Database Info

Nandroid Backup, HELP

Hello everyone,
I have succesfully rooted my Sprint Hero, I am even using a cache app that you have to be rooted to use so I KNOW I am rooted. The only problem is NO MATTER WHAT I try I can not successfully flash the recovery img. It shows as flashing ok but when I go to boot in recovery it either flashes the HTC sign real quick then dies or stays on the HTC screen and doesnt do anything. Ive literally been trying this for 2 days now! Ive rerooted 10 times, Ive tried as many different recovery imgs for CDMA that I could find and I STILL get the same result. I even switched sd cards!! Could there be a problem with my phone thats not allowing it to work? Someone please help this is driving me nuts! Im ready to return the phone and get a new one just to try it,LOL!!PPlease help??

What images have you tried?

Just ones Ive found around the internet. Most of them were recovery-RA-heroc-v1.2.3.img

How are you trying to install it?
Flashrec?
flash_image?

Anyone??? Please?????Im about to return it and try again Id hate to find out it was something simple cuz this Hero has been perfect except for this problem, which is pretty useless to have it rooted if I cant flash, And I wont be able to update if sprint has an update also correct??

packetlss said:
How are you trying to install it?
Flashrec?
flash_image?
Click to expand...
Click to collapse
I follow f directions online that I go into cmd and get to the root and type" flash_image recovery /sdcard/recovery-RA-heroc-v1.2.3.img, when I hit enter all that happens is it shows exactly what I typed AGAIN then just #
So it will look like this:
#flash_image recovery /sdcard/recovery-RA-heroc-v1.2.3.img
flash_image recovery /sdcard/recovery-RA-heroc-v1.2.3.img
#
Then when I type reboot recovery it just reboots and shuts off, so Ill pull the battery and try the hardware method power volume down and it does THE SAME thing or it will just stay stuck on the HTC screen.

Do it like that.
then then use the:
"reboot recovery" command on the # prompt. See if that helps.

packetlss said:
Do it like that.
then then use the:
"reboot recovery" command on the # prompt. See if that helps.
Click to expand...
Click to collapse
Ya I did that, same thing happened. ):

One last try.
Redownload the the image from this post: http://forum.xda-developers.com/showthread.php?t=581521
Download md5sum.exe from this site: http://www.etree.org/md5com.html
Save it in them in same folder as you have the adb command in.
Then from the command line run:
md5sum recovery-RA-heroc-v1.2.3.img
It should output something like this:
0bdcea0f2c734035ba960d76aba0fa6a *recovery-RA-heroc-v1.2.3.img (Don't forget to copy it to the sdcard again )
Bolded text is the checksum of the file, it should match perfectly or your image is damaged.
If the checksum is the same, try flashing it again.

ahh i see clearer now.....
yes as suggested in the last thread you posted in... do a sprint RUU and try agian... this will put you at a known good baseline.... follow steps exactly...
as a added measure to cancel the option of bad sd card, get an external micro sd card reader and format it in windows as fat32

johnsongrantr said:
ahh i see clearer now.....
yes as suggested in the last thread you posted in... do a sprint RUU and try agian... this will put you at a known good baseline.... follow steps exactly...
as a added measure to cancel the option of bad sd card, get an external micro sd card reader and format it in windows as fat32
Click to expand...
Click to collapse
I actually already formatted to fat32,lol. How do I flash RUU??? To start over?

packetlss said:
One last try.
Redownload the the image from this post: http://forum.xda-developers.com/showthread.php?t=581521
Download md5sum.exe from this site: http://www.etree.org/md5com.html
Save it in them in same folder as you have the adb command in.
Then from the command line run:
md5sum recovery-RA-heroc-v1.2.3.img
It should output something like this:
0bdcea0f2c734035ba960d76aba0fa6a *recovery-RA-heroc-v1.2.3.img (Don't forget to copy it to the sdcard again )
Bolded text is the checksum of the file, it should match perfectly or your image is damaged.
If the checksum is the same, try flashing it again.
Click to expand...
Click to collapse
Where do I input that? Once I get in root?
I did adb shell
$su
#md5sum recovery-RA-heroc-v1.2.3.img
it says md5sum not found

No, md5sum in run before you do the adb shell command (it's a normal PC program).

aaron130 said:
Where do I input that? Once I get in root?
I did adb shell
$su
#md5sum recovery-RA-heroc-v1.2.3.img
it says md5sum not found
Click to expand...
Click to collapse
windows command line not adb shell.... make sure you are in the directory in which you downloaded md5sum

obdcea0f2c734035ba960d76aba0fa6a *recovery-RA-heroc-v1.2.3.img
thats what happened Good??

That is the correct checksum.
Try and flash that one.

Nope Same DAM thing it gets stuck at htc or htc then quits and shuts off

I'm out of ideas then. Could be that it's broken, unless someone else has the same problem. (Haven't seen any of that though).

packetlss said:
I'm out of ideas then. Could be that it's broken, unless someone else has the same problem. (Haven't seen any of that though).
Click to expand...
Click to collapse
Thx Im flashing the RUU now. Thx for your help though I appreciate it alot!!

