I found my phone stuck on google screen. My phone is not rooted. I can get to fastboot mode, but when i select Recovery mode I go into google screen again. What do I need to do, is there a way to copy all my files from phone to pc so I dont lose them when I reset my phone.
Try to flash recovery(TWRP) from fastboot then flash any ROM.
BKVSTAR said:
I found my phone stuck on google screen. My phone is not rooted. I can get to fastboot mode, but when i select Recovery mode I go into google screen again. What do I need to do, is there a way to copy all my files from phone to pc so I dont lose them when I reset my phone.
Click to expand...
Click to collapse
Connect your phone to PC with USB
Type the following commands
Verify that the phone is recognized
Code:
fastboot devices
To Boot to TWRP
Code:
fastboot boot recovery.img
If you are in TWRP go to 1) wipe
2) Advanced Wipe
3) select dalvik cache & Cache
4) Wipe
5) Reboot
If that didnt work I would recommend to install it.
To Install TWRP
Code:
fastboot flash recovery recovery.img
To Reboot
Code:
fastboot reboot
Download TWRP from Here. Also any issues with ADB you will find help in the same thred
Cheers
Zaib
i try flash the custom rom via recovery mode. So i dont enable USB debuging.
When twrp load, i wipe all data. Stuck in bootloop.
- Cant flash the rom via twrp. There are not file on phone
- Cant flash the factory image because USB debugging off
anyone can help?
what should i do please?
mlafief said:
i try flash the custom rom via recovery mode. So i dont enable USB debuging.
When twrp load, i wipe all data. Stuck in bootloop.
- Cant flash the rom via twrp. There are not file on phone
- Cant flash the factory image because USB debugging off
anyone can help?
what should i do please?
Click to expand...
Click to collapse
Please, tell me. Where do you read that you have to enable usb debugging in android to flash factory images in bootloader mode?
Connect the phone to your PC.
Press and hold volume_down+power keys until the phone gets into bootloader mode.
Download 15 secs adb instller http://forum.xda-developers.com/showthread.php?t=2588979
Download stock rom for nexus 5 https://developers.google.com/android/nexus/images and extract it
Run flash-all.bat
bitdomo said:
Please, tell me. Where do you read that you have to enable usb debugging in android to flash factory images in bootloader mode?
Connect the phone to your PC.
Press and hold volume_down+power keys until the phone gets into bootloader mode.
Download 15 secs adb instller http://forum.xda-developers.com/showthread.php?t=2588979
Download stock rom for nexus 5 https://developers.google.com/android/nexus/images and extract it
Run flash-all.bat
Click to expand...
Click to collapse
Thanks for your advice. I did it.
the adb cmd terminate. It cant load the system.img
i try manually type :
fastboot flash system system.img [FAILED TOO]
Really thanks for your advice. Finally i can solve this problem, just now
I try to flash factory image via wugfresh
(using force flash image)
without "force" it will be failied too.
I have try it.
SOLVED
bitdomo said:
Please, tell me. Where do you read that you have to enable usb debugging in android to flash factory images in bootloader mode?
Connect the phone to your PC.
Press and hold volume_down+power keys until the phone gets into bootloader mode.
Download 15 secs adb instller http://forum.xda-developers.com/showthread.php?t=2588979
Download stock rom for nexus 5 https://developers.google.com/android/nexus/images and extract it
Run flash-all.bat
Click to expand...
Click to collapse
Thanks for your advice. I did it.
the adb cmd terminate. It cant load the system.img
i try manually type :
fastboot flash system system.img [FAILED TOO]
Really thanks for your advice. Finally i can solve this problem, just now
I try to flash factory image via wugfresh
(using force flash image)
without "force" it will be failied too.
I have try it.
I run for a problem to install custom recovery.
Running CO12s with bootloader unlocked. have installed on my windows 7 all necessary sdk tools and packages, on windows command i checked adb version and fastboot all is good.
Now after put device to fastboot mode trying flash TWRP, window command saying that write process ok but still no recovery installed, in developer options I did uncheck recovery update. now if I go to recovery (CO12 recovery) in recovery log I can see that recovery update mode is still "true" how i can turn this off, looks like is blocking access to install custom recovery or is any other solution??
