OMNI 5.1 P6200, baseband unknown, simcard not detected - Samsung Galaxy Tab Plus

Hi,
I've tested the OMNI 5.1 for P6200, from the lockscreen to everything were smooth, only some bugs that can be found on the original thread. However the simcard are not detected and the baseband unknown, accessing the network option only fc ing the setting menu.
I've looking into other device forum and they fix this by flashing their modem.bin using odin. Is it possible to fix it that way? Thank you.
Curently on CM12.1 latest build (only bug is thenlockscreen are always restart with systemui are not responding, but not major problem)
Sent from my GT-P6200 using XDA Free mobile app

The last build that worked with my sim card was 4.4.4
since then I couldn't use sim card at all

Tested the latest OMNI 5.1.1 build, fast install, fast initial system boot and overall it seems more stable than latest CM 12.1 (great work Daniel ) however after several reboot and waiting, my simcard are still not detected. Too bad, maybe i did something wrong or maybe not . Anyway going back to Cm 12.1 as my daily.

Related

[Q] Cannot connect to camera for d2lte

I have 2 of the same phones (i747M with twrp 2.7.1 for d2att installed)
On one, everything worked flawlessly (the older one)
On the other, I had to talk to a developer of twrp to get twrp working...
Now I just realized that the camera app isn't working. It works fine when I restore to the touchwiz stock rom.
I tried wiping my entire device before installing the new stable build 6 rom for d2lte. I also tried flashing the weekly roms for that device on both phones
the result is the same: camera works fine on the older phone while on the newer one, it doesn't
Someone suggested that this might be a hardware issue.. Basically, the TWRP guys fixed my other problem by pulling the latest cyanogenmod build and compiling a recovery. -So I'm wondering if something can be done to make my camera work again on my new phone...
(Before all of this, I of course tried rebooting, closing other apps, clearing data, etc...)
Update: I tried flashing the latest cyanogenmod nightly (June 30) and the camera app worked, but I prefer slimrom
Another update: all the bug report shows when I reproduce the error is
Device: Slim-d2lte-4.4.4.build.6-OFFICIAL-5242
Kernel: 3.4.95-cyanogenmod-gd56ed95 [email protected] #1

[Completed] [Q] Strange problem with GT-I9300

I have a problem with a Samsung Galaxy S3 (GT-I9300) which belongs to a friend.
He wanted Lollipop on the device so I flashed an Unofficial CM12 from here - http://forum.xda-developers.com/gala...od-12-t2936990
However he seemed to be experiencing some bugs with the ROM so he wanted to revert to stock ROM until more stable builds arrived.
I flashed the stock ROM 4.3 obtained from SamMobile but on this the SIM wasn't working. Same results were obtained by official 4.0 and 4.1.
I finally decided on the official CM11, grabbed the latest stable build and tried flashing it. But now the ClockworkMod recovery returned 'Status 7'. Repeating the process with device id verification removed gave 'Status 6'.
To get the device in working condition I had flashed Korean Service ROM by Samsung. This is working with the SIM card with a few bugs.
One other curious observation was while copying the CM11 to the internal memory. The copy window was dismissed before the green copy bar reached the end. I had to flash it with an external SD Card which seemed to have normal copy process.
This entire process has been repeated on a different PC with all fresh downloaded ROMs but gave the same results as before with the only exception of SIM recognition but no signal on CM12.
Any help would be appreciated to get the device working normally.
Hi, thank you for using XDA Assist. I see you've asked your question here, http://forum.xda-developers.com/galaxy-s3/help/strange-problem-gt-i9300-t3094882 That is the best place to ask so I'm going to close this thread.
Good luck!

X9009 OPPO F1Plus CM12.1 BOOT, URGENT,DEVs needed..

