Database Info

display problem, screen garbled and/or scrolling non stop and/or blank

hi,
newbie in this forum and newbie in using a phone running an operating system. please help.
bought the phone in late June 2008, received it before the month ended, installed TomTom Navigator 6 on it and tested the various hotspot around my place, happy with it and stashed the phone on a safe place in the closet as T-Mobile don't have 3G service. then last week I decided to get an ATT plan (can't stand the iPhone 3G ad) so I can tasted the blazing HSDPA speed.
last week on Wednesday I use the phone as a GPS to get me to a hotel I'm staying near the White House. it got me there no problem. then the next day, the horror started. I was trying to plot a walking course to many of the nearby "stuff to see" and the phone just sits there saying that it can't get a valid GPS signal. then I tried to go to Google Maps using IE. the screen started scrolling, literally scrolling, then when it stopped, whatever usually on the top ended up in the middle of the screen, the bottom ended up on the top, and the screen was "split" in 2 with the edges staying dead center. so I thought, ah, this phone is just too tired, it ran out of memory (as all windows always does ignoring how much ram you put, at least in my experience), so I press the power button to let it do the light sleep. when I turned it back on, the phone seems to work the problem out and I tested it by going online.... guess what, the screen started scrolling again and even adding "I can play dead". the screen is not responding to anything (touch, tap, swipe, rotating the scroll wheel, pressing the buttons) beside the power button that seemed to turn the display off. when I turned it back on, the screen just gives off some light on the sides, but that's it, the screen is blank. taking out the battery doesn't even fix the "blank" screen thing. the device seemed to work out the problem after I left it unused for about 2-4 hours, but then it started again when I tried to do anything (all I ever do with my Touch Cruise is going online via wifi and/or att data plan, plus using the phone as GPS).
even after resetting the phone to a factory default doesn't help (did it this morning via a representative guidance). so I'm stumped. within a week, the phone basically broke, then how about another year? will it become bits and dust?
anyone can give me advise? one representative I talked to said that I can get a replacement for the phone but the last one I talked to said that HTC only have an option of repairing the phone but not replacing one.
thank you to all who reads.

Really weird.
Try to get replacement, if not possible, get it repaired.
If hard reset / factory default did not help... It does sound to me like malfunctioning device.
On the other hand... is it provider locked device or unlocked one?
I guess it's unlocked, but I'm bit confused since you mention both T-Mo and AT&T...
I do hope that there's original ROM on it...

For what it's worth, my XDA Orbit II has just developed the exact same fault. I tries soft and hard resets, re-flashed with 6.5 rom and then a 6.1 version, all to no avail. It goes through the boot sequence and asks for a screen calibration - if you ignore the scrolling screen and tap in the right places, the calibration is accepted (which makes me think it's not the digitizer. The screen itself seems to be fine - no missing pixels, cracks, - it displays everything it should only with a constant vertical scroll. If it had a vertical hold knob, I could fix the problem.
Really weird, it was working fine this morning and after sitting in its cradle for a couple of hours it is now like this.
Any ideas as to how I might cure the problem would be gratefully received.

Att Fuze black screen need help please! Not a bad flash issue.

Hi all,
I am at my wits end on this problem if anyone can offer any adivice it would be greatly appreciated. So let me give a recap of what has occured thus far. The water damage tag for some reason turn pink thus i am unable to get warranty exchange. I am pretty certain that the phone has never been expose to any water of anything of that sort, but i do live in houston, tx so might be humidity or what not that cause the tag to turn. Anyways.
1. This all started after i flashed RRE 5.2 RC3. Initially after a successful flash everything seem normal and fine. Then next morning i woke up to a frozen screen with many verticial lines running up and down the screen was almost unreadable. Initially i thought it was a bad flash or just random lock up. I did a hard reset and tried to enter the bootloader. Black screen, it does seem like the backlight is coming up but nothing on the screen. I can hear the phone power on and boot successfully into windows. Activesync connects i can browse the contents of the phone.
2. After flashing to stock att rom and stock htc roms same symptoms. So at this point i am thinking crap bad LCD screen. so I ordered both the digitizer and lcd screen for good measure. I replaced them hoping that a bad LCD was all. replaced both screens and i powered on the phone. same problem. black screen. The phone still powers on and boots into windows. Activesync still connects and i cna still reflash the phone.
3. I work extensively and do both desktop pc and notebook repair. I am not new to dealing with small electronic repairs. but at this juncture i am unable to identify the cause of hte malfunction. i am hoping maybe some of the gurus here might be able to shine some light on the subject.
Thanks in advance for any help.