HowTo re-flash the recovery image after old 2.1 RUU

This guide was taken from AndroidCentral and I thought I would share it here because it's taken me 4 hours this morning to figure out why I was having so many problems trying to flash a recovery image when I know my phone was rooted and flashed in order to get 2.1 a month or so ago. I have been searching these forums and google and hope anyone else who has my issue finds this post.
1. Make sure you have the Android SDK installed.
2. Download flash_image.zip
3. Download recovery-RA-heroc-v1.5.2.img
4. Unzip the first file, and place both in your Android SDK/tools folder.
5. Make sure USB debugging is ON
6. Connect your phone to the PC
7. Open the command window and navigate to the Android-sdk/tools folder on your computer.
8. At the prompt enter the following, one line at a time followed by enter
Code:
adb shell
su
mount -o remount,rw -t yaffs2 /dev/block/mtdblock3 /system
exit
exit
adb push flash_image /system/bin
adb push recovery-RA-heroc-v1.5.2.img /sdcard
adb shell
chmod 0755 /system/bin/flash_image
reboot
9. Your phone will reboot. When it is finished, back at your command window, once again enter
Code:
adb shell
su
cd /sdcard
flash_image recovery recovery-RA-heroc-v1.5.2.img
reboot recovery
10. With any luck, you'll have the recovery image back and can load custom 2.1 based ROMS again.
Hope this helps. All credit goes to gbhil at Android Central.

You might want to change the title of the post. People might get confused thinking you found a way to downgrade the hboot and not how to flash the recovery image.

Can't get it to work.
I ran the RUU earlier.
Tried to root the old way.......didn't work.
Just tried this to get the recovery image back.
At the SU command it says: permission denied
Thanks,
Bubba.

bubbacs1 said:
Can't get it to work.
I ran the RUU earlier.
Tried to root the old way.......didn't work.
Just tried this to get the recovery image back.
At the SU command it says: permission denied
Thanks,
Bubba.
Click to expand...
Click to collapse
This won't work for the leak that was put out today. You lost root. This process requires root.

bubbacs1 said:
Can't get it to work.
I ran the RUU earlier.
Tried to root the old way.......didn't work.
Just tried this to get the recovery image back.
At the SU command it says: permission denied
Thanks,
Bubba.
Click to expand...
Click to collapse
If you used the new RUU that was leaked today you're screwed. The older 2.1 leaks were test ROMs that were already rooted so you could use the instructions above to flash the RECOVERY. Notice recovery in bold, not bootloader. Once hboot is updated there is no known way to downgrade so you could use an older RUU file.

This rom has no root. There is NO WAY to re-root after flashing the newest RUU. I'm sorry to say... you're ****ed.

HeroMeng said:
This rom has no root. There is NO WAY to re-root after flashing the newest RUU. I'm sorry to say... you're ****ed.
Click to expand...
Click to collapse
So they can't run an older ruu with 1.5?

HeroMeng said:
This rom has no root. There is NO WAY to re-root after flashing the newest RUU. I'm sorry to say... you're ****ed.
Click to expand...
Click to collapse
To clear that up, if you run the RUU you have no root. If you extract the ROM, set it up, and flash it, you will preserve root, just like damageless made for all of us. But, yeah, you are not gonna be able to get back from this one. at least until someone figures it out.

I changed the thread title to hopefully alleviate some confusion. I didn't realize there was a newer RUU released.
I flashed the Damageless Rom and it's running smoothly so far, but I'm still trying to figure out why wifi tethering isn't working out for me. :-(

celemew2 said:
I changed the thread title to hopefully alleviate some confusion. I didn't realize there was a newer RUU released.
I flashed the Damageless Rom and it's running smoothly so far, but I'm still trying to figure out why wifi tethering isn't working out for me. :-(
Click to expand...
Click to collapse
Did you get wifi tether version 1_60? That's the only version that ever worked for me.

Yeah, I have 1.60 installed on my phone right now, but when I try to start tethering, a SU Request black screen comes up and nothing happens until I get an error, "Activity SU Request (in application Superuser Permissions) is not responding."
I'm sure there's an answer somewhere, but lately I haven't been having luck searching for it.
Edit:
Thank you 98classic! All I had to do was enable USB Debugging. (I had it turned off cause I didn't like the warning up top when my phone was plugged into the computer)

"flash_image not found" what the f**k

need the binary? physically check its there with a root explorer
Sent from my broken Typewriter!!!

or do this download and set up the android SDK it itself includes the flash_image binary. after that u will need to open a command prompt on your computer u will have to change directory to platform tools
cd /path/to/platform-tools
after that u will get the chance to do
flash_image recovery /path/to/recovery.img
that will flash the recovery
now reboot into recovery
Typed from my broken Typewriter!!!

[Guide] How to gain root on 2.2 for Mac

*******UPDATED 8/31/10 *******
This rooting method was adapted from regaw_leinad's method and toastcfh's method. By following these steps you will successfully downgrade your phone back to android 2.1 in order to gain root.
I don't trust unrevoked as I have had problems with it in the past.

I am not responsible for any damages to your phone.
special thanks to:
regaw_leinad
Sebastian Krahmer
Toastcfh
amon_ra
FILES YOU WILL NEED:
copy and paste into browser
Code:
sdx-downloads.com/sdx/evo/troot/eng-PC36IMG.zip
evo4g.me/downloads//count.php?target=evo-root.zip
files.androidspin.com/downloads.php?dir=amon_ra/RECOVERY/&file=recovery-RA-evo-v1.8.0.img
developer.android.com/sdk/index.html
You will need the Android SDK in order to communicate between your computer and your phone. Download it (last link above) and follow the setup instructions that it comes with.
Unzip the contents of the evo-root.zip and put all the files from it into the tools folder located in the android sdk folder.
Rename the eng-PC36IMG.zip to PC36IMG.zip and then put it the tools folder located in the android sdk folder. DO NOT UNZIP IT!

