Related
I got my screen protector in the mail today and put it on my phone. I figured I should share my thoughts along with some pictures for those who are looking at screen protectors.
The pack came with two screen protectors, a squeegee, some dust removal stickers, and a small micro fiber cloth. The protector was not too bad to put on, pretty similar to other dry application ones and the Realook which I have used on my Samsung Vibrant. It was kind of tough to align because the screen protector is literally exactly the width of your screen, so if you're off alignment, it looks horrible.
The screen protector is definitely super clear. It also is a fingerprint magnet, and it feels slightly tacky. I'm hoping that tackiness will go away as it gets more use, because I like being able to glide over my screen smoothly.
One huge disadvantage with this screen protector is that because of the curved screen, the protector only covers the flat part. It is definitely noticeable when you see it closer. I tried taking pictures to depict this. I also with they would have just had the protector cover the FFC. I'm not sure how it would actually affect the optics (if at all), but I really hate that cut out! Overall, I'm decently content with my purchase, but I would love to see pics and reviews for BSE when those arrive since I'm considering that for the back, and even replace the front if I end up not liking the Spigen.
Thanks so much for these. I used the SGP on my Gnex and loved it. There's something special about these Crystal series ones but I don't remember what it is.
Sent from my Nexus 4 using Tapatalk 2
I got the Ultra Clear for my N4. It hasn't arrived yet, so for now I'm using my spare One X Oleophobic. The Oleophobic is great, really good for repelling fingerprints, I would have got it but when I bought my N4 UltraClear they weren't selling the Oleo. Thanks for the pictures, it seems to fit a lot better than the One X SGP protectors did on the One X. Doesn't look too bad at all.
I got the crystal clear and I have the same issue with the protector being too small. I know that this has been the case with some their other protectors, but I'm going to have to try some other brands. I can't stand it being cut off like this.
Sent from my Nexus 4 using xda app-developers app
Where did you get it from ?
juventuss said:
Where did you get it from ?
Click to expand...
Click to collapse
The Spigen website.
I wonder if using the Google Bumper will hide the fact that it doesn't quite reach the edges.
I got the oleophobic one in today from SGP, it doesnt cover the whole screen either. Better than nothing i guess for now.
I'm starting to have a huge distaste for the curved screens. Feels nice with the hardware buttons on my S3, but looks like utter garbage with a screen protector.
jackierobinson said:
The Spigen website.
I wonder if using the Google Bumper will hide the fact that it doesn't quite reach the edges.
Click to expand...
Click to collapse
The bumper does not cover it.
Also big warning for people looking to buy SGP: The light sensor is covered by this screen protector (not cut out like most) and it interfered with the functionality of the phone. In the past I've had screen protectors that went over the sensor without issue, but with this particular protector and phone, it did not work.
For example if i went to make a phone call, the screen would stay dark even if i took the screen away from my face. Also auto brightness didn't work either. I had to cut the film to expose the sensors. Everything is working normally now. Anyone else have this issue?
Also received mine today, dont have the phone yet though. Not feeling too happy about it already seeing as it doesnt cover the curved screen too well... Money down the drain then :s
Mine will arrive today and I plan to put it in a case so its not a big deal. The SGP on my Note 2 didn't go all the way to the edge either. A tpu case fixed that and everything was covered.
Sent from my Nexus 4 using Tapatalk 2
Good thing I waited. I am planning on using this phone with screen protectors only and I can't pay for a high quality one that looks pretty bad IMO.
Looks great. SGP never usually covers the entire front. It is always just a tad bit smaller.
You guys do know it has to be cut smaller because the curved edges will make the protector peel right?
ceejay83 said:
You guys do know it has to be cut smaller because the curved edges will make the protector peel right?
Click to expand...
Click to collapse
Yes, I'm just hoping someone finds out a way to make t stick over the curved glass. I guess I am going to have to go with a wet screen protector.
ceejay83 said:
You guys do know it has to be cut smaller because the curved edges will make the protector peel right?
Click to expand...
Click to collapse
Yes, but it stops way short of the curve. It literally just covers the display (width wise). They could have extended it a bit further. This is going to leave a gap, even with a TPU case on it.
How is the smoothness of these screen protectors? I really like the way zagg HD screen protectors feel and I'm looking for something similar.
Just received mine today. Installation was straightforward and the dust removal stickers easily snatched up the remaining few bits of dust at the end. The surface slickness is shockingly poor at first but improves drastically after just a few minutes.
The film doesn't run all the way to the edge due to the curvature of the screen, but there may be a solution. Steinheil makes a dry application edge to edge film called Curved Crystal for the SGS3 which also has a curved edge screen. If there is enough interest, I'm sure they will make one for the N4.
NYConex said:
How is the smoothness of these screen protectors? I really like the way zagg HD screen protectors feel and I'm looking for something similar.
Click to expand...
Click to collapse
I'm not sure how smooth the zagg HDs are, but right after you put the screen protector on, it is really tacky. But it gets much more smoother as you use it. I think that as you use it more, you're depositing more skin oils onto to screen protector and it kind of "seasons" the screen protector.