Go to the FAQ:
http://forum.xda-developers.com/oneplus-one/help/faq-oneplus-one-frequently-questions-t2895136
Last question.
Transmitted via Bacon
thank you
Dble check command syntax & Use force recovery boot
djcody said:
I run for a problem to install custom recovery.
Running CO12s with bootloader unlocked. have installed on my windows 7 all necessary sdk tools and packages, on windows command i checked adb version and fastboot all is good.
Now after put device to fastboot mode trying flash TWRP, window command saying that write process ok but still no recovery installed, in developer options I did uncheck recovery update. now if I go to recovery (CO12 recovery) in recovery log I can see that recovery update mode is still "true" how i can turn this off, looks like is blocking access to install custom recovery or is any other solution??
Click to expand...
Click to collapse
Just had similiar issue, my solution provided by timmaaa:
Flash TWRP again & don't do a normal reboot. After flashing is complete disconnect usb while in fastboot mode, use power + volume down to boot directly into recovery.
Also during command process make sure to use code: fastboot flash recovery recovery.img then skip the fastboot reboot & follow timmaaa's instructions above. Worked for me.
Force reboot to recovery fixed problem
Hi all,
Well I love my phone, just love it! BUT having bought it from China, like many I am stuck with the Chinese Model and firmware. Huawei Australia have assisted in unlocking the bootloader, now I am ready to root the phone. BUT, I have not had any luck sourcing a root method for it. Can someone please PLEASE help.
I am desperate as it keeps booting me out of Google Play Services, rendering my Huawei watch useless (ironic huh)
Any help would be appreciated. Email me if you like [email protected]
Michael
flash twrp recovery and install root with it very easy way
A Big Thank You and....
rowihel2012 said:
flash twrp recovery and install root with it very easy way
Click to expand...
Click to collapse
That sounds to easy, only question, how do I do that? Is there an instruction manual or guidance anywhere?
I have flashed other phones in the past but this one is stumping me.
I have looked for some of these methods only to be completing surveys that inundate me with spam and phone calls, only to be left without the downloads that I needed. Did I mention how much I love my phone?
Thanks again
Michael
Managed to root my phone.. even when I have updated the EMUI to B018, but there was an issue.. I tell you below
Step I follow from Chinese Forum below...
Preparation step :
1. download the tools from
https://www.mediafire.com/?9drsdo2f6hn4j34
2. Extract the content to your local. Note there are two folders :
- Folder 1 is for the tool that contains the TWRP recovery.img and the adb/fastboot tool,
- Folder 2 is for the original recovery
3. Copy the SuperSU zip to your phone (either in internal or external memory of your phone)
Installation step :
Step 0, unlock your bootloader (search around on how to do it)
1. Since I am using mac, somehow I don't need to install any driver, but if you using windows, install all the driver yourself
2. Enable the developer mode in your phone, and after that enable the usb debugging
3. Turn off your phone, and boot to fastboot (in off mode, connect the phone with your PC then press Volume Up and Power Button together)
4. Since now your phone has been connected to the PC, go to that Tool folder in respective of your OS, then overwrite the recovery with TWRP with fastboot command (install custom recovery) *note : for mac just add "./" in every command
- check the whether its connected : fastboot devices
- install TWRP : fastboot flash recovery recovery.img
5. Restart your phone and boot to recovery
- restart : fastboot reboot
- after reboot, turn off your phone
- reboot to recovery : turn on your phone by holding Volume Down with Power button
- Now you are at TWRP
6. Install SuperSU (root)
- Install SuperSU zip that has already been copied to your phone using TWRP (use the Install mode)
7. Reboot the phone
- Use reboot function in twrp
8. Profit
Theoritically the above things works but I have some issues following the above :
- After step 4, after recovery being flashed with TWRP seems like my phone Boot Partition is being overwritten too
- So when I rebooted the phone, it boot to TWRP instead
- So I tried to re-flashed the recovery with the original EMUI rom recovery (go to the folder "2.P8Max_Official_Recovery(For_restoration)" to find the original recovery.img). Also note that in the this folder, the adb and fastboot is only for mac. The one for windows use it in the tools
- This is done by going to fastboot again, then do command : fastboot flash recovery recovery.img
- This time using the original recovery
- Now when I rebooted the phone, it goes to EMUI recovery, then I just clicked restart to system or something
- After this, everything fixed, and I have SuperSU install and phone rooted
You can follow the above, but do it at your own risk, I am not responsible if your phone brick hehehe..