I would have followed the same approach; your description makes it sound like it might be some kind of backlighting issue at first read. I'm inclined to think it might be a cold connection (bad connector) on the main board.
Silly question, what happens if you power up the phone with the keyboard exposed?
*EDIT* Not sure if you have been here yet: http://www.mikechannon.net/
Cheers,

i just tried to power up the phone with keyboard exposed. Powers up the same as with the keyboard hidden. Still boots up fine but black screen. I already have the service manuel dowloaded. i have checked around with several repair places both local and on the web. Seems like no one has any parts for the att fuze/touch pro gsm except for the lcd and digitizer and a speaker.
its quite possible that it is a main board but as the same time it might be something as simple as a ribbon cable. i have contacted htc about doing a possible repair and they want wayyyy too much for just a main board repair almost $400 USD.
Anyone have a bricked/ non working touch pro they would like to sell ? =P

fkoong said:
its quite possible that it is a main board but as the same time it might be something as simple as a ribbon cable.
Click to expand...
Click to collapse
Could be a bad ribbon cable ... and firmly pressing around the front/back of the unit shows no change?

pressing the phone front and back show no changes to display. in a very dark room I can see that there is light emitting from the display but its just the screen is not displaying anything visable. this occured both before and after i changed out the screens. I'll do another visual inspection of all the boards to see if there is any bad resistors burnt out circuits etc.. but i didn't notice anything mentionable during my first 2 inspections. Maybe 3rd time is the charm.
Thanks for all the feedback thus far Hilaireg it is quite appreciated. All this venting has at least made me feel 1000% better than after i replaced my lcd and still same problem at least i don't feel like a complete idiot!

Sorry I couldn't be of much help ... you've done all the steps a seasoned hardware person would do.
Do post back to let other folks know if you get it back up and running.
Cheers,

you have a pm fkoong.

I have possibly the same problem. Phone got wet, dried it out for 2 days (in a container of rice). Phone worked but had "water marks" on screen that disappeared after two days and everything was fine for about 2 weeks. Then one day (happened to be humid misting rain eve in Charleston) the screen is blank (hint of backlight only). A soft reset and it seems OK for about 1hr, then blank again. The hard resest screen displayed OK (readbale text etc), but didnt work. But as I write this, I retry to document it results correctly and the NATF ROM is reloading and the screen works! We will see how long!!
Well.. not that long, the end of the ROM load and it went blank again, seems like a video driver problem. The Press VoluP to boot does show some red artifact.
Trying hard reset again (No SIM no uSD)
The NATF v4.4 loads and gives me the Tap screen, Align Screen, stylus, loads customization, opera, tf3d, then loads a bunch of files under ...... and then the screen goes blank again, seem like what happened last time, so Ill try loading a fresh ROM copy... later

