I hope someone dev help me, i have demo unit(SM-G920F), already flash full stock rom and i have all running except cameras. When i start shows "camera failed", so i make some digging..and i think its firmware problem, my question is its possible to flash this part? or its a part of phone firmware?
I leave screens to see what im talking about.
1.foto- video found on YouTube
2.foto-my phone
Anybody?
Code to check camera fw: *#7412365*
Sent from my SM-G920F using Tapatalk 2
pmbp said:
Anybody?
Code to check camera fw: *#7412365*
Sent from my SM-G920F using Tapatalk 2
Click to expand...
Click to collapse
Did your flashing stock maybe not flash properly? I'd say try to flash full stock again, making sure you have the correct firmware for your phone.
Related
Just for understanding, how do I reset my GalFit to factory?
Does it have flash counter?
What about original recoverymode?
What about root?
Thank you in advance.
Just flash a firmware for your region using odin and you should be back to scratch.
It would take care of everything even the recovery
Sent from my GT-S5670 using Tapatalk
chelsearulz5 said:
Just flash a firmware for your region using odin and you should be back to scratch.
It would take care of everything even the recovery
Sent from my GT-S5670 using Tapatalk
Click to expand...
Click to collapse
And dont forget a factory reset before u upgrade with ODIN wen ur on a custom ROM... it might leave u to a boot loop....
rodsengard you asking this question you being the most active person on the forum...you kidding with us i guess
galaxyfitankit said:
rodsengard you asking this question you being the most active person on the forum...you kidding with us i guess
Click to expand...
Click to collapse
Well, I have really learned much in those 2 month of being here. at this point thanks to all of you for asking and answering. I came here on Forum cuz I bricked my first GFit and now I am really interested in lerning some dev Stuff and understanding our mobile computers.
I´d never ask a serious question like this just for kidding
haha man like your sense of humour
Hahahhaha you got it
Sent from my GT-S5670 using Tapatalk
Degrading to fryo from gingerbread
chelsearulz5 said:
Just flash a firmware for your region using odin and you should be back to scratch.
It would take care of everything even the recovery
Sent from my GT-S5670 using Tapatalk
Click to expand...
Click to collapse
I have a GT-s5670 device and i've upgraded to gingerbread from fryo but now i wanted to degrade it without rooting it.My question is if i use the factory reset function in the setting will it be degraded to fryo?.I really don't know anything serious about Android and stuff so.
Thanks
Balussery said:
I have a GT-s5670 device and i've upgraded to gingerbread from fryo but now i wanted to degrade it without rooting it.My question is if i use the factory reset function in the setting will it be degraded to fryo?.I really don't know anything serious about Android and stuff so.
Thanks
Click to expand...
Click to collapse
No.. reset won't downgrade your phone... you have to flash your phone with Odin using stock froyo firmware which contains 4 files namely, PDA, BOOT, MODEM(PHONE) and CSC.
Sent from Galaxy mini running CM10(Android 4.1.2 (Jellybean)).
degrading is dangerous but you must flash the firmware which contains bootloader (I think it's called arm11boot)
dheeraj (dhlalit11) said:
degrading is dangerous but you must flash the firmware which contains bootloader (I think it's called arm11boot)
Click to expand...
Click to collapse
Yup the tutorial I gave was for that only... but you need to find the appropriate firmware for it.the one which contains four files.
Sent from my SGM using Official Cyanogenmod 7.2 (STABLE)
Hi Guys, i was wondering if theres someone that could help me, oh here is the thing.
i had an issue updating my camera firmware and now is not working i have tried already returning back the phone to Original stock, factory reset and everything, and i cant have access to the code you put in the Dialer the code that starts with *#xxxx# i cant remember the code, i am on JB 4.1.2 Completely Stock when i try to access the camera pops out an error showing "Camera Failed" and both cameras the one in the front and the one in the back non of them are working, i would like to know if theres any way i can fix this maybe Flashing the camera firmware trough CWM or Odin, or maybe something i can execute trough terminal or an app that can update my camera firmware please any suggestion are very welcome and i hope you guys can help me!
Thanks in advanced!!