Original chinese forum is here : http://cn.club.vmall.com/thread-4919441-1-1.html
Click to expand...
Click to collapse
1 min Search
michaeldanielbourke said:
That sounds to easy, only question, how do I do that? Is there an instruction manual or guidance anywhere?
I have flashed other phones in the past but this one is stumping me.
I have looked for some of these methods only to be completing surveys that inundate me with spam and phone calls, only to be left without the downloads that I needed. Did I mention how much I love my phone?
Thanks again
Michael
Click to expand...
Click to collapse
just flash this recovery with fastboot
https://dl.twrp.me/p8/twrp-2.8.7.1-p8.img
fastboot flash recovery twrp-2.8.7.1-p8.img
then enter the recovery with hold power+volume up
install this file with install zip from twrp
https://download.chainfire.eu/696/SuperSU/UPDATE-SuperSU-v2.46.zip?retrieve_file=1
now you have root
very easy
rowihel2012 said:
just flash this recovery with fastboot
https://dl.twrp.me/p8/twrp-2.8.7.1-p8.img
fastboot flash recovery twrp-2.8.7.1-p8.img
then enter the recovery with hold power+volume up
install this file with install zip from twrp
https://download.chainfire.eu/696/SuperSU/UPDATE-SuperSU-v2.46.zip?retrieve_file=1
now you have root
very easy
Click to expand...
Click to collapse
I am so so sorry and a little embarrassed to ask this.
1. I am using the And it sees my phone
2. I am not sure how to fastboot.
3. Do I install the file "install this file with install zip from twrp" onto my device? (p8 max)
Again, I thank you.
michaeldanielbourke said:
I am so so sorry and a little embarrassed to ask this.
1. I am using the And it sees my phone
2. I am not sure how to fastboot.
3. Do I install the file "install this file with install zip from twrp" onto my device? (p8 max)
Again, I thank you.
Click to expand...
Click to collapse
1-shut down the phone
2-connect the usb cable with holding volume down .now you will be in bootloader
3-open cmd command in windows
4-type (fastboot flash recovery recovery.img (you must before rename the recovery file to recovery.img)
5-now after flashing the recovery .hold power+volume up to enter recovery
6-then install the root zip file
7-reboot the phone
You are so so helpful.
rowihel2012 said:
1-shut down the phone
2-connect the usb cable with holding volume down .now you will be in bootloader
3-open cmd command in windows
4-type (fastboot flash recovery recovery.img (you must before rename the recovery file to recovery.img)
5-now after flashing the recovery .hold power+volume up to enter recovery
6-then install the root zip file
7-reboot the phone
Click to expand...
Click to collapse
I will try this when i get home. I am always confused by the process. I am to old for all of this
Michael
BTW you will get in a Bootloop if your dont know how to exit I would not root your phone!
Sadly, this does not work for me. I did everything you suggested and in the command window I get nothing
I know the risks ( I think)
Hirs_E_Fruit said:
BTW you will get in a Bootloop if your dont know how to exit I would not root your phone!
Click to expand...
Click to collapse
Thanks so much for your concern, I know. But I love the phone but need to make it more Android (Google) friendly as it has Chinese firmware which keeps ending any relationship I have with google play services thus rendering the phone useless (almost)
You have been so helpful
rowihel2012 said:
1-shut down the phone
2-connect the usb cable with holding volume down .now you will be in bootloader
3-open cmd command in windows
4-type (fastboot flash recovery recovery.img (you must before rename the recovery file to recovery.img)
5-now after flashing the recovery .hold power+volume up to enter recovery
6-then install the root zip file
7-reboot the phone
Click to expand...
Click to collapse
I did all you suggested and I could not get it to I renamed the file and as you can see I did a command entry and can see my device which is in faboot and rescue mode (phone unlocked) then I type the command you suggested fastboot flash recovery recovery.img and I get this message
I just do not know what I am doing here
Have u unlocked the bootloader?
