Related
Q&A for [ROM][4.4.x][OFFICIAL & NIGHTLIES][EDISON] MoKee OpenSource Project
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM][4.4.x][OFFICIAL & NIGHTLIES][EDISON] MoKee OpenSource Project. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Mokee: Problem with Call waiting, hang up and other in call tones
Context:
I use Moto Atrix 2 [edison] running MK44.4-edison-141019-RELEASE.zip
The following observation is from the day I installed Mokee in August 2014
I have similar experience with NIGHTLY ROMs as well. These versions use the modified dialer in google AOSP KitKat.
Problem:
My phone has an irritating tone for call drop/call waiting/ etc.
What I have tried:
I wanted to change the respective tones and hence was looking for .ogg or similar files in the system partition. I found media/audio/ui folder has some .oggs such as lock, unlock, etc. but nothing related to call hangup or waiting. There is no setting to disable the sounds as well.
After a little digging, (disassembling dialer.apk and incallui.apk and reading on the internet) I found that android does not use audio files for such sounds. Rather uses a C++ library to generate sinewaves based on given frequency and duration.
ToneGenerator.java, ToneGenerator.h, ToneGenerator.cpp are crucial in generating these tones. When I compared these files in ICS and Kitkat, i hardly found any changes. (I did not have this problem with Stock ICS)
Later I realized, this problem happens only during a call. e.g the above files also control the DTMF tones of the dial pad. When idle (no call connected), dial tones sound proper. But when in a call and I try to use the dial pad, the same horrible sound is played. This horrible sound is like a very slowed (slow tempo) version of the original tone.
This leads me to believe there is some problem with the incallui (or the section of dialer handling incall events) which probably uses a lot of resource: hence slows down "ToneGeneration" .
I have also tried changing the final variable MAX_VOLUME in ToneGenerator.smali (after disassembling framework.jar) to 50 percent, but it dint lower the volume.
Other Mokee users, please check if you have this problem.
Any idea how I can fix this or atleast change the volume to 0.
Any help would be appreciated.
SD Card issues
Still facing SD Card issues on system 1.
Just take over an old atrix 2 and am very happy to see there're still continues update with the system that keep the phone's mind young Thank you so much.
Mokee site?
Is the Mokee site down? I haven't been able to access it.
Atrix 2 Problem while installing Mokee 4.4.2 ROM
Hi Guys,
This is my 1st post on the forum.
Last week i tried to install Mokee 4.4.2 in my atrix 2, but the installation didn't complete. Mokee ROM was installed Successfully but Google apps installations crashed. So technically my phone got Bricked. The Pre installed ICS is not their now and neither i can use any ROM manager. Because When i tried installing the ROM for the 2nd time so as per the guidelines i had to wipe the data and cache files.
Please tell me how should i install a ROM now .?
The Reference link that i followed for the Mokee ROM installation and MOkee & Gapps files was some ravi rajini ravi blog
Any Possibilities for lollipop for atrix 2
hello guys Any Possibilities for lollipop for atrix 2?
ANDROID OS drain issue
hi . first of all thanks for keep this updated.
since i installed MOKEE 4.4.4 on system 1 i'm having a big battery drain from Android Os. thats getting even more battery than Screen.
sorry for my english!
Is the same on all kitkat roms. Try Save Power in battery settings, or turn off location , google now , wifi etc. The best solution for me was to get a Motorola extended battery.
thats right
Hallo!
MK50.2-edison-201502030337-NIGHTLY.zip - Error "Status 6".
The second error for 2 days? Why then spread wrong or mistake as they check before you upload to the network?
Status 6 Installation Aborted in mokee 5.0.2 201502040445
hello guys i m try to install new nightly from mokee website but its give error code 6
i m flashing using bmm in my atrix 2
anyone find the solution?
Please do not install lollipop rom's with BMM !!
We don't have any custom recovery to flash any Lollipop ROM yet !!
Have some patience and wait for recovery !!
Q&A for [ROM][4.4.4][10/13][OFFICIAL] GzRoms -Validus- [6.2 Testing][Falcon]
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM][4.4.4][10/13][OFFICIAL] GzRoms -Validus- [6.2 Testing][Falcon]. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
update
So how do i update this rom im on 4.4.4l version 6.1 moto g and are u guys going to make one for android l just wondering love this rom best one ive had for this device
about validus
in case the maintainer finds this post, testing the latest milestone (6.2) on falcon (moto g, european version), found a few bugs :
- the setting to disable wifi in profiles and power saving mode for the battery (in the void options) is just ignored. When disabling wifi manually, it comes back everytime I exit the lock screen (maybe it's because of another setting but I couldn't find it).