******* PC36IMG.zip md5sum~ fe8aba99893c766b8c4fd0a2734e4738 *******
Move the recovery-RA-evo-v1.8.0.img into the android sdk folder as well.
Make sure usb debugging is enabled on your device. To do so go to Settings > Applications > Development > and make sure the check box is checked.
Plug your phone into the computer. Select "Charge Only" from the notifications bar.
Open up terminal and navigate your way into the android sdk folder.
Code:
cd /
cd asdk
Push all the files onto your phone.
Code:
tools/adb push /asdk/tools/flash_image /sdcard/
tools/adb push /asdk/tools/rageagainstthecage-arm5.bin /data/local/tmp/
tools/adb push /asdk/tools/mtd-eng.img /sdcard/
tools/adb push /asdk/tools/PC36IMG.zip /sdcard/
tools/adb push /asdk/tools/recovery-RA-evo-v1.8.0.img /sdcard/
Note that the PC36IMG.zip will take longer than the other files to transfer to the sdcard because it is a large file.

Now we will make rageagainstthecage.bin executable.
Code:
tools/adb shell
chmod 0755 /data/local/tmp/rageagainstthecage-arm5.bin
You should see this (below) after it has made the change.
Code:
$
Now to use the rooted shell.
Code:
cd /data/local/tmp
./rageagainstthecage-arm5.bin
You will now see some text on your terminal screen describing the exploit. 

Wait for the adb shell to finish the process. At this point it may or may not terminate the current shell session in terminal. If it does then it should look like this:
Code:
users-iMac:asdk user$
If it doesn't it will return to
Code:
$
in that case you need to exit the current session. To do so type
Code:
exit

Now we need initiate a new shell which should now have root permissions.
Enter the following:
Code:
tools/adb shell
and you will see you now have a
Code:
#
instead of
Code:
$
Now we need to flash the mdt-eng.img in order for it to let us install a custom recovery
Code:
adb shell
cat /sdcard/flash_image > /data/flash_image
chmod 755 /data/flash_image
/data/flash_image misc /sdcard/mtd-eng.img
That will flash your misc partition with Toast's mtd-eng.img


This should return you to
Code:
#
Now boot into hBoot
Code:
reboot bootloader
This will reboot your phone into hBoot. It will scan for the PC36IMG.img. When it asks yes or no, select yes.
It should then reflash your phone into the engineering build.
When it asks to reboot select yes.
You will need to flash custom recovery in order to be able to flash other custom roms or modifications. I use Amon_RA's recovery because it works great and has NEVER caused me any problems.
Now, open up terminal and get back into the android sdk folder
Code:
cd /
cd asdk
Since we have already pushed the recovery onto the sdcard we only need to flash the recovery onto the phone so that we can use it
Code:
adb shell
cat /sdcard/flash_image > /data/flash_image
chmod 755 /data/flash_image
/data/flash_image recovery /sdcard/recovery-RA-evo-v1.8.0.img
Now lets rename that PC36IMG.zip file again
Code:
mv /sdcard/PC36IMG.zip /sdcard/eng-PC36IMG.zip
that way your phone doesn't try to flash it when you go into recovery each time
And last but not least we need to boot into it to flash a custom rom
Code:
reboot recovery
Your phone should then reboot into Amon_RA's recovery and you may now head over to the dev forum to find your new favorite custom rom.

very nice! can anyone confirm this? my buddy wants me to root his 2.2 and i would like to try this.

To make life easier for some people add this to your post mate, and apply it yourself if you would like.
Here is how to add your sdk/tools directory to your .bash_profile file so you won't have to navigate to the folder each time.
Download this so you'll be able to see your hidden files http://www.mediafire.com/?diimft1ninn Run it, check "Show Hidden Files" then click Restart finder. Now, navigate to your home folder (/Users/UserName/) and see if there's a .bash_profile already there. If not, create with textedit.
Now add this to the file: export PATH=${PATH}:/Path/Of/Your/Sdk/Tools/Folder
Mine is /Users/bmxrider4444/Documents/Android/SDK/tools
Now do not save it as rich text. If yours is in rich text, click on "Format" in the menu bar, and click "make plain text". Now save it as .bash_profile and uncheck "if no extension is provided, use .txt".
Now you can go back to Ghost and uncheck "Show all hidden files" and restart finder again (special thanks to ajones7279 for these steps)
Enjoy!
Just as clarification as to what this does, it enables you to run adb commands and other commands without having to navigate to the /android/tools/ folder every time you want to run adb or whatever.

does this work?

seekis said:
At this point we need to push the recovery onto the sdcard
Code:
tools/adb push "location of recovery-RA-evo-v1.8.0.img" /sdcard/
Click to expand...
Click to collapse
This is great! Thanks for the guide - I am planning on rooting my Wife's EVO but have been waiting for an easier method than the other one posted. Question on the above where we write "location of recovery-ra-evo-v1.8.0.img". Is that the exact code, or should we be adding a directory or folder location into this line? I rooted my 2.1 EVO on my Mac a couple months ago and don't remember this step. Once again - very much appreciate the help.
One last question - would it make more sense to have a custom ROM already on your SD Card prior to rooting, so that you can flash it right after you flash AMON-RA for the first time? Probably doesn't matter but thought i'd ask.