Hey everyone here, i have tried some wuxian CM builds last couple days back, firstly i'm not a new guy on this things, flashing,rooting android devices, but here i now asking everyone of you.
Bad project i started picking my wife's phone as a test. Rooting with someone here @xda tgread sharing some autoroot zip, then i flash the twrp, i've backup of stock recovery.. And am not stop there you know its should be amazing if you run some AOSP based rom on this beast, then i start searching, and jumping from some thread out there Vietnam,chinese forum and i'm really lucky that found the Wuxianlin sharing files from some chinese giant search engine, i'm really happy downloading some stuff and damn cool he has the CM12.1 which i really thank him for it, he's actively pushing some new builds, as i found some number builds at there.
Yaaay its CM12.1 , i fully back up the rom with TWRP then flashing the CM12.1 and opengapps 5.1 ..rebooting right after flash WTF Cool its boot and its 100%fully stable & smooth, except the simcard won't detected as i found that in setting app seem the baseband is unknown (i do have a backup of NVRAM,imei,etc).. i dig it more how that sim cannot be detected, my personal reasons: its because the Wuxianlin build its CM based/specific R9m(Chinese varian), as i'm on international variants (X9009) so i tried thingking to make some changes/convert the devices as R9m, restoring the stock recovery (this the fault ive made as i believe Wuxian has the stock recovery of some official build) ,downloading the official rom that Wuxian reserved on his drive, flashing the stock recovery(my backup), and flashing official rom from him, but its failed to update.. Panic started here as i already wiping the rom si there's no chances to boot into the rom , as stock recovery won't mounted as MTP this a really annoying, now i'm stuck on recovery(official).
Searching some SPFlashTool rom and this was my last chances to bring my phone back to live, damb its really hard to find the SPFlashtool ROM for this devices, till ive finally found one on Vietnam forums, downloading and extracting the rom , try to flash it but always failed, the more panic situations comes up when i choose the upgrade tab on SPFlashtool option (which its formated whole partitions) and yess its still failed to load, some error pop-up right after the yellow bar flashing progress..seems the scatter file was fault,missmatch as the error said.
Now i'm stuck on blackscreen and no recovery, its only vibrate when i try to power it down. I REALlY NEED help and please somebody here share me the MTKDroidtools backup rom, or some has the SPFlashtool Firmware please share here thanks
Hi plz guide how to install cm12.1 on oppo f1 plus
Sent from my SM-N900 using XDA-Developers mobile app
Not now till i fixed this phone sorry, just in case nobody got the same problem as mine
Back in actions..revived mine now trying to flash the CM again, can you guys help me which baseband files to backup on mediatek devices
Prooof
GREAT THANKs @wuxianlin credit and BIG RESPECT for him
Known bugs on X9009 (international)
-NO SIM, No imei, perhaps i need to convert to R9m then see is the SIM detected.
-Video recorder only show Green colour
-fingerprint not detected
-BSOD
Plz share instructions. How can we install the same. Thanks in advance
Sent from my SM-N900 using XDA-Developers mobile app
Will share it need time to mirroring some files damn BAIDU was too slow.. Hang in there, i'll share you some links in here
OK thanks
Sent from my SM-N900 using XDA-Developers mobile app
Waiting for your reply
Sent from my SM-N900 using XDA-Developers mobile app
Rooting instruction and needed files head to here http://forum.xda-developers.com/opp...de-rooting-oppo-f1-plus-t3413939/post67649763
And fore those whose wanna try CM12.1 by Wuxianlin make sure you have a BACKUP!!! *warning currently twrp backup cannot be restored system partitions won't restored. *Do resize system partitions on TWRP (make sure that you mounted the system before) to be able restoring that huge system partitions.
Inclueded in drive folder :
Google Drive https://drive.google.com/folderview?id=0B5a7P0fADT0_U0dSYnNxbHg5ZDQ
1. update.zip for root the devices
2. TWRP ver 3.0.2 flash with flashify
3. CM latest build from wuxianlin netdisk.
4. Stock Flashtool rom just incase you mess with your phone.
5. FlymeOS + keyguard fix
Known bugs Cm12.1
- No SIM as this build based on R9m(chineseversion)
- GREEN video recording
- sometimes BSOT
- Fingerprint doesn't work
Some sources pergaps help some devs as refference:
https://github.com/wuxianlin/android_vendor_oppo_r9
https://github.com/wuxianlin/android_device_oppo_r9
CREDIT&THANKs to Wuxianlin a chinese Oppo Dev, big respect to him.
Thanks downloading now. Will let you know
Sent from my SM-N900 using XDA-Developers mobile app
Some method Trying to make the SIM detected, but all useless and FAILED :
1- trying convert X9009 variant to R9 downloading firmware flashtool, but failed to flash the R9rom to X9009, some error on flashtool that cannot be translated since its in Chinese.
2- flashing via TWRP, since rhe twrp its self was build for R9 variants, downloading some OTA (StockRom of R9), flashing and its boot up, everythings work good here, finger,sound,sensor,camera etc, except no gapps, and SIM not recognized the baseband itself was unknown status, and mess imei numbers.
3- Backup whole imei and basebands related partitions on stock X9009 (NVRAM,SECRO,NVDATA), flashing R9 stock OTA&rooted, restoring whole Backup parritions bellow and still no luck, Baseband status unknown.
-flashing CM12.1 rom and restoring the whole backup baseband and imei related still failed.
4. Try to use MTKDroidTool somehow the NVRAM&Imei backup cannot be done since the tab not even click-able.
CM12.1 it does have rhe sane issue/bug according to wuxian*
"R9m is my own machine, do not intend to often used to play ROM; CM just do play, do not seriously; the other hand, it is estimated that not many people have a third-party ROM needs.
Known bugs:
1. Fingerprint can not be used
2. Unicom card needs to re-card only signal, mobile card does not seem to signal"
If anyone of you has some suggestions,advice..share here please and thanks
Not working
Sent from my SM-N900 using XDA-Developers mobile app
What's not work?
Rooting was successful
But tarp with flashify was unsuccessful
Sent from my SM-N900 using XDA-Developers mobile app
Grant root access for flashify backup your stock recovery before flashing the TWRP its work for me, even on the latest OTA
But as you mentioned sim is not working and the fingerprint is also not working.
Sent from my SM-N900 using XDA-Developers mobile app
Its for CM not caused by flashing TWRP, ots just optional if you wanna try AOSP sensations just flash that CM
Can you plz give link for that
Sent from my SM-N900 using XDA-Developers mobile app

Mobile Data not working for some apps in latest Nougat Builds.