This sounds weird, but I just put a bunch of fingerprints on it, then I distributed it using a dry kimwipe (i'm sure a microfiber would work too) and after using it for about 24 hours, it's pretty much as slick as you would expect from the bare glass. Also, of course there is no orange peel feeling since this is a dry application screen protector.
ewuzh said:
Just received mine today. Installation was straightforward and the dust removal stickers easily snatched up the remaining few bits of dust at the end. The surface slickness is shockingly poor at first but improves drastically after just a few minutes.
The film doesn't run all the way to the edge due to the curvature of the screen, but there may be a solution. Steinheil makes a dry application edge to edge film called Curved Crystal for the SGS3 which also has a curved edge screen. If there is enough interest, I'm sure they will make one for the N4.
Click to expand...
Click to collapse
they already emailed me back saying they don't have plans to make any.
Does anyone have the Spigen dual side screen protector with the play store Nexus 4 Bumper?
If you do- How does it fit and would you recommend it because I'm looking at possibly getting this combo.
I could save $15 and get a poetic bumper for $5 instead of the $20 play store one. The only thing is I prefer the look of the play store one.
I can also get the play store one for much cheaper later on.
I was also thinking of getting the Poetic Atmosphere because it looks so nice on the iPhone 5 an the Spigen (just front) screen protector.
But maybe I'll just get them both and decide for myself.
I have the spigen dual ordered. Should be here next week. I have the bumper already but I'm not sure if I'm going to keep it or not. I'm not liking how it makes the phone feel. The bumper is not as slim as I thought.
I have this exact combo - simply perfect.
Sent from my Nexus 4 using xda app-developers app
illmaticone said:
I have this exact combo - simply perfect.
Sent from my Nexus 4 using xda app-developers app
Click to expand...
Click to collapse
Any picture would be great
illmaticone said:
I have this exact combo - simply perfect.
Sent from my Nexus 4 using xda app-developers app
Click to expand...
Click to collapse
I have the combo as well and I wouldn't necessarily call it perfect, though I like the combo. I think the front protector doesn't cover enough of the sides, so there is a gap between the bumper and the protector... You can feel it when swiping from the edges (ex: when switching between tabs in Chrome).
I think a better case / protector combo is the Spigen with Diztronic... The case covers enough of the sides so there is barely a gap on the sides.
Anyways, since I prefer the bumper, I'll wait for the Phantom tempered glass protector and hope that the fit will be nicer.
I'll try to post a few pics tomorrow.
Sent from my Nexus 4 using xda premium
I have the same combo and like others have mentioned I don't like that the front protector does not go edge to edge on the screen, but it was expected. I don't like wet application ones so I'll just suck it up.
Sent from my Nexus 4 using xda app-developers app
I would love to know if there are any other Dry Application Screen Protectors that cover the N4 Screen Completely?
naruses said:
I would love to know if there are any other Dry Application Screen Protectors that cover the N4 Screen Completely?
Click to expand...
Click to collapse
Spigen released some dry application ones for the Galaxy S3 that covered the whole screen (which has curved edges) so we just have to wait!
Spigen has made curved glass protectors before (for the gs3) but the reviews for that particular protector are terrible.
The hardness is half that of the current N4 one they have.
Can somebody please post a picture of the combo.
And has anybody dropped their phone? Any stories about the combo?
frusso21 said:
Can somebody please post a picture of the combo.
And has anybody dropped their phone? Any stories about the combo?
Click to expand...
Click to collapse
Here you go (also showing my first attempt at snapseed haha). The protector just barely reaches to where the screen begins to curve down on the sides. The back is near perfect luckily. Let me know if you need to see any additional pictures.
Sent from my Nexus 4 using xda premium
FYI, the ZAGG ones work flawlessly with the official bumper.
fluffenforliberty said:
Spigen released some dry application ones for the Galaxy S3 that covered the whole screen (which has curved edges) so we just have to wait!
Click to expand...
Click to collapse
While the novelty of the Spigen Curved Crystal protectors is nice, they are incredibly easy to scratch it seems. I have a coworker that got the Curved Crystal protectors for her GS3, and she was disappointed at how easily they got visible hairline scratches. The first one she was rough with, but the 2nd one she took care to keep covered with the official GS3 book-like case that has a front flap, and it somehow still managed to get scratched.
I really think that if you want to cover the whole glass on the Nexus 4, you pretty much have to go with a wet apply. I'm almost a mandatory dry apply person, but I must say, it really makes it look as if you cheaped out on the screen protector to anybody else that looks at your phone. The bumper only accentuates this visual problem. Personally I'm cursing LG and Google for even doing this to the screen, it seems utterly gimmicky, pointless, and makes it absolute hell to get a good smooth dry apply screen protector on the phone. I find myself actually avoiding using the sloped edge because I run right into the edge of my dry screen protector. I usually start my swipes right at the edge of the screen protector.
Elsydeon said:
I really think that if you want to cover the whole glass on the Nexus 4, you pretty much have to go with a wet apply. I'm almost a mandatory dry apply person, but I must say, it really makes it look as if you cheaped out on the screen protector to anybody else that looks at your phone.
Click to expand...
Click to collapse
What is the difference between dry and wet application in terms of the screen's curve.