^^ same question as above, plus one other n00b question - does this method unlock NAND?
[edit] I was not insinuating that randymac88 is a n00b; I, however, am

seekis said:
I don't trust unrevoked as I have had problems with it in the past.

I am not responsible for any damages to your phone.
Click to expand...
Click to collapse
Don't trust us with the unrevoked 3.x/unrevoked forever application combo that's worked for thousands of users without sideeffects on regaw's post?
You should note to everyone that your method will screw up their PRI, reverting it back to 1.34. By using unrevoked and unrevoked forever, you can keep 1.40.

randymac88 said:
This is great! Thanks for the guide - I am planning on rooting my Wife's EVO but have been waiting for an easier method than the other one posted. Question on the above where we write "location of recovery-ra-evo-v1.8.0.img". Is that the exact code, or should we be adding a directory or folder location into this line? I rooted my 2.1 EVO on my Mac a couple months ago and don't remember this step. Once again - very much appreciate the help.
One last question - would it make more sense to have a custom ROM already on your SD Card prior to rooting, so that you can flash it right after you flash AMON-RA for the first time? Probably doesn't matter but thought i'd ask.
Click to expand...
Click to collapse
Thats not the exact code no. I just put that as a place holder you are suppose to put in the location of where you have the recovery.img. For example, the exact command for me would be:
Code:
/Users/seekis/Downloads/recovery-ra-evo-v1.8.0.img
Don't trust us with the unrevoked 3.x/unrevoked forever application combo that's worked for thousands of users without sideeffects on regaw's post?
You should note to everyone that your method will screw up their PRI, reverting it back to 1.34. By using unrevoked and unrevoked forever, you can keep 1.40.
Click to expand...
Click to collapse
As far as using unrevoked, I stated that I, ME, MYSELF, has had issues with it. not that anybody else has. By all means go and use it if you would like. I will not. It is true that you will loose PRI 1.40, but seeing as how even after installing the OTA from HTC my phone still didn't update it to 1.40, I don't see the issue.

rsage said:
^^ same question as above, plus one other n00b question - does this method unlock NAND?
[edit] I was not insinuating that randymac88 is a n00b; I, however, am
Click to expand...
Click to collapse
i believe it does unlock nand seeing as how i adapted it from toasts method

Hey Seekis - question, I'm stuck here. I keep getting "permission denied", or "operation not permitted" when trying to make the exploit executable at this step:
chmod 0755 /data/local/tmp/rageagainstthecage-arm5.bin
Am I missing something? I've tried a million times and can't seem to get past this. I've successfully pushed all the files onto the sdcard.
I've also have had some trouble finding the exact root path to these files. I've been able to navigate, but I would think a lot of users would have some trouble.
Regardless, many thanks for getting this posted...
EDIT: I pushed the rageagainstthecage file to the sdcard by mistake. Will try again tomorrow.

ok i got rid of that step by moving the file into the android sdk and pushing it with all the other files

Okay now I appear to be in big trouble as I've just messed up my wife's phone, and its probably going to be unusable for a while until I get this figured out (assuming I do!).
I got through most of the process. I flashed the PC36IMG.zip file; however when it asked to reboot, it just dumped me back into the bootloader. Whenever I say reboot, it just takes me back to the bootloader. Pull the battery, same thing - bootloader. Yikes.
I don't know how to get to the next step because I can't get into a booted rom in order to flash the amon-ra recovery. Am I totally effed? Can anyone help me here?
EDIT: Okay reflashed the PC36IMG.zip file, and it rebooted into the stock ROM. Onward! Phew!!

The wife's EVO is now fully rooted running Baked Snack 1.5 w/Netarchy's kernel. Touch and go there for a minute, but it all worked out. No 1.40 PRI, but I don't really care about that right now.
Woot! Thanks Seekis!!

do u have to push the pc36img with adb every time or will drag and drop work or copy and paste work?

FoxHound630 said:
do u have to push the pc36img with adb every time or will drag and drop work or copy and paste work?
Click to expand...
Click to collapse
You can mount the card on your system and copy paste it over as well, yes.

randymac88 said:
Okay now I appear to be in big trouble as I've just messed up my wife's phone, and its probably going to be unusable for a while until I get this figured out (assuming I do!).
I got through most of the process. I flashed the PC36IMG.zip file; however when it asked to reboot, it just dumped me back into the bootloader. Whenever I say reboot, it just takes me back to the bootloader. Pull the battery, same thing - bootloader. Yikes.
I don't know how to get to the next step because I can't get into a booted rom in order to flash the amon-ra recovery. Am I totally effed? Can anyone help me here?
EDIT: Okay reflashed the PC36IMG.zip file, and it rebooted into the stock ROM. Onward! Phew!!
Click to expand...
Click to collapse
Had the same issue. When i first booked into the bootloader i had to select recovery then flash PC36IMG.zip. Then boot loop. Then i went back into the bootloader and it automagically read in the PC36IMG.zip and flashed it, then i got stock 2.1 root. Just a few minutes of "oh crap"