[Q] Nexus 5 screen showing colorful static

Has anyone come across this before? I was watching a video on MX Player not too long ago, and it seems to have resulted in a permanent colourful static for the phone.
I can't really tell if it's doing anything, but when I go through the motions of resetting it or booting into bootloader, the screen does not change at all.
Interestingly the volume buttons are still working, and if I press the area of the screen where I think the buttons are (e.g., the back/home/programs buttons) I get the right vibrations. Which leads me to believe my screen is broken, and that it's a hardware fault. I'm hoping pretty hard this isn't the case, as my phone is only two months old and it was a replacement for a 6 month old Nexus 4 which had stopped charging.
Anyone come across this before? I'm hoping there's a kind of solution somewhere out there... To make matters worse I bought this phone via a parallel importer AND I'm currently overseas and won't be back till the end of January.
Sigh. Photo of screen is as attached - please forgive the terrible quality as I had to use my laptop webcam.
Thanks in advance, everyone!

jono_nz said:
Has anyone come across this before? I was watching a video on MX Player not too long ago, and it seems to have resulted in a permanent colourful static for the phone.
I can't really tell if it's doing anything, but when I go through the motions of resetting it or booting into bootloader, the screen does not change at all.
Interestingly the volume buttons are still working, and if I press the area of the screen where I think the buttons are (e.g., the back/home/programs buttons) I get the right vibrations. Which leads me to believe my screen is broken, and that it's a hardware fault. I'm hoping pretty hard this isn't the case, as my phone is only two months old and it was a replacement for a 6 month old Nexus 4 which had stopped charging.
Anyone come across this before? I'm hoping there's a kind of solution somewhere out there... To make matters worse I bought this phone via a parallel importer AND I'm currently overseas and won't be back till the end of January.
Sigh. Photo of screen is as attached - please forgive the terrible quality as I had to use my laptop webcam.
Thanks in advance, everyone!
Click to expand...
Click to collapse
Only time I've seen something like this was when my integrated graphics card on my desktop overheated, everything still worked, but colorful static everywhere. I'd let it cool down for a while, chances are it was pretty hot when it did that, and see if high temps might make it happen again.

I just had the same thing happen. Phone had been in my pocket and I had just taken it out to check the time maybe 10 minutes before it happened. The only difference with mine was I bumped into a table and hit the phone in my pocket. It does have a case on it and there is no sign of damage at all such as a cracked screen or anything. The static only lasts for a few seconds and thats right after I force it to reboot. After that it just goes to an all black screen. My LED indicator light is still flashing at me telling me I have an email though so I'm not sure what the deal is.

Were you able to resolve this issue? I too just experienced this issue as well and my phone is currently unusable. Thanks!

Do a full wipe as in wiping the entire phone and making it as if you just got it out of the box. if it persist RMA
Sent from my Nexus 5

Hi, I broke my screen (really bad smash) and had have this static on my new screen. The new screen was apparently fully tested. When using the slim port i can display on my TV and the digitizer works fine, its just this same colour static on the handset. I am now waiting for a replacement USB flex (it was a bit bent in the break) and i expect the new USB flex will fix it. If not then its a bad screen.
Will post the results when i get the parts

Fixed!
Hi,
My new USB flex arrived today. I installed it and found my screen is working perfectly.
The first pic is the same colour static that the op had.. Second one is the USB flex board / ribbon. Ebay for 20 Euro. Please remember that USA users are LG D820 and Europe/rest of works LG D821. I think its important for this part as the aerials connect here ans they are different in USA.
Good luck everyone

zeebo1111 said:
Hi,
My new USB flex arrived today. I installed it and found my screen is working perfectly.
The first pic is the same colour static that the op had.. Second one is the USB flex board / ribbon. Ebay for 20 Euro. Please remember that USA users are LG D820 and Europe/rest of works LG D821. I think its important for this part as the aerials connect here ans they are different in USA.
Good luck everyone
Click to expand...
Click to collapse
Hi,
sorry for reopen the topic but I really need to know if change de USB flex solve this problem
thanks

