Code:
*** Disclaimer ***
I am not responsible for nuclear war, your dog going hungry , also not for damage done to your device.
Introduction
This is my third grand release of my own Toolkit for the HTC One M9 and its several variations of its kind. This is a nifty exe that allows the user to complete most of the common ADB and Fastboot commands from unlocking the bootloader to sideloading ZIP files. Also that it provides a sleek and modern interface to download and check for recovery updates.
Drivers for ADB and Fastboot are also easily downloaded and installed on startup so you are ready to go and rumble with your new M9. Included in this project is an auto-updater that allows you to get the latest release of the toolkit that may improve performance, squash bugs or fix a potential threat to your phone!
Images
Latest Version 1.6.1:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Installation instructions
Download the .zip
* Extract HTC One M9 Toolkit 2.exe
* Run HTC One M9 Toolkit 2.exe (Requires .NET Framework 4.5)
Click to expand...
Click to collapse
Download
Project Link
Click to expand...
Click to collapse
Changelog
Code:
Current changelog: 3/07/2016
[note] Updated to 1.6.1
[new] Auto-updater
[changed] list location grabbing
Older changelogs:
Code:
Current changelog: 2/07/2016
[note] Updated to 1.6
[changed] Material/Metro UI
[removed] Auto-Updater
[new] Download and Flash TWRP
[new] Download and Flash SuperSU
Code:
Current changelog: 24/08/15
[note] Updated to 1.5
[new] Re-arranged download status
[new] Added new 'Getting Started' section
[new] Added new method of detecting if drivers are installed
[new] Check for updates button
[changed] Auto-Updater for the Toolkit
Code:
Current changelog: 15/07/15
[note] Updated to 1.4
[new] Downloads tab where you can download different goodies.
[changed] Link debug area
[changed] Removed manual commands input
[changed] Moved 'Uninstall HTC Sync' to 'About' tab
[fixed] Incorrect and damaging code.
Click to expand...
Click to collapse
FAQ
None ATM
Click to expand...
Click to collapse
XDA:DevDB Information
HTC One M9 Toolkit, Tool/Utility for the HTC One (M9)
Contributors
squabbi, k1ll3r8e, Sneakyghost, Captain_Throwback
Version Information
Status: Stable
Current Stable Version: 1.6.1
Stable Release Date: 2016-07-03
Created 2015-04-07
Last Updated 2016-07-03
Changelogs
Changelog (Latest to Oldest):
Latest changelogs in the first post!
Version 1.3.1
- Fixes issue for missing files.
- Fixes issue for version not showing properly.
...
Version 1.0.1
- Fixed Recovery Downloads
Version 1.0.0.0:
- Initial Release
Reserved
Reserved
Will try this out as soon as my device comes in. Thanks
Svid said:
Will try this out as soon as my device comes in. Thanks
Click to expand...
Click to collapse
Thank you! Let me know how it goes!
Squabbi mate good to see you here too. Aussi! Aussi! Aussi!
Sowhatyauptobro?
Sneakyghost said:
Squabbi mate good to see you here too. Aussi! Aussi! Aussi!
Sowhatyauptobro?
Click to expand...
Click to collapse
Haha! Nice gif! It's great to see you here as well!
As soon as I run the App the First time, it asks for Device type I select GSM.
It proceeds to download the Recoveries and adb.
i waits a few seconds the it just Bugs out. Log attached
I thought it was .net related so I updated it, it worked right after.
Thanx for all your work ..... this tool is great to have!! 1 thing though, when i fire it up first, it asks for phone type and I select AT&T. The download for recoveries took approximately 20 min. Is this normal? Now the second time I fired it up, it asked again what device and it is downloading the recoveries all over again. Is this normal for your tool? Is it something on my end?
Also, when I check for updates within your tool I get the following error....
wyUpdate exited prematurely
"The wyUpdate executable was not found: E:\......\......\M9Toolkit 1.0\Updater.exe"
The update exe is named wyUpdate.exe but the command is looking for Updater.exe.....
When I double click on the wyUpdate.exe I get "An error occurred" Here's the error...."Error trying to save file: Could not download "http://squabbi.square7.ch/toolkit/m9/updates/wyserver.wys" - a web page was returned from the web server."
Thanx in advance
IronSingh said:
As soon as I run the App the First time, it asks for Device type I select GSM.
It proceeds to download the Recoveries and adb.
i waits a few seconds the it just Bugs out. Log attached
I thought it was .net related so I updated it, it worked right after.
Click to expand...
Click to collapse
Thank you for the bug report! I'll get to see whats the issue immediately.
METALLICAM said:
Thanx for all your work ..... this tool is great to have!! 1 thing though, when i fire it up first, it asks for phone type and I select AT&T. The download for recoveries took approximately 20 min. Is this normal? Now the second time I fired it up, it asked again what device and it is downloading the recoveries all over again. Is this normal for your tool? Is it something on my end?
Also, when I check for updates within your tool I get the following error....
wyUpdate exited prematurely
"The wyUpdate executable was not found: E:\......\......\M9Toolkit 1.0\Updater.exe"
The update exe is named wyUpdate.exe but the command is looking for Updater.exe.....
When I double click on the wyUpdate.exe I get "An error occurred" Here's the error...."Error trying to save file: Could not download "http://squabbi.square7.ch/toolkit/m9/updates/wyserver.wys" - a web page was returned from the web server."
Thanx in advance
Click to expand...
Click to collapse
Downloading the recoveries was faster before and it took ages for me as well. So I'll get back to you on that! But as for the updater issue, its my fault again. Change wyUpdate.exe to Updater.exe and it should work. In the next update I'll fix it up to use wyUpdate.
EDIT: I'm not sure why it asked you to download things again. Did you move the exe or rename the folder?
And please download the latest version please! The updater works on that one!
New Update! 1.0.1
Sorry for the broken initial release! Please forgive me!
If you have the 1.0.0.0 version, please remove it and download this one! Thank you!
Download here! Download 1.0.1
Thank you again!
squabbi said:
Sorry for the broken initial release! Please forgive me!
If you have the 1.0.0.0 version, please remove it and download this one! Thank you!
Download here! Download 1.0.1
Thank you again!
Click to expand...
Click to collapse
does 1.01 include Sneakyghost updated htc_fastboot for RUU zip flashing ? Also what version of TWRP does it contain ?
clsA said:
does 1.01 include Sneakyghost updated htc_fastboot for RUU zip flashing ? Also what version of TWRP does it contain ?
Click to expand...
Click to collapse
I haven't seen Sneaky's zip for now, I'll take a look at it later. As for TWRP, it uses Capitan Throwbacks's TWRP: 2.8.6.4.
squabbi said:
I haven't seen Sneaky's zip for now, I'll take a look at it later. As for TWRP, it uses Capitan Throwbacks's TWRP: 2.8.6.4.
Click to expand...
Click to collapse
Here I'll make it easy for ya
http://forum.xda-developers.com/showpost.php?p=59783535&postcount=4
1.2.7
Swapped out recoveries for newer versions.
Swapped out ADB and Fastboot for a newer pack (thanks @LlabTooFeR ) - now this Tool is fully M9 compatible and even flashes large RUU.zips.
Click to expand...
Click to collapse
I got some updated htc_fastboot from someone to try last night and surprisingly, it was capable to read the zip and flash it until it reached the last internal Part 7 (RUU zips are packed with a bunch of sub-zips, usually 7 on the M9), then it failed and my phone was left in nirvana with nowhere to go to. Well. It only failed to flash dzata and boot.img luckily, which are the files in that last part. So I was able to reboot into bootloader and restore some backup until I could buy an SDCard today. Well, anyhow. The updated htc_fastboot was no good either then...