I'm stuck. I got as far as flashing PC36IMG.zip, which was successful, as my phone now runs 2.1, but it doesn't appear I'm rooted. When I go back into the adb shell, I'm getting the $ prompt, and running
Code:
cat /sdcard/flash_image > /data/flash_image
gives me a permission denied error. Help!

atom_jack said:
I'm stuck. I got as far as flashing PC36IMG.zip, which was successful, as my phone now runs 2.1, but it doesn't appear I'm rooted. When I go back into the adb shell, I'm getting the $ prompt, and running
Code:
cat /sdcard/flash_image > /data/flash_image
gives me a permission denied error. Help!
Click to expand...
Click to collapse
i dont know what to tell you other than try again. this happened to me the first time through as well. i dont know why. i just started from the top and it worked the second time through.

seekis said:
i dont know what to tell you other than try again.
Click to expand...
Click to collapse
So after you flash PC36IMG.zip you should automatically get a root (#) prompt when going into the shell? ie, I'll have rooted 2.1 yes?
seekis said:
this happened to me the first time through as well. i dont know why. i just started from the top and it worked the second time through.
Click to expand...
Click to collapse
Aha. Ok, I will keep trying til it gives me a root shell, I guess. I also tried unrevoked3 but that didn't seem to work.

Success!! So, I stupidly assumed that all PC36IMG.zip's were the same, and was using the one from the original 2.2 PC thread. Once I got the correct one, voila!
You might want to post the md5 of the one you are using, so there's no confusion for others. Also, you missed a tiny step when you first start up hboot - you have to select fastboot for it to start scanning for PC36IMG.zip.
Thanks!

[Q]How to install Flash ClockworkMod Recovery on M701 (Apad)?

Hi all!
I finally managed to ROOT an aPad M701 using z4Root.apk
Now I want to make an image of my entire ROM tablet, I've heard that under the ROM manager app is a tool called "Flash ClockworkMod Recovery" that has to be installed in order to make a full ROM backup.
The problem is that everytime I try to install it a screen pops out telling me to choose from the list my model of phone (I'm on an aPad tablet), since I'm not on a phone, I'm unable to continue with the process!
Any method or workaround for installing Flash ClockworkMod Recovery on Haipads/aPads M701?
Thanks in advance for the help.

Custom Recovery Image
On Team Telechips website there is a custom Clockwork recovery image toward the bottom of the page.
Use the .bat file they include in their ZIP file or push the .img file to /nand and flash. You will then be able to back up everything with the custom m701 clockwork application.
If the .bat file doesn't work for you, try opening it up as text and use the commands as a guide to push via adb.

Thanks a lot for the reply Clookeno but I dont know where to start with this, do you know any step by step guide I can use to achieve this?
Again thanks for the info.

Adb push issues
Clookeno said:
On Team Telechips website there is a custom Clockwork recovery image toward the bottom of the page.
Use the .bat file they include in their ZIP file or push the .img file to /nand and flash. You will then be able to back up everything with the custom m701 clockwork application.
If the .bat file doesn't work for you, try opening it up as text and use the commands as a guide to push via adb.
Click to expand...
Click to collapse
I'm trying this and when using adb push to /nand I'm getting back "failed to copy 'recovery.m701.img' to '/nand/recovery.m701.img': Read-only file system"
I'm currently running Haipads 2.2 version and I was looking at testing out CM6 version, but can't seem to get the img file over.
And Ideas?

read only file
adb shell mount -o remount,rw /dev/block/mtdblock3 /system

The /nand folder needs to be read-writeable....since you use z4root go into temporary root and the push the file into /nand folder

Locobox said:
Thanks a lot for the reply Clookeno but I dont know where to start with this, do you know any step by step guide I can use to achieve this?
Again thanks for the info.
Click to expand...
Click to collapse
Locobox, there likely isn't a step-by-step guide for the procedure because it has a .bat file which is basically a executable file in windows that runs a set of commands in the DOS prompt for you. Basically you just double click the install_recovery.bat file and it puts the ADB commands in for you to push the recovery image to your tablet.
If you right click the .bat file and click edit you will see the following ADB commands:
adb push recovery.m701.img /nand/recovery.m701.img
adb shell sync
adb shell flash_image recovery /nand/recovery.m701.img
adb shell sync
adb shell reboot recovery
If you are familiar with ADB you can also copy the .img file to your sd card and flash it from there.
i recommend you have root access and the ADB utility.
Sorry it took so long to reply, work has been killing me lately....

poole699 said:
I'm trying this and when using adb push to /nand I'm getting back "failed to copy 'recovery.m701.img' to '/nand/recovery.m701.img': Read-only file system"
I'm currently running Haipads 2.2 version and I was looking at testing out CM6 version, but can't seem to get the img file over.
And Ideas?
Click to expand...
Click to collapse
poole699,
I have tried everything you can think of to put CM6 on the 2.2 Haipad firmware (which is really a modded 2.1) and had no luck. Either the system directories are all messed up or they locked the ability to edit it somehow. If you figure it out let me know because i have wanted to try it for a while.
I have a working team telechips 2.2 with market and correct orientation settings but it took ALOT of trial and error. If you go that route make sure you back-up your pointercal file because if you do not you will likely have to go back to an official release, save it, and try the telechips mod again...
Good luck