- in sound option, music effects shows viper audio. When clicking on it, it proposes to install its driver automatically. Except that it doesn't work, since there is no log it's hard to know why. I tried the 3 proposed driver, to reinstall busybox (from the playstore), nothing worked.
- And the touch screen suddenly stopped working in 1 situation, I don't know why. I received a mail, when I tried toclick the screen it didn't work, and I couldn't use the touch screen anymore even after puting the phone to sleep and wake it up again, so I had to do a hard reset (power button pressed for a few seconds).
I'll try to keep on using it, but if the touche screen bug comes back I guess I'll have to do something... maybe try another kernel then, it seems related to the kernel...
http://forum.xda-developers.com/showpost.php?p=57054547&postcount=112
This 6.2 MS is built with what version of DK kernel? 1, 1.1 or 2?
Everything else works fine atm.
request
I just want to say that i have been using this rom as my daily driver since 2 days. no major bugs..
just wanted to request that the theme of the settings app should be changed back to the material white again. thank you
I'm using validus 5.0.2, build date says Jan 1. I noticed in a post you said you added the option to change nav bar dimensions, but I don't see it anywhere. Also "performance" under settings is empty.
I guess the questions asked here are of so little importance they don't deserve to be answered...
Can't post screenshot.
Groups still themed white text on white BG.
Rom, gapps, kernel so anything else I forgot to install apart from these?
Boost xt1031
Are You Going To fix Moto G xt1031 CDMA Data, Calls And Text Soon?
I just flashed latest build 1/14/2015 but WiFi not turning on pls help meh alone with ROM I flashed su and donkey kernel nothing helped meh
no Pie control in new build ?
Moto g consumer cellular xt1034 lollipop
anyone please let me know, I have MOTO G CONSUMER CELLULAR XT1034 UNLOCKED Device can i install original LOLLIPOP for my device (NOT ROM)
dracula1520 said:
no Pie control in new build ?
Click to expand...
Click to collapse
The latest build does have pie control, and I love the look of it. Although, I can't figure out how to configure 2nd layer buttons.
Boot loop
Hi guys,
thanks for this ROM but...
I can't understand.... is it for xt1032?
Cause I tried to flash latest build (v7.0) and it stucks on the boot logo... waited for 20 minutes...
any suggestions?
in latest build I cant find PIE controls. Maybe you forgot to include them? Apart from that thanks validus team for this awesome rom! Yesterday I made the jump from milestone 6.2 to lollipop and I am impressed
@koradiavatsal
Just reporting...
Bootloop after flashing the latest version with or without gapps.
koradiavatsal said:
A new test build
This will probably boot. Please confirm
Click to expand...
Click to collapse
@koradiavatsal Yup, boots all right!
@koradiavatsal I've just downloaded the latest version, I'll report back ASAP.
[Q&A] [ROM+KERNEL] [UNOFFICIAL] [5.1] Euphoria-OS 1.1 w/ 3.4.0 CAF Kernel [June 14]
Q&A for [ROM+KERNEL] [UNOFFICIAL] [5.1] Euphoria-OS 1.1 w/ 3.4.0 CAF Kernel [June 14]
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM+KERNEL] [UNOFFICIAL] [5.1] Euphoria-OS 1.1 w/ 3.4.0 CAF Kernel [June 14]. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
thanks
Thank you for your efforts, but when using headphones when the volume can not be controlled, and CPU locked my opinion is not a correct decision.
DQin said:
Thank you for your efforts, but when using headphones when the volume can not be controlled, and CPU locked my opinion is not a correct decision.
Click to expand...
Click to collapse
1. try to reboot
2. you can underclock it by flashing a zip
Question regarding kernel settings
How do i change settings like increase the volume on headset, speaker, etc or speedup charging from usb from default to 1000mah, etc? do you have any apps to take care of this or not.. will i be able to use synapse to make these changes.?
No questions are being answered i guess, so I'll be moving out of a very good but unsupported rom
Changelog?
