective phone. Anyone else have this issue?
My quick search only launches it I top the magnifying glass soft key.
A long press on the Menu key will also bring it up, by design, a carryover from the I9000 since it doesn't have a dedicated search key.
@clay I just tried to replicate that but tapping hard on the home and menu keys. There is a creak from the back cover's latch but none of the other buttons activated. I don't see why they would since they are not resistive. Pressure should have nothing to do with it.
Sent from my SAMSUNG-SGH-I897 using XDA App
When I hold my phone the bottom rests on my pinkie. Ever since getting the phone, having it rest on my pinkie will activate the recent apps button and trigger multi window. It's like the frame is contacting the capacitive key and acting as a conductor. Not sure if I should return it or if it's normal?
I have this issue of S7 flat. Not always but randomly, e.g. I swipe down and application switch enables itself. Or I press the button and multi window dialog displays.
Same thing is happening to me. Randomly comes up when my finger is on the bottom left side.
sadly me too also ... i reported samsung and they told they will call back . nobody called till now.. i think samsung did some wrong on recent app button hardware.. i am having s7 edge.
Me too
Back too
Sides as well
Overall, I find the screen and the capacitative buttons way too sensitive
Looks like this 42mb update fixed it as I can not reproduce it
The update did not fix it for me. I'm still finding that when my thumb isn't even touching the back button, but just hovering over it a few mm, that it activates the back button. Also, when scrolling through pages, I've noticed ghost button presses of the back button.
Having the same issue on my s6 edge, it's like my pinkie somehow triggers the recent apps button and after that, if i press a little bit to the left of my back button, it will always trigger recent apps. Usually happens when im in bed browsing something on the phone and it gets tilted to the left side. Only reboot seems to be helping to get rid of it.
i have the same issue. It doesnt bother too much atm, but it can become annoying. Im using s7 edge exynos variant. There are quite a few reports on internet about it, but no solution yet
Hi,
Prior to updating to the newer firmware, my Bixby button would work all the time (I remapped it using BxActions). After the update, I've found that it works only intermittently. I've removed BxActions and have done a factory reset, but the Bixby button does not function all the time.
Wondering if this is due to the update or a hardware issue that I have?
I press it and nothing happens at all. Does this app need to be setup first?
Sent from my SM-G955W using XDA-Developers Legacy app
I also have this problem with the new update,but if you push quickly 2 times on the bixby button it will pop up.
Sent from my SM-G955F using XDA-Developers Legacy app
Same on my S8+. I need to press the button twice in quick succession for it to work.
It appears in their rush to disable the ability to re-map the Bixby button they somehow created an issue where Bixby does not always respond. I was beginning to think my button was malfunctioning, so I'm glad to see that it's just a software issue. However, this is not a great start for Bixby.
Same issue here on my S8+. You are not alone.
Good to see it's not a hardware issue. Yes, this looks worse for Bixby as they've gone from having Bixby as a choice (allowing remap) to it being not usable at all.
I too have this problem. In my case, even two quick presses in succession fails more often than it succeeds.
I have the problem too, combined with Bixby popping out of nowhere when unlocking my screen at times. Not a good start
They are saying it was done because a hand full or people fusses about hitting the button when they didnt want to.
The remapping was disable because samsung feels its there baby and they didnt want anyone change it lol.
xile6 said:
They are saying it was done because a hand full or people fusses about hitting the button when they didnt want to.
The remapping was disable because samsung feels its there baby and they didnt want anyone change it lol.
Click to expand...
Click to collapse
If Samsung is pushing Bixby as one of the key features of the S8, I would understand why they would disable the remapping. But I'm not sure why they would make it more difficult to access by making the button press more finicky!
So thats the reason, same here on my S8
I picked up my Verizon variant of the S8+ on launch day. I immediately noticed that the Bixby button was quirky. I thought at first it was a hardware issue and I would have to exchange my phone. After 2 days of playing with it I realized it was more of a software issue and then I came across this thread which confirmed my suspicion. I have also noticed that 2 quick button presses launches it no problem, but what makes think there is an actual software issue is because it ALSO sometimes randomly launches with a single press like it was supposed to. I have noticed that the single press (when it works) is significantly more laggy to launch then the double press which seems instantaneous. I have contacted Samsung support VIA Twitter to see if they have an explanation. I will post any updates. Please do the same if you find any more info.