Static screen and freezing
Hi All,
Need help here with my 6 month old Nexus 5. It has been pretty good with no issues but since last evening, it started behaving weird. The chronological events are as follows
1. While browsing on Chrome some websites were not scrolling intermittently. This was only in the browser.
2. After about 10 mins of the above behavior the entire phone froze and didn't release itself. I had to force reboot by holding the power button down for about 10 secs. When the screen came on, it was the static screen
3. I again pressed the power button a couple of times but no use. Held it again for 10 secs, then phone rebooted and everything was fine.
4. Continued to use the phone and everything was normal until this afternoon, when the phone again froze while browsing a website
5. Since then the phone screen shows the static and if I press the power button once, the screen switches off and press again the screen comes on with the display showing properly. I can now only perform one touch which is registered and the screen freezes. If I switch off and on again the next screen / action is shown which is the action I did in the previous touch. Every time it registers one touch and I have to switch off and on again to see the next screen. Sometimes the phone just shows static and I have to wait a few seconds (30 sec) before using it again.
6. If I make a call to my phone, I hear one ring and then it is busy tone like I've cancelled the call. However the phone does not show the incoming call.
My phone has been intact and is well protected with screen guards and case. There is no physical misuse / abuse of the phone. I managed to shut down the phone and enter recovery. Here as well it only registered one touch, though the phone was processing and moving the next step. I somehow managed to initiate a factory reset through the settings, but no use.
Now in about 2-3 hrs the phone has become completely useless. I'm uncertain what the problem is, all my touch inputs are registered and processed. The screen just doesn't refresh to the next and requires a power off/on. I picked up this phone in the US and now in India. So I can't RMA the phone and I don't have warranty for this in India.
Any suggestion will be greatly appreciated.

Madzy said:
Hi All,
Need help here with my 6 month old Nexus 5. It has been pretty good with no issues but since last evening, it started behaving weird. The chronological events are as follows
1. While browsing on Chrome some websites were not scrolling intermittently. This was only in the browser.
2. After about 10 mins of the above behavior the entire phone froze and didn't release itself. I had to force reboot by holding the power button down for about 10 secs. When the screen came on, it was the static screen
3. I again pressed the power button a couple of times but no use. Held it again for 10 secs, then phone rebooted and everything was fine.
4. Continued to use the phone and everything was normal until this afternoon, when the phone again froze while browsing a website
5. Since then the phone screen shows the static and if I press the power button once, the screen switches off and press again the screen comes on with the display showing properly. I can now only perform one touch which is registered and the screen freezes. If I switch off and on again the next screen / action is shown which is the action I did in the previous touch. Every time it registers one touch and I have to switch off and on again to see the next screen. Sometimes the phone just shows static and I have to wait a few seconds (30 sec) before using it again.
6. If I make a call to my phone, I hear one ring and then it is busy tone like I've cancelled the call. However the phone does not show the incoming call.
My phone has been intact and is well protected with screen guards and case. There is no physical misuse / abuse of the phone. I managed to shut down the phone and enter recovery. Here as well it only registered one touch, though the phone was processing and moving the next step. I somehow managed to initiate a factory reset through the settings, but no use.
Now in about 2-3 hrs the phone has become completely useless. I'm uncertain what the problem is, all my touch inputs are registered and processed. The screen just doesn't refresh to the next and requires a power off/on. I picked up this phone in the US and now in India. So I can't RMA the phone and I don't have warranty for this in India.
Any suggestion will be greatly appreciated.
Click to expand...
Click to collapse
I'm getting the same issue. Tried soft and hard reset. Opened her up and seated all cables. The issue is still persisting. Is replacing the USB flex the way to go?

Hey I have a nexus 5 32GB and the screen started to do weird things and now it isn't working at all. Its the same in recovery mode also do I think that it's not a software problem.
I think there is an issue with the motherboard. Please help me out.
Thanks in advance.

nexus565 said:
Hey I have a nexus 5 32GB and the screen started to do weird things and now it isn't working at all. Its the same in recovery mode also do I think that it's not a software problem.
I think there is an issue with the motherboard. Please help me out.
Thanks in advance.
Click to expand...
Click to collapse
Most likely the flex cable
ふかつどう

Anyone seen this colored screen?. I have been getting this past 2 weeks when phone is charging and screen is about to turn off. I am on stock not rooted.

bullorbear said:
Anyone seen this colored screen?. I have been getting this past 2 weeks when phone is charging and screen is about to turn off. I am on stock not rooted.
Click to expand...
Click to collapse
Looks like the daydream function. You can turn it off in Settings>Display>Daydream
Sent from my Nexus 5 Unchained using XDA Free mobile app

Same thing, Screen now black. Won't turn on...
Hey everyone, I know that this is kind of late to the thread, but I have what I believe is the same problem as everybody else here. I had my Nexus 5 in my pocket for maybe five minutes, and in between the times that I put it in my pocket and took it out again to reply to a text, the screen went all colorful and static on me (Red tint, almost as if I had twilight on, but I didn't). I tapped the back, and the colors went back to normal, but the digitizer wasn't responding to touch. Then, It went black. No color, the speakers weren't working, neither was the backlight on the display. I took it apart, and figured its either the USB flex cable (which looked frayed), or the mainboard. If its the USB flex cable, then I know I can repair it. If it's the mainboard... well, as a sixteen year-old who has no current source of income, I'm out of a $400 phone.
Pictures attatched. Thanks!

rikudo said:
I'm getting the same issue. Tried soft and hard reset. Opened her up and seated all cables. The issue is still persisting. Is replacing the USB flex the way to go?
Click to expand...
Click to collapse
I took the phone the LG service center and the technician seemed to know this issue and immediately said that the USB flex cable needs to be changed. The entire fix took about 5 mins and the phone is working fine since then.
Sorry for the delayed response.

I hate to necro up this thread but I'm having similar problems to the op with my nexus 5. About two weeks ago I saw my screen get grainy just like the op and many others mentioned and then the screen went completely black. The screen still "turns on" but it's just black with the backlight on. I can hear notifications and other things and I'm hoping that all I need to replace is just the flex cable. If it's a problem with the logic board then I'm screwed basically.
Anyway that's my story. Bought the flex cable and it'll be here by tuesday so I'll find out then if I'm lucky or not. Fingers crossed.

pezkiln said:
I hate to necro up this thread but I'm having similar problems to the op with my nexus 5. About two weeks ago I saw my screen get grainy just like the op and many others mentioned and then the screen went completely black. The screen still "turns on" but it's just black with the backlight on. I can hear notifications and other things and I'm hoping that all I need to replace is just the flex cable. If it's a problem with the logic board then I'm screwed basically.
Anyway that's my story. Bought the flex cable and it'll be here by tuesday so I'll find out then if I'm lucky or not. Fingers crossed.
Click to expand...
Click to collapse
Hey man, did you ever try this out and get it to work? I have the same problem and was thinking of trying this out but wanted confirmation first.
Thanks!

Just wanted to post here to say that this thread just saved me a lot of money!
Had the same issue (static showing on the screen). Local phone repair shop told me it needed a new screen, without even looking at it(!), and it would be £120 + labour. Told them I would think about it, and came home and did some more research, found this thread. Ordered a replacement USB flex cable from eBay, and fit it by following a YouTube tutorial, and now the phone is back working fine. brilliant!
Thanks xda!

I had a problem where my screen looked like an old CRT TV with particles flashing all over on anything with a static dark background. Any ideas