Clookeno said:
Locobox, there likely isn't a step-by-step guide for the procedure because it has a .bat file which is basically a executable file in windows that runs a set of commands in the DOS prompt for you. Basically you just double click the install_recovery.bat file and it puts the ADB commands in for you to push the recovery image to your tablet.
If you right click the .bat file and click edit you will see the following ADB commands:
adb push recovery.m701.img /nand/recovery.m701.img
adb shell sync
adb shell flash_image recovery /nand/recovery.m701.img
adb shell sync
adb shell reboot recovery
If you are familiar with ADB you can also copy the .img file to your sd card and flash it from there.
i recommend you have root access and the ADB utility.
Sorry it took so long to reply, work has been killing me lately....
Click to expand...
Click to collapse
Thanks again for the info, but I'm not familiar with ADB. The procedure seems difficult for me hope this thread helps a lot of other users!
Again thanks for the response.

M701 Screen Flip
Hi guys, I've got a bit of a problem with my M701 tablet. I did a factory reset the other day and now the digitizer is inverted. The screen works fine but when I touch the top it senses the bottom & left = right.
This is a complete pain in the arse.
I plugged the unit into a keyboard via the usb port as a workaround until I could get into it to try to resolve the issue but I'm now stuck in a loop at the sign in to google bit. Every time I sign in it takes me back to the sign in page.
This is also a complete pain in the arse.
It doesn't have clockworkmod installed and so when I tried to install update.zip as per the above post, it comes up with 'E:Failed to verify whole-file signature' error message and aborts.
Again, a complete... you get the picture...
So, I'm slightly frustrated with it to say the least and was wondering if any of you intelligent types could either point me in a suitable direction that doesn't involve the bin. Or a window...
Many thanks in advance.

Help
Locobox said:
Hi all!
I finally managed to ROOT an aPad M701 using z4Root.apk
Now I want to make an image of my entire ROM tablet, I've heard that under the ROM manager app is a tool called "Flash ClockworkMod Recovery" that has to be installed in order to make a full ROM backup.
The problem is that everytime I try to install it a screen pops out telling me to choose from the list my model of phone (I'm on an aPad tablet), since I'm not on a phone, I'm unable to continue with the process!
Any method or workaround for installing Flash ClockworkMod Recovery on Haipads/aPads M701?
Thanks in advance for the help.
Click to expand...
Click to collapse
How were you able to root your apad with Z4? I was not able to find the setting to activate the USB Debugging?
Thanks,
~b

is there development in the forums for the Apad line? im looking at getting a m702 the next 1 up, well i want to find a tablet rom maybe alowing me to run gingerbread on it,
any help?

ljohnso16 said:
is there development in the forums for the Apad line? im looking at getting a m702 the next 1 up, well i want to find a tablet rom maybe alowing me to run gingerbread on it,
any help?
Click to expand...
Click to collapse
I'm not sure if this of help to you, but I have a M701 2Gb (probable fake version), I've messed around with the basics on my exploring Android type thread:
http://forum.xda-developers.com/showthread.php?t=1004824
I've put recovery on both 2.1 and 2.3 roms (need different versions). Any other q's then let me know, I don't know much yet but learning the best i can.
A very useful place for info on the M701 is here:
http://www.androidtablets.net/forum/groups/11-haipad-m701-m701-r.html

Root vtab1008 honeycomb (masterkey)