Hi, good job, I'm very satisfied by your ROM. Can I ask where is the changelog ? thanks a lot
Anyone else have proximity sensor issues on 7/19 build? Mine is not working during calls.
gio92 said:
Hi, good job, I'm very satisfied by your ROM. Can I ask where is the changelog ? thanks a lot
Click to expand...
Click to collapse
Changelog to the fixes to the device and kernel trees can be found here.
As for Euphoria-OS changes, that can be found in the OP for the official Euphoria-OS or on their Google+.
Kernel
Anyone have an opinion with render kernel vs this kernel ?? How's it going for you guys, loving the rom tho never had such a smooth and lagfree experience
Any issues with a dirty flash with the latest version (0905) from the previous one (0824) ?
---------- Post added at 11:16 PM ---------- Previous post was at 10:47 PM ----------
Compass still not working with the version 5 September.
I don't know why "xender" app crashed every time when I tried to choose a file for sending.
Bo problem in other roms.
I would like to provide a logcat but my pc has broke. Sorry for this.
Calendar Sync Issue
Hey,
I am having an issue with getting Google Calendar to Sync.
I have seen it mentioned before, but had no luck after I uninstalled the system calendar and reinstalled Google's Calendar from the play store.
Are there any other solutions?
torch problem
when i draw a V to toggle flashlight ,if i turn on the screen ,i just cannt toggle it off until i reboot the phone
Any chance to see a fix on the compass very soon on the release of @ak or @CraZY_BoY^
CraZY_BoY^ said:
1. try to reboot
2. you can underclock it by flashing a zip
Click to expand...
Click to collapse
Perfectly smooth, but began to become complicated, and an imperfect call, expect update
I just flashed the latest build, but I'm experiencing a problem: the menu long press button assignment doesn't work. I set it to long press for recent apps and it worked for a little bit, but then i restarted the phone and it defaults to in-app search. But it still says its set to recent apps switcher. Now it won't work at all and only does in-app search when it's set to recents.
When I remap other button options, they work fine. It's just the menu button option that isn't working. Long press or short press.
Does anyone know how to get past the TrustZone updater error when attempt to flash this (or any ROM) ROM? I updated my firmware/modem to the newest not realizing I would run into flashing issues. Thanks!
I have a few firmware files and flashed them all before the rom because I wasn't sure if new updates include the old ones or not haha. I have a oxygen os firmware update, the one in the original post, and one from Sept. Hope this helps
Once you get it flashed let me know if you have the menu button remap problem too please
I flashed sultans rom to see if it helped with my menu button problems and it did until I restored Bluetooth pairings from an older nandroid backup. After restoring the menu button wouldn't work right in that rom either. So I restored my newest Bluetooth pairings and it works again. I'm guessing that was my problem with this rom too in case anyone else has this problem
Hi to all!!
Which is the Pie's ROM more complete & stable for OPO actually?
All the pie ROM ( POSP, Pixys , ArrowOS and Tuga) available are stable now. And a thread is already available on your same topic. Kindly search thru forum before starting a unwanted thread. Pleade delete this thread.
The question was for a Version 9 In this moment, the most of customer version are still beta (with version 9) or didn't start / released a bind public. From my personal view : try one of the first version which is available or still stay on Oreo and read the comments, where you can get an overview if the version ok for you or not.
Which an older phone, I was living with a GPS Bug several years... It's your choise
i would say use Arrow for this reasons:
1- it's the stablest
2- doesn't have Video playback issue as some users have got on other roms
3- gives a good SOT
Dear Fellow Whyred Users,
I am opening this thread to discuss and get views from you in terms of a Stable & Least Buggy ROM (+ kernel) for Whyred 4GB/64GB device
It is more like an on-going discussion so that all can refer to and ask/share queries/comments/feedback and hence putting in this forum and not in Q&A.
Now to allow focussed discussion sharing some baseline requirements
1) By stable means - no random reboots, no crashes, should be good for daily use with Google Apps, GCam etc
2) Least Buggy - may be some small bugs here and there but should be known in advance (if see that these days for all Custom ROM bugs list is blank even when there are few known bugs reported & hence clearly known)
3) It's OK if the ROM is not having the latest security patches (ideally should be updated) but the key requirement is having balanced (battery backup & performance)
Now, yes Custom ROM offers lot of benefits and it is a boon to come out of MIUI trap as well as allows us to experiment and experience new features. But then it does break a few things here and there and also brings uncertainties.
So, for this thread, ok to even share experiences with MIUI (obviously modded one with all ads/****s removed) as well as the whole plethora of Custom ROM.
Request fellow users to share their experience with at least the following details:
ROM Name & Build Date:
Custom kernel Name & Build Date (if any):
Using Since:
Bugs if any:
Concerns if any:
Overall experience:
Reserved 1
Example for sharing your experience of ROM , pls quote this thread and edit !
PS: Mine is not a recommendation as not happy
ROM Name & Build Date: Xiaomi.eu Stable 10.3.4 (Android 9)
Custom kernel Name & Build Date (if any): Agni Kernel v8.7 Stable EAS
Using Since: May 2020
Bugs if any: None observed
Concerns if any: Lately phone seems very slow, performance below par. Reboot/clean cache helps for few days but again same problem
Overall experience: xiaomi.eu has been a good ROM for last 1.5 years, but with latest build seems to be an issue. Will try fresh format once, else change
Calling out fellow users to spare a few minutes and share their thoughts
@mGforCe @SunilSuni @!codelocker! @Renz1er @zdsvub @Sidgup1998 @Mysteryagr @Weeny1992 @Harry_00s.HS @laska.levin @Cordobes21 @rahimali @drnightshadow @Cirra92 @jokerpappu
Oxygen OS is pretty stable..
NavodLowe said:
Oxygen OS is pretty stable..
Click to expand...
Click to collapse
Thanks, can you pls elaborate a bit more in terms of 4-5 queries below. Helps in having a broad overview, TIA
ROM Name & Build Date:
Custom kernel Name & Build Date (if any):
Using Since:
Bugs if any:
Concerns if any:
Overall experience:
@mGforCe
I was recommended to use PixelExperience which was the first and only custom ROM I have flashed so far since unlocking the bootloader (I only acquired the phone last month). I went with the Pie version of the ROM,
PixelExperience_whyred-9.0-20191211-2037-OFFICIAL
Stock kernel (the one that came with the ROM), no random reboots, no problems, no issues whatsoever.
I might one day or some day flash Omni / Paranoid since I'm a big fan of both and have used them over the years. Maybe you could try those?
@mGforCe
ROM Name & Build Date: Xiaomi.Eu Beta 20.3.26 (Android 9)
Custom Kernel Name & Build Date: Using Stock Kernel (perf 4.4.153-perf+)
Using Since: March 2020 (Since Date of Release)
Bugs: None
Concerns if Any: Well u cannont Run WCC2 Game if its downloaded from another website (other than play store)
Overall Exp.: I've been using Eu ROM Since january 2020 and i haven't seen that much stable ROM till now. Even the MIUI 12 Beta builds are not that stable (They have high RAM Usage). I will strongly recommend this ROM For the best MIUI 11 Exp.
Peace
@mGforCe
ROM Name & Build Date: MIUI 10 [xiaomi.eu Beta 9.9.3] (Android 9)
Custom Kernel Name & Build Date: Stock Kernel (perf 4.4.153-perf+)
Using Since: September 2019 (Since Date of Release)
Bugs: Completely Stable
Concerns if Any: None so far, in nearly 1 year time.
Overall Exp: This has always been my go to ROM, when I want the perfect balance between performance and battery backup (seen last 8 hours of SoT and 40 hours of standby on it)
-- 1 -- One of the biggest reason why I never switched to MIUI 11, was because it was basically MIUI 10 with some extra tidbits that I could live without. The extra animations and updates just made the whole thing slower and consumed more RAM. For me, MIUI 10 last beta does the job perfectly. Good battery life and spare RAM (1.4-1.5 / 3.0 GB).
MIUI 12 has some major animation issues and spare RAM drops to 0.9-1.1 / 3.0 GB; would not advice anyone to update to that version. Waiting for RevOS [MIUI 12 Android 10 port] to get a bit more stable, might switch to that; as they seemed to have a good RAM management.
-- 2 -- I tried out Havoc, Pixel, Lineage and Corvus. Out of all the 4 ROMs; I'd say Corvus is pretty good. Havoc is nice and refined, but in terms of features, Corvus is the better one. But, what stops me from switch to custom roms is the battery life and slight heating issues. It might be due to kernels, but compared to MIUI 10's 5-6% battery consuption, custom roms eat up around 14-15%. Plus, during idle load, MIUI 10 drops down to as low as 32 C while lowest I seen on Corvus was around 35-36 C. They might have gotten better. Might need to test them out again before I can give a final say on it.
-- 3 -- After using MIUI, you get used to few sweet features it offers. Few of them were the volume panel, per app network settings, the app auto start control toggle and lastly the recent app menu. Paranoid Android did a wonderful job of bringing the first 2 feature to custom stock roms; sadly the other two features still remain unavailble. Hopefully someone will be able to create those.
Renz1er said:
@mGforCe
ROM Name & Build Date: MIUI 10 [xiaomi.eu Beta 9.9.3] (Android 9)
Custom Kernel Name & Build Date: Stock Kernel (perf 4.4.153-perf+)
Using Since: September 2019 (Since Date of Release)
Bugs: Completely Stable
Click to expand...
Click to collapse
Thanks @Renz1er for the detailed feedback, very helpful.
Few questions if you may answer:
1) Did you try any subsequent build of Xiaomi.eu MIUI 10 betas and still found this best? Or you never tried any further MIUI 10 or MIUI 11 because of info about extra RAM consumption?
Reason for asking because fellow user @Sidgup1998 suggested Xiaomi.Eu Beta 20.3.26 (MIUI 11) and so checking.
2) Further, you mention RevOS and so checking if you tried any other MIUI Mods like MiRoom etc?
I also googled and found one Official RevOS - tried anytime? ROS-MIUI_RedmiNote5_20.2.26_v11-9.zip
The problem (probably biggest) I've faced with Corvus Os is the mobile data connection. Sometimes if u disconnect and then reconnect, it won't connect until u restart/ Change network type 4g/3g/2g (I used this method).
Otherwise Best Aosp Rom is Corvus as it has my favourite One Plus Navbar Option
mGforCe said:
Thanks @Renz1er for the detailed feedback, very helpful.
Few questions if you may answer:
1) Did you try any subsequent build of Xiaomi.eu MIUI 10 betas and still found this best? Or you never tried any further MIUI 10 or MIUI 11 because of info about extra RAM consumption?
Reason for asking because fellow user @Sidgup1998 suggested Xiaomi.Eu Beta 20.3.26 (MIUI 11) and so checking.
2) Further, you mention RevOS and so checking if you tried any other MIUI Mods like MiRoom etc?
I also googled and found one Official RevOS - tried anytime? ROS-MIUI_RedmiNote5_20.2.26_v11-9.zip
Click to expand...
Click to collapse
-- 1 --
I tried out almost every single beta build and stable build for MIUI 10, and this one particular seems to hit the sweet spot. In terms of features offered from MIUI, performance and stability.
For MIUI 11, I just tried few earlier beta builds and some one of the stable builds. They were stable, but like I said, the ram usage and a bit more system animations kept me away.
For MIUI 12, I tried the very first beta build and the last beta build, both had bugs and issues.
-- 2 --Tried Xiaomi.EU Android 10 Port, Masik X Android 10 Port and RevOS Anroid 10 Port. All 3 of them are more of less very similar, just RevOS has bit more free space because it removes a few of MIUI system apps and a bit more free RAM compared to official Android 9 MIUI 12.
But the main issues with these ports are higher temperature, battery backup being a bit worse and the camera libs might not be whyred's so might see a bit degradation in quality.
Renz1er said:
-- 1 --
I tried out almost every single beta build and stable build for MIUI 10, and this one particular seems to hit the sweet spot. In terms of features offered from MIUI, performance and stability.
...............................
Click to expand...
Click to collapse
Thanks for the detailed revert. Clearly noted cons of going with MIUI 11 and MIUI 12
Now, coming back to MIUI 10, what I gather is that xiaomi.eu beta 9.9.3 is essentially last best of MIUI 10 and then the next weekly beta takes to
MIUI 11
Basis same, I tried searching a bit and came across two further ROMs : Mi-Room and Revolution OS
They both having beta builds, my guess based on same last MIUI 10 weekly beta, the release time is closeby to xiaomi.eu (beta 9.9.3)
xiaomi.eu_multi_HMNote5Pro_9.9.3_v10-9.zip 2019-09-05
Mi-Room RedmiNote5_MIUI_9.9.3_MiRoom_9.0.zip 2019-09-06
ROS-MIUI_RedmiNote5_9.9.21_v10-9.zip 2019-09-11
So, was wondering if worth trying anyone of them?
Also nowhere I see any comparison of Mi-Room vs Xiaomi.eu vs RevolutionOS. Do you have any insights here?
I will suggest Pixel experience plus ROM
Build : June 13
Have been using it from last two days and it's pretty stable
I'm getting 7+ hours of SOT
Play Store is certified so no need to install magisk
Video recording is not working with included Mi Camera but you can resolve it by installing Google Camera
I'm Using Google camera 7.3
Omfg guys ... Can you find more unsupported and buggy ROMs??? ?
Did someone try official LOS 17.1 ???
Almost bug free some minors bugs but ROM is rock solid and you'll get weekly OTA.
Some pixlesh*t buggy ROM is not what my grany can use as sound is crapy as hell and others bugs (WIFI, 4g, volte, etc). I tried many of them except MIUI crapware, adware,etc ROMS.
And I always come back to LOS ROMs official or unofficial.
But on the end, decision is up to you.
Good luck and stay safe.
I've tried LOS, the main concern is the constant Signal Drops which ultimately lead to poor signal reception.
I am having these issues in the latest build ( 29/6)
That's why I always come back to MiUi
Sidgup1998 said:
I've tried LOS, the main concern is the constant Signal Drops which ultimately lead to poor signal reception.
I am having these issues in the latest build ( 29/6)
That's why I always come back to MiUi
Click to expand...
Click to collapse
Sidgup1998 said:
One problem i am facing is sim card error in Banking apps like Gpay,phonepe,paytm.
Whenever i try to register it says please insert sim card , looks like the number is not available,etc.
Anyone else facing the same issue?
(In recent eu builds)
Click to expand...
Click to collapse
Khmm, in almost every of yours posts on XDA forum you have always some weird problems and no one else have and can't be reproduce.... Last quote is from MIUI ROM thread.:laugh:
You are clearly doing something wrong. What firmware do you have? Did you clean install ROM ( advanced wipe -> system, data, cache, dalvik, internal storage)?
Is your persist partition OK?
How is your changing fingerprint going? :laugh: (under LOS 17.1 thread is your answer):good:
You can PM me and I'll try to help you to narrow down your problem. As I said official LOS 17.1 is the most stable ROM at the moment.
Note to all:
Try to avoiding gapps cr*pware. Use FLOSS stores like f-droid and if you still can't live without google spyware apps use Aurora Store (aka google store but its open source) from XDA lab apps store.
And I'm sorry for this off topic post :angel:.
Good luck and stay safe.
@drnightshadow my Eu problem was solved as the new feature implemented by Miui 12 was unknown (they by default changed the imei, simcard response to blank response) and many people were facing the problem
This was a common problem but people didn't knew how to describe
---------- Post added at 03:08 AM ---------- Previous post was at 03:06 AM ----------
Sidgup1998;82999619 [user=1393901 said:
@drnightshadow[/user] my Eu problem was solved as the new feature implemented by Miui 12 was unknown (they by default changed the imei, simcard response to blank response) and many people were facing the problem
This was the last problem I've faced with Eu rom(s)
Click to expand...
Click to collapse
The two roms I've always had a good time with on both my Osprey and whyred has been lineage os and aosp extended other roms which have more features eventually broke for one reason or another . Aosp extended is the perfect mix of features and stability
SunilSuni said:
I will suggest Pixel experience plus ROM
Build : June 13
Have been using it from last two days and it's pretty stable
I'm getting 7+ hours of SOT
Play Store is certified so no need to install magisk
Video recording is not working with included Mi Camera but you can resolve it by installing Google Camera
I'm Using Google camera 7.3
Click to expand...
Click to collapse
Thanks for your feedback. So PE+ Android 10 right? Overall you are happy here
minilandl said:
The two roms I've always had a good time with on both my Osprey and whyred has been lineage os and aosp extended other roms which have more features eventually broke for one reason or another . Aosp extended is the perfect mix of features and stability
Click to expand...
Click to collapse
Thanks mate for feedback. Can you share more details about AEX - which build, android version? Any bugs/issues observed etc?
Not so recent, but the best and most stable for me. Did try almost every whyred ROM from xda , and from other forums also. I always end up getting back to this one, specially when you like MIUI experience. Details attached.