P.D. Sorry for my english
panicfeaver said:
Hi Guys, i was wondering if theres someone that could help me, oh here is the thing.
i had an issue updating my camera firmware and now is not working i have tried already returning back the phone to Original stock, factory reset and everything, and i cant have access to the code you put in the Dialer the code that starts with *#xxxx# i cant remember the code, i am on JB 4.1.2 Completely Stock when i try to access the camera pops out an error showing "Camera Failed" and both cameras the one in the front and the one in the back non of them are working, i would like to know if theres any way i can fix this maybe Flashing the camera firmware trough CWM or Odin, or maybe something i can execute trough terminal or an app that can update my camera firmware please any suggestion are very welcome and i hope you guys can help me!
Thanks in advanced!!
P.D. Sorry for my english
Click to expand...
Click to collapse
Did you flash the new VRBMD3 bootchain in the root guide? I have discovered that that bootchain is breaking my camera. I flashed the VRBMB1 bootchain and it started working again.
joshua5683 said:
Did you flash the new VRBMD3 bootchain in the root guide? I have discovered that that bootchain is breaking my camera. I flashed the VRBMB1 bootchain and it started working again.
Click to expand...
Click to collapse
Thanks for yout help im actually on VRBMB1 Stock JB ! i dont know what to do im out of ideas!
panicfeaver said:
Thanks for yout help im actually on VRBMB1 Stock JB ! i dont know what to do im out of ideas!
Click to expand...
Click to collapse
sorry I don't know why it's doing that, hopefully someone else here knows
Sent from my SCH-I535
joshua5683 said:
sorry I don't know why it's doing that, hopefully someone else here knows
Sent from my SCH-I535
Click to expand...
Click to collapse
Thank you very much for your help my friend, seems nobody can help me
panicfeaver said:
Thank you very much for your help my friend, seems nobody can help me
Click to expand...
Click to collapse
It still doesn't work after flashing a factory image in Odin without flashing anything else?
Sent from my SCH-I535
just reflash the mb1 modem, rpm, and kernel. should only update the firmware if you are moving to the next build. search for mb1 aio
i just flash this firmware http://forum.xda-developers.com/showthread.php?t=1788313 but still nothing i have the same error "Camera Failed" but nothing is working, not even the LED, the Front neither the Rear camera ...and for my understanding the front and the back camera are on independent modules in hardware connection right? and yes after flashing a factory image doesnt work either!
panicfeaver said:
i just flash this firmware http://forum.xda-developers.com/showthread.php?t=1788313 but still nothing i have the same error "Camera Failed" but nothing is working, not even the LED, the Front neither the Rear camera ...and for my understanding the front and the back camera are on independent modules in hardware connection right? and yes after flashing a factory image doesnt work either!
Click to expand...
Click to collapse
Damn I was about to flash it this morning but ran late for work..... Glad I missed out on this fun parade.... Sorry guys...
seems nobody can help me
panicfeaver said:
seems nobody can help me
Click to expand...
Click to collapse
Maybe you could put the phone 100% stock and return to Verizon saying the camera doesn't work?
Sent from my SCH-I535
joshua5683 said:
Maybe you could put the phone 100% stock and return to Verizon saying the camera doesn't work?
Sent from my SCH-I535
Click to expand...
Click to collapse
yes propably i will do that cuz im so frustrated, the thing is that im outside the US and i will have to send the phone trough DHL or something. so weird this issue but things happen so... but thank's for your help
panicfeaver said:
yes propably i will do that cuz im so frustrated, the thing is that im outside the US and i will have to send the phone trough DHL or something. so weird this issue but things happen so... but thank's for your help
Click to expand...
Click to collapse
No problem good luck
Sent from my SCH-I535
Similar issue a couple days ago. I ended up restoring back to stock ICS using root 66 through Odin, then when the phone offered me to take the Verizon ota I accepted it. Somehow it worked after that, had to root unlock and flash again but it fixed my camera, it's been working just fine since.
P.s. the s3 is my backup phone/aosp guinea pig
Sent from my SCH-I605 using xda app-developers app
panicfeaver said:
i just flash this firmware http://forum.xda-developers.com/showthread.php?t=1788313 but still nothing i have the same error "Camera Failed" but nothing is working, not even the LED, the Front neither the Rear camera ...and for my understanding the front and the back camera are on independent modules in hardware connection right? and yes after flashing a factory image doesnt work either!