Correct me if I'm wrong but what I take you're saying is that wet application screen protectors will cover the entire (curved)N4 screen as dry ones won't (or if they do they won't be too good)
frusso21 said:
What is the difference between dry and wet application in terms of the screen's curve.
Correct me if I'm wrong but what I take you're saying is that wet application screen protectors will cover the entire (curved)N4 screen as dry ones won't (or if they do they won't be too good)
Click to expand...
Click to collapse
I don't actually have a wet apply protector myself, but I ordered a Best Skin's Ever full body set that should be delivered sometime next week, along with a Spigen Dual set. From reading up on them though, it seems like all of the wet apply ones do actually cover the entire glass, which would make sense as they're totally floppy and flexible during the installation phase. The tough part, even with those, seems to be getting them to cure and stick permanently to the curved glass.
I think I'll give the BSE a try and see how it goes before the Spigen, based on some people's comments that the BSE seems smoother than other brands of wet applies. I typically really hate the rubbery drag that the wet applies have.
jdavet said:
Here you go (also showing my first attempt at snapseed haha). The protector just barely reaches to where the screen begins to curve down on the sides. The back is near perfect luckily. Let me know if you need to see any additional pictures.
Sent from my Nexus 4 using xda premium
Click to expand...
Click to collapse
Is it just me or does the bumper look green in those pictures?
Sent from my awesome Nexus 4 using Tapatalk 2.
F0rgiven said:
Is it just me or does the bumper look green in those pictures?
Sent from my awesome Nexus 4 using Tapatalk 2.
Click to expand...
Click to collapse
I think I put a little too much contrast in it... I wish I could tell you that I have a special edition bumper or something, but I don't.
Sent from my Nexus 4 using xda premium
Spigen told me they are not going to release any dry application screen protector that covers the whole screen:/
Source: http://www.facebook.com/unitedsgp/posts/493703470650218
Elsydeon said:
I don't actually have a wet apply protector myself, but I ordered a Best Skin's Ever full body set that should be delivered sometime next week, along with a Spigen Dual set. From reading up on them though, it seems like all of the wet apply ones do actually cover the entire glass, which would make sense as they're totally floppy and flexible during the installation phase. The tough part, even with those, seems to be getting them to cure and stick permanently to the curved glass.
I think I'll give the BSE a try and see how it goes before the Spigen, based on some people's comments that the BSE seems smoother than other brands of wet applies. I typically really hate the rubbery drag that the wet applies have.
Click to expand...
Click to collapse
I think I may post a tread for wet vs dry application screen protectors in terms of curved screen as I'm interested in finding out if the wet screen protectors actually do fit the whole screen.
DforDesign said:
Spigen told me they are not going to release any dry application screen protector that covers the whole screen:/
Source: http://www.facebook.com/unitedsgp/posts/493703470650218
Click to expand...
Click to collapse
That post is 2 weeks old. I'm sure that will change.
Are they any Cases for Note 7 that goes over the Edges,to protect the Curved Edges ?
why would you want a case that covers part of the screen? just get a screen protector and a regular case. problem solved.
probablecauzdnb said:
why would you want a case that covers part of the screen? just get a screen protector and a regular case. problem solved.
Click to expand...
Click to collapse
So the edge is protected. IMO the edge is a stupid design. Does it look cool? Yes, but I see a lot of broken screens from a bump to the edge. We need a flat n7.
suzook said:
So the edge is protected. IMO the edge is a stupid design. Does it look cool? Yes, but I see a lot of broken screens from a bump to the edge. We need a flat n7.
Click to expand...
Click to collapse
the edge is part of the viewable screen. so a case that covers that covers part of the screen. there are plenty of screen protectors that cover the edges just fine. most cases cover the rest of the phone from being damaged. i was not a huge fan of the edge when they first started using it. but it looks like that is the direction samsung has gone. probably shouldn't have gotten a note 7 if you don't like the edges
jassu said:
Are they any Cases for Note 7 that goes over the Edges,to protect the Curved Edges ?
Click to expand...
Click to collapse
Best buy platinum case does
Sent from my SM-N930V using XDA-Developers mobile app
probablecauzdnb said:
the edge is part of the viewable screen. so a case that covers that covers part of the screen. there are plenty of screen protectors that cover the edges just fine. most cases cover the rest of the phone from being damaged. i was not a huge fan of the edge when they first started using it. but it looks like that is the direction samsung has gone. probably shouldn't have gotten a note 7 if you don't like the edges
Click to expand...
Click to collapse
We didn't have a choice. You can't have a note now without the stupid edge screen. Like he said. Looks neat. Then it's just annoying. My wife had an S6 Edge Plus and returned it after a couple days for the flat screen version. She hated it too. Unintentional screen taps, no tempered glass screen protectors that don't suck. I'm putting up with it because I have to and love everything else about the Note 7 but this edge screen is just lipstick..... all show and no go and unnecessary.
Sent from my SM-N930V using Tapatalk
I am also interested in a good protective case, it doesn't neccessarily have to cover the edge screen like Platinum (that case is expencive and ugly in my opinion), but I do wish the lips on edges would be well above the actual screen. I hope I wrote that clearly.
I am also shocked it is so hard to combine the screen protector and a a case.
Spigen neo hybrid is the case I'm using and it sinks into the edges just enough so it doesn't cover any of the display
I don't think that is what the author is asking about though.
https://www.amazon.com/gp/product/B01INA04A4/ref=oh_aui_detailpage_o01_s01?ie=UTF8&psc=1
I bought the one in the link above. The edges come up higher than the display, they don't really "cover" the edges much if at all, but are above the curved edges so that they help protect from drops. This is exactly what I was looking for. This is my case I use when I may be in a situation that the phone is more likely to be dropped or something similar. I don't use the edge feature anyway, but you still could if you really wanted with this case, just not as easily. I doesn't make the display size smaller by covering it up so IMO this is the best option if someone wants to protect the edges more without them actually being covered.
teegunn said:
https://www.amazon.com/gp/product/B01INA04A4/ref=oh_aui_detailpage_o01_s01?ie=UTF8&psc=1
I bought the one in the link above. The edges come up higher than the display, they don't really "cover" the edges much if at all, but are above the curved edges so that they help protect from drops. This is exactly what I was looking for. This is my case I use when I may be in a situation that the phone is more likely to be dropped or something similar. I don't use the edge feature anyway, but you still could if you really wanted with this case, just not as easily. I doesn't make the display size smaller by covering it up so IMO this is the best option if someone wants to protect the edges more without them actually being covered.
Click to expand...
Click to collapse
Senior Member143 posts Thanks: 14
https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1
I bought the one in the link above. The edges come up higher than the display, they don't really "cover" the edges much if at all, but are above the curved edges so that they help protect from drops. This is exactly what I was looking for. This is my case I use when I may be in a situation that the phone is more likely to be dropped or something similar. I don't use the edge feature anyway, but you still could if you really wanted with this case, just not as easily. I doesn't make the display size smaller by covering it up so IMO this is the best option if someone wants to protect the edges more without them actually being covered.
Click to expand...
Click to collapse
That is strange because on the pictures the case edge doesn't look raised at all.
I am all for using the edges but they should be protected. Most cases look like too small bras in my opinion. I was under the impression Speck could offer a case we are looking for but we won't know before someone posts a review with an actual phone it the case.
notefreak said:
That is strange because on the pictures the case edge doesn't look raised at all.
I am all for using the edges but they should be protected. Most cases look like too small bras in my opinion. I was under the impression Speck could offer a case we are looking for but we won't know before someone posts a review with an actual phone it the case.
Click to expand...
Click to collapse
If you look close at the pictures you can see more plastic above where the buttons on the side are located. This was my clue that the case had raised edges on the side too. I have the case and can verify that the sides of the case are higher than the display, even with a tempered screen protector on. The case does as a little more bulk than I like mostly from the thicker corners they built into the case to take the shock of a fall better, but it still isn't a bulky case. Just bigger than my Ringke slim case I also have.
Tech 21 was expensive in the Att store but it raises around the edge slightly to make it slightly raised when face down...its a decent case but I'm still paranoid of glass shatter if it falls face down but I would feel that way with any case.
I recommend the otterbox commuter. The screen has totally protection and you have access to the curved edges..
Also the nice thing about it us the hard plastic backing reinforces the sidewalls so they cant flex during a drop.
Alot of cases i tried were very flimsy mid screen along the sides, this one is firm
Sent from my SM-N930T using Tapatalk
What Tech21 model is that?
nygrik said:
Tech 21 was expensive in the Att store but it raises around the edge slightly to make it slightly raised when face down...its a decent case but I'm still paranoid of glass shatter if it falls face down but I would feel that way with any case.
Click to expand...
Click to collapse
Can you specify the exact model and how much is "slightly"?
dermotti said:
I recommend the otterbox commuter. The screen has totally protection and you have access to the curved edges..
Also the nice thing about it us the hard plastic backing reinforces the sidewalls so they cant flex during a drop.
Alot of cases i tried were very flimsy mid screen along the sides, this one is firm
Sent from my SM-N930T using Tapatalk
Click to expand...
Click to collapse
Before I buy a pink case (ughm, where is the blue guys), how raised is the case along the edges?
i believe this is the case you're looking for....
it makes your note7 look like it has a flat screen, covers up the edges, and all that jazz.
https://www.youtube.com/watch?v=MjszkH8tHV0
I doubt people want a case that makes their screen look smaller.
notefreak said:
I doubt people want a case that makes their screen look smaller.
Click to expand...
Click to collapse
The case I linked in a post above does not make the viewable part of the screen smaller. The edges of the case go straight up, not overlapping the curved edges, just higher than them and higher than the display, even a display with a tempered screen protector. I have been using this case for a week now and can highly recommend so far. Here is the link again if you want to look at it for yourself:
https://www.amazon.com/gp/product/B01INA04A4/ref=oh_aui_detailpage_o01_s01?ie=UTF8&psc=1
teegunn said:
The case I linked in a post above does not make the viewable part of the screen smaller. The edges of the case go straight up, not overlapping the curved edges, just higher than them and higher than the display, even a display with a tempered screen protector. I have been using this case for a week now and can highly recommend so far. Here is the link again if you want to look at it for yourself:
https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1
Click to expand...
Click to collapse
Your link doesn't work for me.
I have skimmed through the pages in the other tempered glass screen protector threads. I have yet to find a manufacturer who makes an edge to edge protector that adheres to the entire screen rather than just the top and bottom.
My issue is that with a water proof device, anytime it is exposed to water (every day for me as I place it on the shelf in the shower to listen to music), water becomes trapped underneath the tempered glass.
Anyone picked up a model that would remedy this?
no one currently makes one
Why did you feel the need to open a whole new thread for something that has been discussed at length in many other threads? no, there is no solution yet.
Doesn't the official Samsung one do this ?
The official Samsung one is plastic, not glass.
The official Samsung one is not tempered glass.
I strongly advice against getting curved tempered glass. Or any screen protector with curve protection.
I got my replacement Note 7 and I decided to just use a flat film protector and leave the sides exposed. So much easier to use this way.
which flat one did you get!
Sent from my SM-N930T using Tapatalk
BozQ said:
The official Samsung one is not tempered glass.
I strongly advice against getting curved tempered glass. Or any screen protector with curve protection.
I got my replacement Note 7 and I decided to just use a flat film protector and leave the sides exposed. So much easier to use this way.
Click to expand...
Click to collapse
I went nude screen on the explosive n7 because i knew i was going to exchange it and i only managed to get one scratch and it was on the edge. I think i know how it happened.
Be careful
BozQ said:
The official Samsung one is not tempered glass.
I strongly advice against getting curved tempered glass. Or any screen protector with curve protection.
I got my replacement Note 7 and I decided to just use a flat film protector and leave the sides exposed. So much easier to use this way.
Click to expand...
Click to collapse
It feels like **** though. I had an IQ Liquid Shield on my old Note 7, and it felt nice in the hand. Barely a bump in feeling, some around the edges but not really noticeable. This current new Note 7 has factory screen protectors, both front and back. But they feel sharp and edgy, they don't cover the curves. I have actual sleeping nightmares about applying a brand new IQ Liquid Shield protector I already have, and it peeling horribly at corners. fEa.r me..?
Yeah. So I got my replacement n7 today. Picked up a Qmadix "first defense" screen protector. Guess what? It's edge to edge and the adhesive goes all the way around the screen. Just got out of the shower (phone got soaked), no water under the glass.
There is no reason to be rude.. Obviously, the other threads "discussed at length" on the subject failed to stumble upon this gem.
Thanks everyone. I'm only 5 hours in but I have no complaints. No halo, sits flush. Thicker than the Verizon branded one I had previously. Has kind of a unique cut out for the Samsung logo. I also purchased a camera, hearbeat sensor, and home button glass.. I'm set lol.
Edit: forgot to mention the Qmadix also comes in all three colors. I purchased black respectively.
filthimoney said:
Yeah. So I got my replacement n7 today. Picked up a Qmadix "first defense" screen protector. Guess what? It's edge to edge and the adhesive goes all the way around the screen. Just got out of the shower (phone got soaked), no water under the glass.
There is no reason to be rude.. Obviously, the other threads "discussed at length" on the subject failed to stumble upon this gem.
Thanks everyone. I'm only 5 hours in but I have no complaints. No halo, sits flush. Thicker than the Verizon branded one I had previously. Has kind of a unique cut out for the Samsung logo. I also purchased a camera, hearbeat sensor, and home button glass.. I'm set lol.
Edit: forgot to mention the Qmadix also comes in all three colors. I purchased black respectively.
Click to expand...
Click to collapse
Other threads didn't find this so called gem of yours, then mention it there, that's the whole point of the original tempered glass thread. To discuss solutions. Not make a new thread for the EXACT same thing. It's just annoying to have multiple threads for literally the exact same topic. Surely you get that.
Anyway. Do u have any photos or share so we can see how it looks?
Sent from my SM-N930F using Tapatalk
Not sure if anyone has seen this yet, I don't know if it is full adhesive or not...... http://zerolemon.com/product/case-f...-for-samsung-galaxy-note-7-lifetime-warranty/
probably not full adhered.
Snowleopard1900 said:
Not sure if anyone has seen this yet, I don't know if it is full adhesive or not...... http://zerolemon.com/product/case-f...-for-samsung-galaxy-note-7-lifetime-warranty/
Click to expand...
Click to collapse
i tried dozens of them looks just like that, most of them only have adhesive on the sides or the top+bottom. all returned.
i suspect this one will be the same, but its not available to purchase on Amazon yet. Guest i will try this too.
i will report see how it goes. but i have no hope at all.
case friendly and curved too on the design like that..?? dont know thats legit or not.