BTW my method i posted works if u do it right!
michaeldanielbourke said:
I did all you suggested and I could not get it to I renamed the file and as you can see I did a command entry and can see my device which is in faboot and rescue mode (phone unlocked) then I type the command you suggested fastboot flash recovery recovery.img and I get this message
I just do not know what I am doing here
Click to expand...
Click to collapse
The recovery img file link did you downloaded it?
You must download it and but the recovery.img file in fastboot folder
Then rename it to recovery.img.
And open cmd orders from fastboot folder .
Just type
fastboot flash recovery recovery.img
You must download the recovery file into the same folder that you ran your command and in your case "p8 max root". Make sure that the recovery filename is recovery.img instead of some other names.
Sent from my HUAWEI P8max using Tapatalk
Can I just say you have all been so helpful, l am a newb who got cocky and killed my beautiful phone. Now i just get the Huawei logo and no software
What recovery are you on right now? The stock one or twrp?
Sent from my HUAWEI P8max using Tapatalk
Stock
Leechoonhwee said:
What recovery are you on right now? The stock one or twrp?
Sent from my HUAWEI P8max using Tapatalk
Click to expand...
Click to collapse
Hello,
I have twice but now I am stuck on the Huawei logo and powered by Android screen. I can boot into Stock Bootload but no longer TWRP
even though I have reflashed recovery twice. Just chinese language and the EMUI screen with the three options
I think it's time to unroot and flash a new system and do it like i posted, then it will work!
michaeldanielbourke said:
Hello,
I have twice but now I am stuck on the Huawei logo and powered by Android screen. I can boot into Stock Bootload but no longer TWRP
even though I have reflashed recovery twice. Just chinese language and the EMUI screen with the three options
Click to expand...
Click to collapse
Did you reflash recovery2 also?
I used a rooting guide from the website theandroidsoul.com/oneplus-6-root, in which i followed the second method. Upon installing the patched bootfile my phone got stuck in the fastboot mode. Is there some way to repair it ? Thank you for your help in advance.
Best regards
Max Knobelsdorf
Flash stock not image & try to boot it if not works
Flash blu twrp and flash full zip throught twrp
If you are near a PC, you can use this guide. Very easy to use. Needless to say, it will delete your data. Use Flash All option once you download and unzip the downloaded file.
https://forum.xda-developers.com/oneplus-6/how-to/rom-stock-fastboot-roms-oneplus-6-t3796665
Max Knobelsdorf said:
I used a rooting guide from the website theandroidsoul.com/oneplus-6-root, in which i followed the second method. Upon installing the patched bootfile my phone got stuck in the fastboot mode. Is there some way to repair it ? Thank you for your help in advance.
Best regards
Max Knobelsdorf
Click to expand...
Click to collapse
I was in a similar situation just like you before. I did some search in Google and download this stock rom : OS 9.0.2 PIE which included with a flash-all command file. Just unzip the downloaded file and run the batch command while your phone is in Bootloader mode. Wait for it to complete and reboot, then your OP6 will be in stock mode again.
After your OP6 successfully restored to normal stock rom, you can install TWRP and Magisk in the following steps :
1. Download Magisk 17.1.zip and copy to the OP6 internal storage.
2. Download the twrp image and zip file (installer) from blu_spark ( thread ) and
copy the twrp zip file (installer) into your OP6 internal storage.
3. Turn your OP6 in bootloader mode, and then perform the following command in your PC to boot the phone in TWRP mode:
fastboot boot twrp-3.2.3-x..xxxxxxx.img
4. When you get into the TWRP screen, click "INSTALL" and find the twrp installer zip file and install it.
5. After the twrp zip file is installed, exit the current page and back to the first page. Click "ReBoot" and then choose "Recovery" and your phone will boot into TWRP recovery mode again.
6. Click "INSTALL" and select "Magisk 17.1.zip" from internal storage to install. After this, you may choose to reboot your phone again.
Do not manually reboot your phone until all the steps are completed. In fact, the only "soft reboot" is in step 5 and 6 !
Hope the above information helps !:laugh: