Hello,
I'm lost into key ordering to put the folio 100 into different modes/stats...
Do i write synthesis, Can someone confirm this ?
(I probably found an interseting toshiba doc for locked/bricked folio to force reboot folio 100...)
MODES :
* Normal mode
This il the default starting mode, when you power folio100 running the OS.
* Recovery mode
This is the mode where you can reset the folio 100 default settings, and you can upgrade the ROM with new one automatically
(http://aps2.toshiba-tro.de/kb0/OPT0C032V0000R01.htm)
* Bootloader mode
With this mode you can propably use nvflash to collect and push data over folio100
or exemple to dump all partitions datas, etc...
ACCESS :
Power + VolumeUp : Recovery Mode access
Power + VolumeUp >> VolumeDown : (Cancel) Start OS
Power + VolumeUp >> VolumeUp : Recovery Mode menu
Power + VolumeUp >> VolumeUp > VolumeUp : Factory Reset menu
Power + VolumeUp >> VolumeUp > VolumeDown : System Update menu
Power + VolumeUp >> VolumeUp > VolumeDown > VolumeUp : System Update confirmation
4 x Power + VolumeDown >> Bootloader mode
5 x Power + VolumeDown >> BE CAREFULL : This seem to Lock/brick definitivelly the Folio (Firmware seem to go into a deadloop....)
But I dont' know if it's the solution, but you can apparently force Folio100 to reboot probably out of the deadloop firmware with the "force reboot pinhole"
(http://aps2.toshiba-tro.de/kb0/OPT0C032F0000R01.htm). I dont try this, I don't know if it's work, i hope Dexter_nlb do this try with hes bricked Folio 100
(seen here http://forum.xda-developers.com/showthread.php?t=831086)
Thanks to confirm me
Molux
PS: sorry for my bad english
Autoresponding...
Hello,
Hum...(<-- embarrased) I just undertand that back black platic panel it's very very easy to remove (unlike iphone & co, for exemple) to access to battery, etc...
So i think most of you found the "reset pinhole" a long time ago...
Dexter send me a message to clearly say that "Reset pinhole" DONT leave the "deadloop".
Actually there is NO SOLUTION to leave this deadlocked stat
Molux
WARNING! DO NOT FLASH YOUR DEVICE UNTIL YOU HAVE BACKED UP YOUR IMEI / NV DATA IN THIS GUIDE!
Click to expand...
Click to collapse
Click HERE for information on the long awaited and all new EFS Professional v2.0 including download! Now supporting Qualcomm devices!
Setting up QPST with your PC:
Dial *#7284# on your phone to access PhoneUtil and select 'Qualcomm USB Settings' at the bottom. Now select 'RNDIS + DM + MODEM' and press 'OK' to return to the previous screen. Now press your 'Back' key to exit PhoneUtil. Your phone is now in DIAG Mode.
Download and Install: SAMSUNG_USB_Driver_for_Mobile_Phones_1590.exe - 23.06 MB if you don't already have Kies or a USB Driver installed.
Download and Install: QPST v2.7.378.zip - 14.68 MB
Now connect your phone to the PC with a USB cable and wait for Drivers to install.
Start the 'QPST Configuration' application and select the 'Ports' tab then press the 'Add New Port...' button.
Select the COM Port that has 'USB/QC Diagnostic' next to it, change the Port Label if you like to 'Samsung GT-I9305' then press 'OK'.
You should now see your phone listed in the 'Ports' tab and the 'State' should indicate 'Enabled'.
You can now Close this application.
Backing Up IMEI / NV Data:
Start the 'Software Download' application and select the 'Backup' tab.
Press the 'Browse' button and choose a Save Location for your QCN File.
Press the 'Start' button and wait for it to finish. This will back up all your phones NV Items and save them to the QCN Backup File.
The resulting QCN Backup File should be 250KB.
Restoring IMEI / NV Data:
Start the 'Software Download' application and select the 'Restore' tab.
Press the 'Browse' button and select your QCN Backup File.
Press the 'Start' button and wait for it to finish. This will restore all your phones NV Items from the QCN Backup File.