Today i asked around and found someone who knew someone who knew someone who gave him some very much updated htc_fastboot.
Click to expand...
Click to collapse
squabbi said:
Sorry for the broken initial release! Please forgive me!
If you have the 1.0.0.0 version, please remove it and download this one! Thank you!
Download here! Download 1.0.1
Thank you again!
Click to expand...
Click to collapse
Thank you ...... the download recoveries is a bit faster and the update check works....GREAT JOB!
Will this program always ask what device I have and download the recovery every time I fire it up?
METALLICAM said:
Thank you ...... the download recoveries is a bit faster and the update check works....GREAT JOB!
Will this program always ask what device I have and download the recovery every time I fire it up?
Click to expand...
Click to collapse
It doesn't for me.. So I'm not sure why it it for you.. I'll see what I can find out and let you know.
squabbi said:
It doesn't for me.. So I'm not sure why it it for you.. I'll see what I can find out and let you know.
Click to expand...
Click to collapse
FUNNY, now I go to fire it up the 3rd time and it goes straight into the tool, no downloading anything......hmmmmm (I did not have my phone plugged in either time, even the 3rd time.....)
LOL, ok, now the next step "Get Unlock Token".....it reboots my phone into bootloader, creates the txt file for the token but it's blank above where it reads.."Please copy everything above this line!"
Under the Get Unlock Token button it reads....Status: Collecting token.....
Any suggestions?
METALLICAM said:
FUNNY, now I go to fire it up the 3rd time and it goes straight into the tool, no downloading anything......hmmmmm (I did not have my phone plugged in either time, even the 3rd time.....)
LOL, ok, now the next step "Get Unlock Token".....it reboots my phone into bootloader, creates the txt file for the token but it's blank above where it reads.."Please copy everything above this line!"
Under the Get Unlock Token button it reads....Status: Collecting token.....
Any suggestions?
Click to expand...
Click to collapse
Ok that's weird. Haha let me know of there are any other issues.
squabbi said:
Ok that's weird. Haha let me know of there are any other issues.
Click to expand...
Click to collapse
Right now that's the step I'm on and can't get past. I'm all for testing this with my completely stock AT&T M9......anything I can do to help make it easier and better My girlfriend also has a stock M9 so after I get the wrinkles ironed out with mine, I will retest the tool in it's entirety.....
Related
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Hello world !!!
I'm very happy to present you a project of a new kind : The RecoverX Project
The goal of this project is to gather ALL the recoveries for ALL android devices in ONE tool which install them on the devices. RecoverX is coded in C++ thanks to QtSDK and allow to install a recovery on more than 150 different devices !!!
You just have to select your phone and your recovery, to click "Install" and RecoverX does the rest, It's as simple as that
This program have been published on XDA News : Here and here
Behind this tool : over 120 - 180 hours of work, 4200 lines of code and +600 uses by day !!!
Here is the list of the recoveries which are available :
This program require different prerequesties, depending of your device
- Wether you need an unlocked bootloader to flash the recovery partition (and fastboot drivers on your PC)
- Wether you need root access and usb debugging activated (if busybox is not installed, RecoverX will ask you the permission to install it).
To boot in bootloader mode :
- Tape "reboot bootloader" in terminal emulator.
- Or shutdown your device, hold "Volume +", "Volume -" and press power button.
To boot in recovery mode (depending of the device) :
- Tape "reboot recovery" in terminal emulator.
- Or shutdown your device, enter in bootloader mode and select "Recovery".
- Or press back button when the device start.
- Or press volume button when the device start.
- Or tap the screen when the device start.
PS : On the first lauch, the download may fail, please, try to restart the program again.
DOWNLOAD
RecoverX is now available on Google Play : http://forum.xda-developers.com/showthread.php?t=2595072
RecoverX v1.6.9.0 : http://sybiload.shost.ca/recoverx/download.htmlSupported devicesMirror
FEEDBACK
emadido said:
Awesome Post
Thanks Alot
Need this tool very much
Click to expand...
Click to collapse
noradoor said:
And one thing I have to mention is that it allows me to install CWM on Neo V.
Because the auto-installer on Play Store doesn't support this one.
Many thanks to LED.:good:
Click to expand...
Click to collapse
geekynoob said:
If this works for Unlocked Bootloaders.. Thn this shud b made a sticky in my opinion..
Wonderful tool created By a wonderful Brain..
Click to expand...
Click to collapse
PREVIEW
Here is some screenshots
THANKS
The CWM team, for their recovery
The TWRP team, for their recovery
Amon_RA, for his recovery
nobodyAtall & Zihu for their based-recovery
Ansfer for his based-recovery
cray_Doze for his based-recovery
PvyParts, who have help me to fix the ICS support bug
If you have any suggestions or you want to report a bug, just write above this post.
The source code of RecoverX is available on the second post.
To finish, I can only anwer to PM on the week-end so... be patient !!!
PS : Donations are volunteer but allow me to spend more time on the project
Support
Help center :
http://sybiload.shost.ca/recoverx/help.html
The full changelog can be consulted here :
http://sybiload.shost.ca/recoverx/changelog.html
If you want a recovery to be added or updated, please fill this form :
http://sybiload.shost.ca/recoverx/form.php
My GitHub
https://github.com/sybiload/RecoverX
FAQ
Q- My device isn't supported !
A- Just use the form bellow to submit a request.
Q- The recovery is'nt installed even if RecoverX said 'Installation complete'
A- On some devices, the installation may fail even if the device is rooted, due to production builds, drivers issues..
Q- How to root my device ? How to install my driver ?
A- Just search on google and/or on XDA.
Q- Can you make a recovery for this device.
A- I'm not a recovery developper ! I've just created the tool who install them.
Q- I get error 7 ! Help me !
A- Just wait a while and try to disable your firewall. The server could be down or overloaded.
Q- I can't download RecoverX !
A- Idem
Q- I've lost my cat because of your software !
A- I can't help you
Reserved for future use
Here is video of RecoverX, enjoy !!!
Anyone tested it ???
I will add ClockWorkMod Recovery for this devices in v1.1 :
Xperia X10
Xperia X10 Mini
Xperia S
If you want me to add a recovery or a device, just post the thread mink to the recovery/device.
Awesome Post
Thanks Alot
Need this tool very much
is it require to have a root access or not??
@emadido : No problem, did you have tested it ??? If you have any questions or suggestions, do not hesitate !!!
@molimo : Yes, this tool require root access and locked bootloader to install the recovery in the /system/bin folder.
Did I answered your question ???
thnks for the nice tool
but is it need to ublock bootloader
on arc s to install any recovery ??
@ahmadzxc : No, this tool works also on locked bootloader but you need to be on 2.3 stock rom, to have root access and busybox on your device.
Did I answered you ???
LEDelete said:
@ahmadzxc : No, this tool works also on locked bootloader but you need to be on 2.3 stock rom, to have root access and busybox on your device.
Did I answered you ???
Click to expand...
Click to collapse
thanks for the replay
i have arc s and i rooted it
and it's now on ics 4.0.4
i thinks this will work too ??
is this running locked bootloaders?
Awesome and question
Hello!
Awesome stuff.
It is not working for me,here is the result:
Installing clockworkmod recovery...
Waiting for connection...
Push files to temp folder...