This will work 100%, even my case won't peel the screen cover.
http://imgur.com/a/sq0n5
https://amzn.com/B01HN2T6YI
you must get this specific version for the full cover. there's a lot of different variations. also let the film completely dry before you even attempt to wrap down the sides. you can use your palms, squeegee, and blow dryer. Remember the water spray is only for help with placement. When this film dries, its very stick and adhesive.
i just hate TPU material, its spongy, soft, leaves imprints and a weird texture. but it does full cover. tempered glass and PET film will never do that.
chillsen said:
This will work 100%, even my case won't peel the screen cover.
http://imgur.com/a/sq0n5
https://amzn.com/B01HN2T6YI
you must get this specific version for the full cover. there's a lot of different variations. also let the film completely dry before you even attempt to wrap down the sides. you can use your palms, squeegee, and blow dryer. Remember the water spray is only for help with placement. When this film dries, its very stick and adhesive.
i just hate TPU material, its spongy, soft, leaves imprints and a weird texture. but it does full cover. tempered glass and PET film will never do that.
Click to expand...
Click to collapse
Your case doesn't even go around all the edges.
borijess said:
Your case doesn't even go around all the edges.
Click to expand...
Click to collapse
the sides of the case overlap the screen protector with zero lifting. it would obviously work the same way for any case, even those that cover the top and bottom
chillsen said:
the sides of the case overlap the screen protector with zero lifting. it would obviously work the same way for any case, even those that cover the top and bottom
Click to expand...
Click to collapse
I have the same protector updated version on my note 7. Did the shrink wrap trick too when i applied it. Came out nice after 12hrs. Once I put my UAG case it started to lift edges. I had to use a credit card to slide case phone in without lifting edges. So I thought I was all good right. Nope a day later it started to lift on the top side and bottom side. I have to smooth it back to down continuously. So either you got lucky or you case does not life the edges.
borijess said:
I have the same protector updated version on my note 7. Did the shrink wrap trick too when i applied it. Came out nice too. Once I put my UAG case it started to lift edges. I had to use a credit card to slide case phone in without lifting edges. So I thought I was all good right. Nope a day later it started to lift on the top side and bottom side. I have to smooth it back to down continuously. So either you got lucky or you case does not life the edges.
Click to expand...
Click to collapse
maybe it was the way you put it on? as in one side you will comfortable be able to tuck it under but the other side kinda snapped on and slid/lifted the cover in order for the case to snap on?
mahdibassam said:
Other threads didn't find this so called gem of yours, then mention it there, that's the whole point of the original tempered glass thread. To discuss solutions. Not make a new thread for the EXACT same thing. It's just annoying to have multiple threads for literally the exact same topic. Surely you get that.
Anyway. Do u have any photos or share so we can see how it looks?
Sent from my SM-N930F using Tapatalk
Click to expand...
Click to collapse
Not sure if you found it yet, but here is the screen protector he was mentioning. Got good reviews (from a handful of people so far) but is pretty pricey at $35 U.S.
ohblindone said:
Not sure if you found it yet, but here is the screen protector he was mentioning. Got good reviews (from a handful of people so far) but is pretty pricey at $35 U.S.
Click to expand...
Click to collapse
Just installed this. I think i know why most companies only use glue on the top or bottom. The quality of the product is good. The packaging is great but i would rather get something a little more simple and maybe save on the cost.
I have yet to turn on my replacement N7 so i cant speak on clarity but the fit is decent. It even works with my Seidio Dilex case on even though its "full screen"
Here is my one problem so far (its only been an hour since install) there is a slight clicking sound when you press on some areas. The edges etc. This is the reason why i think most companies dont use glue on the sides. I think this is where the clicking sound is coming from. I think i installed it as best as i could but who knows. Maybe its my fault.
Im going to try to use it for a while to see how well it works and if i can stand the clicking sound. This is my 1st glass screen protector for the N7 and i dont think ill try more in the future. I just wanted to try one out.
Now that people are starting to receive their phones and accessories from OnePlus, I am very curious to hear people's thoughts on the official tempered glass protector offered from OnePlus.
Specifically, how does it fit with the OEM cases OnePlus offers. Most importantly, does it fit with the thicker OnePlus Bumper cases?
The good news, according to OnePlus's official install video posted on their website, it does look like it fully adheres to the screen.
https://www.oneplus.com/oneplus-6-3d-tempered-glass-screen-protector
Looking forward to feedback before I place an order for one to potentially replace the pre-applied plastic screen protector.
sn0warmy said:
Now that people are starting to receive their phones and accessories from OnePlus, I am very curious to hear people's thoughts on the official tempered glass protector offered from OnePlus.
Specifically, how does it fit with the OEM cases OnePlus offers. Most importantly, does it fit with the thicker OnePlus Bumper cases?
The good news, according to OnePlus's official install video posted on their website, it does look like it fully adheres to the screen.
https://www.oneplus.com/oneplus-6-3d-tempered-glass-screen-protector
Looking forward to feedback before I place an order for one to potentially replace the pre-applied plastic screen protector.
Click to expand...
Click to collapse
I don't get my phone until later today, so I can not confirm until then. But the two different customer service reps I talked to guaranteed the TGP works with the OEM bumper cases. They said the only case it isn't compatible with is the outterbox case.
suprstar29 said:
I don't get my phone until later today, so I can not confirm until then. But the two different customer service reps I talked to guaranteed the TGP works with the OEM bumper cases. They said the only case it isn't compatible with is the outterbox case.
Click to expand...
Click to collapse
Looking forward to your results! If it does fit with the OEM bumper case (specifically the Nylon bumper case for me) I'll use my $20 promo voucher to order the glass protector as well.