Your IMEI / NV Data should now be fully restored. Dial *#06# on your phones keypad to check your IMEI is restored.
Restore USB Settings after Backup / Restore:
Dial *#7284# on your phone to access PhoneUtil and select 'Qualcomm USB Settings' at the bottom. Now select 'MTP + ADB' and press 'OK' to return to the previous screen. Now press your 'Back' key to exit PhoneUtil. Your phone is now back to default USB operation.
If the 'Qualcomm USB Settings' Button is missing from the PhoneUtil application then execute the following command in a Terminal Emulator to launch the Qualcomm USB Settings page directly:
su -c 'am start -n com.sec.android.app.phoneutil/com.sec.android.app.phoneutil.USBSettings'
Please Note: You must be rooted or this command will not work.
Click to expand...
Click to collapse
Recovering IMEI And Data Connection After Flashing WRONG Root Package Intended For I9300:
Make sure you have Samsung Kies or the Samsung USB Driver installed on your PC.
Download and Extract: Odin3 3.04.zip - 457.11 KB to your PC if you don't already have it.
Download and Extract: Param_Bin_I9305.zip - 612.14 KB to your PC.
With your Phone Switched Off, press and hold: 'VOL DN' + 'HOME' + 'POWER' to enter Download Mode.
Connect your phone to your PC via USB Cable and start Odin.
Check your phone is connected by seeing if a COM Port in a Blue box is present under ID:COM.
Press the 'PDA' Button and select the 'Param_Bin_I9305.tar.md5' file you extracted from the Zip Archive earlier.
Press the 'Start' Button and wait for it to finish flashing. If successful, you will see a Green Box with 'PASS!'.
Wait for your phone to reboot then go to your Dialer and press: *#06#. You should now see your IMEI and your Data Connection will be back.
If I have saved your bacon then please buy me a coffee!
well i guess this is what i'm going to be looking for.
So i have no IMEI on me device and I have no backup of the EFS.
Before I pm you:
1) do I need to have a rooted device to perform this? if so I can install your pre-rooted ROM.
2) when i go to *#7284# menu I see the following screen.
PhoneUtil
UART
[option(selected)] MODEM
[option] PDA
USB
[option] MODEM
[option(selected)] PDA
SAVE and RESET
so i have no "RNDIS + DM + MODEM" option, can this still work for me?
thanks
phew, was about to dive into flashing and then saw this thread. THANK YOU!
I am an iOS refugee. Totally new to android. I guess I'll wait for more developments to come out for my Quad core LTE S3.
Sent from my GT-I9305 using xda app-developers app
---------- Post added at 07:13 PM ---------- Previous post was at 07:09 PM ----------
ah tauran you saw this thread first, good good. Was about to actually pm to let you know that this thread is for you!
Hope you get your device working.
Sent from my GT-I9305 using xda app-developers app
tauran said:
well i guess this is what i'm going to be looking for.
So i have no IMEI on me device and I have no backup of the EFS.
Before I pm you:
1) do I need to have a rooted device to perform this? if so I can install your pre-rooted ROM.
2) when i go to *#7284# menu I see the following screen.
PhoneUtil
UART
[option(selected)] MODEM
[option] PDA
USB
[option] MODEM
[option(selected)] PDA
SAVE and RESET
so i have no "RNDIS + DM + MODEM" option, can this still work for me?
thanks
Click to expand...
Click to collapse
There is a 'Qualcomm USB Settings' button at the bottom of the screen in PhoneUtil. Press that and you will be able to select "RNDIS + DM + MODEM".
lyriquidperfection said:
There is a 'Qualcomm USB Settings' button at the bottom of the screen in PhoneUtil. Press that and you will be able to select "RNDIS + DM + MODEM".
Click to expand...
Click to collapse
Nope, still dont have that option.
Tried with/without USB connected
with/without usb debugging
with without SIM card inserted
but all these methods still result in the screen i described above.
Do I need root?
else, i guess i'm well and truly screwed.
tauran said:
Nope, still dont have that option.
Tried with/without USB connected
with/without usb debugging
with without SIM card inserted
but all these methods still result in the screen i described above.
Do I need root?
else, i guess i'm well and truly screwed.
Click to expand...
Click to collapse
No you don't need Root and just to confirm you do have the I9305 don't you?
I have the UK EE I9305 and when I dial *#7285# I have the 'Qualcomm USB Settings' Button at the bottom of the screen on PhoneUtil.
lyriquidperfection said:
No you don't need Root and just to confirm you do have the I9305 don't you?
I have the UK EE I9305 and when I dial *#7285# I have the 'Qualcomm USB Settings' Button at the bottom of the screen on PhoneUtil.
Click to expand...
Click to collapse
Yes, I also have UK EE i9305, purchased from t-mobile.
Would be interesting to see if the others who have lost their imei have also lost this option in the phoneutil menu. failing this, i really need to be able to reset the flash counter and have the status to "Normal" before i consider sending it back.
Yeah! Would be interesting to know that as if the 'Qualcomm USB Settings' button is missing then the whole process is pointless unless there is another way of invoking 'DIS + DM + MODEM'
@lyriquidperfection, many thanks for this, have made a backup just in case!
chippyuk said:
Yeah! Would be interesting to know that as if the 'Qualcomm USB Settings' button is missing then the whole process is pointless unless there is another way of invoking 'DIS + DM + MODEM'
@lyriquidperfection, many thanks for this, have made a backup just in case!
Click to expand...
Click to collapse
Don't worry there is a workaround, just need to do more testing before I release it. It is basically a set of commands originally for AOSP Roms which I modified specifically for the I9305 to manually Enable or Disable the Diag Mode. So this Backup and Restore method will work for everybody.
So all this time i had a useless efs backup . Omg
Sent from my GT-I9305 using xda app-developers app
when I try to dial #7284# or #7285# I get this message. I haven't flashed yet so everything is still pretty much Virgin. Can any one shed a light on this?
Sent from my GT-I9305 using xda app-developers app
Code is *#7284#
Sent from my Nexus 7 using xda app-developers app
Ok All done, That backup process took longer then expected for a 250Kb QN file..... So let me get this straight the 20mb EFS image i had backed up previously is useless? This new 250kb QN file is the heart of our device now and should be backed up everywhere?
Another thing what happens If we leave it in diag mode or whats the difference. Thanks I would like to learn alittle
EDIT: I learnt myself lol What happens if you leave it in Diag mode is you will not be able to see your phone in windows as a Portable device, which means you cannot copy and paste files the simple way from (My Computer)
I am still curios as to why the QN file is only 250kb comparing to the previous EFS.img, It might be a good idea to state in the OP that the file should only be this XXXX Large .. Just so people feel safer once they have completed the procedure
btemtd said:
Ok All done, That backup process took longer then expected for a 250Kb QN file..... So let me get this straight the 20mb EFS image i had backed up previously is useless? This new 250kb QN file is the heart of our device now and should be backed up everywhere?
Another thing what happens If we leave it in diag mode or whats the difference. Thanks I would like to learn alittle
Click to expand...
Click to collapse
It's all in the first post but maybe I need to make it a bit clearer. Phone should be in Diag Mode when performing Backup and Restore otherwise phone should be in MTP + ADB Mode.
The QCN backup file contains the data for all the NV Items in the NV Memory which is also where the IMEI is stored.
It doesn't hurt to backup the EFS partition aswell as it contains mac addresses and other important data for your device.
Sent from my GT-I9305 using Tapatalk 2
Great Just to be safe I have kept all my previous EFS backups and added the NV QCN file with them...I was mainly making sure that 250kb sounds correct yeh? it shouldnt be larger then this?
btemtd said:
Great Just to be safe I have kept all my previous EFS backups and added the NV QCN file with them...I was mainly making sure that 250kb sounds correct yeh? it shouldnt be larger then this?
Click to expand...
Click to collapse
Yes 250kb is correct because its just the bytes for the NV Items thats stored in the QCN file.
efs backup without root, now that's what i am talking about
great job :good:
Happy to ship my phone to you if you need one to play with.
lyriquidperfection said:
After some research I discovered that backing up the '/efs' folder using existing tools such as my EFS Pro application will not work with this particular device.
Most Samsung devices have a file in the '/efs' folder called 'nv_data.bin' and on closer inspection this file is not present on our devices.
This is because the I9305 has LTE which also means its fitted with a Qualcomm chip to control the modem. This also means that our device uses a Qualcomm RIL instead of the usual Samsung RIL so the NV area of the device including the EFS structure is laid out different.
As it happens our device is not much different from some US variants of the Galaxy S III except we have the Quad Core Exynos CPU in the I9305 where as some US variants are fitted with a Dual Core Snapdragon.
Setting up QPST with your PC:
Dial *#7284# on your phone to access PhoneUtil and select 'Qualcomm USB Settings' at the bottom. Now select 'RNDIS + DM + MODEM' and press 'OK' to return to the previous screen. Now press your 'Back' key to exit PhoneUtil. Your phone is now in DIAG Mode.
Download and Install: SAMSUNG_USB_Driver_for_Mobile_Phones_1590.exe - 23.06 MB if you don't already have Kies or a USB Driver installed.
Download and Install: QPST v2.7.378.zip - 14.68 MB
Now connect your phone to the PC with a USB cable and wait for Drivers to install.
Start the 'QPST Configuration' application and select the 'Ports' tab then press the 'Add New Port...' button. Select the COM Port that has 'USB/QC Diagnostic' next to it, change the Port Label if you like to 'Samsung GT-I9305' then press 'OK'. You should now see your phone listed in the 'Ports' tab and the 'State' should indicate 'Enabled'. You can now Close this application.
Backing Up IMEI / NV Data:
Start the 'Software Download' application and select the 'Backup' tab.
Press the 'Browse' button and choose a Save Location for your QCN File.
Press the 'Start' button and wait for it to finish. This will back up all your phones NV Items and save them to the QCN Backup File.
Restoring IMEI / NV Data:
Start the 'Software Download' application and select the 'Restore' tab.
Press the 'Browse' button and select your QCN Backup File.
Press the 'Start' button and wait for it to finish. This will restore all your phones NV Items from the QCN Backup File.
Your IMEI / NV Data should now be fully restored. Dial *#06# on your phones keypad to check your IMEI is restored.
Restore USB Settings after Backup / Restore:
Dial *#7284# on your phone to access PhoneUtil and select 'Qualcomm USB Settings' at the bottom. Now select 'MTP + ADB' and press 'OK' to return to the previous screen. Now press your 'Back' key to exit PhoneUtil. Your phone is now back to default USB operation.
If I have saved your bacon then please buy me a beer!
Click to expand...
Click to collapse
narcarsiss said:
Happy to ship my phone to you if you need one to play with.
Click to expand...
Click to collapse
Sounds good but don't you need it to get insurance replacement?
Sent from my GT-I9305 using Tapatalk 2
lyriquidperfection said:
Don't worry there is a workaround, just need to do more testing before I release it. It is basically a set of commands originally for AOSP Roms which I modified specifically for the I9305 to manually Enable or Disable the Diag Mode. So this Backup and Restore method will work for everybody.
Click to expand...
Click to collapse
So there's hope for me yet. thank god for that. will try to be patient as i wait for the workaround
Hi!
A. Rooting Vega Secret Note IM-A890S (4.2.2 mine) steps:
Connect your phone to the USB MTP connection. Install all drivers.
Get 890S-root.7z from pan.baidu.com/s/1lAoK2 (password: hael or simplified chinese translation)
Put the phone into fastboot mode shutdown, volume + button to live - and power, this time will enter a menu of options after 15 seconds
Use the volume keys to select FASTBOOT mode
Confirm FASTBOOT drivers installed, even on the data lines
Execte 890S-root.bat
Waiting for the phone to restart after ROOT. Success!
B. Vega Secret Note IM-A890S (4.2.2 mine) TWRP mode steps:
Connect your phone to the USB MTP connection. Install all drivers.
Get 890S-TWRP.7z from pan.baidu.com/s/1xfAsk (password: m7x3 or simplified chinese translation)
*890S TWRP Download: pan.baidu.com/s/1xfAsk extract Password: m7x3
890K TWRP Download: pan.baidu.com/s/1kUyrR extract Password: cvlg
Put the phone into fastboot mode shutdown, volume + button to live - and power, this time will enter a menu of options after 15 seconds
Use the volume keys to select FASTBOOT mode
Confirm FASTBOOT drivers installed, even on the data lines
Execte fastboot.bat
Waiting for the phone to into TWRP menu. Success!
i have problem installing stock rom..please help..mine is A890K...890S-root.7z<--where can i find A890K
1nS4n3 said:
Hi!
A. Rooting Vega Secret Note IM-A890S (4.2.2 mine) steps:
Connect your phone to the USB MTP connection. Install all drivers.
Get 890S-root.7z from pan.baidu.com/s/1lAoK2 (password: hael or simplified chinese translation)
Put the phone into fastboot mode shutdown, volume + button to live - and power, this time will enter a menu of options after 15 seconds
Use the volume keys to select FASTBOOT mode
Confirm FASTBOOT drivers installed, even on the data lines
Execte 890S-root.bat
Waiting for the phone to restart after ROOT. Success!
B. Vega Secret Note IM-A890S (4.2.2 mine) TWRP mode steps:
Connect your phone to the USB MTP connection. Install all drivers.
Get 890S-TWRP.7z from pan.baidu.com/s/1xfAsk (password: m7x3 or simplified chinese translation)
*890S TWRP Download: pan.baidu.com/s/1xfAsk extract Password: m7x3
890K TWRP Download: pan.baidu.com/s/1kUyrR extract Password: cvlg
Put the phone into fastboot mode shutdown, volume + button to live - and power, this time will enter a menu of options after 15 seconds
Use the volume keys to select FASTBOOT mode
Confirm FASTBOOT drivers installed, even on the data lines
Execte fastboot.bat
Waiting for the phone to into TWRP menu. Success!
Click to expand...
Click to collapse
890L-ROOT: http://pan.baidu.com/s/1zh4mS
890K-ROOT: http://pan.baidu.com/s/1qucxD
890S-ROOT: http://pan.baidu.com/s/1lAoK2
password: hael
I don't have any link to original rom.. Only custom on vietnam or chinese forums..
sonyue.com/bbs/thread-76577-1-1.html - use chrome to translate
4.4 kit kat released yesterday...
1nS4n3 said:
Hi!
A. Rooting Vega Secret Note IM-A890S (4.2.2 mine) steps:
Connect your phone to the USB MTP connection. Install all drivers.
Get 890S-root.7z from pan.baidu.com/s/1lAoK2 (password: hael or simplified chinese translation)
Put the phone into fastboot mode shutdown, volume + button to live - and power, this time will enter a menu of options after 15 seconds
Use the volume keys to select FASTBOOT mode
Confirm FASTBOOT drivers installed, even on the data lines
Execte 890S-root.bat
Waiting for the phone to restart after ROOT. Success!
B. Vega Secret Note IM-A890S (4.2.2 mine) TWRP mode steps:
Connect your phone to the USB MTP connection. Install all drivers.
Get 890S-TWRP.7z from pan.baidu.com/s/1xfAsk (password: m7x3 or simplified chinese translation)
*890S TWRP Download: pan.baidu.com/s/1xfAsk extract Password: m7x3
890K TWRP Download: pan.baidu.com/s/1kUyrR extract Password: cvlg
Put the phone into fastboot mode shutdown, volume + button to live - and power, this time will enter a menu of options after 15 seconds
Use the volume keys to select FASTBOOT mode
Confirm FASTBOOT drivers installed, even on the data lines
Execte fastboot.bat
Waiting for the phone to into TWRP menu. Success!
Click to expand...
Click to collapse
I can't Root, because 4.4 kit kat released yesterday... How do it?
ya...lost the root after 4.4 kitkat update
i googled and found this link :
http://koreandroids.blogspot.com/20...howComment=1402495334016#c6816248223349485572
worked for me..less in minute..
Install stock rom
chilskater said:
i have problem installing stock rom..please help..mine is A890K...890S-root.7z<--where can i find A890K
Click to expand...
Click to collapse
This is my tutorial How to install a stock rom fo vega pantech. This is my experience, i have installed the rom for many times. let try
Easily rooted a890K in 1 minute ... with kitkat rom 4.4
used program called towelroot ... 100 kb file from its website ...
have to click pi brown icon to download it
---------- Post added at 09:09 PM ---------- Previous post was at 08:53 PM ----------
Easily rooted a890K in 1 minute ... with kitkat rom 4.4
used program called towelroot ... 100 kb file from its website ...
have to click pi brown icon to download it
Please Is there anybody who can help me? My issue is this: I want to root my SG Trend Plus but I can´t install programs on my PC. I tried a lot of apps like Framaroot, z4root and vroot but this apps couldn´t root my phone. Please help me I am desperate.
Thank you for any help.
serious_man
serious_man said:
Please Is there anybody who can help me? My issue is this: I want to root my SG Trend Plus but I can´t install programs on my PC. I tried a lot of apps like Framaroot, z4root and vroot but this apps couldn´t root my phone. Please help me I am desperate.
Thank you for any help.
serious_man
Click to expand...
Click to collapse
- Install USB driver
- Connect your phone as MTP and copy on Phone memory the UPDATE-SuperSU-v1.34.zip file ( without unzip it)
- Remove your phone (Disconnect your device)
- Extract file recovery.tar.md5 from Recovery CWM in your desktop
- Turn off
- Press and hold Volume DOWN + Home + Power until you can read a Warning screen and press Volume UP to continue
- Connect your phone to pc and wait for driver installing...
- Open Odin 3.07 and the ID:COM should turn blue
- Untick Auto Reboot and F. Reset Time
- Click on PDA and select file recovery.tar.md5
- Press Start button
- When you read PASS! unplug the usb cable
- Press and hold Volume UP + Home + Power until screen turn off
- Release only Power button and you are on CWM Recovery...
- Select (use Volume up/down and select with Power button) install zip -> choose zip from internal sdcard-> 0/
- Select the Root zip and Yes - Install ..
- After all is done select reboot system now
TECNO & INFINIX FLASHING GUIDE
Tested phone list (Main page)
1.Tecno KD7
2. Infinix hot 9 play:
X680
X680B
X680F
3. Infinix Hot 9
X655C
4.Tecno KE7
5. Other Phone Work
*** Flash to fixt:****
Auto Restart On Off
Hanging While Device Running
Pin Lock
Pattern Lock
Face Look
Privacy Lock
Start Android Password
Auto Fastboot Mode
Auto Recovery Mode Unfortunately Android Has Stopped Virus Problem
Storage Space Running Out
Sp Tool Error S Not Enough Storage Space
White/Black LCD After Flash Other Firmware
Invalid IMEI Baseband Unknown
Dead After Flash Etc
# # Formate and Download erxta imei fixt tool ##
Tested phone : TECNO & INFINIX
** Driver & Flash tool download **
1. Download Driver:ChimeraInstaller.zip
File info :
a to z driver
2. Download Flash Tool:
Mtk bypass & flashing tool zip
File info :
1. Mtk Bypass tool
2.SP_Flash_Tool_v5.1924_Win
3.ModemMETA_v10.1816.0.01 (IMEI FIXt)
3. Your phone flash file Download: Main page
## Flashing possess
## driver install guid
Fast ChimeraInstaller tool install and open custom install -1, 2 & 6 no. driver install
pc antivirus off
Mtk bypass & flashing tool zip download & unzip
unzip folder open
mtk bypass tool folder open & libusb-win32-devel-filter-1.2.6.0 install . launch & open. install driver a filter open. after phone power off . after Volum up + Volume down + power button hold click then USB cable connected. top up mtk driver show . click and install
## flashing process :
Antivirus OFF
Mtk bypass too open & bypass button click.
Volum up + Volume down + power button hold click then USB cable connected.
Not unplug USB cable
So tool open & sClick on Scatter-loading by the right
[[ Mtk bypass tool to phone connected:
1. Volume up button hold click then USB cable connected.
2.Volume up + down button hold click then USB cable connected.
3.Volum up + Volume down + power button hold click then USB cable connected. ]]
4.Flashing guide:
Mtk bypass tool +sptool tutorial video
5.Flashing guide
Full format + IMEI fix video tutorial