2096 KB/s (1945600 bytes in 0.906s)
1263 KB/s (59360 bytes in 0.045s)
38 KB/s (810 bytes in 0.020s)
2100 KB/s (735308 bytes in 0.341s)
Remount device (r/w)...
remount: not found
Copy files to system...
failed on '/data/local/tmp/recovery.tar' - Cross-device link
failed on '/data/local/tmp/charger' - Cross-device link
failed on '/data/local/tmp/chargemon' - Cross-device link
failed on '/data/local/tmp/sh' - Cross-device link
Chmod files...
Unable to chmod /system/bin/recovery.tar: No such file or directory
Unable to chmod /system/bin/charger: No such file or directory
Unable to chmod /system/bin/chargemon: Read-only file system
Unable to chmod /system/xbin/sh: Read-only file system
Installation complete. Press a key to reboot the phone.
(Xperia mini Rooted stock 2.3.4 rom,usb debugging,unknown sources enabled)
@celka : Hum, your device seem to not be rooted correctly because adb can not remount the device :
Remount device (r/w)...
remount: not found
However, I tried to solve the problem by remount the device by an other way and I publish a new version : RecoverX v1.1
Keep me informed if it's work !!!
Thanks in advance,
LEDelete
Have you changed the file charger? On ICS the false charger causes that the phone is in a bootloop wenn its switched off and a usb-charger connected. It couldn´t charge the battery.
Source: http://forum.xda-developers.com/showpost.php?p=27140107&postcount=1
Sorry for this Question but i have seen that your charger file has an old timestamp. I´m not able to test it because my phone is in service center.
@mangdasire : yes, it's work on locked bootloader.
@skuhn1978 : No problem, but this tool isn't for ICS because I didn't find a recovery compatible with ICS so I think the file "charger" works on 2.3.
But you seem to be informed about a recovery for ICS, can you give the the link ??? And did you know if my file "charger" works on Android 2.3 ???
Thanks for your usefull post !!!
Re-rooted my device and tried this new version, now everything was OK.
Big Thanks
LEDelete said:
@celka : Hum, your device seem to not be rooted correctly because adb can not remount the device :
Remount device (r/w)...
remount: not found
However, I tried to solve the problem by remount the device by an other way and I publish a new version : RecoverX v1.1
Keep me informed if it's work !!!
Thanks in advance,
LEDelete
Click to expand...
Click to collapse
LEDelete said:
@skuhn1978 : No problem, but this tool isn't for ICS because I didn't find a recovery compatible with ICS so I think the file "charger" works on 2.3.
But you seem to be informed about a recovery for ICS, can you give the the link ??? And did you know if my file "charger" works on Android 2.3 ???
Click to expand...
Click to collapse
I´m not a developer, i have learned such things by search google and try and error.
The recovery you use CWM 5.0.2.7 should work in ICS only thing is you must replace the charger-file. If charger works in ICS and GB must someone try.
I saw it that the recovery works in ICS because i installed the APP http://goo.gl/XurYt before it was updated for ICS, only change the charger file and it worked perfectly. Now the APP is updated to ICS, you can install it it will create a folder naa... on your SDCARD with the CWM recovery files.
celka said:
Re-rooted my device and tried this new version, now everything was OK.
Big Thanks
Click to expand...
Click to collapse
So you mean RecoverX has installed the recovery correctly on your phone, no ???
Can you confirm it's work, thanks.
@skuhn1978 : Thank you very much, I will add the charger file for ICS in the next version. Thank you very much for your contribution and if you notice an other thing, do not hesitate !!!
ahmadzxc said:
thanks for the replay
i have arc s and i rooted it
and it's now on ics 4.0.4
i thinks this will work too ??
Click to expand...
Click to collapse
what about that people ?!!
LEDelete said:
So you mean RecoverX has installed the recovery correctly on your phone, no ???
Can you confirm it's work, thanks.
@skuhn1978 : Thank you very much, I will add the charger file for ICS in the next version. Thank you very much for your contribution and if you notice an other thing, do not hesitate !!!
Click to expand...
Click to collapse
Yes,it works.I made a backup with it, later will try to install cm7
MR. PARKINSON'S DROIDHD UTILITY 2.0
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
It's DANGEROUSLY REFRESHING
So this tool is a little late to the party, but its so feature rich, you know you might need it, whether you're new to the rooting scene, or you're just looking for a utility with a little more oomph!
Meet the DroidHD Utility 2.0. Packed with more features than you can imagine!
Utility Features:
Stock Stuff Section (Deluxe and Lite Editions Only):
1) Fastboot Restore 9.16.6 4.1.2 Stock Jelly Bean (XT925/926)
2) Fastboot Restore 9.16.6 4.1.2 Stock Jelly Bean (Don't flash recovery)(XT925/926)
3) Fastboot Restore 9.16.6 4.1.2 Stock Jelly Bean (Don't flash modem)(XT925/926)
4) Fastboot Restore Stock Recovery
5) Fastboot Restore Stock Modem
ROMs Section (Deluxe Edition Only):
6) Push BatakangROM test16 and Google Apps to phone
Apps Section (Deluxe Edition Only):
7) Install Safestrap 3.05
8) Install Safestrap 3.12
9) Install voodoos OTA Rootkeeper
10) Install Titanium Backup
Roots, Unlocks, and Recoveries Section:
11) Root Your Phone (Motochopper Method)
12) Unlock Your Bootloader (Motopocalypse Method)
13) Step By Step Guide To Check If Your Bootloader Is Unlocked
14) Remove Bootloader Unlock Warning
15) Flash TWRP Custom Recovery 2.5.0.0
Click to expand...
Click to collapse
Don't be fooled! The DroidHD Utility is always free, whether you choose the Deluxe, Lite, or Ultra Lite edition.
The Editions
Deluxe:
The heaviest utility, at 1.35 Gigabytes when uncompressed, includes the full features set, and is free forever!
Download it Here:
https://mega.co.nz/#!8YpxgbDT!JUBR-Rtgw2igL_BJkK1jKCDyuatJXtOL9kd5rdidJ2k
Lite:
Incase you don't need all of the features included in the Deluxe Edition, you can choose the Lite Edition, which only includes the Stock Stuff and Roots, Unlocks, and Recoveries sections.
Taking up only 974 Megabytes of Hard Drive space when uncompressed, its functional and convenient, and did I mention free?
Download it Here:
https://mega.co.nz/#!1VYTxI5Q!dAIdpQFJOdBdvpKg-NO_GhxBSBVOgfnBUv1HNfKfgrA
Ultra-Lite:
This Utility Here is for the on-the-go rooter, with only Rooting, Unlocking, and Recovery Flashing Utilities built in, this bad boy is the lightest, weighing in at only 3.61 Megabytes when uncompressed. Plus, sensing a pattern yet? Its free!
Download it Here.
https://mega.co.nz/#!BZwWDDBa!LzAphQsCbik8LDoRBb5BI3Kf-OgxsSb4QiRWAXRoa9o
I would love some feedback! So if you try it and like it, thank me, shoot me a pm, email me at [email protected], do whatever!
Cheers!Link to original thread: http://forum.xda-developers.com/showthread.php?t=2236686
Changelog:
2.0 Changelog:
-Updated the layout.
-Did some housecleaning.
-Added more stock recovery options.
-Added remove bootloader unlock warning.
-Added push Batakang ROM Test 16.
-Created Deluxe, Lite, and Ultra-Lite Editions.
-Working on GUI.
1.21 Changelog:
-Fixed a dangerous error where the recovery image wouldn't flash when recovering.