Looking for informations about daughterboard/ribbon cable issues

Umm... hi
I have two Nexus 5, one which is out of warranty and one brand new one.
So the first one I stopped using because the screen is acting funny.
Meaning suddenly turning black, image flickering, touch not working.
Sometimes tapping on the back of the phone helps, but I do forced reboots alot to fix it.
Also, mic is dead and speaker tends to ask for a tap to make it work here and there.
My second phone was meant as replacement, but after two weeks the backlight
of the entire right screen half started to go on and off several times a day. Tapping helped,
but I just returned to it get it replaced.
On youtube, you will find a huge amount of videos showing how various of those screen
and touch and reception and mic issues can be solved by simply replacing the 20$ daughterboard.
The one connecting the bottom half of the phone with the mainboard. This includes display, mic, speaker
and more. I intend to do that aswell on my broken-af first Nexus, but before that, I thought going to XDA
asking if anyone here knows why this component is so receptible to damage. It's not a moving part
and does not run near the CPU, so I really wonder why this part is failing to incredible often. Anyone can
tell me more about that?
Thanks

Possible display damage? Or proximity sensor issue?

Hi everybody.
I’ve had this phone for 10 months now and it’s been great. Yesterday, when i was trying to make a call, it was telling me that i am too close to the screen. I understood that the proximity sensor was acting funny, but I didn’t had time to look into it, because it was not covered by anything and it was in good light. This morning it was a short white flash when I unlocked it or when I was turning the screen off. It worked great all day after that. Then this evening i was using the phone and all of the sudden the screen started to flash white, then it would turn off fast and back on all white. It did that for 4-5 times, then it went in the state you see in the clip below. At one tine, it turned on like nothing happened for 3-4 seconds.
If i plug the charger in, it reacts normal. It's making the charging sound and it vibrates. Seems to be alive in the background, even though it's not displaying anything.
Does it have anything to do with the proximity sensor? Is it the ribbon cable connecting the display to the motherboard faulty? Should i just order a new display assembly?

Interesting, the next day seems to behave a bit different. I had remote erased it, i didn't want any of my personal data to remain on it.

I have found out that if the brightness level is low, i takes a few seconds until it starts blinking. If the brightness is high, then it does that straight away.

Ok, i will post a follow up for anyone else having the same problem. Now i can see that the display is damaged on the top left corner, the pixels are staying lit up bright. Now i can use it on low brightness for longer periods of time without flickering.
I have ordered a replacement screen assembly and i'm still waiting for it, as i don't have the phone under warranty. Looking forward to getting it fixed.

I have also ordered a replacement screen and will replace it when the shipment arrived. Have you found a repair manual for the screen replacement?
I have already removed the back cover of my phone and it seems it will not be so difficult. But it would be better to follow a manual.

CrisGSM said:
Hi everybody.
Does it have anything to do with the proximity sensor? Is it the ribbon cable connecting the display to the motherboard faulty? Should i just order a new display assembly?
Click to expand...
Click to collapse
I read this post now, I've got this kinda of broblem a month ago, but this happened only when the phone temperature became hot, I mean over 40°C, after a factory reset everything became normal, I no longer got high temperature and this problem don't appear, so at least in my phone it wasn't a hardware problem.
https://u.pcloud.link/publink/show?code=XZlcytkZWeh5RbqPt7fWqlxP3mT0LSb7b3oy

Hey guys I had the exact same problem. I sent my phone back in for repair and this is what I got
We have completed the necessary evaluation and repairs. We have also updated your device to the most current software.
We are in the process of shipping your device back. Typically, you should receive your device within two to three business days.
Repair Info: Display Failure(LCD Crack) (Functional), Display Failure(LCD Screen Bla (Functional), Display Failure(Others) (Functional)
Tracking number: 3939 9990 3569
If you have any additional questions, please DO NOT respond to this email. You may call us at 1-877-817-1759.
My advice is if the phone is under warranty send it in. Seeing this makes me wonder if it's a widespread hardware issue

I have received the replacement display and i have done the repair myself. All is fine, the phone is working good now.

CrisGSM said:
I have received the replacement display and i have done the repair myself. All is fine, the phone is working good now.
Click to expand...
Click to collapse
How was the teardown ? I can't find any videos on it. The axon 7 was a pain for me because the aluminum case was a pain to take off around the corners and got damaged a bit. Hopefully removing the back of the axon 10 is a little easier . Thanks for any info