I will say the preapplied plasic protector surprised me.wkth how good it feels. I usually do a glass protector but once I get my I will probably leave the plasitc on to see how it wears. Be good for the long term review since most on even know it's there at first
Sent from my Pixel 2 using Tapatalk
Here take a look at this. I''ve just posted it to the official forums to I'll C+P here;
----
Hi all,
Hope you've not forgotten me! I'm back. I went down to the London launch as I was super excited to see the OnePlus 6 in person and I've now got my hands on the phone and the official tempered glass. So as I have done every year, I'm going to be testing out as many accessories that I can get my hands on, starting with the Official Tempered Glass Screen Protector!
Feel free to watch the video to get all this information, or just scroll down and read it if you prefer!
Some of you wonder why take of the pre-applied factory screen? Well for me, it's all about finding the best protection for your device and from experience the pre-applied screen is not that. It's a nice bonus, as if you're not buying the official you'll have to wait around a week or so before third party manufacturers get screens ready for sale. Mine was also riding slightly high on the screen, which meant using it whilst having gestures turned on was a bit of a nightmare.
As usual the screen protector, comes well packaged, with some excellent tools- most of which you won't need if you're taking the pre-applied screen off and then putting this one on straight away.
The screen protector as with the last few years comes on a single slab of plastic/glass, which you will need to be careful off when you're removing the screen protector from it. I've seen many people CRACK their screen protector at this point. Don't be that person! Go slow, but surely. And for goodness sake once you've peeled it off, don't turn it around and let all the dust particles in your house get on it!
The screen protector fits nicely on the phone and feels pretty decent. High quality!
Postives -
- Feels good
- Looks good
- Fits with the free case
Negatives -
- Finger print magnet - seriously, had it on for a few minutes and it was covered.
- Still has the black border, so you DO still get a 3D effect where you're missing an (admittedly small) portion of your screen
- Hardest OP screen protector I've ever put on.
Let me know if you have any questions on it, and I'll endeavor to keep you all updated on how it functions!
Thanks!
^ Dang! I can't believe how difficult it was for him to remove the bubbles with that protector. And in the end it still had a bubble that kept returning. This sure did make me glad I opted not to pay extra for that tempered glass protector. It's almost as if it doesn't have strong enough adhesive.
Regardless, I plan on sticking with the pre-applied screen protector for a bit before making a decision on a glass protector. In fact, if the pre-applied protector holds up well, I may not ever bother taking it off. I must say that it would be really nice to finally get a phone and never even worry about spending money on a screen protector, or trying to perfectly apply one, for that matter.
I just hope my pre-applied protector isn't positioned too high, as the above video reviewer mentioned his was.
unfortunately my preapplied screen protector is a tiny bit too high for my taste too, so when swiping up with gestures enabled you can feel the slight edge :/
I really hope whitedome is going to bring a TGSP for the OP6 on the market
niijonodhg said:
Here take a look at this. I''ve just posted it to the official forums to I'll C+P here;
----
Hi all,
Hope you've not forgotten me! I'm back. I went down to the London launch as I was super excited to see the OnePlus 6 in person and I've now got my hands on the phone and the official tempered glass. So as I have done every year, I'm going to be testing out as many accessories that I can get my hands on, starting with the Official Tempered Glass Screen Protector!
Feel free to watch the video to get all this information, or just scroll down and read it if you prefer!
Some of you wonder why take of the pre-applied factory screen? Well for me, it's all about finding the best protection for your device and from experience the pre-applied screen is not that. It's a nice bonus, as if you're not buying the official you'll have to wait around a week or so before third party manufacturers get screens ready for sale. Mine was also riding slightly high on the screen, which meant using it whilst having gestures turned on was a bit of a nightmare.
As usual the screen protector, comes well packaged, with some excellent tools- most of which you won't need if you're taking the pre-applied screen off and then putting this one on straight away.
The screen protector as with the last few years comes on a single slab of plastic/glass, which you will need to be careful off when you're removing the screen protector from it. I've seen many people CRACK their screen protector at this point. Don't be that person! Go slow, but surely. And for goodness sake once you've peeled it off, don't turn it around and let all the dust particles in your house get on it!
The screen protector fits nicely on the phone and feels pretty decent. High quality!
Postives -
- Feels good
- Looks good
- Fits with the free case
Negatives -
- Finger print magnet - seriously, had it on for a few minutes and it was covered.
- Still has the black border, so you DO still get a 3D effect where you're missing an (admittedly small) portion of your screen
- Hardest OP screen protector I've ever put on.
Let me know if you have any questions on it, and I'll endeavor to keep you all updated on how it functions!
Thanks!
Click to expand...
Click to collapse
Thanks for this! Your videos are always great when it comes to these things. Keep up the great work!
Do you think the bit the pops up might simply be just because of the curvature of the screen towards the corner?
(curved screened phones are always a nightmare when it comes to putting screen protectors on). If the underside of the screen protector is curved aswell in order to fit the curved screen of the device, even a fraction of difference can cause these kinds of problems, whereas flat ones you can even get away with them positioned slightly off, and they will always sit down perfectly flat.
Can you confirm whether the curvature of the OnePlus 6's screen is just around the edges, or is it the whole of the front that is actually curved?
(If you see what I mean).
I could be wrong, but from what I can see on the video, it does almost look like it's the whole screen that is rounded and not just the edges (but it's hard to tell from a video, so can't know for sure)
sn0warmy said:
^ Dang! I can't believe how difficult it was for him to remove the bubbles with that protector. And in the end it still had a bubble that kept returning. This sure did make me glad I opted not to pay extra for that tempered glass protector. It's almost as if it doesn't have strong enough adhesive.
Regardless, I plan on sticking with the pre-applied screen protector for a bit before making a decision on a glass protector. In fact, if the pre-applied protector holds up well, I may not ever bother taking it off. I must say that it would be really nice to finally get a phone and never even worry about spending money on a screen protector, or trying to perfectly apply one, for that matter.
I just hope my pre-applied protector isn't positioned too high, as the above video reviewer mentioned his was.
Click to expand...
Click to collapse
My pre-applied protector only lasted an hour on mine. The edges don't stick enough to avoid random lint and dust from sliding just a bit underneath it. Also the swipe up gestures from the bottom of the phone feel weird as you bump the protector. I'm not sure but I think it's because the protector is a bit thick.
Sent from my ONEPLUS A6003 using Tapatalk
jlczl said:
My pre-applied protector only lasted an hour on mine. The edges don't stick enough to avoid random lint and dust from sliding just a bit underneath it. Also the swipe up gestures from the bottom of the phone feel weird as you bump the protector. I'm not sure but I think it's because the protector is a bit thick.
Sent from my ONEPLUS A6003 using Tapatalk
Click to expand...
Click to collapse
That’s a shame. My phone arrives today and we leave for Mexico tomorrow for a week. I was hoping the pre-applied protector would be perfect. The edges of it are probably going to look like garbage by the time we get back.
the protective film, can not attach clean and then Euro 22, so I can not recommend. Shade for the money
unix2208 said:
the protective film, can not attach clean and then Euro 22, so I can not recommend. Shade for the money
Click to expand...
Click to collapse
What?
I really like the TGP. It fits seamlessly with the nylon case where the edges go all the way to the case and it feels completely natural. I thought the black outlining would bother me, but it works really well with the phone. I highly recommend the OEM TGP. No issues with it being compatible with the bumper case.
I have read on a Dutch forum that there is only glue on the edges of the screen protector. The middle is coated with some sort of oil so you won't see any bubbles.
This would explain the YouTube video with the corner not sticking. Could somebody confirm this?
This is a problem with all "curved edge" phones. Really makes me wish Samsung did not have as much sway in the market as they do. We would still have flat screens!
JCreations said:
I have read on a Dutch forum that there is only glue on the edges of the screen protector. The middle is coated with some sort of oil so you won't see any bubbles.
This would explain the YouTube video with the corner not sticking. Could somebody confirm this?
Click to expand...
Click to collapse
Sent from my Pixel 2 using Tapatalk
suprstar29 said:
I really like the TGP. It fits seamlessly with the nylon case where the edges go all the way to the case and it feels completely natural. I thought the black outlining would bother me, but it works really well with the phone. I highly recommend the OEM TGP. No issues with it being compatible with the bumper case.
Click to expand...
Click to collapse
More importantly, how difficult was it to get a bubble free install?
JCreations said:
I have read on a Dutch forum that there is only glue on the edges of the screen protector. The middle is coated with some sort of oil so you won't see any bubbles.
This would explain the YouTube video with the corner not sticking. Could somebody confirm this?
Click to expand...
Click to collapse
The tempered glass screen protector from OnePlus has adhesive throughout the entire protector, not just around the sides. Watch an install video and you'll see.
sn0warmy said:
More importantly, how difficult was it to get a bubble free install?
Click to expand...
Click to collapse
It wasn't to bad. There were a couple of stubborn small bubbles, but it you press and hold on them for a second or two with the included tool they go right away. I have a completely bubble free TGP that took maybe 2 minutes to put on
suprstar29 said:
It wasn't to bad. There were a couple of stubborn small bubbles, but it you press and hold on them for a second or two with the included tool they go right away. I have a completely bubble free TGP that took maybe 2 minutes to put on
Click to expand...
Click to collapse
Well crap. Now I wish I went ahead and ordered the protector with the phone. Now I've got to get through a week in Mexico with the pre-applied protector and hope it doesn't peel up until I get back.
Ordering the TGSP from OnePlus right now. Thanks for your input.
Just installed it and it looks great in my opinion! Wasn't that hard. If you apply it with the included case on, it helps a ton with lining it up; you literally just need to drop it into place.
I did get a couple pieces of dust underneath but they are super small and hardly noticeable, so I don't want to risk lifting the protector to remove it (risking more dust to get under) (or risking losing adhesion).
It does have a bit of that "3D look" but I got used to it very quick and now I don't notice it.
If there is text way at the edge of the screen, it does slightly get cut off but luckily most apps/websites don't have text that close to the edge.
Overall it's a solid protector and I'm probably going to stick with it until the end of its life (unless it cracks or something of course lol).