-Added the "Flash TWRP 2.5 Custom Recovery" program.
-Added an option to not flash recovery image.
-Added a step by step guide to see if your bootloader is unlocked.
-When restoring stock ROMs, you will now have the option to delete userdata.
1.1 Changelog:
-Removed the "Push Eclipse" option from the utility.
1.01 Changelog:
-Fixed a typo in the main menu.
-Changed the wording of fastboot option.
-Made a change to the Eclipse/GApps program.
1.0 Changelog:
-Initial Release.
Click to expand...
Click to collapse
My comment would be this is basically a copy of what Matt does with his utilities which isnt too terrible, but you did not credit the real guy that did all the hard work.
CREDITS go to DAN R. for the exploits......writing a script to make life easier is rather simple.....sorry for the rain.
Oh, I did include credit to Dan where its due in the utility, such as the boot loader unlock exploits and the root exploits, but the rest I created myself approximately a day or two before matt released utility 1.20.
Sent from my DROID RAZR HD using xda app-developers app
Mr.Parkinson said:
MR. PARKINSON'S DROIDHD UTILITY 2.0
It's DANGEROUSLY REFRESHING
So this tool is a little late to the party, but its so feature rich, you know you might need it, whether you're new to the rooting scene, or you're just looking for a utility with a little more oomph!
Meet the DroidHD Utility 2.0. Packed with more features than you can imagine!
Utility Features:
Don't be fooled! The DroidHD Utility is always free, whether you choose the Deluxe, Lite, or Ultra Lite edition.
The Editions
Deluxe:
The heaviest utility, at 1.35 Gigabytes when uncompressed, includes the full features set, and is free forever!
Download it Here:
https://mega.co.nz/#!8YpxgbDT!JUBR-Rtgw2igL_BJkK1jKCDyuatJXtOL9kd5rdidJ2k
Lite:
Incase you don't need all of the features included in the Deluxe Edition, you can choose the Lite Edition, which only includes the Stock Stuff and Roots, Unlocks, and Recoveries sections.
Taking up only 974 Megabytes of Hard Drive space when uncompressed, its functional and convenient, and did I mention free?
Download it Here:
https://mega.co.nz/#!1VYTxI5Q!dAIdpQFJOdBdvpKg-NO_GhxBSBVOgfnBUv1HNfKfgrA
Ultra-Lite:
This Utility Here is for the on-the-go rooter, with only Rooting, Unlocking, and Recovery Flashing Utilities built in, this bad boy is the lightest, weighing in at only 3.61 Megabytes when uncompressed. Plus, sensing a pattern yet? Its free!
Download it Here.
https://mega.co.nz/#!BZwWDDBa!LzAphQsCbik8LDoRBb5BI3Kf-OgxsSb4QiRWAXRoa9o
I would love some feedback! So if you try it and like it, thank me, shoot me a pm, email me at [email protected], do whatever!
Cheers!Link to original thread: http://forum.xda-developers.com/showthread.php?t=2236686
Changelog:
Click to expand...
Click to collapse
I have never heard of you and no offense, how could I trust your utility?? i tried downloading it anyway to look at it and it wants me to upgrade my browser??? WTF.....I can't or wouldn't trust this..
DVDDave said:
I have never heard of you and no offense, how could I trust your utility?? i tried downloading it anyway to look at it and it wants me to upgrade my browser??? WTF.....I can't or wouldn't trust this..
Click to expand...
Click to collapse
I understand you don't trust me, me being a "junior member" and all. In the original thread, which is linked at the bottom of the first post, I included the "source code" if that's what you want to call it, for the 1.0 batch file. Plus, since the entire utility is zipped, you can just extract the batch file, right click it, and press the edit button to read all the code. And the reason its asking you to upgrade your browser, is because I believe mega.co.nz (Kim Dotcom's new Megaupload) only works in chrome/Firefox, and maybe Safari?
Sent from my DROID RAZR HD using xda app-developers app
i was using chrome...
DVDDave said:
i was using chrome...
Click to expand...
Click to collapse
What version number exactly?
Sent from my DROID RAZR HD using xda app-developers app
Well, not only did this not remove the BL Unlock splash, it didn't flash TWRP either. The menu when I selected "4" to flash TWRP displayed the same information as option "3" to remove the BL Unlock splash and did nothing. Sorry bud, but your utility is a bust on 926, did you even test it out?
Of course he didn't test it out that's why this utility is useless sorry bud
Sent from my DROID RAZR HD using Tapatalk 2
Didn't remove bootloader screen for me either. Anyone know how I can do it?
Sent from my XT926
nweaver11 said:
Didn't remove bootloader screen for me either. Anyone know how I can do it?
Sent from my XT926
Click to expand...
Click to collapse
Here is the link to an easy way to get rid of the bootloader warning...
http://www.droidrzr.com/index.php/t...f-the-bootloader-unlock-warning-with-1-click/
I don't think Mr. Parkinson knew what he was doing
DVDDave said:
Here is the link to an easy way to get rid of the bootloader warning...
http://www.droidrzr.com/index.php/t...f-the-bootloader-unlock-warning-with-1-click/
I don't think Mr. Parkinson knew what he was doing
Click to expand...
Click to collapse
Does anybody have the download link? I do not want to register for another forum in order to see the link.
Sent from my RazrHd using Tapatalk 2
Droid0351 said:
Does anybody have the download link? I do not want to register for another forum in order to see the link.
Sent from my RazrHd using Tapatalk 2
Click to expand...
Click to collapse
Damn, asking for a lot.....
http://d-h.st/JSx
DVDDave said:
Damn, asking for a lot.....
http://d-h.st/JSx
Click to expand...
Click to collapse
Thanks man!!
Sent from my Droid RazrHD using Tapatalk 2
Sorry but I tried using the utility and I wasn't able to unlock or to root my Motorola GSM Razr maxx HD with JB 4.1.2 android
Maybe I'm doing something wrong, I have bootloader locked so I'm not able to reflash the ROM, if I try to unlock the bootloader but the batch says I need rooted phone, I try to root the phone but batch says:
This program will give you root privelages.
Thank Dan Rosenberg (Djrbliss) for this root exploit!
Feel free to donate to him for his hard work!
Press any key to root your phone.
Premere un tasto per continuare . . .
[*] Waiting for device...
* daemon not running. starting it now on port 5037 *
* daemon started successfully *
[*] Device found.
[*] Pushing exploit...
2718 KB/s (1283460 bytes in 0.461s)
[*] Pushing root tools...
2303 KB/s (91980 bytes in 0.039s)
2913 KB/s (1867568 bytes in 0.626s)
can't find 'apps/Superuser.apk' to install
[*] Rooting phone...
[+] This may take a few minutes.
[-] Failure.
[*] Cleaning up...
[*] Exploit complete. Press enter to reboot and exit.
Premere un tasto per continuare . . .
I checked the "USB Debug" flag.. nothing. Could be because I do not have a SIM card istalled and I', just connected to a Wifi network?
If you have the GSM HD then just get the bootloader unlock code from moto. All XT925 bootloaders are able to be unlocked the normal way.
GoClifGo05 said:
If you have the GSM HD then just get the bootloader unlock code from moto. All XT925 bootloaders are able to be unlocked the normal way.
Click to expand...
Click to collapse
Well, I tried to obtain the unlock code but no way, when I launch fastboot program it return me an error that there's no unlock code, even if my device should be among the unlocking device list...
Anyway, thank you for your answer
Worked for me...
Kinda odd that you've got all these people bashing your work, as you've obviously put a LOT of effort into it. I, for one, found it to be the simplest utility I've tried for the Razr Maxx HD (XT926 on 4.1.2), though one thing worth noting is that nowhere in THIS thread did I find information specifically pointing out that you must FIRST be in AP Fast Boot mode, which I suspect may have been the problem for some of the others here.
I ran the Ultra-Lite Version, and was able to root AND unlock with amazing simplicity. You must root BEFORE unlocking. I think each step took literally less than 5 minutes.
If you want this to work, you MUST do the following:
1) Power off your phone.
2) Hold down the Volume Down and Volume Up while holding down the Power button.
3) Eventually, a menu will appear, and you can let go of the buttons.
4) When this menu appears, press Volume down to scroll until you reach an option titled AP Fast boot, and press volume up to select.
5) Once you reach the AP fast boot section, just use the utility's built in features to reflash the ROM!
(Source = http://forum.xda-developers.com/showpost.php?p=40569678&postcount=9)
(Author = Mr. Parkinson)
I did stumble across one glitch in your program though. At one point, I started to unlock before rooting. At the confirmation screen, it asks if I want to continue, or cancel. Upon pressing cancel, it proceeded to attempt unlocking anyway. I had to manually abort the process. Other than that, I think your utility is fantastic.
This utility saved my phone, I was getting error when trying to flash, I used this tool on my razr maxx hd and now I am back in business.
Sent from my Razr Maxx HD
Man i tried matt's utility and it just crashed after "press any key to continue".
this utility got me back to stock form cm 10.1
thanks
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Introduction
ADB and Fastboot are arguably two of the most indispensable tools used when working with Android devices. If you really want to modify, debug, and tweak along with their countless uses in rooting, and other procedures ADB and Fastboot are a must for any Android device owner. Typically if you want to install ADB and Fastboot you have to download and setup the Android SDK (If you really want to learn about Android Development I highly recommend downloading and installing the full Android SDK from here), but this can be unnecessary for people who just want to install ADB and Fastboot. To simply the process I created a windows installer that will install the latest version of ADB and Fastboot for you quickly and easily. The total installation of Minimal ADB and Fastboot is around 2 MB in size (Compared to the 90+ MB size of the Android SDK Tools, and 425+ MB size of the complete Android SDK) making it very lightweight.
Click to expand...
Click to collapse
Screenshots
Features
Easily Install ADB and Fastboot with a simple to use installer
Lightweight, total installation around 2 MB in size
Click to expand...
Click to collapse
How to Install
Prerequisites
Your device is plugged into your computer
You have USB Debugging enabled under Developer Options (Note: This may be listed as ADB Debugging on some ROM's)
You have installed the necessary drivers and your computer is recognizing your device
Download the Minimal ADB and Fastboot setup.exe from here
Follow the Installers instructions and select where you would like to install Minimal ADB and Fastboot too (For simplicity I choose to install it to the Desktop)
After you have chosen where to install Minimal ADB and Fastboot too select whether you would like to create a Start Menu Folder or not for the instalation
Once you have chosen where to install it to and if you want to create a Start Menu Folder select the install option
After the Installation Wizard has completed you can select to start Minimal ADB and Fastboot
You can also start Minimal ADB and Fastboot by navigating to the Start Menu Folder you choose to create during installation or the desktop shortcut you choose to create and selecting Minimal ADB and Fastboot
You should now see a command window open, with the command window open you can now issue ADB and Fastboot commands to your device
For more information on issuing commands to your device using ADB and Fastboot I would recommend taking a look at this guide on ADB and this guide on Fastboot.
Click to expand...
Click to collapse
Changelog
*For previous versions changelog please click the "Click To Show Content" button
*Updated ADB and Fastboot to latest version 1.0.3.6 release candidates Revision 0e9850346394-android
Version 1.4.3 (2-9-18)
*Updated ADB and Fastboot to version 1.0.3.9
*Automated build tools initial version uploaded to github
Version 1.4.1 (10-22-16)
*Updated ADB and Fastboot to latest version 1.0.3.6 release candidates
*Uploaded Zip file containing portable version meaning no setup EXE just unzip and use the tools!
Version 1.4 (4-27-16)
*Updated ADB and Fastboot to latest version 1.0.3.5 release candidates
*Prepared for eventual open sourcing of Minimal ADB and Fastboot
Version 1.3.1 (8-9-15)
*Fixed bug with compatibility on 32-bit Windows Operating Systems
*Updated ADB and Fastboot to latest version 1.0.3.2 release candidates
Version 1.3 (6-26-15)
*Updated ADB to version 1.0.3.2 latest release candidate
*Updated Fastboot to latest version
*Smaller size 0.75 MB
*Implemented some behind the scenes stuff to get ready for cross platform release
Version 1.2 (11-6-14)
*Updated ADB to version 1.0.3.2
*Updated Fastboot to latest version
Version 1.1.3 (7-18-13)
*Fixed problem that was causing a force close with the desktop shortcut on Windows 8/8.1
Version 1.1.2 (6-28-13)
*Added start menu shortcut that open a command prompt window in the directory where you installed Minimal ADB and Fastboot to allowing you to easily run ADB and Fastboot commands
*Added option to create desktop shortcut for command prompt window in Minimal ADB and Fastboot directory
Version 1.0 (6-10-13)
*Initial version uploaded
Click to expand...
Click to collapse
Downloads
For 32-bit and 64-bit Windows Operating Systems:
*To download previous versions please click the "Click To Show Content" button
Download Version 1.4.3 Here
MD5 Checksum: 689D0602B44ADF8DD53165C24F80CBC9
Download Version 1.4.3 Portable Here
MD5 Checksum: ECB45F9CD6160D81DE7941F73A911063
Download Version 1.4.2 Here
MD5 Checksum: 9AC9D9AB43E3AD5F0355575B88802685
Download Version 1.4.1 Here
MD5 Checksum: 63DF1EC9340D9E43D7C3216E05BC8D88
Download Version 1.4.1 Portable Here
MD5 Checksum: D7B1C009C87C77AAF045FA3ED239E591
Download Version 1.4 Here
MD5 Checksum: 13F90B6A5FBFA6F90E92B0D3262ED1B1
Download Version 1.3.1 Here
MD5 Checksum: D72D659D2B206C14B6FEA6F1E7311A63
Download Version 1.3 Here
MD5 Checksum: D14849CE2F1FA6CCC726823FCD0D723F
Download Version 1.2 Here
MD5 Checksum: 813C54CDF3B461CD485E23F327ADF725
Download Version 1.1.3 Here
MD5 Checksum: 47334BD7837C379F44A96B9FEE9F66E7
Download Version 1.1.2 Here
MD5 Checksum: AA291CD76C224EB6CCC061B80F89074F
Download Version 1.0 Here
MD5 Checksum: B7E99321CBA3711DCAB7D3885BAAD336
Dropbox Mirror:
*To download previous versions please click the "Click To Show Content" button
NOTE: Due to the high traffic it causes I will no longer be mirroring on Dropbox newer builds. A new mirroring solution is in the works :good:.
Download Version 1.4.1 Portable Here
MD5 Checksum: D7B1C009C87C77AAF045FA3ED239E591
Download Version 1.4 Here
MD5 Checksum: 63DF1EC9340D9E43D7C3216E05BC8D88
Download Version 1.4 Here
MD5 Checksum: 13F90B6A5FBFA6F90E92B0D3262ED1B1
Download Version 1.3.1 Here
MD5 Checksum: D72D659D2B206C14B6FEA6F1E7311A63
Download Version 1.3 Here
MD5 Checksum: D14849CE2F1FA6CCC726823FCD0D723F
Download Version 1.2 Here
MD5 Checksum: 813C54CDF3B461CD485E23F327ADF725
Download Version 1.1.3 Here
MD5 Checksum: 47334BD7837C379F44A96B9FEE9F66E7
Download Version 1.1.2 Here
MD5 Checksum: AA291CD76C224EB6CCC061B80F89074F
Download Version 1.0 Here
MD5 Checksum: B7E99321CBA3711DCAB7D3885BAAD336
Click to expand...
Click to collapse
Credits
Code:
*Google for developing ADB and Fastboot
Click to expand...
Click to collapse
Thank you to CONAN TROUTMAN and the rest of the XDA writers for featuring this on the portal on June 12, 2013 !
Tools that Use Minimal ADB and Fastboot
[tool][app] 10 min adb/fastboot for htcm8 on win8 an win8.1 Thread By: Tigerstown
Note: If you would like to create a tool that uses Minimal ADB and Fastboot you are free to do so, all I ask is that you link to the original thread and give proper credit . Additionally if you would like your tool or guide that uses Minimal ADB and Fastboot to be added to this list please let me know.
Nice tool! I see you linked my guide... That's more the reason I should finish it haha!
Anyway this would be perfect for anyone looking for, as you rightly put it, the two most indispensable tools for android, and don't want anything but.
Don't know how possible or easy it is to implement but auto adding a path in environmental variables would be a great addition to your .exe
Either this or maybe adding instructions how to do so, anyway I'll be sure to link this, great work!
Sent from my Nexus 4 using xda premium
awesome,many thanx for this work,thats what im waiting for a long time.:good::good:
demkantor said:
Don't know how possible or easy it is to implement but auto adding a path in environmental variables would be a great addition to your .exe
Either this or maybe adding instructions how to do so, anyway I'll be sure to link this, great work!
Sent from my Nexus 4 using xda premium
Click to expand...
Click to collapse
Thanks! I'll definitely think about adding in an environmental variable for the path to the .exe or as an option once the user setups the tool. I'll make it optional as some people don't like to mess with how they have there environmental path variable setup in Windows. Also thank you very much for linking it .
Sent from my SCH-I535 using xda premium
shimp208 said:
Thanks! I'll definitely think about adding in an environmental variable for the path to the .exe or as an option once the user setups the tool. I'll make it optional as some people don't like to mess with how they have there environmental path variable setup in Windows. Also thank you very much for linking it .
Sent from my SCH-I535 using xda premium
Click to expand...
Click to collapse
is this 64 bit or 32 bit ?
iamashwin said:
is this 64 bit or 32 bit ?
Click to expand...
Click to collapse
This tool will work on either 32-bit or 64-bit.
Sent from my SCH-I535 using xda premium
Cannot download. Google drive is currently unreachable.
[email protected] said:
Cannot download. Google drive is currently unreachable.
Click to expand...
Click to collapse
Download link was working fine for me for Google Drive but I have also mirrored the download in my Dropbox which can be downloaded from here .
This really helps me out since I have a couple of PCs located at different cities.
And when I want to flash the latest rom using ADB- or Fastboot-free computers, I don't have to download the whole Android SDK any more.
Big thanks to you,bro.:laugh:
shimp208 said:
This tool will work on either 32-bit or 64-bit.
Click to expand...
Click to collapse
suggest that you put this down under "changelog" or "downloads" along with the md5 checksum. thanks for your work. will try it out soon.
Suggestion
Nice tool .
May I suggest that you modify the installer so that it adds a shortcut to the startmenu that opens the commandbox in the folder specified during installation?
After installation I mannually created a shortcut in the startmenu myself with this line:
Code:
%windir%\system32\cmd.exe /k "cd /d d:\ADB and Fastboot"
in the target.
Small, fast & simple installer needed for any power Android user
Edit: Updated sig
Thanks
best app ever!! i have waiting for app like this forever!!!! nice 1 bro... bookmarked!! for future !! thx u very much.
I was literally busy downloading the Android SDK when I saw this featured on the XDA portal Works a charm on Windows 8 Pro x64. Thanks very much!
Very very helpful
thank you very much
keep going
Guys... Just wanted to know... When I run the exe will it require internet connection... As my data card is broken....
Sent from my Desire S using Tapatalk 4 Beta
zeus.lny said:
Guys... Just wanted to know... When I run the exe will it require internet connection... As my data card is broken....
Sent from my Desire S using Tapatalk 4 Beta
Click to expand...
Click to collapse
Once you have downloaded the .exe file no internet connection is required during installation.
Sent from my SCH-I535 using xda premium
So...to flash boot.img wht command i need to use...
Sent from my Desire S using Tapatalk 4 Beta
---------- Post added at 09:34 PM ---------- Previous post was at 09:32 PM ----------
Trying to install cm 10.1 build 21 on my devise...
Sent from my Desire S using Tapatalk 4 Beta
---------- Post added at 09:41 PM ---------- Previous post was at 09:34 PM ----------
When i try command fastboot flash boot boot.img its stuck at waiting for devise
Sent from my Desire S using Tapatalk 4 Beta
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This is an experimental build of the open ROM Omni5.1 for our Samsung GalaxyTab Plus.
Get the media patch for the 20150819 build in the 7.7 thread.
Detail can be found in 7.7 thread
Before you post, read the 7.7 thread first!
*** Post with no detail will be ignored ***
Know issues:
Now is in an early stage. Read carefully before flashing.
1. Wifi direct not fully working
2. May be more....
Downloads: :highfive:
AFH: https://www.androidfilehost.com/user/?w=settings-dev-files&flid=28293
d-h.st: http://d-h.st/users/danielhk/?fld_id=44273#files
mirror: 百度网盘
Use the latest Delta gapps: http://forum.xda-developers.com/showthread.php?t=2997368
** Latest TWRP (2.8.6.x or above) is required.
Omni is not rooted. To root, flash the latest SuperSU-24x.zip in recovery.
Credits: :good:
** The OmniROM team who have such a good idea and their hardworks
** All those who donate to me. Giving me the resources to upgrade my PC and accessories!
** All those who help our cool tab's developments!
Donations:
OMG.i'm such an idiot.roll out and i saw the twpr 2.8.6.0.I wasn' t see that before.flashing succes.Every thing work smoth and fast.
Main problem until now:
1.Brightness slide broke->soluion is download this app and disable "Automatic Brightness" https://play.google.com/store/apps/details?id=net.ailuro.android.settings.screen.brightness
2.Wifi passw clear LOL ~
3.Setting interface xxx
4.Unable to use Simcard
5.HW video notwork.BUT- you can try UC Browser for online video(Fb,youtube,...) like an option https://play.google.com/store/apps/details?id=com.UCMobile.intl .Not done yet,you need to restore the flash cache from 4.4 in titanium backup from the link below,other wise ,it don't work.
6.Can't upload file!
7.I don't see any problem left with reboot.app and system.I'm a BIG dump dump when forget to check update twpr ...what a shame (='.'=)
*.Root: http://download.chainfire.eu/supersu
Trung Gs said:
In TWPR ,after wipe,Omni(27mar2015) p6200 build and gapps5.1 is flashing succes.But,when i reboot system,the screen is black and my tab can't boot into homescreen.I try again with only rom,it still the same problem.It 's hard to say when i have try every way i know. what a shame ≧﹏≦. I hope u can't find out what problem with this build from other people too or the error come from my mistake.
Click to expand...
Click to collapse
Guess might be your tab............works for me. just perform a wipe, reboot the back into recovery and wipe once more.
Install rom, wipe and install rom again.
Reboot and see if it works for you. (can flash gapps later and super su if u need)
Can't access download link
Its weird! AFH says I dont have access to file, Dev-Host just direct me to their homepage, and mirror link is in chinese so I dont have any idea what buttons to hit. Is it just me? Anyone here who can guide me how to download the file?
omike123 said:
Its weird! AFH says I dont have access to file, Dev-Host just direct me to their homepage, and mirror link is in chinese so I dont have any idea what buttons to hit. Is it just me? Anyone here who can guide me how to download the file?
Click to expand...
Click to collapse
Edit 1:
Downloading now! Using google chrome I was able to translate mirror link page to English.
Edit 2:
Successfully flash the Rom via TWRP 2.8.6.0
As mentioned in the OP
- quicksettings pulldown can only be pulled once.
- adjusting brightness slider do nothing
- torch is working
- system apps seems to load faster than cm12.
One thing that caught up my attention is that simcard is not recognized. Have to goto settings/about tablet and found out that baseband version is unknown. Shame cause I really think this rom is more fluid compare to cm12.
I was unable to test user's app due to simcard unavailability, hence 3G as well, as I heavily dependent on it.
Also noticed that 1st & 2nd boot is ok but on 3rd boot is only showing blank screen ( omni bootlogo not showing ) have to longpress power button a couple of times until omni bootscreen appears.. P6200 user here.
Thanks again to this ROM, pretty much stable , no soft reboots. Battery is good, Minor issues i could see.
Video playback is still an issue i believe, even in YouTube.
Thanks again
If this rom could see the daylight I will really love it. It's much better than cm12 . Aside the baseband issue in p6200 really would have preferred this .
Sent from my GT-P6200 using xda Forums PRO
Have just installed latest version 20150518. Installation process without any problem. System is running stable.:good:
But SIM-card is not found. Tried several times.
It's no problem with CM12.1 rom. So I'm back to CM12.1.
uli-hh said:
Have just installed latest version 20150518. Installation process without any problem. System is running stable.:good:
But SIM-card is not found. Tried several times.
It's no problem with CM12.1 rom. So I'm back to CM12.1.
Click to expand...
Click to collapse
So unknown baseband issue has'nt been fix yet?
omike123 said:
So unknown baseband issue has'nt been fix yet?
Click to expand...
Click to collapse
That's what it shows in settings/about phone
uli-hh said:
That's what it shows in settings/about phone
Click to expand...
Click to collapse
Well I guess I'll just have to wait for the next release. I'm sure @daniel_hk would fix this in future updates.
omike123 said:
Well I guess I'll just have to wait for the next release. I'm sure @daniel_hk would fix this in future updates.
Click to expand...
Click to collapse
I don't have problem showing the baseband with or without a sim card. Don't know why some p6200 can't. It's the same modem chip and I'm using the same lib for both too.
Clean flash, Wait for a few minutes, etc.
Can anyone confirm that?
If really can't, in a terminal emulator type:
su (already rooted of course)
rild
see if any error message
here is the result:
WARNING: linker: libsec-ril.so has text relocations. This is wasting memory and prevents security hardening. Please fix.
rm: /data/misc/radio/dlink: permission denied
it is also showing invalid IMEI and unknown baseband version.
PugeAko said:
here is the result:
WARNING: linker: libsec-ril.so has text relocations. This is wasting memory and prevents security hardening. Please fix.
rm: /data/misc/radio/dlink: permission denied
it is also showing invalid IMEI and unknown baseband version.
Click to expand...
Click to collapse
The first one is just a warning because of the only old blob we have.
The second line means the daemon is not start. I'll look into it but I need someone with a p6200 to test for me.
daniel_hk said:
The first one is just a warning because of the only old blob we have.
The second line means the daemon is not start. I'll look into it but I need someone with a p6200 to test for me.
Click to expand...
Click to collapse
Willing to do that.
edwin270 said:
Willing to do that.
Click to expand...
Click to collapse
I think I found the reason. There is a file missing. View attachment libsecril-client.zip
unzip the above zip will get the file libsecril-client.so. Copy the file to /system/lib with a root browser (eg. ES FileExplorer) will do.
Hoping it work for t869 too. t869 owners are welcome to test too.
Good luck!
PS. Will include it in the next build
daniel_hk said:
I think I found the reason. There is a file missing. View attachment 3324813
unzip the above zip will get the file libsecril-client.so. Copy the file to /system/lib with a root browser (eg. ES FileExplorer) will do.
Hoping it work for t869 too. t869 owners are welcome to test too.
Good luck!
Click to expand...
Click to collapse
Was about to try that and alert you. Compared the lib folder for cm12.1 to that of omni and Realized the same missing libsecril-client.so and a couple of others. Looks like you got to it first. Anyway thinking of creating a flashable package for it. [emoji4] [emoji4] [emoji4]
OTG -Wifi???
@daniel_hk This may be stupid but i have to ask u.Does this kernel support USB Wifi with OTG?
Tried the lib files provided and a couple of others from cm12.1...................same old. Installed CM12.1 again and tried the rild check and got the same error as mentioned by PugeAko , though baseband is working with that rom.
Will be pulling the lib from stock MF1 rom for our dear p6200 soon, to see what comes of it.
Will post my findings soon.
Edit:
Checked radio directory in cm12.1 vrs OMni and some files are missing in Omni. Pulled that from cm12.1 but this constant black screen booting of Omni is making me frustrated at the moment. Too much black screen. Trying to see if I can get a boot.
Edit2:
Giving up. Don't know what it is but cannot endure this constant black screen any longer and time is not a luxury that I can afford now, its preventing me from helping figure out how to fix this baseband issue. Going back to the buggy cm12.1 rom. This rom is promising though.
Trung Gs said:
@daniel_hk This may be stupid but i have to ask u.Does this kernel support USB Wifi with OTG?
Click to expand...
Click to collapse
Each USB Wifi probably have different chips which requires drives supplied by the manufacture. For it to work, it requires HAL drivers/firmwares too. Normally there is a CD or place to download. Window might have some driver for a few chips. Linux (Android) would be another story.
Normally, a kernel would only have the drivers for the on board chips.
edwin270 said:
Tried the lib files provided and a couple of others from cm12.1...................same old. Installed CM12.1 again and tried the rild check and got the same error as mentioned by PugeAko , though baseband is working with that rom.
Will be pulling the lib from stock MF1 rom for our dear p6200 soon, to see what comes of it.
Will post my findings soon.
Edit:
Checked radio directory in cm12.1 vrs OMni and some files are missing in Omni. Pulled that from cm12.1 but this constant black screen booting of Omni is making me frustrated at the moment. Too much black screen. Trying to see if I can get a boot.
Edit2:
Giving up. Don't know what it is but cannot endure this constant black screen any longer and time is not a luxury that I can afford now, its preventing me from helping figure out how to fix this baseband issue. Going back to the buggy cm12.1 rom. This rom is promising though.
Click to expand...
Click to collapse
cm12.1 is probably the wrong place to try. Omin for p6800 would be the wiser choice.
Anyway, I will try to get it work on the next build.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This is the support thread of PixelFlasher
(PixelFlasher is an open-source self contained GUI tool to facilitate Pixel phone device flashing/rooting/updating with extra features).
Note: This thread is meant for issues and problems faced in Google Pixel 6a devices, generic issues that are device agnostic should be discussed in the main thread.
For full details on where to download / usage and feature set of the tool, visit the main thread at XDA or the project's Github page.
Troubleshooting:
If you need support or assistance, the best way to get is by generating a support file from within PixelFlasher.
You can hit that big Support button on the main screen, or select it from the Help menu.
The generated support.zip file is sanitized (redacted) to keep your sensitive information (username device id ...) private.
This seems interesting. I was just looking into options to disable verity and or verification, root, and flash a custom kernel. It seems this application is an all in one. If all goes as planned, will my data and apps remain? Or am I basically starting all over. My bootloader is already unlocked. Thanks for sharing.
chopt51 said:
This seems interesting. I was just looking into options to disable verity and or verification, root, and flash a custom kernel. It seems this application is an all in one. If all goes as planned, will my data and apps remain? Or am I basically starting all over. My bootloader is already unlocked. Thanks for sharing.
Click to expand...
Click to collapse
If you don't choose wipe data, or force in flash options, then you should keep your data.
I have my 6a connected with usb. I chose where my platform tools are in a directory but it doesnt find a device via adb. Yet cmd shows an adb connection.
USB debugging turned on?
tlxxxsracer said:
Yet cmd shows an adb connection.
Click to expand...
Click to collapse
Explain what you mean by that?
badabing2003 said:
Explain what you mean by that?
Click to expand...
Click to collapse
usb debugging was on. when I run an adb/fastboot in cmd within the same directory my device is recognized
tlxxxsracer said:
usb debugging was on. when I run an adb/fastboot in cmd within the same directory my device is recognized
Click to expand...
Click to collapse
Please be clear and explicit, exactly what you ran and what response you got, please also generate support.zip file from the help menu of PixelFlasher and post it here.
There is no reason for it not to be detected if you're command detects it.
New Release:
Aug 24, 2022 v3.6.0 release
When a device is selected, the Bootloader version is displayed. (Useful for Pixel 6* devices with ARB). Works in adb and fastboot modes.
Added a button to dump full device info (useful for troubleshooting). Works in adb and fastboot modes.
Improved tooltips.
Hello,
I have a pixel 6a on A12 rooted with Magisk.
I tried to upgrade to A13 with PixelFlasher (v3.6.0) with the option to flash all the slots and now I'm stuck in loop.
I tried to use fastboot command to flash again with A13 with no result. I also tried to change the current slot.
The weird thing is that I still have the message that said the bootloader is unlocked...
Any ideas?
jpdurand31 said:
Hello,
I have a pixel 6a on A12 rooted with Magisk.
I tried to upgrade to A13 with PixelFlasher (v3.6.0) with the option to flash all the slots and now I'm stuck in loop.
I tried to use fastboot command to flash again with A13 with no result. I also tried to change the current slot.
The weird thing is that I still have the message that said the bootloader is unlocked...
Any ideas?
Click to expand...
Click to collapse
If you can post support.zip file from help menu I can take a look.
If you want more info, i'm 100% available!
jpdurand31 said:
If you want more info, i'm 100% available!
Click to expand...
Click to collapse
Hmmm ...
I don't see any flashing logs in PixelFlasher, are you sure you flashed in PixelFlasher?
I see you started with PixelFlasher 3.4.0 and upgraded to 3.6.0; good
I see at first you did not have Android Platform Tools installed, and then had version 28.0.2-debian; bad, this is an old version, you should click on the blue link next to the Android Platform Tools and download the latest (don't install from package manager, those are usually old, just download the latest and unpack wherever you want, and point to it in PixelFlasher)
You started in adb mode (good), processed the firmware in PixelFlasher, but that is where you stopped, you did not attempt flashing in PixelFlasher (not sure what you did, but it would help to know)
On next attempt (one hour later) your device was in bootloader mode.
Then you tried disabling magisk, which didn't work because that feature requires adb mode, and your phone is stuck in fastboot mode.
You cannot create a patch file in fastboot mode, it needs to be in adb mode.
And please please don't dare to lock your bootloader, I see you attempted and then cancelled,
Code:
2022-09-02 18:25:29 Lock Bootloader
WARNING!!! WARNING!!! WARNING!!!
NEVER, EVER LOCK THE BOOTLOADER WITHOUT REVERTING
TO STOCK FIRMWARE OR YOUR PHONE WILL BE BRICKED!!!
Do you want to continue to Lock the device bootloader?
Press OK to continue or CANCEL to abort.
2022-09-02 18:25:42 User Pressed Cancel.
Aborting ...
If you lock your bootloader before fixing your device, you will be locked out forever (bricked)
So at this point what are your choice and how can you fix this?
1- get the latest Android Platform Tools
2- If PixelFlasher detects your device, check if it is in fastboot mode (f.b) or adb mode.
Select the firmware, process it, this will show the boot.img file
Select the boot.img file and choose keep data and hit Flash.
Yes I know, you will lose root because you're not flashing a patched boot.img, but you can always re-root if you recover your device.
Alternately, what happens if you select in PixelFlasher to reboot the device into System.
Does it reboot? and if it does, does it end up in adb mode of fastboot mode?
One other option you have is to flash OTA in sideload mode.
Report back, and make sure you capture all the manual steps you perform outside of PixelFlasher.
PixelFlasher logs would tell me everything you do in PixelFlasher, you can submit a new one after your operations.
Good luck
Thanks for your response and the detailed process.
I was fooled by the version of the package that was in 33...
By upgrading the Android Platform Tools to the latest version, I could update to Android 13.
Thanks a lot for the help and the reactivity!
New Release:
Sep 04, 2022 v3.7.0 release
New Feature: Install Magisk into the phone, PixelFlasher displays information about the latest available Magisk versions (stable, beta, canary, debug) and offers the choice to install a selection.
New Feature: Install compatible apk file onto the device from PixelFlasher menu.
Check Android Platform Tools version and warn if it is old.
Block flashing when stock flash_all.bat file is tampered with.
Don't bother with flashing if bootloader is locked.
More validations and exceptions handling.
Improved logging.
3.7.0 does not start for me on Windows 10. It never appears in my task list as running. 3.6.0 is working fine.
JudasD said:
3.7.0 does not start for me on Windows 10. It never appears in my task list as running. 3.6.0 is working fine.
Click to expand...
Click to collapse
Thanks for reporting and sorry for your troubles.
Can you please open a command prompt, navigate to PixelFlasher 3.7.0 and run it from command prompt (just type PixelFlasher.exe), see if it displays an error in the console.
Can you also please generate a support.zip file using PixelFlasher 3.6.0 ?
It should capture the error PixelFlasher 3.7.0 encountered.
Thank you for the help. The issue has now been resolved after reboot.
Launching 3.7.0 via cli displayed no error message. I went to create support.zip with 3.6.0 and my computer BSODed. After reboot, 3.7.0 runs just fine. Apologies for the false alarm.
JudasD said:
Thank you for the help. The issue has now been resolved after reboot.
Launching 3.7.0 via cli displayed no error message. I went to create support.zip with 3.6.0 and my computer BSODed. After reboot, 3.7.0 runs just fine. Apologies for the false alarm.
Click to expand...
Click to collapse
No need for apology, happy to hear that the issue now resolved.
Not sure if this should be of concern, but upgrading to today's Android release, I got this (very early on, while selecting the device and firmware):
Code:
2022-09-12 18:44:06 ERROR: Exception during Magisk modules processing
Exception: not enough values to unpack (expected 2, got 1)
Everything seemed to work fine, though.