Hello everyone,
Like the title says mobile data is not working for some applications in latest nougat builds , changing different roms does not work either. crDroid, Tugapower, Resurruction Remix, all apps are working perfectly on wifi data, but as soon you switch from wifi to mobile data some apps like for example Facebook app will not use mobile data. And as soon as you switch from mobile data to wifi, applications will work normally. As mentioned above this happened with almost all latest nougat ROMs which i have tried. So I tried MM based Oxygen Os port from OneplusX and applications worked just fine with that ROM. So anybody faced same issue with Nougat based ROM and found any workaround for the same? I cannot search forums for the same as i have very busy work schedule, so please kindly point me in the required direction whoever have solution to this.
THNX in advance.
r4ronak77 said:
Hello everyone,
Like the title says mobile data is not working for some applications in latest nougat builds , changing different roms does not work either. crDroid, Tugapower, Resurruction Remix, all apps are working perfectly on wifi data, but as soon you switch from wifi to mobile data some apps like for example Facebook app will not use mobile data. And as soon as you switch from mobile data to wifi, applications will work normally. As mentioned above this happened with almost all latest nougat ROMs which i have tried. So I tried MM based Oxygen Os port from OneplusX and applications worked just fine with that ROM. So anybody faced same issue with Nougat based ROM and found any workaround for the same? I cannot search forums for the same as i have very busy work schedule, so please kindly point me in the required direction whoever have solution to this.
THNX in advance.
Click to expand...
Click to collapse
Same here, but with ALL applications. But not always, happens randomly.
Workaround: reboot ?
Hello,
My oneplus One has Sultan's ROM, latest version for branch Android 6.
I have the same problems that's around a week, since I flashed.
Symptoms are : mobile data is working, but if switch it off for a long time, when I switch it back it's not turning on, I have to reboot to make it work again.
The wifi doesn't have the same problem, I can switch off and on.
So maybe it's a CM/LineageOS bug ?
-----
ok it's working again now. I'm htinking about a mobile data provider problem ...
mrpitou said:
Hello,
My oneplus One has Sultan's ROM, latest version for branch Android 6.
I have the same problems that's around a week, since I flashed.
Symptoms are : mobile data is working, but if switch it off for a long time, when I switch it back it's not turning on, I have to reboot to make it work again.
The wifi doesn't have the same problem, I can switch off and on.
So maybe it's a CM/LineageOS bug ?
-----
ok it's working again now. I'm htinking about a mobile data provider problem ...
Click to expand...
Click to collapse
like i said it works for some apps and not working for other apps, and it is not ISP's problem, problem is related to all the ROM I guess.

Camera and Flashlight error in LineageOS 17.1 osprey

So I had installed the latest lineageOS version ( 17.1, android 10, osprey moto g3) from the official website and flashed it correctly, but after some time, I noticed that the torch icon was greyed out in the status bar and any camera app won't work.
The app showed- "Camera stopped working"
Cleared cache, app info, rebooted the phone but nothing seemed to work.
I thought that flashing the ROM again would fix it, I redownloaded the latest lineageOS version, new GApps, and flashed it in the correct way( first wipe then flash), but the issue came back after a few reboots.
So I rebooted again and it got fixed, but I think the issue might spring back.
Is there any fix for this?
atharvvvg said:
So I had installed the latest lineageOS version ( 17.1, android 10, osprey moto g3) from the official website and flashed it correctly, but after some time, I noticed that the torch icon was greyed out in the status bar and any camera app won't work.
The app showed- "Camera stopped working"
Cleared cache, app info, rebooted the phone but nothing seemed to work.
I thought that flashing the ROM again would fix it, I redownloaded the latest lineageOS version, new GApps, and flashed it in the correct way( first wipe then flash), but the issue came back after a few reboots.
So I rebooted again and it got fixed, but I think the issue might spring back.
Is there any fix for this?
Click to expand...
Click to collapse
Hello members,
Last week i'v also installed the latest lineageOS version ( 17.1, android 10) Gapps nano, on my Samsung A3 2017. With the TWRP tool., Nice ROM!
Unfortionally with the same issue as above, Samsung and other camera app's very often not working, need to reboot to fix that.
The flashlight does not work either then, and much more irritating BlueTooth not working anymore, my A3 always had perfect connection with my Parrot carkit CK3100.
I'v found in several forum some workarounds for this but these do not solve the issues long enough.
But the issues are also found in older releases from LineageOS.
Will there be a update for these mentioned 3 issues?
If not, i need to install another ROM which is not based on LineageOS.
The Cam and BT must work without any problems.
Thank you very much.
Frank.

Categories

Resources