!!!UPDATE!!!!
Sorry I lost my root files. I still have the base code i used to make them. I am trying to work with @saurik to get vtab1008 working with the cydia impactor so that this process will be eaiser. sorry about not keeping up here.
The linux root is still working.
!!!!!!!!!!!!!!!!!!!!!!!!!!!
I was able to get the VTAB1008 HONEYCOMB ROOTED. This device is no longer doomed to a rootless existence.
ROOT AT YOUR OWN RISK! I AM IN NO WAY RESPONSIBLE IF THIS BREAKS SOMETHING.
----WINDOWS ROOT (This worked for me)----
!!Some people have had problems with 64 bit systems.!!
https://dl.dropboxusercontent.com/u/...nys Root.zip (restored by grnsl2)
Download the latest java sdk http://www.oracle.com/technetwork/java/javase/downloads/jdk7-downloads-1880260.html
(if it installs anywhere but C:\Program Files\Java\jdk1.7.0_45\bin\jdb change the path in the runme.bat)
Setup ADB
Follow instructions at http://www.google.com/url?sa=t&rct=...5IAx2Xg-VjGm5pQ&bvm=bv.57155469,d.cGU&cad=rja
for the inf file use the one in the skinnys root,zip
!!!THIS STEP IS VERY IMPORTANT ^ IF YOU ARE HAVING ISSUES YOU MAY HAVE NOT COMPLETED THIS STEP!!!
Run Exploit
open command prompt (windows 7 type cmd in start menu and press enter)
CD to location you extracted the zip
example: cd "C:\Users\skinny\Downloads\Skinnys Root"
type "runme.bat"
You will see a ton of data on the screen after a minute your tablet will show android.app.Activity
Paste the following into the shell (the prompt should have changed to look like >)
Code:
stop in android.os.MessageQueue.next()
Touch your tablets screen (the prompt should change to <1> main [1]
Paste the following into the shell
Code:
print java.lang.Runtime.getRuntime().exec("/system/bin/sh /data/local/tmp/rootme.sh")
Wait until you see something like Java.lang.Runtime.getRuntime().exec("/system/bin/sh /data/local/tmp/rootme.sh") = "Process[id=1265]"
Code:
exit
Press enter to reboot
----LINUX ROOT----
Get Linux on a live usb stick to run exploit (skip if you have a linux system)
Download 32bit kubuntu from http://www.kubuntu.org/getkubuntu/download
Get a thumbdrive at least 2 gig
Launch unetbootin
Select bubble next to diskimage
Choose ISO
Click on ...
Browse to the kubntu iso downloaded at A.
Set drive to your usb drive letter.
The next step will erase your thumb drive!!!!!
Click OK
Process will complete and ask you to reboot (reboot)
Select the thumbdrive at startup (i don't know what type of computer you are using but most systems you can press f8, f11, f12 or f2 tp get the boot prompt)
(For more information read this guide http://sourceforge.net/apps/trac/unetbootin/wiki/guide)
Select Default at the kubuntu boot prompt
Select Try Ubuntu
Get kubuntu linux setup for the exploit (skip if you already have android tools on linux)
Press alt+f2
Type "konsole" and press enter
Paste the following commands in.
Code:
sudo chown kubuntu:kubuntu /opt
mkdir /opt/exploit/
cd /opt/
wget http://dl.google.com/android/adt/adt-bundle-linux-x86-20131030.zip -O adt.zip
unzip adt.zip
mv adt-bundle-linux-x86-20131030/ adt/
echo 'export PATH=$PATH:/opt/adt/sdk/build-tools/android-4.4:/opt/adt/sdk/platform-tools' >> ~/.bashrc
source ~/.bashrc
sudo su -c "echo 'deb http://ppa.launchpad.net/webupd8team/java/ubuntu saucy main
deb-src http://ppa.launchpad.net/webupd8team/java/ubuntu saucy main' > /etc/apt/sources.list.d/oracle-java.list"
sudo apt-key adv --keyserver keyserver.ubuntu.com --recv-keys EEA14886
sudo apt-get update
sudo apt-get -y install git
cd /opt/exploit/
sudo apt-get -y install oracle-java7-installer
Accept Java license agreement to install java 7
Run Exploit
Plug in your tablet
Enable debugging mode (Settings -> Applications -> Development -> USB debugging)
Paste the following commands in your linux console (if following steps use the konsole that you have been running commands in).
If you are not using /opt/adb/sdk for your android devlopemnt use your dir on the 3rd step
Code:
git clone [url]https://github.com/raymondhardy/mkbreak.git[/url]
wget 'http://goo.gl/Ox8qDx' -O Superuser-3.1.3-arm-signed.zip #thanks to @Munk0
unzip Superuser-3.1.3-arm-signed.zip
cp system/bin/su mkbreak/
cp system/app/Superuser.apk mkbreak/
cd mkbreak
./doit.sh /opt/adt/sdk
You will see a ton of data on the screen after a minute your tablet will show android.app.Activity
Paste the following into the shell (the prompt should have changed to look like >)
Code:
stop in android.os.MessageQueue.next()
Touch your tablets screen (the prompt should change to <1> main [1]
Paste the following into the shell
Code:
print java.lang.Runtime.getRuntime().exec("/system/bin/sh /data/local/tmp/rootme.sh")
Wait until you see something like Java.lang.Runtime.getRuntime().exec("/system/bin/sh /data/local/tmp/rootme.sh") = "Process[id=1265]"
Code:
exit
Press enter to reboot
If you get stuck at any part of this process please post a reply with information about the problem you are having.
PROOF OF ROOT
Thanks and credit goes out to.
robertmillan
Jay Freeman (saurik)
PoC by Pau Oliva
Vinogans for leading me to masterkey exploit

NICE!!! Any instruction changes for windows?

gnoober said:
NICE!!! Any instruction changes for windows?
Click to expand...
Click to collapse
Not yet i suspect someone will make a better root later on as of now this is linux only. This exploit uses of linux commands for injecting code into a system application to gain root.

I will be updating the first post later on with steps and screenshots on how to do this on a ubuntu live instance (I may even throw in a shell script so you run it and then wait forever while it does the setup and starts the root. I will see what i can do.)

skinnyquiver said:
I will be updating the first post later on with steps and screenshots on how to do this on a ubuntu live instance (I may even throw in a shell script so you run it and then wait forever while it does the setup and starts the root. I will see what i can do.)
Click to expand...
Click to collapse
Awesome! Nicely done! Guess I'm gonna have to dig out the VTab and give this a shot. Thinking it's gonna need a charge!
Sent from my LG Optimus G using Tapatalk

I updated the steps and re-rooted my tablet with them several times to verify that they worked. Let me know if they work for you
dandrumheller said:
Awesome! Nicely done! Guess I'm gonna have to dig out the VTab and give this a shot. Thinking it's gonna need a charge!
Sent from my LG Optimus G using Tapatalk
Click to expand...
Click to collapse

gnoober said:
NICE!!! Any instruction changes for windows?
Click to expand...
Click to collapse
Got this working on windows (does not look very pretty but it works.