Click to expand...
Click to collapse
I'm confused. As previously mentioned this sounds like a firmware issue. It sounds like you have the mb1 factory stock image with an md3 firmware. Did you flash the mb1 aio or the md3 aio? What does your baseband say?
Sent from my SCH-I535 using Tapatalk 2
have you tried this?:
http://forum.xda-developers.com/showthread.php?t=2303329&highlight=camera+fails+to+start
seang said:
have you tried this?:
http://forum.xda-developers.com/showthread.php?t=2303329&highlight=camera+fails+to+start
Click to expand...
Click to collapse
i havent tried that im kind of scared of bricking my phone can i use that method if im on MD3 ? or do i have to be on another version? thanks fot the help!!
BadUsername said:
I'm confused. As previously mentioned this sounds like a firmware issue. It sounds like you have the mb1 factory stock image with an md3 firmware. Did you flash the mb1 aio or the md3 aio? What does your baseband say?
Sent from my SCH-I535 using Tapatalk 2
Click to expand...
Click to collapse
no no no i have the completely stock rom MD3 i downloaded this file http://forum.xda-developers.com/showthread.php?t=2301814 Odex version rooted. do i have to flash de MB1 AIO? Where can i find it? my baseband says this: I535VRBLMD3
Thanks for the help !!
panicfeaver said:
no no no i have the completely stock rom MD3 i downloaded this file http://forum.xda-developers.com/showthread.php?t=2301814 Odex version rooted. do i have to flash de MB1 AIO? Where can i find it? my baseband says this: I535VRBLMD3
Thanks for the help !!
Click to expand...
Click to collapse
(url)http://forum.xda-developers.com/showthread.php?t=1788313
[FIRMWARE] <VRBMD3> (MODEM/RPM/TZ/SBL) Verizon SGS3 (SCH-I535)(/url)
Flash the mb1 firmware package and see what happens, I think it should work.
Sent from my SCH-I535 using Tapatalk 2
BadUsername said:
(url)http://forum.xda-developers.com/showthread.php?t=1788313
[FIRMWARE] <VRBMD3> (MODEM/RPM/TZ/SBL) Verizon SGS3 (SCH-I535)(/url)
Flash the mb1 firmware package and see what happens, I think it should work.
Sent from my SCH-I535 using Tapatalk 2
Click to expand...
Click to collapse
ok thanks i will do it can i just flash it trough TWRP? even if the Stock rom i have is odex?
Finally got the official update to 7.0...
happy update checking =-)
its 1563.03Mb in size.....uploading screenshots in a moment. You don't need to be in the BETA to get the update.
edited.
Can confirm. Its smooth as butter, too.
Sent from my SM-G935T using Tapatalk
Downloading now.
Errrrmerrrgerrrd! Sweet! Downloading now.
I just flashed U firmware like 3 days ago LOL.... gonna revert back since I dont see a firmware download link
updating... :laugh:
Anyone looking for Odin flash files, they are available thru samsung firmware tool, just search xda for it. It's about 2gb to download.
This is what I used: https://forum.xda-developers.com/galaxy-tab-s/general/tool-samfirm-samsung-firmware-t2988647
Sent from my SM-G935T using Tapatalk
Getting mine too
Hey guys, I have a question I hope someone can help me out with. I have the sm-g935v which I flashed to sm-g935u. I'm considering flashing it to sm-g935t since the unlocked firmware will be getting quarterly updates which is unfortunate, and I would like to use samsung cloud, FM radio, and now Nougat. Would I have to factory reset my phone back to the verizon firmware before flashing tmobile's, or can I just flash from my current unlocked firmware straight to tm? Prior to Nougats release, I had downloaded the latest tmobile firmware and tried to flash it with no success so not sure what I did wrong. Any help would be greatly appreciated.
OTA
Won't taking the OTA update certain partitions we don't necessarily want to update? Like the BL, for example? Could this prevent rolling back to 6.0.1 if there are issues? Or does this not matter since we don't have an unlocked BL anyway? Thanksssss
Apparently I do not see that update on my phone as of now
Sent from my iPhone using Tapatalk
vikramdhani said:
Apparently I do not see that update on my phone as of now
Sent from my iPhone using Tapatalk
Click to expand...
Click to collapse
You are on the U firmware from the screenshot you posted.
D1G1T4L said:
You are on the U firmware from the screenshot you posted.
Click to expand...
Click to collapse
It's a good thing or the bad thing that I am on the U firmware
Sent from my iPhone using Tapatalk
vikramdhani said:
It's a good thing or the bad thing that I am on the U firmware
Sent from my iPhone using Tapatalk
Click to expand...
Click to collapse
The update is for T-Mobile users using the T firmware. You are on the US Unlocked firmware.
I got this also and updated this morning. Very smooth and loving it! Did OTA update and one thing i noticed after updating i wasn't able to clear my cache like before. When i power down, hold all 3 buttons (power, home and up key) get a screen more like a warning saying installing other firmware's or roms can damage my device. Not the exact wording but similar. Has anyone else tried doing that and got the same warning msg?
D1G1T4L said:
The update is for T-Mobile users using the T firmware. You are on the US Unlocked firmware.
Click to expand...
Click to collapse
Thanks and appreciate your reply
Sent from my iPhone using Tapatalk
Anyone get package disabler to work?
http://forum.xda-developers.com/showthread.php?t=3558242
Odin files for the U firmware users. This will wipe your phone.
justda said:
http://www.mediafire.com/file/cnrtkb...61s9vc_fac.zip
Osin files for the U firmware users. This will wipe your phone.
Click to expand...
Click to collapse
Thank you. Can't I just download the file on the ad card and just flash it
Sent from my iPhone using Tapatalk
Alright so I'm gonna get straight to it. I bricked my phone. Took it to the tmobile store to try and get them to fix it (probably a mistake). A guy there flashed a galaxy s7 edge rom for my phone and now the camera doesn't work. I've been dealing with it for a while now but it's seriously annoying. Is there any way for me to restore my camera? The device restarts when I open the camera.
Sorry to ask the obvious - is your fon an S7e?
I would start with flashing the latest stock rom using Odin.
Sent from my SM-J700M using Tapatalk
dodo2244 said:
Sorry to ask the obvious - is your fon an S7e?
I would start with flashing the latest stock rom using Odin.
Click to expand...
Click to collapse
Nope, it's a galaxy j7 actually. SM-J700T to be specific
Another one - what is stopping you from flashing a stock rom?
Sent from my SM-J700M using Tapatalk
dodo2244 said:
Another one - what is stopping you from flashing a stock rom?
Click to expand...
Click to collapse
My ignorance pretty much. The first time I bricked my phone I THOUGHT I knew what I was doing. If someone could possibly link me to some very specific directions that would be cool. I just don't wanna deal with that again.
Go here https://forum.xda-developers.com/showthread.php?t=3696306
Follow steps 1 to 7.
At step 7 flash the stock rom NOT Twrp
Get the stock rom fon here www.updato.com
Sent from my SM-J700M using Tapatalk
dodo2244 said:
Go here https://forum.xda-developers.com/showthread.php?t=3696306
Follow steps 1 to 7.
At step 7 flash the stock rom NOT Twrp
Get the stock rom fon here www.updato.com
Click to expand...
Click to collapse
Alright, I'm gonna try this. I appreciate the help!
I wish i had found this site before trying to downgrade my phone to marshmallow 6.1 from nougat 7.0
i have only tried stock firmware, it says the stock 7.0 rom is still there but i wont boot.
does anyone have a back up restore image that i can place in storage to get my phone working again.
i'm feeling useless as i forgot to back up my original image.
Have a look on galaxys6edgeupdate thered lots of stock firmwares both for gs6 + gs6 edge
Sent from my D5503 using Tapatalk
kristof5 said:
Have a look on galaxys6edgeupdate thered lots of stock firmwares both for gs6 + gs6 edge
Sent from my D5503 using Tapatalk
Click to expand...
Click to collapse
I have now fixed the phone with patched odin on this site.
worked first time.
thanks for reply though..
No problem
Having a problem with my s6 could you send me a link to the patched odin
crazyboyxda said:
I have now fixed the phone with patched odin on this site.
worked first time.
thanks for reply though..
Click to expand...
Click to collapse
Sent from my D5503 using Tapatalk
can i have a link to the patched odin