Hey skinnyquiver, that is awesome... my vtab has already gained like 5mm of pure dust. However, i gonna digg it out these days, install stock recovery to update it to honeycomb finally and then reroot this thing...
Btw, the paragraph above windows instructions still says linux only...
_________________________
tapatalked from GalaxyS3

FadeFx said:
Hey skinnyquiver, that is awesome... my vtab has already gained like 5mm of pure dust. However, i gonna digg it out these days, install stock recovery to update it to honeycomb finally and then reroot this thing...
Btw, the paragraph above windows instructions still says linux only...
_________________________
tapatalked from GalaxyS3
Click to expand...
Click to collapse
try to root it with master key exploit I am talking about the the version .57 .. then before updating to honeycomb grab the update.zip the one that belong to honey comb ... try to do this

vinogans said:
try to root it with master key exploit I am talking about the the version .57 .. then before updating to honeycomb grab the update.zip the one that belong to honey comb ... try to do this
Click to expand...
Click to collapse
i am currently charging... my device is rooted with frozen updater, firmware is currently 1.9.56 so i am not sure what is the update path, will i get the honeycomb firmware immediately or do i have to update to .57 first?
_________________________
tapatalked from GalaxyS3

FadeFx said:
i am currently charging... my device is rooted with frozen updater, firmware is currently 1.9.56 so i am not sure what is the update path, will i get the honeycomb firmware immediately or do i have to update to .57 first?
_________________________
tapatalked from GalaxyS3
Click to expand...
Click to collapse
u will have to update to .57 then u will get honeycomb update ..

vinogans said:
u will have to update to .57 then u will get honeycomb update ..
Click to expand...
Click to collapse
Thats bad, but i will give that a try. However, i cant promise that i will succeede and it will take me some days as i am quite busy with my real life as well
_________________________
tapatalked from GalaxyS3

So it's certainly exciting to see root for this guy after owning it now for a couple of years.
I believe with root we'll be able to get rid of some bloat and stuff unneeded but I'm assuming we'll stay on Honeycomb.
I'd like to figure out what the real upside to this is.
Sent from my DROID RAZR HD using Tapatalk

grnsl2 said:
So it's certainly exciting to see root for this guy after owning it now for a couple of years.
I believe with root we'll be able to get rid of some bloat and stuff unneeded but I'm assuming we'll stay on Honeycomb.
I'd like to figure out what the real upside to this is.
Sent from my DROID RAZR HD using Tapatalk
Click to expand...
Click to collapse
You should be able to use this root with the 5.7 before going to honeycomb. This way you can have gingerbead rooted if your device came with the 5.7 update. I would like to get this running cm9 or cm10. The first problem with this is it will require a new kernal. I am going to be moving this weekend so it will be a while until I can get a build env to work on this. I plan on using this tablet to learn all about android rom making. Hope I don't brick it.

As Vizio has not released the kernel source I think we may want to look at using the xo-3 kernel.

Everything seems like it works, everything says 'success', but root checker is showing no root. I had force closes on the System UI before rebooting it a second time.
I tried it straight from a factory reset, just to be sure, same issue.I'm on 3.2.1 on this Vtab.
Not sure what is missing? Anything I should check?

unqualified said:
Everything seems like it works, everything says 'success', but root checker is showing no root. I had force closes on the System UI before rebooting it a second time.
I tried it straight from a factory reset, just to be sure, same issue.I'm on 3.2.1 on this Vtab.
Not sure what is missing? Anything I should check?
Click to expand...
Click to collapse
What os do u use? Check if adb is working
_________________________
tapatalked from GalaxyS3

unqualified said:
Everything seems like it works, everything says 'success', but root checker is showing no root. I had force closes on the System UI before rebooting it a second time.
I tried it straight from a factory reset, just to be sure, same issue.I'm on 3.2.1 on this Vtab.
Not sure what is missing? Anything I should check?
Click to expand...
Click to collapse
I had this problem also in the first time .. try to check if java is installed and working well .. try to check if ADB driver is identified on ur pc ..
I am thinking it is just a java problem .. did u type the commands in the shell " just wondering " this will not work if u didnt type the commands and follow the steps ..

vinogans said:
I had this problem also in the first time .. try to check if java is installed and working well .. try to check if ADB driver is identified on ur pc ..
I am thinking it is just a java problem .. did u type the commands in the shell " just wondering " this will not work if u didnt type the commands and follow the steps ..
Click to expand...
Click to collapse
Thanks for all the suggestions! I was surprised so many people responded on such a forgotten tablet.
I did enter the two commands in the shell (copied and pasted the exact commands) at the appropriate times, and they appeared to work.
I wasn't able to do the ADB setup exactly per the link on the OP, because my computer already recognizes the VTAB1008 under debugging mode, and runs ADB. If I try to uninstall and manually install the generic driver from the Skinny Root zip, it re-discovers and says the current driver is 'more current'. However, since 'adb devices' recognizes the vtab, and all the commands appear to be working, I should be good to go with ADB, right? Or is the generic driver from the Skinny Root zip file a critical component?
I also uninstalled Java SDK for x86 and re-installed for 64 just in case, but that didn't fix it.
Also tried disabling antivirus, no luck...
Is there a basic way to check whether java is working correctly? Or to read the java output as it is running the commands? Maybe something would show up there.
Thanks again

Do u see superuser app installed? If so, what does it output when you open it?
_________________________
tapatalked from GalaxyS3